github/RRG-Proxmark3
1
0
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2025-08-20 21:33:47 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 4

Whitespace, formatting

Browse source
This commit is contained in:
Alex 2023-08-24 18:21:07 +02:00
commit 3e4b7d07ff
10 changed files with 332 additions and 353 deletions
Download patch file Download diff file Expand all files Collapse all files

120
fpga/lf_edge_detect.v
View file

@ -1,4 +1,3 @@
//-----------------------------------------------------------------------------
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
//
@ -30,73 +29,74 @@ module lf_edge_detect(
output edge_toggle
);
min_max_tracker tracker(
.clk (clk),
.adc_d (adc_d),
.threshold (lf_ed_threshold),
.min (min),
.max (max)
min_max_tracker tracker(
.clk (clk),
.adc_d (adc_d),
.threshold (lf_ed_threshold),
.min (min),
.max (max)
);
// auto-tune
assign high_threshold = (max + min) / 2 + (max - min) / 4;
assign highz_threshold = (max + min) / 2 + (max - min) / 8;
assign lowz_threshold = (max + min) / 2 - (max - min) / 8;
assign low_threshold = (max + min) / 2 - (max - min) / 4;
// auto-tune
assign high_threshold = (max + min) / 2 + (max - min) / 4;
assign highz_threshold = (max + min) / 2 + (max - min) / 8;
assign lowz_threshold = (max + min) / 2 - (max - min) / 8;
assign low_threshold = (max + min) / 2 - (max - min) / 4;
// heuristic to see if it makes sense to try to detect an edge
wire enabled =
(high_threshold > highz_threshold)
& (highz_threshold > lowz_threshold)
& (lowz_threshold > low_threshold)
& ((high_threshold - highz_threshold) > 8)
& ((highz_threshold - lowz_threshold) > 16)
& ((lowz_threshold - low_threshold) > 8);
// heuristic to see if it makes sense to try to detect an edge
wire enabled =
(high_threshold > highz_threshold)
& (highz_threshold > lowz_threshold)
& (lowz_threshold > low_threshold)
& ((high_threshold - highz_threshold) > 8)
& ((highz_threshold - lowz_threshold) > 16)
& ((lowz_threshold - low_threshold) > 8);
// Toggle the output with hysteresis
// Set to high if the ADC value is above the threshold
// Set to low if the ADC value is below the threshold
reg is_high = 0;
reg is_low = 0;
reg is_zero = 0;
reg trigger_enabled = 1;
reg output_edge = 0;
reg output_state;
// Toggle the output with hysteresis
// Set to high if the ADC value is above the threshold
// Set to low if the ADC value is below the threshold
reg is_high = 0;
reg is_low = 0;
reg is_zero = 0;
reg trigger_enabled = 1;
reg output_edge = 0;
reg output_state;
always @(posedge clk)
always @(posedge clk)
begin
is_high <= (adc_d >= high_threshold);
is_low <= (adc_d <= low_threshold);
is_zero <= ((adc_d > lowz_threshold) & (adc_d < highz_threshold));
end
// all edges detection
always @(posedge clk)
if (enabled)
begin
// To enable detecting two consecutive peaks at the same level
// (low or high) we check whether or not we went back near 0 in-between.
// This extra check is necessary to prevent from noise artifacts
// around the threshold values.
if (trigger_enabled & (is_high | is_low))
begin
is_high <= (adc_d >= high_threshold);
is_low <= (adc_d <= low_threshold);
is_zero <= ((adc_d > lowz_threshold) & (adc_d < highz_threshold));
output_edge <= ~output_edge;
trigger_enabled <= 0;
end
else
trigger_enabled <= trigger_enabled | is_zero;
end
// all edges detection
always @(posedge clk)
if (enabled)
begin
// To enable detecting two consecutive peaks at the same level
// (low or high) we check whether or not we went back near 0 in-between.
// This extra check is necessary to prevent from noise artifacts
// around the threshold values.
if (trigger_enabled & (is_high | is_low))
begin
output_edge <= ~output_edge;
trigger_enabled <= 0;
end else
trigger_enabled <= trigger_enabled | is_zero;
end
// edge states
always @(posedge clk)
if (enabled)
begin
if (is_high)
output_state <= 1'd1;
else if (is_low)
output_state <= 1'd0;
end
// edge states
always @(posedge clk)
if (enabled)
begin
if (is_high)
output_state <= 1'd1;
else if (is_low)
output_state <= 1'd0;
end
assign edge_state = output_state;
assign edge_toggle = output_edge;
assign edge_state = output_state;
assign edge_toggle = output_edge;
endmodule