* don't do READCHECK when not trying to authenticate
* standard LED handling
* remove unused FLAG_ICLASS_READER_ONLY_ONCE and FLAG_ICLASS_READER_ONE_TRY
* sanity check for negative times in TransmitTo15693Tag()
* increase reader timeout for 'hf 15' functions to be enough for slot 7 answers to ACTALL
* add 'hf iclass permute' inspired by RRG repository
* whitespace fixes
* chg to reader command decoder in iso15693.c (require no modulation before SOF)
* add 'has_been_low_for' logic to hi_simulate.v (same as in other FPGA modes, default to "no modulation")
* add simulation of chip status (IDLE, ACTIVE, SELECTED, HALTED)
* check ACSN on SELECT
* add simulation of RESELECT
* always check length of reader commands
* fix printing of NR, MAC in sim 2 mode
* fix response length to CHECK command
* make uart_communication(), storeCommand() and getCommand() static in comms.c
* move receiver thread creation and respective mutexes to comms.c
* add mutex and signal for tx buffer
* use comms.c for flasher as well
* remove comm functions from client/proxmark3.h
* this completes isolating all USB communication related functions in comms.c
* don't assume a port to be defined by a name. Change parameter in OpenProxmark() to void*
* comms.c: set sp and serial_port_name to NULL when offline
* this should fix crashes reported in issue #497
* don't allow receiver thread to write directly into arbitrary main thread's memory
* instead use cmdBuffer[] for CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K as well
* add timeout and warning options to GetFromBigBuf(), same as in WaitForResponseTimeoutW()
* move GetFromBigBuf() from data.c to comms.c
* remove data.c and data.h
endless loop in reader if no tag was found
button press on pm3 did not cancel.
led_b was left on in some cases
also moved 14b detection to last in hf search to help speed up the
command for the other tags. 14b is slow (does multiple tests)
Thanks to @Fl0-0 and @pwpiwi for their idenfication of some of the
issues.
memory locations in code are now accurate and the CC output is not
corrupted by the config's crc.
also the looping and flags for what to read are now correctly
implemented in the code.
clean up output
allow readblock without authenticating (can read blocks 0, 1, 2, 5
without authenticating.)
add Application Issuer Area to reader output and use it to attempt to
identify legacy vs NOT legacy.
CHG: USB_CMD_DATA_SIZE is now used as maxsize for transfer of data between client and pm3device
CHG: suggested a fix for the underscore problem in ioclass\fileutils.c
ADD: tnp3xx support
ADD: nxp tag idents.
ADD: identifiction of chinese backdoor commands to hf 14a reader.
