github/proxmark3
1
0
Fork 0
mirror of https://github.com/Proxmark/proxmark3.git synced 2025-07-05 20:51:18 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions

setting svn:eol-style=native on files, part 3

Browse source 
(should be done now, sorry)
This commit is contained in:
bushing 2010-02-22 19:29:05 +00:00
parent a459118217
commit ba06a4b694
19 changed files with 1481 additions and 1480 deletions
Download patch file Download diff file Expand all files Collapse all files

82
fpga/fpga.ucf
View file

@ -1,41 +1,41 @@
# See the schematic for the pin assignment.
NET "adc_d<0>" LOC = "P62" ;
NET "adc_d<1>" LOC = "P60" ;
NET "adc_d<2>" LOC = "P58" ;
NET "adc_d<3>" LOC = "P57" ;
NET "adc_d<4>" LOC = "P56" ;
NET "adc_d<5>" LOC = "P55" ;
NET "adc_d<6>" LOC = "P54" ;
NET "adc_d<7>" LOC = "P53" ;
#NET "cross_hi" LOC = "P88" ;
#NET "miso" LOC = "P40" ;
#PACE: Start of Constraints generated by PACE
#PACE: Start of PACE I/O Pin Assignments
NET "adc_clk" LOC = "P46" ;
NET "adc_noe" LOC = "P47" ;
NET "ck_1356meg" LOC = "P91" ;
NET "ck_1356megb" LOC = "P93" ;
NET "cross_lo" LOC = "P87" ;
NET "dbg" LOC = "P22" ;
NET "mosi" LOC = "P43" ;
NET "ncs" LOC = "P44" ;
NET "pck0" LOC = "P36" ;
NET "pwr_hi" LOC = "P80" ;
NET "pwr_lo" LOC = "P81" ;
NET "pwr_oe1" LOC = "P82" ;
NET "pwr_oe2" LOC = "P83" ;
NET "pwr_oe3" LOC = "P84" ;
NET "pwr_oe4" LOC = "P86" ;
NET "spck" LOC = "P39" ;
NET "ssp_clk" LOC = "P71" ;
NET "ssp_din" LOC = "P32" ;
NET "ssp_dout" LOC = "P34" ;
NET "ssp_frame" LOC = "P31" ;
#PACE: Start of PACE Area Constraints
#PACE: Start of PACE Prohibit Constraints
#PACE: End of Constraints generated by PACE
# See the schematic for the pin assignment.
NET "adc_d<0>" LOC = "P62" ;
NET "adc_d<1>" LOC = "P60" ;
NET "adc_d<2>" LOC = "P58" ;
NET "adc_d<3>" LOC = "P57" ;
NET "adc_d<4>" LOC = "P56" ;
NET "adc_d<5>" LOC = "P55" ;
NET "adc_d<6>" LOC = "P54" ;
NET "adc_d<7>" LOC = "P53" ;
#NET "cross_hi" LOC = "P88" ;
#NET "miso" LOC = "P40" ;
#PACE: Start of Constraints generated by PACE
#PACE: Start of PACE I/O Pin Assignments
NET "adc_clk" LOC = "P46" ;
NET "adc_noe" LOC = "P47" ;
NET "ck_1356meg" LOC = "P91" ;
NET "ck_1356megb" LOC = "P93" ;
NET "cross_lo" LOC = "P87" ;
NET "dbg" LOC = "P22" ;
NET "mosi" LOC = "P43" ;
NET "ncs" LOC = "P44" ;
NET "pck0" LOC = "P36" ;
NET "pwr_hi" LOC = "P80" ;
NET "pwr_lo" LOC = "P81" ;
NET "pwr_oe1" LOC = "P82" ;
NET "pwr_oe2" LOC = "P83" ;
NET "pwr_oe3" LOC = "P84" ;
NET "pwr_oe4" LOC = "P86" ;
NET "spck" LOC = "P39" ;
NET "ssp_clk" LOC = "P71" ;
NET "ssp_din" LOC = "P32" ;
NET "ssp_dout" LOC = "P34" ;
NET "ssp_frame" LOC = "P31" ;
#PACE: Start of PACE Area Constraints
#PACE: Start of PACE Prohibit Constraints
#PACE: End of Constraints generated by PACE

426
fpga/fpga.v
View file

@ -1,213 +1,213 @@
//-----------------------------------------------------------------------------
// The FPGA is responsible for interfacing between the A/D, the coil drivers,
// and the ARM. In the low-frequency modes it passes the data straight
// through, so that the ARM gets raw A/D samples over the SSP. In the high-
// frequency modes, the FPGA might perform some demodulation first, to
// reduce the amount of data that we must send to the ARM.
//
// I am not really an FPGA/ASIC designer, so I am sure that a lot of this
// could be improved.
//
// Jonathan Westhues, March 2006
// Added ISO14443-A support by Gerhard de Koning Gans, April 2008
//-----------------------------------------------------------------------------
`include "lo_read.v"
`include "lo_passthru.v"
`include "lo_simulate.v"
`include "hi_read_tx.v"
`include "hi_read_rx_xcorr.v"
`include "hi_simulate.v"
`include "hi_iso14443a.v"
`include "util.v"
module fpga(
spcki, miso, mosi, ncs,
pck0i, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk, adc_noe,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg
);
input spcki, mosi, ncs;
output miso;
input pck0i, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk, adc_noe;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
//assign pck0 = pck0i;
IBUFG #(.IOSTANDARD("DEFAULT") ) pck0b(
.O(pck0),
.I(pck0i)
);
//assign spck = spcki;
IBUFG #(.IOSTANDARD("DEFAULT") ) spckb(
.O(spck),
.I(spcki)
);
//-----------------------------------------------------------------------------
// The SPI receiver. This sets up the configuration word, which the rest of
// the logic looks at to determine how to connect the A/D and the coil
// drivers (i.e., which section gets it). Also assign some symbolic names
// to the configuration bits, for use below.
//-----------------------------------------------------------------------------
reg [15:0] shift_reg;
reg [7:0] divisor;
reg [7:0] conf_word;
// We switch modes between transmitting to the 13.56 MHz tag and receiving
// from it, which means that we must make sure that we can do so without
// glitching, or else we will glitch the transmitted carrier.
always @(posedge ncs)
begin
case(shift_reg[15:12])
4'b0001: conf_word <= shift_reg[7:0];
4'b0010: divisor <= shift_reg[7:0];
endcase
end
always @(posedge spck)
begin
if(~ncs)
begin
shift_reg[15:1] <= shift_reg[14:0];
shift_reg[0] <= mosi;
end
end
wire [2:0] major_mode;
assign major_mode = conf_word[7:5];
// For the low-frequency configuration:
wire lo_is_125khz;
assign lo_is_125khz = conf_word[3];
// For the high-frequency transmit configuration: modulation depth, either
// 100% (just quite driving antenna, steady LOW), or shallower (tri-state
// some fraction of the buffers)
wire hi_read_tx_shallow_modulation;
assign hi_read_tx_shallow_modulation = conf_word[0];
// For the high-frequency receive correlator: frequency against which to
// correlate.
wire hi_read_rx_xcorr_848;
assign hi_read_rx_xcorr_848 = conf_word[0];
// and whether to drive the coil (reader) or just short it (snooper)
wire hi_read_rx_xcorr_snoop;
assign hi_read_rx_xcorr_snoop = conf_word[1];
// Divide the expected subcarrier frequency for hi_read_rx_xcorr by 4
wire hi_read_rx_xcorr_quarter;
assign hi_read_rx_xcorr_quarter = conf_word[2];
// For the high-frequency simulated tag: what kind of modulation to use.
wire [2:0] hi_simulate_mod_type;
assign hi_simulate_mod_type = conf_word[2:0];
//-----------------------------------------------------------------------------
// And then we instantiate the modules corresponding to each of the FPGA's
// major modes, and use muxes to connect the outputs of the active mode to
// the output pins.
//-----------------------------------------------------------------------------
lo_read lr(
pck0, ck_1356meg, ck_1356megb,
lr_pwr_lo, lr_pwr_hi, lr_pwr_oe1, lr_pwr_oe2, lr_pwr_oe3, lr_pwr_oe4,
adc_d, lr_adc_clk,
lr_ssp_frame, lr_ssp_din, ssp_dout, lr_ssp_clk,
cross_hi, cross_lo,
lr_dbg,
lo_is_125khz, divisor
);
lo_passthru lp(
pck0, ck_1356meg, ck_1356megb,
lp_pwr_lo, lp_pwr_hi, lp_pwr_oe1, lp_pwr_oe2, lp_pwr_oe3, lp_pwr_oe4,
adc_d, lp_adc_clk,
lp_ssp_frame, lp_ssp_din, ssp_dout, lp_ssp_clk,
cross_hi, cross_lo,
lp_dbg, divisor
);
lo_simulate ls(
pck0, ck_1356meg, ck_1356megb,
ls_pwr_lo, ls_pwr_hi, ls_pwr_oe1, ls_pwr_oe2, ls_pwr_oe3, ls_pwr_oe4,
adc_d, ls_adc_clk,
ls_ssp_frame, ls_ssp_din, ssp_dout, ls_ssp_clk,
cross_hi, cross_lo,
ls_dbg, divisor
);
hi_read_tx ht(
pck0, ck_1356meg, ck_1356megb,
ht_pwr_lo, ht_pwr_hi, ht_pwr_oe1, ht_pwr_oe2, ht_pwr_oe3, ht_pwr_oe4,
adc_d, ht_adc_clk,
ht_ssp_frame, ht_ssp_din, ssp_dout, ht_ssp_clk,
cross_hi, cross_lo,
ht_dbg,
hi_read_tx_shallow_modulation
);
hi_read_rx_xcorr hrxc(
pck0, ck_1356meg, ck_1356megb,
hrxc_pwr_lo, hrxc_pwr_hi, hrxc_pwr_oe1, hrxc_pwr_oe2, hrxc_pwr_oe3, hrxc_pwr_oe4,
adc_d, hrxc_adc_clk,
hrxc_ssp_frame, hrxc_ssp_din, ssp_dout, hrxc_ssp_clk,
cross_hi, cross_lo,
hrxc_dbg,
hi_read_rx_xcorr_848, hi_read_rx_xcorr_snoop, hi_read_rx_xcorr_quarter
);
hi_simulate hs(
pck0, ck_1356meg, ck_1356megb,
hs_pwr_lo, hs_pwr_hi, hs_pwr_oe1, hs_pwr_oe2, hs_pwr_oe3, hs_pwr_oe4,
adc_d, hs_adc_clk,
hs_ssp_frame, hs_ssp_din, ssp_dout, hs_ssp_clk,
cross_hi, cross_lo,
hs_dbg,
hi_simulate_mod_type
);
hi_iso14443a hisn(
pck0, ck_1356meg, ck_1356megb,
hisn_pwr_lo, hisn_pwr_hi, hisn_pwr_oe1, hisn_pwr_oe2, hisn_pwr_oe3, hisn_pwr_oe4,
adc_d, hisn_adc_clk,
hisn_ssp_frame, hisn_ssp_din, ssp_dout, hisn_ssp_clk,
cross_hi, cross_lo,
hisn_dbg,
hi_simulate_mod_type
);
// Major modes:
// 000 -- LF reader (generic)
// 001 -- LF simulated tag (generic)
// 010 -- HF reader, transmitting to tag; modulation depth selectable
// 011 -- HF reader, receiving from tag, correlating as it goes; frequency selectable
// 100 -- HF simulated tag
// 101 -- HF ISO14443-A
// 110 -- LF passthrough
// 111 -- everything off
mux8 mux_ssp_clk (major_mode, ssp_clk, lr_ssp_clk, ls_ssp_clk, ht_ssp_clk, hrxc_ssp_clk, hs_ssp_clk, hisn_ssp_clk, lp_ssp_clk, 1'b0);
mux8 mux_ssp_din (major_mode, ssp_din, lr_ssp_din, ls_ssp_din, ht_ssp_din, hrxc_ssp_din, hs_ssp_din, hisn_ssp_din, lp_ssp_din, 1'b0);
mux8 mux_ssp_frame (major_mode, ssp_frame, lr_ssp_frame, ls_ssp_frame, ht_ssp_frame, hrxc_ssp_frame, hs_ssp_frame, hisn_ssp_frame, lp_ssp_frame, 1'b0);
mux8 mux_pwr_oe1 (major_mode, pwr_oe1, lr_pwr_oe1, ls_pwr_oe1, ht_pwr_oe1, hrxc_pwr_oe1, hs_pwr_oe1, hisn_pwr_oe1, lp_pwr_oe1, 1'b0);
mux8 mux_pwr_oe2 (major_mode, pwr_oe2, lr_pwr_oe2, ls_pwr_oe2, ht_pwr_oe2, hrxc_pwr_oe2, hs_pwr_oe2, hisn_pwr_oe2, lp_pwr_oe2, 1'b0);
mux8 mux_pwr_oe3 (major_mode, pwr_oe3, lr_pwr_oe3, ls_pwr_oe3, ht_pwr_oe3, hrxc_pwr_oe3, hs_pwr_oe3, hisn_pwr_oe3, lp_pwr_oe3, 1'b0);
mux8 mux_pwr_oe4 (major_mode, pwr_oe4, lr_pwr_oe4, ls_pwr_oe4, ht_pwr_oe4, hrxc_pwr_oe4, hs_pwr_oe4, hisn_pwr_oe4, lp_pwr_oe4, 1'b0);
mux8 mux_pwr_lo (major_mode, pwr_lo, lr_pwr_lo, ls_pwr_lo, ht_pwr_lo, hrxc_pwr_lo, hs_pwr_lo, hisn_pwr_lo, lp_pwr_lo, 1'b0);
mux8 mux_pwr_hi (major_mode, pwr_hi, lr_pwr_hi, ls_pwr_hi, ht_pwr_hi, hrxc_pwr_hi, hs_pwr_hi, hisn_pwr_hi, lp_pwr_hi, 1'b0);
mux8 mux_adc_clk (major_mode, adc_clk, lr_adc_clk, ls_adc_clk, ht_adc_clk, hrxc_adc_clk, hs_adc_clk, hisn_adc_clk, lp_adc_clk, 1'b0);
mux8 mux_dbg (major_mode, dbg, lr_dbg, ls_dbg, ht_dbg, hrxc_dbg, hs_dbg, hisn_dbg, lp_dbg, 1'b0);
// In all modes, let the ADC's outputs be enabled.
assign adc_noe = 1'b0;
endmodule
//-----------------------------------------------------------------------------
// The FPGA is responsible for interfacing between the A/D, the coil drivers,
// and the ARM. In the low-frequency modes it passes the data straight
// through, so that the ARM gets raw A/D samples over the SSP. In the high-
// frequency modes, the FPGA might perform some demodulation first, to
// reduce the amount of data that we must send to the ARM.
//
// I am not really an FPGA/ASIC designer, so I am sure that a lot of this
// could be improved.
//
// Jonathan Westhues, March 2006
// Added ISO14443-A support by Gerhard de Koning Gans, April 2008
//-----------------------------------------------------------------------------
`include "lo_read.v"
`include "lo_passthru.v"
`include "lo_simulate.v"
`include "hi_read_tx.v"
`include "hi_read_rx_xcorr.v"
`include "hi_simulate.v"
`include "hi_iso14443a.v"
`include "util.v"
module fpga(
spcki, miso, mosi, ncs,
pck0i, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk, adc_noe,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg
);
input spcki, mosi, ncs;
output miso;
input pck0i, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk, adc_noe;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
//assign pck0 = pck0i;
IBUFG #(.IOSTANDARD("DEFAULT") ) pck0b(
.O(pck0),
.I(pck0i)
);
//assign spck = spcki;
IBUFG #(.IOSTANDARD("DEFAULT") ) spckb(
.O(spck),
.I(spcki)
);
//-----------------------------------------------------------------------------
// The SPI receiver. This sets up the configuration word, which the rest of
// the logic looks at to determine how to connect the A/D and the coil
// drivers (i.e., which section gets it). Also assign some symbolic names
// to the configuration bits, for use below.
//-----------------------------------------------------------------------------
reg [15:0] shift_reg;
reg [7:0] divisor;
reg [7:0] conf_word;
// We switch modes between transmitting to the 13.56 MHz tag and receiving
// from it, which means that we must make sure that we can do so without
// glitching, or else we will glitch the transmitted carrier.
always @(posedge ncs)
begin
case(shift_reg[15:12])
4'b0001: conf_word <= shift_reg[7:0];
4'b0010: divisor <= shift_reg[7:0];
endcase
end
always @(posedge spck)
begin
if(~ncs)
begin
shift_reg[15:1] <= shift_reg[14:0];
shift_reg[0] <= mosi;
end
end
wire [2:0] major_mode;
assign major_mode = conf_word[7:5];
// For the low-frequency configuration:
wire lo_is_125khz;
assign lo_is_125khz = conf_word[3];
// For the high-frequency transmit configuration: modulation depth, either
// 100% (just quite driving antenna, steady LOW), or shallower (tri-state
// some fraction of the buffers)
wire hi_read_tx_shallow_modulation;
assign hi_read_tx_shallow_modulation = conf_word[0];
// For the high-frequency receive correlator: frequency against which to
// correlate.
wire hi_read_rx_xcorr_848;
assign hi_read_rx_xcorr_848 = conf_word[0];
// and whether to drive the coil (reader) or just short it (snooper)
wire hi_read_rx_xcorr_snoop;
assign hi_read_rx_xcorr_snoop = conf_word[1];
// Divide the expected subcarrier frequency for hi_read_rx_xcorr by 4
wire hi_read_rx_xcorr_quarter;
assign hi_read_rx_xcorr_quarter = conf_word[2];
// For the high-frequency simulated tag: what kind of modulation to use.
wire [2:0] hi_simulate_mod_type;
assign hi_simulate_mod_type = conf_word[2:0];
//-----------------------------------------------------------------------------
// And then we instantiate the modules corresponding to each of the FPGA's
// major modes, and use muxes to connect the outputs of the active mode to
// the output pins.
//-----------------------------------------------------------------------------
lo_read lr(
pck0, ck_1356meg, ck_1356megb,
lr_pwr_lo, lr_pwr_hi, lr_pwr_oe1, lr_pwr_oe2, lr_pwr_oe3, lr_pwr_oe4,
adc_d, lr_adc_clk,
lr_ssp_frame, lr_ssp_din, ssp_dout, lr_ssp_clk,
cross_hi, cross_lo,
lr_dbg,
lo_is_125khz, divisor
);
lo_passthru lp(
pck0, ck_1356meg, ck_1356megb,
lp_pwr_lo, lp_pwr_hi, lp_pwr_oe1, lp_pwr_oe2, lp_pwr_oe3, lp_pwr_oe4,
adc_d, lp_adc_clk,
lp_ssp_frame, lp_ssp_din, ssp_dout, lp_ssp_clk,
cross_hi, cross_lo,
lp_dbg, divisor
);
lo_simulate ls(
pck0, ck_1356meg, ck_1356megb,
ls_pwr_lo, ls_pwr_hi, ls_pwr_oe1, ls_pwr_oe2, ls_pwr_oe3, ls_pwr_oe4,
adc_d, ls_adc_clk,
ls_ssp_frame, ls_ssp_din, ssp_dout, ls_ssp_clk,
cross_hi, cross_lo,
ls_dbg, divisor
);
hi_read_tx ht(
pck0, ck_1356meg, ck_1356megb,
ht_pwr_lo, ht_pwr_hi, ht_pwr_oe1, ht_pwr_oe2, ht_pwr_oe3, ht_pwr_oe4,
adc_d, ht_adc_clk,
ht_ssp_frame, ht_ssp_din, ssp_dout, ht_ssp_clk,
cross_hi, cross_lo,
ht_dbg,
hi_read_tx_shallow_modulation
);
hi_read_rx_xcorr hrxc(
pck0, ck_1356meg, ck_1356megb,
hrxc_pwr_lo, hrxc_pwr_hi, hrxc_pwr_oe1, hrxc_pwr_oe2, hrxc_pwr_oe3, hrxc_pwr_oe4,
adc_d, hrxc_adc_clk,
hrxc_ssp_frame, hrxc_ssp_din, ssp_dout, hrxc_ssp_clk,
cross_hi, cross_lo,
hrxc_dbg,
hi_read_rx_xcorr_848, hi_read_rx_xcorr_snoop, hi_read_rx_xcorr_quarter
);
hi_simulate hs(
pck0, ck_1356meg, ck_1356megb,
hs_pwr_lo, hs_pwr_hi, hs_pwr_oe1, hs_pwr_oe2, hs_pwr_oe3, hs_pwr_oe4,
adc_d, hs_adc_clk,
hs_ssp_frame, hs_ssp_din, ssp_dout, hs_ssp_clk,
cross_hi, cross_lo,
hs_dbg,
hi_simulate_mod_type
);
hi_iso14443a hisn(
pck0, ck_1356meg, ck_1356megb,
hisn_pwr_lo, hisn_pwr_hi, hisn_pwr_oe1, hisn_pwr_oe2, hisn_pwr_oe3, hisn_pwr_oe4,
adc_d, hisn_adc_clk,
hisn_ssp_frame, hisn_ssp_din, ssp_dout, hisn_ssp_clk,
cross_hi, cross_lo,
hisn_dbg,
hi_simulate_mod_type
);
// Major modes:
// 000 -- LF reader (generic)
// 001 -- LF simulated tag (generic)
// 010 -- HF reader, transmitting to tag; modulation depth selectable
// 011 -- HF reader, receiving from tag, correlating as it goes; frequency selectable
// 100 -- HF simulated tag
// 101 -- HF ISO14443-A
// 110 -- LF passthrough
// 111 -- everything off
mux8 mux_ssp_clk (major_mode, ssp_clk, lr_ssp_clk, ls_ssp_clk, ht_ssp_clk, hrxc_ssp_clk, hs_ssp_clk, hisn_ssp_clk, lp_ssp_clk, 1'b0);
mux8 mux_ssp_din (major_mode, ssp_din, lr_ssp_din, ls_ssp_din, ht_ssp_din, hrxc_ssp_din, hs_ssp_din, hisn_ssp_din, lp_ssp_din, 1'b0);
mux8 mux_ssp_frame (major_mode, ssp_frame, lr_ssp_frame, ls_ssp_frame, ht_ssp_frame, hrxc_ssp_frame, hs_ssp_frame, hisn_ssp_frame, lp_ssp_frame, 1'b0);
mux8 mux_pwr_oe1 (major_mode, pwr_oe1, lr_pwr_oe1, ls_pwr_oe1, ht_pwr_oe1, hrxc_pwr_oe1, hs_pwr_oe1, hisn_pwr_oe1, lp_pwr_oe1, 1'b0);
mux8 mux_pwr_oe2 (major_mode, pwr_oe2, lr_pwr_oe2, ls_pwr_oe2, ht_pwr_oe2, hrxc_pwr_oe2, hs_pwr_oe2, hisn_pwr_oe2, lp_pwr_oe2, 1'b0);
mux8 mux_pwr_oe3 (major_mode, pwr_oe3, lr_pwr_oe3, ls_pwr_oe3, ht_pwr_oe3, hrxc_pwr_oe3, hs_pwr_oe3, hisn_pwr_oe3, lp_pwr_oe3, 1'b0);
mux8 mux_pwr_oe4 (major_mode, pwr_oe4, lr_pwr_oe4, ls_pwr_oe4, ht_pwr_oe4, hrxc_pwr_oe4, hs_pwr_oe4, hisn_pwr_oe4, lp_pwr_oe4, 1'b0);
mux8 mux_pwr_lo (major_mode, pwr_lo, lr_pwr_lo, ls_pwr_lo, ht_pwr_lo, hrxc_pwr_lo, hs_pwr_lo, hisn_pwr_lo, lp_pwr_lo, 1'b0);
mux8 mux_pwr_hi (major_mode, pwr_hi, lr_pwr_hi, ls_pwr_hi, ht_pwr_hi, hrxc_pwr_hi, hs_pwr_hi, hisn_pwr_hi, lp_pwr_hi, 1'b0);
mux8 mux_adc_clk (major_mode, adc_clk, lr_adc_clk, ls_adc_clk, ht_adc_clk, hrxc_adc_clk, hs_adc_clk, hisn_adc_clk, lp_adc_clk, 1'b0);
mux8 mux_dbg (major_mode, dbg, lr_dbg, ls_dbg, ht_dbg, hrxc_dbg, hs_dbg, hisn_dbg, lp_dbg, 1'b0);
// In all modes, let the ADC's outputs be enabled.
assign adc_noe = 1'b0;
endmodule

370
fpga/hi_read_rx_xcorr.v
View file

@ -1,185 +1,185 @@
//-----------------------------------------------------------------------------
//
// Jonathan Westhues, April 2006
//-----------------------------------------------------------------------------
module hi_read_rx_xcorr(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg,
xcorr_is_848, snoop, xcorr_quarter_freq
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
input xcorr_is_848, snoop, xcorr_quarter_freq;
// Carrier is steady on through this, unless we're snooping.
assign pwr_hi = ck_1356megb & (~snoop);
assign pwr_oe1 = 1'b0;
assign pwr_oe2 = 1'b0;
assign pwr_oe3 = 1'b0;
assign pwr_oe4 = 1'b0;
reg ssp_clk;
reg ssp_frame;
reg fc_div_2;
always @(posedge ck_1356meg)
fc_div_2 = ~fc_div_2;
reg fc_div_4;
always @(posedge fc_div_2)
fc_div_4 = ~fc_div_4;
reg fc_div_8;
always @(posedge fc_div_4)
fc_div_8 = ~fc_div_8;
reg adc_clk;
always @(xcorr_is_848 or xcorr_quarter_freq or ck_1356meg)
if(~xcorr_quarter_freq)
begin
if(xcorr_is_848)
// The subcarrier frequency is fc/16; we will sample at fc, so that
// means the subcarrier is 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 ...
adc_clk <= ck_1356meg;
else
// The subcarrier frequency is fc/32; we will sample at fc/2, and
// the subcarrier will look identical.
adc_clk <= fc_div_2;
end
else
begin
if(xcorr_is_848)
// The subcarrier frequency is fc/64
adc_clk <= fc_div_4;
else
// The subcarrier frequency is fc/128
adc_clk <= fc_div_8;
end
// When we're a reader, we just need to do the BPSK demod; but when we're an
// eavesdropper, we also need to pick out the commands sent by the reader,
// using AM. Do this the same way that we do it for the simulated tag.
reg after_hysteresis, after_hysteresis_prev;
reg [11:0] has_been_low_for;
always @(negedge adc_clk)
begin
if(& adc_d[7:0]) after_hysteresis <= 1'b1;
else if(~(| adc_d[7:0])) after_hysteresis <= 1'b0;
if(after_hysteresis)
begin
has_been_low_for <= 7'b0;
end
else
begin
if(has_been_low_for == 12'd4095)
begin
has_been_low_for <= 12'd0;
after_hysteresis <= 1'b1;
end
else
has_been_low_for <= has_been_low_for + 1;
end
end
// Let us report a correlation every 4 subcarrier cycles, or 4*16 samples,
// so we need a 6-bit counter.
reg [5:0] corr_i_cnt;
reg [5:0] corr_q_cnt;
// And a couple of registers in which to accumulate the correlations.
reg signed [15:0] corr_i_accum;
reg signed [15:0] corr_q_accum;
reg signed [7:0] corr_i_out;
reg signed [7:0] corr_q_out;
// ADC data appears on the rising edge, so sample it on the falling edge
always @(negedge adc_clk)
begin
// These are the correlators: we correlate against in-phase and quadrature
// versions of our reference signal, and keep the (signed) result to
// send out later over the SSP.
if(corr_i_cnt == 7'd63)
begin
if(snoop)
begin
corr_i_out <= {corr_i_accum[12:6], after_hysteresis_prev};
corr_q_out <= {corr_q_accum[12:6], after_hysteresis};
end
else
begin
// Only correlations need to be delivered.
corr_i_out <= corr_i_accum[13:6];
corr_q_out <= corr_q_accum[13:6];
end
corr_i_accum <= adc_d;
corr_q_accum <= adc_d;
corr_q_cnt <= 4;
corr_i_cnt <= 0;
end
else
begin
if(corr_i_cnt[3])
corr_i_accum <= corr_i_accum - adc_d;
else
corr_i_accum <= corr_i_accum + adc_d;
if(corr_q_cnt[3])
corr_q_accum <= corr_q_accum - adc_d;
else
corr_q_accum <= corr_q_accum + adc_d;
corr_i_cnt <= corr_i_cnt + 1;
corr_q_cnt <= corr_q_cnt + 1;
end
// The logic in hi_simulate.v reports 4 samples per bit. We report two
// (I, Q) pairs per bit, so we should do 2 samples per pair.
if(corr_i_cnt == 6'd31)
after_hysteresis_prev <= after_hysteresis;
// Then the result from last time is serialized and send out to the ARM.
// We get one report each cycle, and each report is 16 bits, so the
// ssp_clk should be the adc_clk divided by 64/16 = 4.
if(corr_i_cnt[1:0] == 2'b10)
ssp_clk <= 1'b0;
if(corr_i_cnt[1:0] == 2'b00)
begin
ssp_clk <= 1'b1;
// Don't shift if we just loaded new data, obviously.
if(corr_i_cnt != 7'd0)
begin
corr_i_out[7:0] <= {corr_i_out[6:0], corr_q_out[7]};
corr_q_out[7:1] <= corr_q_out[6:0];
end
end
if(corr_i_cnt[5:2] == 4'b000 || corr_i_cnt[5:2] == 4'b1000)
ssp_frame = 1'b1;
else
ssp_frame = 1'b0;
end
assign ssp_din = corr_i_out[7];
assign dbg = corr_i_cnt[3];
// Unused.
assign pwr_lo = 1'b0;
endmodule
//-----------------------------------------------------------------------------
//
// Jonathan Westhues, April 2006
//-----------------------------------------------------------------------------
module hi_read_rx_xcorr(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg,
xcorr_is_848, snoop, xcorr_quarter_freq
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
input xcorr_is_848, snoop, xcorr_quarter_freq;
// Carrier is steady on through this, unless we're snooping.
assign pwr_hi = ck_1356megb & (~snoop);
assign pwr_oe1 = 1'b0;
assign pwr_oe2 = 1'b0;
assign pwr_oe3 = 1'b0;
assign pwr_oe4 = 1'b0;
reg ssp_clk;
reg ssp_frame;
reg fc_div_2;
always @(posedge ck_1356meg)
fc_div_2 = ~fc_div_2;
reg fc_div_4;
always @(posedge fc_div_2)
fc_div_4 = ~fc_div_4;
reg fc_div_8;
always @(posedge fc_div_4)
fc_div_8 = ~fc_div_8;
reg adc_clk;
always @(xcorr_is_848 or xcorr_quarter_freq or ck_1356meg)
if(~xcorr_quarter_freq)
begin
if(xcorr_is_848)
// The subcarrier frequency is fc/16; we will sample at fc, so that
// means the subcarrier is 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 ...
adc_clk <= ck_1356meg;
else
// The subcarrier frequency is fc/32; we will sample at fc/2, and
// the subcarrier will look identical.
adc_clk <= fc_div_2;
end
else
begin
if(xcorr_is_848)
// The subcarrier frequency is fc/64
adc_clk <= fc_div_4;
else
// The subcarrier frequency is fc/128
adc_clk <= fc_div_8;
end
// When we're a reader, we just need to do the BPSK demod; but when we're an
// eavesdropper, we also need to pick out the commands sent by the reader,
// using AM. Do this the same way that we do it for the simulated tag.
reg after_hysteresis, after_hysteresis_prev;
reg [11:0] has_been_low_for;
always @(negedge adc_clk)
begin
if(& adc_d[7:0]) after_hysteresis <= 1'b1;
else if(~(| adc_d[7:0])) after_hysteresis <= 1'b0;
if(after_hysteresis)
begin
has_been_low_for <= 7'b0;
end
else
begin
if(has_been_low_for == 12'd4095)
begin
has_been_low_for <= 12'd0;
after_hysteresis <= 1'b1;
end
else
has_been_low_for <= has_been_low_for + 1;
end
end
// Let us report a correlation every 4 subcarrier cycles, or 4*16 samples,
// so we need a 6-bit counter.
reg [5:0] corr_i_cnt;
reg [5:0] corr_q_cnt;
// And a couple of registers in which to accumulate the correlations.
reg signed [15:0] corr_i_accum;
reg signed [15:0] corr_q_accum;
reg signed [7:0] corr_i_out;
reg signed [7:0] corr_q_out;
// ADC data appears on the rising edge, so sample it on the falling edge
always @(negedge adc_clk)
begin
// These are the correlators: we correlate against in-phase and quadrature
// versions of our reference signal, and keep the (signed) result to
// send out later over the SSP.
if(corr_i_cnt == 7'd63)
begin
if(snoop)
begin
corr_i_out <= {corr_i_accum[12:6], after_hysteresis_prev};
corr_q_out <= {corr_q_accum[12:6], after_hysteresis};
end
else
begin
// Only correlations need to be delivered.
corr_i_out <= corr_i_accum[13:6];
corr_q_out <= corr_q_accum[13:6];
end
corr_i_accum <= adc_d;
corr_q_accum <= adc_d;
corr_q_cnt <= 4;
corr_i_cnt <= 0;
end
else
begin
if(corr_i_cnt[3])
corr_i_accum <= corr_i_accum - adc_d;
else
corr_i_accum <= corr_i_accum + adc_d;
if(corr_q_cnt[3])
corr_q_accum <= corr_q_accum - adc_d;
else
corr_q_accum <= corr_q_accum + adc_d;
corr_i_cnt <= corr_i_cnt + 1;
corr_q_cnt <= corr_q_cnt + 1;
end
// The logic in hi_simulate.v reports 4 samples per bit. We report two
// (I, Q) pairs per bit, so we should do 2 samples per pair.
if(corr_i_cnt == 6'd31)
after_hysteresis_prev <= after_hysteresis;
// Then the result from last time is serialized and send out to the ARM.
// We get one report each cycle, and each report is 16 bits, so the
// ssp_clk should be the adc_clk divided by 64/16 = 4.
if(corr_i_cnt[1:0] == 2'b10)
ssp_clk <= 1'b0;
if(corr_i_cnt[1:0] == 2'b00)
begin
ssp_clk <= 1'b1;
// Don't shift if we just loaded new data, obviously.
if(corr_i_cnt != 7'd0)
begin
corr_i_out[7:0] <= {corr_i_out[6:0], corr_q_out[7]};
corr_q_out[7:1] <= corr_q_out[6:0];
end
end
if(corr_i_cnt[5:2] == 4'b000 || corr_i_cnt[5:2] == 4'b1000)
ssp_frame = 1'b1;
else
ssp_frame = 1'b0;
end
assign ssp_din = corr_i_out[7];
assign dbg = corr_i_cnt[3];
// Unused.
assign pwr_lo = 1'b0;
endmodule

178
fpga/hi_read_tx.v
View file

@ -1,89 +1,89 @@
//-----------------------------------------------------------------------------
// The way that we connect things when transmitting a command to an ISO
// 15693 tag, using 100% modulation only for now.
//
// Jonathan Westhues, April 2006
//-----------------------------------------------------------------------------
module hi_read_tx(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg,
shallow_modulation
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
input shallow_modulation;
// The high-frequency stuff. For now, for testing, just bring out the carrier,
// and allow the ARM to modulate it over the SSP.
reg pwr_hi;
reg pwr_oe1;
reg pwr_oe2;
reg pwr_oe3;
reg pwr_oe4;
always @(ck_1356megb or ssp_dout or shallow_modulation)
begin
if(shallow_modulation)
begin
pwr_hi <= ck_1356megb;
pwr_oe1 <= ~ssp_dout;
pwr_oe2 <= ~ssp_dout;
pwr_oe3 <= ~ssp_dout;
pwr_oe4 <= 1'b0;
end
else
begin
pwr_hi <= ck_1356megb & ssp_dout;
pwr_oe1 <= 1'b0;
pwr_oe2 <= 1'b0;
pwr_oe3 <= 1'b0;
pwr_oe4 <= 1'b0;
end
end
// Then just divide the 13.56 MHz clock down to produce appropriate clocks
// for the synchronous serial port.
reg [6:0] hi_div_by_128;
always @(posedge ck_1356meg)
hi_div_by_128 <= hi_div_by_128 + 1;
assign ssp_clk = hi_div_by_128[6];
reg [2:0] hi_byte_div;
always @(negedge ssp_clk)
hi_byte_div <= hi_byte_div + 1;
assign ssp_frame = (hi_byte_div == 3'b000);
// Implement a hysteresis to give out the received signal on
// ssp_din. Sample at fc.
assign adc_clk = ck_1356meg;
// ADC data appears on the rising edge, so sample it on the falling edge
reg after_hysteresis;
always @(negedge adc_clk)
begin
if(& adc_d[7:0]) after_hysteresis <= 1'b1;
else if(~(| adc_d[7:0])) after_hysteresis <= 1'b0;
end
assign ssp_din = after_hysteresis;
assign pwr_lo = 1'b0;
assign dbg = ssp_din;
endmodule
//-----------------------------------------------------------------------------
// The way that we connect things when transmitting a command to an ISO
// 15693 tag, using 100% modulation only for now.
//
// Jonathan Westhues, April 2006
//-----------------------------------------------------------------------------
module hi_read_tx(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg,
shallow_modulation
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
input shallow_modulation;
// The high-frequency stuff. For now, for testing, just bring out the carrier,
// and allow the ARM to modulate it over the SSP.
reg pwr_hi;
reg pwr_oe1;
reg pwr_oe2;
reg pwr_oe3;
reg pwr_oe4;
always @(ck_1356megb or ssp_dout or shallow_modulation)
begin
if(shallow_modulation)
begin
pwr_hi <= ck_1356megb;
pwr_oe1 <= ~ssp_dout;
pwr_oe2 <= ~ssp_dout;
pwr_oe3 <= ~ssp_dout;
pwr_oe4 <= 1'b0;
end
else
begin
pwr_hi <= ck_1356megb & ssp_dout;
pwr_oe1 <= 1'b0;
pwr_oe2 <= 1'b0;
pwr_oe3 <= 1'b0;
pwr_oe4 <= 1'b0;
end
end
// Then just divide the 13.56 MHz clock down to produce appropriate clocks
// for the synchronous serial port.
reg [6:0] hi_div_by_128;
always @(posedge ck_1356meg)
hi_div_by_128 <= hi_div_by_128 + 1;
assign ssp_clk = hi_div_by_128[6];
reg [2:0] hi_byte_div;
always @(negedge ssp_clk)
hi_byte_div <= hi_byte_div + 1;
assign ssp_frame = (hi_byte_div == 3'b000);
// Implement a hysteresis to give out the received signal on
// ssp_din. Sample at fc.
assign adc_clk = ck_1356meg;
// ADC data appears on the rising edge, so sample it on the falling edge
reg after_hysteresis;
always @(negedge adc_clk)
begin
if(& adc_d[7:0]) after_hysteresis <= 1'b1;
else if(~(| adc_d[7:0])) after_hysteresis <= 1'b0;
end
assign ssp_din = after_hysteresis;
assign pwr_lo = 1'b0;
assign dbg = ssp_din;
endmodule

218
fpga/hi_simulate.v
View file

@ -1,109 +1,109 @@
//-----------------------------------------------------------------------------
// Pretend to be an ISO 14443 tag. We will do this by alternately short-
// circuiting and open-circuiting the antenna coil, with the tri-state
// pins.
//
// We communicate over the SSP, as a bitstream (i.e., might as well be
// unframed, though we still generate the word sync signal). The output
// (ARM -> FPGA) tells us whether to modulate or not. The input (FPGA
// -> ARM) is us using the A/D as a fancy comparator; this is with
// (software-added) hysteresis, to undo the high-pass filter.
//
// At this point only Type A is implemented. This means that we are using a
// bit rate of 106 kbit/s, or fc/128. Oversample by 4, which ought to make
// things practical for the ARM (fc/32, 423.8 kbits/s, ~50 kbytes/s)
//
// Jonathan Westhues, October 2006
//-----------------------------------------------------------------------------
module hi_simulate(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg,
mod_type
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
input [2:0] mod_type;
// Power amp goes between LOW and tri-state, so pwr_hi (and pwr_lo) can
// always be low.
assign pwr_hi = 1'b0;
assign pwr_lo = 1'b0;
// The comparator with hysteresis on the output from the peak detector.
reg after_hysteresis;
assign adc_clk = ck_1356meg;
always @(negedge adc_clk)
begin
if(& adc_d[7:5]) after_hysteresis = 1'b1;
else if(~(| adc_d[7:5])) after_hysteresis = 1'b0;
end
// Divide 13.56 MHz by 32 to produce the SSP_CLK
// The register is bigger to allow higher division factors of up to /128
reg [6:0] ssp_clk_divider;
always @(posedge adc_clk)
ssp_clk_divider <= (ssp_clk_divider + 1);
assign ssp_clk = ssp_clk_divider[4];
// Divide SSP_CLK by 8 to produce the byte framing signal; the phase of
// this is arbitrary, because it's just a bitstream.
// One nasty issue, though: I can't make it work with both rx and tx at
// once. The phase wrt ssp_clk must be changed. TODO to find out why
// that is and make a better fix.
reg [2:0] ssp_frame_divider_to_arm;
always @(posedge ssp_clk)
ssp_frame_divider_to_arm <= (ssp_frame_divider_to_arm + 1);
reg [2:0] ssp_frame_divider_from_arm;
always @(negedge ssp_clk)
ssp_frame_divider_from_arm <= (ssp_frame_divider_from_arm + 1);
reg ssp_frame;
always @(ssp_frame_divider_to_arm or ssp_frame_divider_from_arm or mod_type)
if(mod_type == 3'b000) // not modulating, so listening, to ARM
ssp_frame = (ssp_frame_divider_to_arm == 3'b000);
else
ssp_frame = (ssp_frame_divider_from_arm == 3'b000);
// Synchronize up the after-hysteresis signal, to produce DIN.
reg ssp_din;
always @(posedge ssp_clk)
ssp_din = after_hysteresis;
// Modulating carrier frequency is fc/16, reuse ssp_clk divider for that
reg modulating_carrier;
always @(mod_type or ssp_clk or ssp_dout)
if(mod_type == 3'b000)
modulating_carrier <= 1'b0; // no modulation
else if(mod_type == 3'b001)
modulating_carrier <= ssp_dout ^ ssp_clk_divider[3]; // XOR means BPSK
else if(mod_type == 3'b010)
modulating_carrier <= ssp_dout & ssp_clk_divider[5]; // switch 212kHz subcarrier on/off
else
modulating_carrier <= 1'b0; // yet unused
// This one is all LF, so doesn't matter
assign pwr_oe2 = modulating_carrier;
// Toggle only one of these, since we are already producing much deeper
// modulation than a real tag would.
assign pwr_oe1 = modulating_carrier;
assign pwr_oe4 = modulating_carrier;
// This one is always on, so that we can watch the carrier.
assign pwr_oe3 = 1'b0;
assign dbg = after_hysteresis;
endmodule
//-----------------------------------------------------------------------------
// Pretend to be an ISO 14443 tag. We will do this by alternately short-
// circuiting and open-circuiting the antenna coil, with the tri-state
// pins.
//
// We communicate over the SSP, as a bitstream (i.e., might as well be
// unframed, though we still generate the word sync signal). The output
// (ARM -> FPGA) tells us whether to modulate or not. The input (FPGA
// -> ARM) is us using the A/D as a fancy comparator; this is with
// (software-added) hysteresis, to undo the high-pass filter.
//
// At this point only Type A is implemented. This means that we are using a
// bit rate of 106 kbit/s, or fc/128. Oversample by 4, which ought to make
// things practical for the ARM (fc/32, 423.8 kbits/s, ~50 kbytes/s)
//
// Jonathan Westhues, October 2006
//-----------------------------------------------------------------------------
module hi_simulate(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg,
mod_type
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
input [2:0] mod_type;
// Power amp goes between LOW and tri-state, so pwr_hi (and pwr_lo) can
// always be low.
assign pwr_hi = 1'b0;
assign pwr_lo = 1'b0;
// The comparator with hysteresis on the output from the peak detector.
reg after_hysteresis;
assign adc_clk = ck_1356meg;
always @(negedge adc_clk)
begin
if(& adc_d[7:5]) after_hysteresis = 1'b1;
else if(~(| adc_d[7:5])) after_hysteresis = 1'b0;
end
// Divide 13.56 MHz by 32 to produce the SSP_CLK
// The register is bigger to allow higher division factors of up to /128
reg [6:0] ssp_clk_divider;
always @(posedge adc_clk)
ssp_clk_divider <= (ssp_clk_divider + 1);
assign ssp_clk = ssp_clk_divider[4];
// Divide SSP_CLK by 8 to produce the byte framing signal; the phase of
// this is arbitrary, because it's just a bitstream.
// One nasty issue, though: I can't make it work with both rx and tx at
// once. The phase wrt ssp_clk must be changed. TODO to find out why
// that is and make a better fix.
reg [2:0] ssp_frame_divider_to_arm;
always @(posedge ssp_clk)
ssp_frame_divider_to_arm <= (ssp_frame_divider_to_arm + 1);
reg [2:0] ssp_frame_divider_from_arm;
always @(negedge ssp_clk)
ssp_frame_divider_from_arm <= (ssp_frame_divider_from_arm + 1);
reg ssp_frame;
always @(ssp_frame_divider_to_arm or ssp_frame_divider_from_arm or mod_type)
if(mod_type == 3'b000) // not modulating, so listening, to ARM
ssp_frame = (ssp_frame_divider_to_arm == 3'b000);
else
ssp_frame = (ssp_frame_divider_from_arm == 3'b000);
// Synchronize up the after-hysteresis signal, to produce DIN.
reg ssp_din;
always @(posedge ssp_clk)
ssp_din = after_hysteresis;
// Modulating carrier frequency is fc/16, reuse ssp_clk divider for that
reg modulating_carrier;
always @(mod_type or ssp_clk or ssp_dout)
if(mod_type == 3'b000)
modulating_carrier <= 1'b0; // no modulation
else if(mod_type == 3'b001)
modulating_carrier <= ssp_dout ^ ssp_clk_divider[3]; // XOR means BPSK
else if(mod_type == 3'b010)
modulating_carrier <= ssp_dout & ssp_clk_divider[5]; // switch 212kHz subcarrier on/off
else
modulating_carrier <= 1'b0; // yet unused
// This one is all LF, so doesn't matter
assign pwr_oe2 = modulating_carrier;
// Toggle only one of these, since we are already producing much deeper
// modulation than a real tag would.
assign pwr_oe1 = modulating_carrier;
assign pwr_oe4 = modulating_carrier;
// This one is always on, so that we can watch the carrier.
assign pwr_oe3 = 1'b0;
assign dbg = after_hysteresis;
endmodule

112
fpga/lo_passthru.v
View file

@ -1,56 +1,56 @@
//-----------------------------------------------------------------------------
// For reading TI tags, we need to place the FPGA in pass through mode
// and pass everything through to the ARM
//-----------------------------------------------------------------------------
module lo_passthru(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg, divisor
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
input [7:0] divisor;
reg [7:0] pck_divider;
reg ant_lo;
// this task runs on the rising egde of pck0 clock (24Mhz) and creates ant_lo
// which is high for (divisor+1) pck0 cycles and low for the same duration
// ant_lo is therefore a 50% duty cycle clock signal with a frequency of
// 12Mhz/(divisor+1) which drives the antenna as well as the ADC clock adc_clk
always @(posedge pck0)
begin
if(pck_divider == divisor[7:0])
begin
pck_divider <= 8'd0;
ant_lo = !ant_lo;
end
else
begin
pck_divider <= pck_divider + 1;
end
end
// the antenna is modulated when ssp_dout = 1, when 0 the
// antenna drivers stop modulating and go into listen mode
assign pwr_oe3 = 1'b0;
assign pwr_oe1 = ssp_dout;
assign pwr_oe2 = ssp_dout;
assign pwr_oe4 = ssp_dout;
assign pwr_lo = ant_lo && ssp_dout;
assign pwr_hi = 1'b0;
assign adc_clk = 1'b0;
assign ssp_din = cross_lo;
assign dbg = cross_lo;
endmodule
//-----------------------------------------------------------------------------
// For reading TI tags, we need to place the FPGA in pass through mode
// and pass everything through to the ARM
//-----------------------------------------------------------------------------
module lo_passthru(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg, divisor
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
input [7:0] divisor;
reg [7:0] pck_divider;
reg ant_lo;
// this task runs on the rising egde of pck0 clock (24Mhz) and creates ant_lo
// which is high for (divisor+1) pck0 cycles and low for the same duration
// ant_lo is therefore a 50% duty cycle clock signal with a frequency of
// 12Mhz/(divisor+1) which drives the antenna as well as the ADC clock adc_clk
always @(posedge pck0)
begin
if(pck_divider == divisor[7:0])
begin
pck_divider <= 8'd0;
ant_lo = !ant_lo;
end
else
begin
pck_divider <= pck_divider + 1;
end
end
// the antenna is modulated when ssp_dout = 1, when 0 the
// antenna drivers stop modulating and go into listen mode
assign pwr_oe3 = 1'b0;
assign pwr_oe1 = ssp_dout;
assign pwr_oe2 = ssp_dout;
assign pwr_oe4 = ssp_dout;
assign pwr_lo = ant_lo && ssp_dout;
assign pwr_hi = 1'b0;
assign adc_clk = 1'b0;
assign ssp_din = cross_lo;
assign dbg = cross_lo;
endmodule

206
fpga/lo_read.v
View file

@ -1,103 +1,103 @@
//-----------------------------------------------------------------------------
// The way that we connect things in low-frequency read mode. In this case
// we are generating the unmodulated low frequency carrier.
// The A/D samples at that same rate and the result is serialized.
//
// Jonathan Westhues, April 2006
//-----------------------------------------------------------------------------
module lo_read(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg,
lo_is_125khz, divisor
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
input lo_is_125khz; // redundant signal, no longer used anywhere
input [7:0] divisor;
reg [7:0] to_arm_shiftreg;
reg [7:0] pck_divider;
reg ant_lo;
// this task runs on the rising egde of pck0 clock (24Mhz) and creates ant_lo
// which is high for (divisor+1) pck0 cycles and low for the same duration
// ant_lo is therefore a 50% duty cycle clock signal with a frequency of
// 12Mhz/(divisor+1) which drives the antenna as well as the ADC clock adc_clk
always @(posedge pck0)
begin
if(pck_divider == divisor[7:0])
begin
pck_divider <= 8'd0;
ant_lo = !ant_lo;
end
else
begin
pck_divider <= pck_divider + 1;
end
end
// this task also runs at pck0 frequency (24Mhz) and is used to serialize
// the ADC output which is then clocked into the ARM SSP.
// because ant_lo always transitions when pck_divider = 0 we use the
// pck_divider counter to sync our other signals off it
// we read the ADC value when pck_divider=7 and shift it out on counts 8..15
always @(posedge pck0)
begin
if((pck_divider == 8'd7) && !ant_lo)
to_arm_shiftreg <= adc_d;
else
begin
to_arm_shiftreg[7:1] <= to_arm_shiftreg[6:0];
// simulation showed a glitch occuring due to the LSB of the shifter
// not being set as we shift bits out
// this ensures the ssp_din remains low after a transfer and suppresses
// the glitch that would occur when the last data shifted out ended in
// a 1 bit and the next data shifted out started with a 0 bit
to_arm_shiftreg[0] <= 1'b0;
end
end
// ADC samples on falling edge of adc_clk, data available on the rising edge
// example of ssp transfer of binary value 1100101
// start of transfer is indicated by the rise of the ssp_frame signal
// ssp_din changes on the rising edge of the ssp_clk clock and is clocked into
// the ARM by the falling edge of ssp_clk
// _______________________________
// ssp_frame__| |__
// _______ ___ ___
// ssp_din __| |_______| |___| |______
// _ _ _ _ _ _ _ _ _ _
// ssp_clk |_| |_| |_| |_| |_| |_| |_| |_| |_| |_
// serialized SSP data is gated by ant_lo to suppress unwanted signal
assign ssp_din = to_arm_shiftreg[7] && !ant_lo;
// SSP clock always runs at 24Mhz
assign ssp_clk = pck0;
// SSP frame is gated by ant_lo and goes high when pck_divider=8..15
assign ssp_frame = (pck_divider[7:3] == 5'd1) && !ant_lo;
// unused signals tied low
assign pwr_hi = 1'b0;
assign pwr_oe1 = 1'b0;
assign pwr_oe2 = 1'b0;
assign pwr_oe3 = 1'b0;
assign pwr_oe4 = 1'b0;
// this is the antenna driver signal
assign pwr_lo = ant_lo;
// ADC clock out of phase with antenna driver
assign adc_clk = ~ant_lo;
// ADC clock also routed to debug pin
assign dbg = adc_clk;
endmodule
//-----------------------------------------------------------------------------
// The way that we connect things in low-frequency read mode. In this case
// we are generating the unmodulated low frequency carrier.
// The A/D samples at that same rate and the result is serialized.
//
// Jonathan Westhues, April 2006
//-----------------------------------------------------------------------------
module lo_read(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg,
lo_is_125khz, divisor
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
input lo_is_125khz; // redundant signal, no longer used anywhere
input [7:0] divisor;
reg [7:0] to_arm_shiftreg;
reg [7:0] pck_divider;
reg ant_lo;
// this task runs on the rising egde of pck0 clock (24Mhz) and creates ant_lo
// which is high for (divisor+1) pck0 cycles and low for the same duration
// ant_lo is therefore a 50% duty cycle clock signal with a frequency of
// 12Mhz/(divisor+1) which drives the antenna as well as the ADC clock adc_clk
always @(posedge pck0)
begin
if(pck_divider == divisor[7:0])
begin
pck_divider <= 8'd0;
ant_lo = !ant_lo;
end
else
begin
pck_divider <= pck_divider + 1;
end
end
// this task also runs at pck0 frequency (24Mhz) and is used to serialize
// the ADC output which is then clocked into the ARM SSP.
// because ant_lo always transitions when pck_divider = 0 we use the
// pck_divider counter to sync our other signals off it
// we read the ADC value when pck_divider=7 and shift it out on counts 8..15
always @(posedge pck0)
begin
if((pck_divider == 8'd7) && !ant_lo)
to_arm_shiftreg <= adc_d;
else
begin
to_arm_shiftreg[7:1] <= to_arm_shiftreg[6:0];
// simulation showed a glitch occuring due to the LSB of the shifter
// not being set as we shift bits out
// this ensures the ssp_din remains low after a transfer and suppresses
// the glitch that would occur when the last data shifted out ended in
// a 1 bit and the next data shifted out started with a 0 bit
to_arm_shiftreg[0] <= 1'b0;
end
end
// ADC samples on falling edge of adc_clk, data available on the rising edge
// example of ssp transfer of binary value 1100101
// start of transfer is indicated by the rise of the ssp_frame signal
// ssp_din changes on the rising edge of the ssp_clk clock and is clocked into
// the ARM by the falling edge of ssp_clk
// _______________________________
// ssp_frame__| |__
// _______ ___ ___
// ssp_din __| |_______| |___| |______
// _ _ _ _ _ _ _ _ _ _
// ssp_clk |_| |_| |_| |_| |_| |_| |_| |_| |_| |_
// serialized SSP data is gated by ant_lo to suppress unwanted signal
assign ssp_din = to_arm_shiftreg[7] && !ant_lo;
// SSP clock always runs at 24Mhz
assign ssp_clk = pck0;
// SSP frame is gated by ant_lo and goes high when pck_divider=8..15
assign ssp_frame = (pck_divider[7:3] == 5'd1) && !ant_lo;
// unused signals tied low
assign pwr_hi = 1'b0;
assign pwr_oe1 = 1'b0;
assign pwr_oe2 = 1'b0;
assign pwr_oe3 = 1'b0;
assign pwr_oe4 = 1'b0;
// this is the antenna driver signal
assign pwr_lo = ant_lo;
// ADC clock out of phase with antenna driver
assign adc_clk = ~ant_lo;
// ADC clock also routed to debug pin
assign dbg = adc_clk;
endmodule

101
fpga/lo_simulate.v
View file

@ -1,56 +1,56 @@
//-----------------------------------------------------------------------------
// The way that we connect things in low-frequency simulation mode. In this
// case just pass everything through to the ARM, which can bit-bang this
// (because it is so slow).
//
// Jonathan Westhues, April 2006
//-----------------------------------------------------------------------------
module lo_simulate(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
//-----------------------------------------------------------------------------
// The way that we connect things in low-frequency simulation mode. In this
// case just pass everything through to the ARM, which can bit-bang this
// (because it is so slow).
//
// Jonathan Westhues, April 2006
//-----------------------------------------------------------------------------
module lo_simulate(
pck0, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk,
ssp_frame, ssp_din, ssp_dout, ssp_clk,
cross_hi, cross_lo,
dbg,
divisor
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
divisor
);
input pck0, ck_1356meg, ck_1356megb;
output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
input [7:0] adc_d;
output adc_clk;
input ssp_dout;
output ssp_frame, ssp_din, ssp_clk;
input cross_hi, cross_lo;
output dbg;
input [7:0] divisor;
// No logic, straight through.
assign pwr_oe3 = 1'b0;
assign pwr_oe1 = ssp_dout;
assign pwr_oe2 = ssp_dout;
assign pwr_oe4 = ssp_dout;
assign ssp_clk = cross_lo;
assign pwr_lo = 1'b0;
assign pwr_hi = 1'b0;
assign dbg = ssp_frame;
input [7:0] divisor;
// No logic, straight through.
assign pwr_oe3 = 1'b0;
assign pwr_oe1 = ssp_dout;
assign pwr_oe2 = ssp_dout;
assign pwr_oe4 = ssp_dout;
assign ssp_clk = cross_lo;
assign pwr_lo = 1'b0;
assign pwr_hi = 1'b0;
assign dbg = ssp_frame;
// Divide the clock to be used for the ADC
reg [7:0] pck_divider;
reg clk_state;
always @(posedge pck0)
begin
if(pck_divider == divisor[7:0])
begin
always @(posedge pck0)
begin
if(pck_divider == divisor[7:0])
begin
pck_divider <= 8'd0;
clk_state = !clk_state;
end
else
begin
pck_divider <= pck_divider + 1;
end
end
clk_state = !clk_state;
end
else
begin
pck_divider <= pck_divider + 1;
end
end
assign adc_clk = ~clk_state;
@ -61,8 +61,8 @@ reg is_high;
reg is_low;
reg output_state;
always @(posedge pck0)
begin
always @(posedge pck0)
begin
if((pck_divider == 8'd7) && !clk_state) begin
is_high = (adc_d >= 8'd200);
is_low = (adc_d <= 8'd64);
@ -78,5 +78,6 @@ begin
end
assign ssp_frame = output_state;
endmodule
endmodule

54
fpga/sim.tcl
View file

@ -1,27 +1,27 @@
#------------------------------------------------------------------------------
# Run the simulation testbench in ModelSim: recompile both Verilog source
# files, then start the simulation, add a lot of signals to the waveform
# viewer, and run. I should (TODO) fix the absolute paths at some point.
#
# Jonathan Westhues, Mar 2006
#------------------------------------------------------------------------------
vlog -work work -O0 C:/depot/proximity/mark3/fpga/fpga.v
vlog -work work -O0 C:/depot/proximity/mark3/fpga/fpga_tb.v
vsim work.fpga_tb
add wave sim:/fpga_tb/adc_clk
add wave sim:/fpga_tb/adc_d
add wave sim:/fpga_tb/pwr_lo
add wave sim:/fpga_tb/ssp_clk
add wave sim:/fpga_tb/ssp_frame
add wave sim:/fpga_tb/ssp_din
add wave sim:/fpga_tb/ssp_dout
add wave sim:/fpga_tb/dut/clk_lo
add wave sim:/fpga_tb/dut/pck_divider
add wave sim:/fpga_tb/dut/carrier_divider_lo
add wave sim:/fpga_tb/dut/conf_word
run 30000
#------------------------------------------------------------------------------
# Run the simulation testbench in ModelSim: recompile both Verilog source
# files, then start the simulation, add a lot of signals to the waveform
# viewer, and run. I should (TODO) fix the absolute paths at some point.
#
# Jonathan Westhues, Mar 2006
#------------------------------------------------------------------------------
vlog -work work -O0 C:/depot/proximity/mark3/fpga/fpga.v
vlog -work work -O0 C:/depot/proximity/mark3/fpga/fpga_tb.v
vsim work.fpga_tb
add wave sim:/fpga_tb/adc_clk
add wave sim:/fpga_tb/adc_d
add wave sim:/fpga_tb/pwr_lo
add wave sim:/fpga_tb/ssp_clk
add wave sim:/fpga_tb/ssp_frame
add wave sim:/fpga_tb/ssp_din
add wave sim:/fpga_tb/ssp_dout
add wave sim:/fpga_tb/dut/clk_lo
add wave sim:/fpga_tb/dut/pck_divider
add wave sim:/fpga_tb/dut/carrier_divider_lo
add wave sim:/fpga_tb/dut/conf_word
run 30000

100
fpga/testbed_fpga.v
View file

@ -1,50 +1,50 @@
`include "fpga.v"
module testbed_fpga;
reg spck, mosi, ncs;
wire miso;
reg pck0i, ck_1356meg, ck_1356megb;
wire pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
reg [7:0] adc_d;
wire adc_clk, adc_noe;
reg ssp_dout;
wire ssp_frame, ssp_din, ssp_clk;
fpga dut(
spck, miso, mosi, ncs,
pck0i, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk, adc_noe,
ssp_frame, ssp_din, ssp_dout, ssp_clk
);
integer i;
initial begin
// init inputs
#5 ncs=1;
#5 spck = 1;
#5 mosi = 1;
#50 ncs=0;
for (i = 0 ; i < 8 ; i = i + 1) begin
#5 mosi = $random;
#5 spck = 0;
#5 spck = 1;
end
#5 ncs=1;
#50 ncs=0;
for (i = 0 ; i < 8 ; i = i + 1) begin
#5 mosi = $random;
#5 spck = 0;
#5 spck = 1;
end
#5 ncs=1;
#50 mosi=1;
$finish;
end
endmodule // main
`include "fpga.v"
module testbed_fpga;
reg spck, mosi, ncs;
wire miso;
reg pck0i, ck_1356meg, ck_1356megb;
wire pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
reg [7:0] adc_d;
wire adc_clk, adc_noe;
reg ssp_dout;
wire ssp_frame, ssp_din, ssp_clk;
fpga dut(
spck, miso, mosi, ncs,
pck0i, ck_1356meg, ck_1356megb,
pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4,
adc_d, adc_clk, adc_noe,
ssp_frame, ssp_din, ssp_dout, ssp_clk
);
integer i;
initial begin
// init inputs
#5 ncs=1;
#5 spck = 1;
#5 mosi = 1;
#50 ncs=0;
for (i = 0 ; i < 8 ; i = i + 1) begin
#5 mosi = $random;
#5 spck = 0;
#5 spck = 1;
end
#5 ncs=1;
#50 ncs=0;
for (i = 0 ; i < 8 ; i = i + 1) begin
#5 mosi = $random;
#5 spck = 0;
#5 spck = 1;
end
#5 ncs=1;
#50 mosi=1;
$finish;
end
endmodule // main

218
fpga/testbed_hi_read_tx.v
View file

@ -1,109 +1,109 @@
`include "hi_read_tx.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
shallow_modulation - modulation type
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_hi_read_tx;
reg pck0;
reg [7:0] adc_d;
reg shallow_modulation;
wire pwr_lo;
wire adc_clk;
reg ck_1356meg;
reg ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
wire cross_lo;
wire cross_hi;
wire dbg;
hi_read_tx #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg),
.shallow_modulation(shallow_modulation)
);
integer idx, i;
// main clock
always #5 begin
ck_1356megb = !ck_1356megb;
ck_1356meg = ck_1356megb;
end
//crank DUT
task crank_dut;
begin
@(posedge ssp_clk) ;
ssp_dout = $random;
end
endtask
initial begin
// init inputs
ck_1356megb = 0;
adc_d = 0;
ssp_dout=0;
// shallow modulation off
shallow_modulation=0;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
// shallow modulation on
shallow_modulation=1;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main
`include "hi_read_tx.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
shallow_modulation - modulation type
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_hi_read_tx;
reg pck0;
reg [7:0] adc_d;
reg shallow_modulation;
wire pwr_lo;
wire adc_clk;
reg ck_1356meg;
reg ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
wire cross_lo;
wire cross_hi;
wire dbg;
hi_read_tx #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg),
.shallow_modulation(shallow_modulation)
);
integer idx, i;
// main clock
always #5 begin
ck_1356megb = !ck_1356megb;
ck_1356meg = ck_1356megb;
end
//crank DUT
task crank_dut;
begin
@(posedge ssp_clk) ;
ssp_dout = $random;
end
endtask
initial begin
// init inputs
ck_1356megb = 0;
adc_d = 0;
ssp_dout=0;
// shallow modulation off
shallow_modulation=0;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
// shallow modulation on
shallow_modulation=1;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main

232
fpga/testbed_hi_simulate.v
View file

@ -1,116 +1,116 @@
`include "hi_simulate.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
mod_type - modulation type
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_hi_simulate;
reg pck0;
reg [7:0] adc_d;
reg mod_type;
wire pwr_lo;
wire adc_clk;
reg ck_1356meg;
reg ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
wire cross_lo;
wire cross_hi;
wire dbg;
hi_simulate #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg),
.mod_type(mod_type)
);
integer idx, i;
// main clock
always #5 begin
ck_1356megb = !ck_1356megb;
ck_1356meg = ck_1356megb;
end
always begin
@(negedge adc_clk) ;
adc_d = $random;
end
//crank DUT
task crank_dut;
begin
@(negedge ssp_clk) ;
ssp_dout = $random;
end
endtask
initial begin
// init inputs
ck_1356megb = 0;
// random values
adc_d = 0;
ssp_dout=1;
// shallow modulation off
mod_type=0;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
// shallow modulation on
mod_type=1;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main
`include "hi_simulate.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
mod_type - modulation type
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_hi_simulate;
reg pck0;
reg [7:0] adc_d;
reg mod_type;
wire pwr_lo;
wire adc_clk;
reg ck_1356meg;
reg ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
wire cross_lo;
wire cross_hi;
wire dbg;
hi_simulate #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg),
.mod_type(mod_type)
);
integer idx, i;
// main clock
always #5 begin
ck_1356megb = !ck_1356megb;
ck_1356meg = ck_1356megb;
end
always begin
@(negedge adc_clk) ;
adc_d = $random;
end
//crank DUT
task crank_dut;
begin
@(negedge ssp_clk) ;
ssp_dout = $random;
end
endtask
initial begin
// init inputs
ck_1356megb = 0;
// random values
adc_d = 0;
ssp_dout=1;
// shallow modulation off
mod_type=0;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
// shallow modulation on
mod_type=1;
for (i = 0 ; i < 16 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main

202
fpga/testbed_lo_read.v
View file

@ -1,101 +1,101 @@
`include "lo_read.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
lo_is_125khz - input freq selector (1=125Khz, 0=136Khz)
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal 1Mhz/1.09Mhz (pck0 / 2*(11+lo_is_125khz) )
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_lo_read;
reg pck0;
reg [7:0] adc_d;
reg lo_is_125khz;
reg [15:0] divisor;
wire pwr_lo;
wire adc_clk;
wire ck_1356meg;
wire ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
wire cross_lo;
wire cross_hi;
wire dbg;
lo_read #(5,10) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg),
.lo_is_125khz(lo_is_125khz),
.divisor(divisor)
);
integer idx, i, adc_val=8;
// main clock
always #5 pck0 = !pck0;
task crank_dut;
begin
@(posedge adc_clk) ;
adc_d = adc_val;
adc_val = (adc_val *2) + 53;
end
endtask
initial begin
// init inputs
pck0 = 0;
adc_d = 0;
ssp_dout = 0;
lo_is_125khz = 1;
divisor = 255; //min 16, 95=125Khz, max 255
// simulate 4 A/D cycles at 125Khz
for (i = 0 ; i < 8 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main
`include "lo_read.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
lo_is_125khz - input freq selector (1=125Khz, 0=136Khz)
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal 1Mhz/1.09Mhz (pck0 / 2*(11+lo_is_125khz) )
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_lo_read;
reg pck0;
reg [7:0] adc_d;
reg lo_is_125khz;
reg [15:0] divisor;
wire pwr_lo;
wire adc_clk;
wire ck_1356meg;
wire ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
wire cross_lo;
wire cross_hi;
wire dbg;
lo_read #(5,10) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg),
.lo_is_125khz(lo_is_125khz),
.divisor(divisor)
);
integer idx, i, adc_val=8;
// main clock
always #5 pck0 = !pck0;
task crank_dut;
begin
@(posedge adc_clk) ;
adc_d = adc_val;
adc_val = (adc_val *2) + 53;
end
endtask
initial begin
// init inputs
pck0 = 0;
adc_d = 0;
ssp_dout = 0;
lo_is_125khz = 1;
divisor = 255; //min 16, 95=125Khz, max 255
// simulate 4 A/D cycles at 125Khz
for (i = 0 ; i < 8 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main

202
fpga/testbed_lo_simulate.v
View file

@ -1,101 +1,101 @@
`include "lo_simulate.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_lo_simulate;
reg pck0;
reg [7:0] adc_d;
wire pwr_lo;
wire adc_clk;
wire ck_1356meg;
wire ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
reg cross_lo;
wire cross_hi;
wire dbg;
lo_simulate #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg)
);
integer i, counter=0;
// main clock
always #5 pck0 = !pck0;
//cross_lo is not really synced to pck0 but it's roughly pck0/192 (24Mhz/192=125Khz)
task crank_dut;
begin
@(posedge pck0) ;
counter = counter + 1;
if (counter == 192) begin
counter = 0;
ssp_dout = $random;
cross_lo = 1;
end else begin
cross_lo = 0;
end
end
endtask
initial begin
pck0 = 0;
for (i = 0 ; i < 4096 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main
`include "lo_simulate.v"
/*
pck0 - input main 24Mhz clock (PLL / 4)
[7:0] adc_d - input data from A/D converter
pwr_lo - output to coil drivers (ssp_clk / 8)
adc_clk - output A/D clock signal
ssp_frame - output SSS frame indicator (goes high while the 8 bits are shifted)
ssp_din - output SSP data to ARM (shifts 8 bit A/D value serially to ARM MSB first)
ssp_clk - output SSP clock signal
ck_1356meg - input unused
ck_1356megb - input unused
ssp_dout - input unused
cross_hi - input unused
cross_lo - input unused
pwr_hi - output unused, tied low
pwr_oe1 - output unused, undefined
pwr_oe2 - output unused, undefined
pwr_oe3 - output unused, undefined
pwr_oe4 - output unused, undefined
dbg - output alias for adc_clk
*/
module testbed_lo_simulate;
reg pck0;
reg [7:0] adc_d;
wire pwr_lo;
wire adc_clk;
wire ck_1356meg;
wire ck_1356megb;
wire ssp_frame;
wire ssp_din;
wire ssp_clk;
reg ssp_dout;
wire pwr_hi;
wire pwr_oe1;
wire pwr_oe2;
wire pwr_oe3;
wire pwr_oe4;
reg cross_lo;
wire cross_hi;
wire dbg;
lo_simulate #(5,200) dut(
.pck0(pck0),
.ck_1356meg(ck_1356meg),
.ck_1356megb(ck_1356megb),
.pwr_lo(pwr_lo),
.pwr_hi(pwr_hi),
.pwr_oe1(pwr_oe1),
.pwr_oe2(pwr_oe2),
.pwr_oe3(pwr_oe3),
.pwr_oe4(pwr_oe4),
.adc_d(adc_d),
.adc_clk(adc_clk),
.ssp_frame(ssp_frame),
.ssp_din(ssp_din),
.ssp_dout(ssp_dout),
.ssp_clk(ssp_clk),
.cross_hi(cross_hi),
.cross_lo(cross_lo),
.dbg(dbg)
);
integer i, counter=0;
// main clock
always #5 pck0 = !pck0;
//cross_lo is not really synced to pck0 but it's roughly pck0/192 (24Mhz/192=125Khz)
task crank_dut;
begin
@(posedge pck0) ;
counter = counter + 1;
if (counter == 192) begin
counter = 0;
ssp_dout = $random;
cross_lo = 1;
end else begin
cross_lo = 0;
end
end
endtask
initial begin
pck0 = 0;
for (i = 0 ; i < 4096 ; i = i + 1) begin
crank_dut;
end
$finish;
end
endmodule // main

54
fpga/util.v
View file

@ -1,27 +1,27 @@
//-----------------------------------------------------------------------------
// General-purpose miscellany.
//
// Jonathan Westhues, April 2006.
//-----------------------------------------------------------------------------
module mux8(sel, y, x0, x1, x2, x3, x4, x5, x6, x7);
input [2:0] sel;
input x0, x1, x2, x3, x4, x5, x6, x7;
output y;
reg y;
always @(x0 or x1 or x2 or x3 or x4 or x5 or x6 or x7 or sel)
begin
case (sel)
3'b000: y = x0;
3'b001: y = x1;
3'b010: y = x2;
3'b011: y = x3;
3'b100: y = x4;
3'b101: y = x5;
3'b110: y = x6;
3'b111: y = x7;
endcase
end
endmodule
//-----------------------------------------------------------------------------
// General-purpose miscellany.
//
// Jonathan Westhues, April 2006.
//-----------------------------------------------------------------------------
module mux8(sel, y, x0, x1, x2, x3, x4, x5, x6, x7);
input [2:0] sel;
input x0, x1, x2, x3, x4, x5, x6, x7;
output y;
reg y;
always @(x0 or x1 or x2 or x3 or x4 or x5 or x6 or x7 or sel)
begin
case (sel)
3'b000: y = x0;
3'b001: y = x1;
3'b010: y = x2;
3'b011: y = x3;
3'b100: y = x4;
3'b101: y = x5;
3'b110: y = x6;
3'b111: y = x7;
endcase
end
endmodule

2
fpga/xst.scr
View file

@ -1 +1 @@
run -ifn fpga.v -ifmt Verilog -ofn fpga.ngc -ofmt NGC -p xc2s30-6vq100 -opt_mode Speed -opt_level 1 -ent fpga
run -ifn fpga.v -ifmt Verilog -ofn fpga.ngc -ofmt NGC -p xc2s30-6vq100 -opt_mode Speed -opt_level 1 -ent fpga

78
tools/at91sam7s256-armusbocd-flash-program.cfg
View file

@ -1,39 +1,39 @@
#define our ports
telnet_port 4444
gdb_port 3333
#commands specific to the Olimex ARM-USB-OCD Dongle
interface ft2232
ft2232_device_desc "Olimex OpenOCD JTAG"
ft2232_layout "olimex-jtag"
ft2232_vid_pid 0x15BA 0x0003
jtag_speed 2
jtag_nsrst_delay 200
jtag_ntrst_delay 200
#reset_config <signals> [combination] [trst_type] [srst_type]
reset_config srst_only srst_pulls_trst
#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
jtag_device 4 0x1 0xf 0xe
#daemon_startup <'attach'|'reset'>
daemon_startup reset
#target <type> <endianess> <reset_mode> <jtag#> [variant]
target arm7tdmi little run_and_init 0 arm7tdmi_r4
#run_and_halt_time <target#> <time_in_ms>
run_and_halt_time 0 30
# commands below are specific to AT91sam7 Flash Programming
# ---------------------------------------------------------
#target_script specifies the flash programming script file
target_script 0 reset script.ocd
#working_area <target#> <address> <size> <'backup'|'nobackup'>
working_area 0 0x40000000 0x4000 nobackup
#flash bank at91sam7 0 0 0 0 <target#>
flash bank at91sam7 0 0 0 0 0
#define our ports
telnet_port 4444
gdb_port 3333
#commands specific to the Olimex ARM-USB-OCD Dongle
interface ft2232
ft2232_device_desc "Olimex OpenOCD JTAG"
ft2232_layout "olimex-jtag"
ft2232_vid_pid 0x15BA 0x0003
jtag_speed 2
jtag_nsrst_delay 200
jtag_ntrst_delay 200
#reset_config <signals> [combination] [trst_type] [srst_type]
reset_config srst_only srst_pulls_trst
#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
jtag_device 4 0x1 0xf 0xe
#daemon_startup <'attach'|'reset'>
daemon_startup reset
#target <type> <endianess> <reset_mode> <jtag#> [variant]
target arm7tdmi little run_and_init 0 arm7tdmi_r4
#run_and_halt_time <target#> <time_in_ms>
run_and_halt_time 0 30
# commands below are specific to AT91sam7 Flash Programming
# ---------------------------------------------------------
#target_script specifies the flash programming script file
target_script 0 reset script.ocd
#working_area <target#> <address> <size> <'backup'|'nobackup'>
working_area 0 0x40000000 0x4000 nobackup
#flash bank at91sam7 0 0 0 0 <target#>
flash bank at91sam7 0 0 0 0 0

48
tools/at91sam7s256-jtagkey.cfg
View file

@ -1,24 +1,24 @@
#define our ports
telnet_port 4444
gdb_port 3333
#commands specific to the Amontec JTAGKey
interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
jtag_khz 200
jtag_nsrst_delay 200
jtag_ntrst_delay 200
#reset_config <signals> [combination] [trst_type] [srst_type]
reset_config srst_only srst_pulls_trst
jtag newtap sam7x256 cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f
target create sam7x256.cpu arm7tdmi -endian little -chain-position sam7x256.cpu -variant arm7tdmi
gdb_memory_map enable
sam7x256.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0
flash bank at91sam7 0x100000 0x40000 0 4 sam7x256.cpu
#define our ports
telnet_port 4444
gdb_port 3333
#commands specific to the Amontec JTAGKey
interface ft2232
ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
jtag_khz 200
jtag_nsrst_delay 200
jtag_ntrst_delay 200
#reset_config <signals> [combination] [trst_type] [srst_type]
reset_config srst_only srst_pulls_trst
jtag newtap sam7x256 cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f
target create sam7x256.cpu arm7tdmi -endian little -chain-position sam7x256.cpu -variant arm7tdmi
gdb_memory_map enable
sam7x256.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0
flash bank at91sam7 0x100000 0x40000 0 4 sam7x256.cpu

78
tools/at91sam7s256-wiggler.cfg
View file

@ -1,39 +1,39 @@
telnet_port 4444
gdb_port 3333
interface parport
parport_port 0x378
parport_cable wiggler
jtag_speed 0
jtag_nsrst_delay 200
jtag_ntrst_delay 200
reset_config srst_only srst_pulls_trst
jtag newtap sam7x256 cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f
#jtag newtap xilinx tap -irlen 6 -ircapture 0x1 -irmask 0xf -expected-id 0x1c1a093
target create sam7x256.cpu arm7tdmi -endian little -chain-position sam7x256.cpu -variant arm7tdmi
sam7x256.cpu configure -event reset-init {
# disable watchdog
mww 0xfffffd44 0x00008000
# enable user reset
mww 0xfffffd08 0xa5000001
# CKGR_MOR : enable the main oscillator
mww 0xfffffc20 0x00000601
sleep 10
# CKGR_PLLR: 16 MHz * (5+1) /1 = 96Mhz
mww 0xfffffc2c 0x00051c01
sleep 10
# PMC_MCKR : MCK = PLL / 2 = 48 MHz
mww 0xfffffc30 0x00000007
sleep 10
# MC_FMR: flash mode (FWS=1,FMCN=60)
mww 0xffffff60 0x003c0100
sleep 100
}
gdb_memory_map enable
sam7x256.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0
flash bank at91sam7 0 0 0 0 0
telnet_port 4444
gdb_port 3333
interface parport
parport_port 0x378
parport_cable wiggler
jtag_speed 0
jtag_nsrst_delay 200
jtag_ntrst_delay 200
reset_config srst_only srst_pulls_trst
jtag newtap sam7x256 cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x3f0f0f0f
#jtag newtap xilinx tap -irlen 6 -ircapture 0x1 -irmask 0xf -expected-id 0x1c1a093
target create sam7x256.cpu arm7tdmi -endian little -chain-position sam7x256.cpu -variant arm7tdmi
sam7x256.cpu configure -event reset-init {
# disable watchdog
mww 0xfffffd44 0x00008000
# enable user reset
mww 0xfffffd08 0xa5000001
# CKGR_MOR : enable the main oscillator
mww 0xfffffc20 0x00000601
sleep 10
# CKGR_PLLR: 16 MHz * (5+1) /1 = 96Mhz
mww 0xfffffc2c 0x00051c01
sleep 10
# PMC_MCKR : MCK = PLL / 2 = 48 MHz
mww 0xfffffc30 0x00000007
sleep 10
# MC_FMR: flash mode (FWS=1,FMCN=60)
mww 0xffffff60 0x003c0100
sleep 100
}
gdb_memory_map enable
sam7x256.cpu configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x10000 -work-area-backup 0
flash bank at91sam7 0 0 0 0 0