* add separate timeout for tag response to nr_ar
* measure response time and use it for response timeout
* don't drop field between keyblocks
* some reformatting
* some whitespace fixes
* fishing for microseconds in TransmitFor14443a()
* allow arbitrary number of keys in MifareChkKeys()
* and move progress printing to MifareChkKeys()
Co-authored-by: uzlonewolf <github_com@hacker-nin.com>
* check for correct responses after block updates
* reduce number of tries from 10 to 3
* Allow to override warning on attempt to clone blocks < 5
* add same warning and override option to 'hf iclass writebl'
* some reformatting and minor refactoring
* Drop field after dump and clone functions
* If dumping AA1 with Credit Key, authenticate as Debit Key
* Initialize reader when beginning to clone
FIX: command "hf mf ekeyprn d" doesn't use the correct offset to locate the A key in data[] array and record the 2 last bytes followed by 4 0x00 instead of the 6 good bytes (All the A keys are corrupted in file dumpkeys.bin). B keys are not affected.
* add detection of static tag nonces
* add tag nonce to error message
* modify mfCheckKeys() to pass button press events upstream
* don't abort nested when a static nonce is encountered
* modify nested to try multiple keys in a single operation
* Print keys remaining only every 10 seconds, and add estimated worst-case time
* fix 'hf 15 csetuid'
* check for error codes, prevent client crash
* some include file refactoring
* some whitespace fixes
* allow longer timeout for write commands
* add function to send EOF only
* modify 'hf list 15' to display "<EOF>"
* add tracing of Reader commands
* if REQ_OPTION is set on write commands, send separate EOF to request tag response
* use #defines instead of hex constants
* switch off field after UID update
* return last tag response (if there is any)
* iso15693: decode WRITE_MULTI_BLOCK in 'hf list 15'
* Check for Credidt Keys as well
* reduce authentication tries from 6 to 3
* correct text in 'hf iclass clone' for 'l' parameter
* some reformatting and whitespace fixes
* Bugfix: Output typing on print of HID card formats
The 'PrintAndLog' calls were using signed types and sometimes too few bits in width for formatting/outputting the data as was revealed in the forums. This commit will correct the printf-formatted output typing on display of the fields.
* Update hidcardformats.c
Updated to use macros as requested by @pwpiwi
* don't display error message during 'lf search' when no Hitag tag is present
* remove superfluous options in 'lf hitag read'
* fix setting of default threshold when selecting FPGA_CMD_SET_EDGE_DETECT_THRESHOLD major mode
* some refactoring
* fix long option --jam
* make room for one more bit for FPGA minor mode
* new mode FPGA_HF_READER_MODE_SEND_JAM
* implement jamming in Handle15693SampleFromReader
* switch to argtable command line parsing (i.e. options must now be preceded by '-')
* add option '-r' to display relative times
* add option '-u' to display times in microseconds
* fix: graceful exit if trace is requested from offline PM3
* add loooong timeout for UPDATE command
* add flags FLAG_ICLASS_READER_INIT and FLAG_ICLASS_READER_CLEARTRACE
* don't overwrite trace buffer during 'hf iclass dump'
* fix long waiting time when start_time==0 in TransmitTo15693Tag()
* remove some additional debug prints
* refactoring: move helper functions from protocols.c to cmdhficlass.c
* add 'h' and '1' options to 'hf iclass reader' (from RRG repository)
* use correct key when only CreditKey is given in 'hf iclass dump'
* separate select_and_auth
* DropField() on errors
* dump last block in 'hf iclass dump'
* display correct memory size (number of blocks) in 'hf iclass reader' and dump
* more whitespace fixes
* don't do READCHECK when not trying to authenticate
* standard LED handling
* remove unused FLAG_ICLASS_READER_ONLY_ONCE and FLAG_ICLASS_READER_ONE_TRY
* sanity check for negative times in TransmitTo15693Tag()
* increase reader timeout for 'hf 15' functions to be enough for slot 7 answers to ACTALL
* add 'hf iclass permute' inspired by RRG repository
* whitespace fixes
* code deduplication. Use functions from iso15693.c
* speedup CodeIso15693AsReader()
* invert reader command coding. 0 now means 'unmodulated' ( = field on)
* decode SOF only as a valid tag response in Handle15693SamplesFromTag()
* complete decoding of EOF in Handle15693SamplesFromTag()
* determine and write correct times to trace
* FPGA-change: generate shorter frame signal to allow proper sync in StartCountSspClk()
* modify StartCountSspClk() for 16bit SSC transfers
* whitespace in util.c
* add specific LogTrace_ISO15693() with scaled down duration. Modify cmdhflist.c accordingly.
* allow 'hf 15 raw' with single byte commands
* check for buffer overflow, card timeout and single SOF in 'hf 15 raw'
* add simulation of multiple pages (PAGESEL by @sherhannn9)
* maintain cipher states per page
* update cipher state after UPDATE commands (@sherhannn9)
* add simulation of personalization mode
* respond with SOF on HALT
* display "<SOF>" instead of "0f" in 'hf list iclass'
* standard LED handling
* chg to reader command decoder in iso15693.c (require no modulation before SOF)
* add 'has_been_low_for' logic to hi_simulate.v (same as in other FPGA modes, default to "no modulation")
* add simulation of chip status (IDLE, ACTIVE, SELECTED, HALTED)
* check ACSN on SELECT
* add simulation of RESELECT
* always check length of reader commands
* fix printing of NR, MAC in sim 2 mode
* fix response length to CHECK command
* fix debug print on unhandled commands
* deduplicate: use sim functions from iso15693.c
* fix times in tracelog and 'hf list iclass' (sim only)
* don't check parity in 'hf list iclass'
* fix timing in TransmitTo15693Reader()
* (PRs 233, 303, 304 by @ViRb3 on https://github.com/RfidResearchGroup/proxmark3)
* replace byte_t by uint8_t
* note that Hitag1 commands are not yet available
* whitespace fixes
* #define Hitag2 commands
* whitespace
* add EOF wait time
* add powerup wait time
* don't repeatedly clear trace while running (PR 243 by @mceloff from https://github.com/RfidResearchGroup/proxmark3)
* standard LED handling
* better check for key file syntax
* get rid of "res" column when printing the result. Show unknown keys more prominent as " ? "
* add support for elliptic curve 'secp128r1' to mbedtls library
* change ecdsa_signature_verify() to allow different curves, signature lengths, and skipping hash
* add another public key for Mifare Ultralight EV1
* add "samples to skip" for lf config (mainly for lf snoop)
* add lf em 4x05protect command to write protection on em4x05 chips
* fix spacing
* and remove old comment git added back in..
* update changelog
* fix flags - only need 1 bit
Changes :
- Added t55xx downlink protocols (long leading reference, leading 0 and 1 of 4)
- Added function to all read to call differnet downlink functions (to match write)
- Update functions to support using differnet downlink modes.
- Added support for calling downlink modes for lf t55 read, write and detect
- Added new function lf t55 bruteforcedl to support downlink modes as well as try each mode
for each password in password file.
for functions with downlink mode extenstion.
e <mode> - OPTIONAL downlink encoding '0' fixed-bit-length (default),
'1' Long Zero Reference,
'2' Leading Zero,
'3' 1 of 4
* chg: write new dump file format by @mceloff
* chg: rename 'hf mfu dump' option 'n' to 'f' to align with other commands and RRG repo
* chg: replace ISO14443A_CMD_READBLOCK by MIFARE_CMD_READBLOCK, same for WRITEBLOCK
* fix: mifare_ultra_readblock() returned 14 bytes instead of 16
* chg: param_gethex_ex() now checks maximum output buffer length
* chg: ul_comp_write() was incomplete and for magic testing only
* fix: 16bit ULC counter had been displayed as 32bit
* chg: add check for 7 Byte UID, drop check for ATQA in type identification GetHF14AMfU_Type()
* fix: send HALT instead of dropping field in order to maintain a defined state
* chg: DropField() when command ends
* chg: check for invalid page ranges in 'hf mfu dump'
* fix: print correct lock bits when page range is used
* fix: do not write (incomplete) dumpfile when page range is used
* add: use UID for filename when no filename is given (RRG repo)
* chg: don't clear trace on each ULC authentication, clear trace at beginning of each command
* fix: don't send (DESFire?) deselect command after authentication
