* merge cmd.c into usb_cdc.c
* move back usb_cdc.[ch] to common/
* declare low level functions usb_read() and usb_write() and more functions as static
* use cmd_receive() in bootrom.c and appmain.c
* remove unused memory wasting csrTab[100] in usb_cdc.c
* replace more byte_t by uint8_t
* more whitespace fixes
* chg: write new dump file format by @mceloff
* chg: rename 'hf mfu dump' option 'n' to 'f' to align with other commands and RRG repo
* chg: replace ISO14443A_CMD_READBLOCK by MIFARE_CMD_READBLOCK, same for WRITEBLOCK
* fix: mifare_ultra_readblock() returned 14 bytes instead of 16
* chg: param_gethex_ex() now checks maximum output buffer length
* chg: ul_comp_write() was incomplete and for magic testing only
* fix: 16bit ULC counter had been displayed as 32bit
* chg: add check for 7 Byte UID, drop check for ATQA in type identification GetHF14AMfU_Type()
* fix: send HALT instead of dropping field in order to maintain a defined state
* chg: DropField() when command ends
* chg: check for invalid page ranges in 'hf mfu dump'
* fix: print correct lock bits when page range is used
* fix: do not write (incomplete) dumpfile when page range is used
* add: use UID for filename when no filename is given (RRG repo)
* chg: don't clear trace on each ULC authentication, clear trace at beginning of each command
* fix: don't send (DESFire?) deselect command after authentication
* fix parity encryption (thanks to Eloff, http://www.proxmark.org/forum/viewtopic.php?id=6347)
* add support to simulate Mifare Mini, Mifare 2K and Mifare 4K
* change to standard LED handling (A: PM is working, B: reader is sending, C: tag is responding, D: HF field is on)
* NAK on unknown commands
* allow unencrypted HALT
* don't display messages during simulation (or we will miss next reader command)
* use DMA to receive reader command
* switch earlier from send to listen mode
* move ADC initializer to iso14443_setup
* remove remainders of incomplete Mifare 10Byte UID simulation
* show 'short' bytes (7Bits or 8Bits without parity) in 'hf list mf' and 'hf list 14a'
* whitespace
* detect and use RDV40 higher voltage ADC channel for hw tune, hf tune, hw detectreader
* fix mode switching in hw detectreader
* detect Smartcard Slot in hw version
* i2c changes from https://github.com/RfidResearchGroup/proxmark3
* some formatting in proxmark3.h
* more timing fixes
* correctly determine correction bit (taken from iceman's fork)
* add checking of Access Conditions for Read command
* never allow reading KeyA
* move to separate files mifaresim.[ch]
* check CRC of commands
* don't execute commands without successfull authentication
* ensure correct timing of REQA, WUPA, ANTICOL and SELECT responses
* trace reader commands immediately, only fix start time after tag response. Decreases time to be ready for next reader command.
* remove iso14443-4 remnants
* trace raw reader commands instead of decrypted ones
* some refactoring
* fix hf mf sim
* timing: decrease time to get ready for new reader commands
