* rework iso14443b device functions
* hf_read_rx_xcorr.v: transfer i/q pair in one 16bit frame
* hi_read_tx.v: invert ssp_dout. When nothing is transferred (ssp_dout=0), this results in no modulation (carrier on)
* adjust arm sources accordingly
* iso14443b.c: switch off carrier after hf 14b sri512read and hf 14b srix4kread
* iso14443b.c: fix DMA circular buffer handling
* ISO15693 device side improvements
* increase accuracy by doubling the sample frequency (hi_read_rx_xcorr.v)
* adjust armsrc/iso15693.c and client/cmdhf15.c accordingly
* use more accurate approximation for sqrt(ci^2 + cq^2)
* improve EOF detection (was often mistaken for Logic0, resulting in "error, uneven octet! (extra bits!)")
* hi_read_r_xcorr.v: avoid overflows during accumulation and truncation
* explicitely cast unsigned ADC samples to signed
- fix: IQ demodulator (FPGA)
- fix: approximately align reader signal delay to tag response delay (FPGA)
- fix: remove deprecated RSSI calculation to improve decoder speed (iso14443b.c)
- fix: better approximation of signal amplitude to avoid false carrier detection (iso14443b.c)
- fix: remove initial power off in iso14443b raw command (iso14443b.c)
- add: enable tracing for iso14443b raw command (iso14443b.c)
- fix: client crashed when checking CRC for incomplete responses (iso14433b.c)
- speeding up snoop to avoid circular buffer overflow
- added some comments for better documentation
- rename functions (iso14443 -> iso14443b)
- remove unused code in hi_read_rx_xcorr.v
- most significant bit of tag data (which happens to be the sign bit)
had been dropped when snooping (FPGA change)
- avoid trying to decode both tag and reader data when snooping (we don't
have the time to do so).
It is identical to the popular 20081211, with the doob addition (20090301), a
linux client, and two additional commands for LF analysis. Let me know if
you find issues here!
