* code deduplication. Use functions from iso15693.c
* speedup CodeIso15693AsReader()
* invert reader command coding. 0 now means 'unmodulated' ( = field on)
* decode SOF only as a valid tag response in Handle15693SamplesFromTag()
* complete decoding of EOF in Handle15693SamplesFromTag()
* determine and write correct times to trace
* FPGA-change: generate shorter frame signal to allow proper sync in StartCountSspClk()
* modify StartCountSspClk() for 16bit SSC transfers
* whitespace in util.c
* add specific LogTrace_ISO15693() with scaled down duration. Modify cmdhflist.c accordingly.
* allow 'hf 15 raw' with single byte commands
* check for buffer overflow, card timeout and single SOF in 'hf 15 raw'
* fix tag response timing. iClass differs from ISO15693 in this respect.
* speedup CodeIso15693AsTag()
* TransmitTo15693Tag(): don't send unmodulated start of SOF
* reduce modulation depth in hi_simulate.v
* calculate CRC for configuration block when simulating
* Show real response time instead of planned response time in 'hf list iclass'
* add simulation of multiple pages (PAGESEL by @sherhannn9)
* maintain cipher states per page
* update cipher state after UPDATE commands (@sherhannn9)
* add simulation of personalization mode
* respond with SOF on HALT
* display "<SOF>" instead of "0f" in 'hf list iclass'
* standard LED handling
* chg to reader command decoder in iso15693.c (require no modulation before SOF)
* add 'has_been_low_for' logic to hi_simulate.v (same as in other FPGA modes, default to "no modulation")
* add simulation of chip status (IDLE, ACTIVE, SELECTED, HALTED)
* check ACSN on SELECT
* add simulation of RESELECT
* always check length of reader commands
* fix printing of NR, MAC in sim 2 mode
* fix response length to CHECK command
* fix debug print on unhandled commands
* deduplicate: use sim functions from iso15693.c
* fix times in tracelog and 'hf list iclass' (sim only)
* don't check parity in 'hf list iclass'
* fix timing in TransmitTo15693Reader()
* chg: write new dump file format by @mceloff
* chg: rename 'hf mfu dump' option 'n' to 'f' to align with other commands and RRG repo
* chg: replace ISO14443A_CMD_READBLOCK by MIFARE_CMD_READBLOCK, same for WRITEBLOCK
* fix: mifare_ultra_readblock() returned 14 bytes instead of 16
* chg: param_gethex_ex() now checks maximum output buffer length
* chg: ul_comp_write() was incomplete and for magic testing only
* fix: 16bit ULC counter had been displayed as 32bit
* chg: add check for 7 Byte UID, drop check for ATQA in type identification GetHF14AMfU_Type()
* fix: send HALT instead of dropping field in order to maintain a defined state
* chg: DropField() when command ends
* chg: check for invalid page ranges in 'hf mfu dump'
* fix: print correct lock bits when page range is used
* fix: do not write (incomplete) dumpfile when page range is used
* add: use UID for filename when no filename is given (RRG repo)
* chg: don't clear trace on each ULC authentication, clear trace at beginning of each command
* fix: don't send (DESFire?) deselect command after authentication
* Add raw HF signal plotting
* new fpga module hi_get_trace.v - store A/D converter output to circular buffer on FPGA
* new command 'hf plot' - pull data from FPGA and display it in Graph Window
* fixing hf 15: implement hf 15 snoop
* rename hf 15 record to hf 15 snoop
* speedup sampling / decoding:
* new FPGA mode FPGA_HF_READER_RX_XCORR_AMPLITUDE implements amplitude(ci, cq) on FPGA
* inlining the decoders in iso15693.c
* inlining memcpy/memset in LogTrace()
* giving up the moving correlator for SOF in Handle15693SamplesFromTag
* decode more of EOF in Handle15693SamplesFromTag()
* some refactoring
* rework iso14443b device functions
* hf_read_rx_xcorr.v: transfer i/q pair in one 16bit frame
* hi_read_tx.v: invert ssp_dout. When nothing is transferred (ssp_dout=0), this results in no modulation (carrier on)
* adjust arm sources accordingly
* iso14443b.c: switch off carrier after hf 14b sri512read and hf 14b srix4kread
* iso14443b.c: fix DMA circular buffer handling
* move to separate files mifaresim.[ch]
* check CRC of commands
* don't execute commands without successfull authentication
* ensure correct timing of REQA, WUPA, ANTICOL and SELECT responses
* trace reader commands immediately, only fix start time after tag response. Decreases time to be ready for next reader command.
* remove iso14443-4 remnants
* trace raw reader commands instead of decrypted ones
* some refactoring
* fix hf mf sim
* timing: decrease time to get ready for new reader commands
endless loop in reader if no tag was found
button press on pm3 did not cancel.
led_b was left on in some cases
also moved 14b detection to last in hf search to help speed up the
command for the other tags. 14b is slow (does multiple tests)
Thanks to @Fl0-0 and @pwpiwi for their idenfication of some of the
issues.
memory locations in code are now accurate and the CC output is not
corrupted by the config's crc.
also the looping and flags for what to read are now correctly
implemented in the code.
any memory from BigBuf[]. This is required because FpgaDownloadAndGo() might
allocate, use, and free most of BigBuf[] when decompressing FPGA configs.
- cleanup: remove rests of deprecated "end of trace markers" (0x44)
- provided a BigBuf_malloc() function to dynamically allocate parts of BigBuf
e.g. for DMA-Buffers, Frame-Buffers, Emulator-Memory
- the whole rest of BigBuf is now available for traces (instead of a small fixed amount)
- send actual traceLen together with trace data
- changed client side to cope with varying traceLen
- changed small buffers to automatic variables instead of parts of BigBuf
CHG: USB_CMD_DATA_SIZE is now used as maxsize for transfer of data between client and pm3device
CHG: suggested a fix for the underscore problem in ioclass\fileutils.c
ADD: tnp3xx support
ADD: nxp tag idents.
ADD: identifiction of chinese backdoor commands to hf 14a reader.
