* add a specific check function for static nonces in 'hf mf nested'
* uses a fixed nr_enc and does all the crypto operations on client
* for all possible keys calculate par_enc and ar_enc and send them to device
* CHANGELOG update
* add separate timeout for tag response to nr_ar
* measure response time and use it for response timeout
* don't drop field between keyblocks
* some reformatting
* some whitespace fixes
* fishing for microseconds in TransmitFor14443a()
* allow arbitrary number of keys in MifareChkKeys()
* and move progress printing to MifareChkKeys()
Co-authored-by: uzlonewolf <github_com@hacker-nin.com>
* chg: write new dump file format by @mceloff
* chg: rename 'hf mfu dump' option 'n' to 'f' to align with other commands and RRG repo
* chg: replace ISO14443A_CMD_READBLOCK by MIFARE_CMD_READBLOCK, same for WRITEBLOCK
* fix: mifare_ultra_readblock() returned 14 bytes instead of 16
* chg: param_gethex_ex() now checks maximum output buffer length
* chg: ul_comp_write() was incomplete and for magic testing only
* fix: 16bit ULC counter had been displayed as 32bit
* chg: add check for 7 Byte UID, drop check for ATQA in type identification GetHF14AMfU_Type()
* fix: send HALT instead of dropping field in order to maintain a defined state
* chg: DropField() when command ends
* chg: check for invalid page ranges in 'hf mfu dump'
* fix: print correct lock bits when page range is used
* fix: do not write (incomplete) dumpfile when page range is used
* add: use UID for filename when no filename is given (RRG repo)
* chg: don't clear trace on each ULC authentication, clear trace at beginning of each command
* fix: don't send (DESFire?) deselect command after authentication
* fix parity encryption (thanks to Eloff, http://www.proxmark.org/forum/viewtopic.php?id=6347)
* add support to simulate Mifare Mini, Mifare 2K and Mifare 4K
* change to standard LED handling (A: PM is working, B: reader is sending, C: tag is responding, D: HF field is on)
* NAK on unknown commands
* allow unencrypted HALT
* don't display messages during simulation (or we will miss next reader command)
* use DMA to receive reader command
* switch earlier from send to listen mode
* move ADC initializer to iso14443_setup
* remove remainders of incomplete Mifare 10Byte UID simulation
* show 'short' bytes (7Bits or 8Bits without parity) in 'hf list mf' and 'hf list 14a'
* whitespace
* more timing fixes
* correctly determine correction bit (taken from iceman's fork)
* add checking of Access Conditions for Read command
* never allow reading KeyA
* move to separate files mifaresim.[ch]
* check CRC of commands
* don't execute commands without successfull authentication
* ensure correct timing of REQA, WUPA, ANTICOL and SELECT responses
* trace reader commands immediately, only fix start time after tag response. Decreases time to be ready for next reader command.
* remove iso14443-4 remnants
* trace raw reader commands instead of decrypted ones
* some refactoring
* fix hf mf sim
* timing: decrease time to get ready for new reader commands
Improve hf mf chk and hf mf nested
* hf mf chk. added interrupt of procedure by usb
* extract mifare default keys into separate module
* arm side multisector `hf mf chk`
* hf mf nested. change key search procedure
* hf mf nested. added key check after we have found a key.
* small fix hf list f
* hf mf chk. add timeout (arm side) and some tweaks.
+ add xor calc to util (prep for desfire)
commented out MifareUWriteBlockCompat as it isn't used in client
currently (it is a command we could support.. but why?)
relabeled a few device side mfu functions to be clearer.
- provided a BigBuf_malloc() function to dynamically allocate parts of BigBuf
e.g. for DMA-Buffers, Frame-Buffers, Emulator-Memory
- the whole rest of BigBuf is now available for traces (instead of a small fixed amount)
- send actual traceLen together with trace data
- changed client side to cope with varying traceLen
- changed small buffers to automatic variables instead of parts of BigBuf
ADD: added a manufacturer list in "hf 14a reader", only viable when UID is double or triple size. Thanks to Asper for the list.
ADD: detect chinese magic backdoor commands in "hf 14a reader"
CHG: minor code clean up.
CHG: USB_CMD_DATA_SIZE is now used as maxsize for transfer of data between client and pm3device
CHG: suggested a fix for the underscore problem in ioclass\fileutils.c
ADD: tnp3xx support
ADD: nxp tag idents.
ADD: identifiction of chinese backdoor commands to hf 14a reader.
- buffers were too small to handle 256 byte frames
- parity bits were only handled for up to 32 byte frames
- trace format was inefficient
- removed parity calculation from decoders in iclass.c (parity not used on air anyway)
- hf mf rdsc (fix): didn't account for 16 block sectors, allowed max sector 63 instead of 39
- hf mf ecfill (add): added (optional) card size parameter and support for non 1K cards
- hf mf dump (add): added (optional) card size parameter and support for non 1K cards
- hf mf dump (fix): Access Condition 011 not handled correctly (tried to access with key A)
- hf mf restore (add): added (optional) card size parameter and support for non 1K cards
- hf mf nested (fix): didn't account for 16 block sectors, allowed max sector 63 instead of 39
- hf mf nested (fix): always dumped 16 keys to dumpkeys.bin instead of correct number
- hf mf chk (fix): always dumped 16 keys to dumpkeys.bin instead of correct number
- hf mf eget (fix): displayed three instead of one block
- hf mf eload (add): load 4K .eml files (but accepts 1K .eml files for backwards compatibility)
- hf mf esave (add): always save the whole emulator memory (4K) instead of 1K only
- hf mf ecfill (add): added (optional) card size parameter and support for non 1K cards
- PM: used GetCountMifare in MifareNested() for improved timing accuracy and to deliver better quality nonces
- PM: MifareNested now delivers exactly two different nonces to avoid time consuming multiple lfsr_recovery32() on client side
- Client: replaced quicksort by bucketsort in crapto1.c which is faster
- Client: use multithreading (two parallel calls to lfsr_recovery32())
- Client: fixed a small bug in mfnested() (always showed trgkey=0)
- Client: introduced a mutex for PrintAndLog() to avoid interlaced printing
Minor rework of hf mf chk:
- Avoid time consuming off/on cycles. Send a "halt" instead.
2. added increment, decrement, restore, transfer commands
3. fixed several small bugs and small code cleaning
4. there is strange behavier in the emulator: for 7BUID is seems that there is must be a feature that cam make work card withouth 2nd anticollision loop. NXP reader authenticates, but cant read card contents. all the rest readers works, BUT.... my 7BUID mifare card dont work AT ALL .... I dont know what i should do )
2. added abilities to: clear, get, set, load from card, load from nested card emulator dump
3. tried to fix proxmark promt have seen everywhere (not so good)
4. reorganized arm code
2. emulator commands select, authenticate, read block, write block works
3. nested authentication - not working (maybe next release)
4. small bugfixes
5. mifare1ksim - in alpha state!!! code not so clear!!!
1. commands changed from "hf 14a" to "hf mf"
2. some code cleaning and small bugfixes
3. alpha version hf mf sim
4. added internal function GetTickCount() for time measuring
