Add capability to correlate against subcarriers of 212kHz (argument FPGA_HF_READER_RX_XCORR_QUARTER_FREQ | FPGA_HF_READER_RX_XCORR_848_KHZ) and 106kHz (argument FPGA_HF_READER_RX_XCORR_QUARTER_FREQ)

armsrc/apps.h

@@ -53,6 +53,7 @@ void SetAdcMuxFor(DWORD whichGpio);
 // Options for the HF reader, correlating against rx from tag
 #define FPGA_HF_READER_RX_XCORR_848_KHZ				(1<<0)
 #define FPGA_HF_READER_RX_XCORR_SNOOP				(1<<1)
+#define FPGA_HF_READER_RX_XCORR_QUARTER_FREQ			(1<<2)
 // Options for the HF simulated tag, how to modulate
 #define FPGA_HF_SIMULATOR_NO_MODULATION				(0<<0)
 #define FPGA_HF_SIMULATOR_MODULATE_BPSK				(1<<0)

fpga/fpga.v

@@ -103,6 +103,10 @@ assign hi_read_rx_xcorr_848 = conf_word[0];
 wire hi_read_rx_xcorr_snoop;
 assign hi_read_rx_xcorr_snoop = conf_word[1];
 
+// Divide the expected subcarrier frequency for hi_read_rx_xcorr by 4
+wire hi_read_rx_xcorr_quarter;
+assign hi_read_rx_xcorr_quarter = conf_word[2];
+
 // For the high-frequency simulated tag: what kind of modulation to use.
 wire [2:0] hi_simulate_mod_type;
 assign hi_simulate_mod_type = conf_word[2:0];
@@ -158,7 +162,7 @@ hi_read_rx_xcorr hrxc(
 	hrxc_ssp_frame, hrxc_ssp_din, ssp_dout, hrxc_ssp_clk,
 	cross_hi, cross_lo,
 	hrxc_dbg,
-	hi_read_rx_xcorr_848, hi_read_rx_xcorr_snoop
+	hi_read_rx_xcorr_848, hi_read_rx_xcorr_snoop, hi_read_rx_xcorr_quarter
 );
 
 hi_simulate hs(

fpga/hi_read_rx_xcorr.v

@@ -10,7 +10,7 @@ module hi_read_rx_xcorr(
     ssp_frame, ssp_din, ssp_dout, ssp_clk,
     cross_hi, cross_lo,
     dbg,
-    xcorr_is_848, snoop
+    xcorr_is_848, snoop, xcorr_quarter_freq
 );
     input pck0, ck_1356meg, ck_1356megb;
     output pwr_lo, pwr_hi, pwr_oe1, pwr_oe2, pwr_oe3, pwr_oe4;
@@ -20,7 +20,7 @@ module hi_read_rx_xcorr(
     output ssp_frame, ssp_din, ssp_clk;
     input cross_hi, cross_lo;
     output dbg;
-    input xcorr_is_848, snoop;
+    input xcorr_is_848, snoop, xcorr_quarter_freq;
 
 // Carrier is steady on through this, unless we're snooping.
 assign pwr_hi = ck_1356megb & (~snoop);
@@ -36,9 +36,19 @@ reg fc_div_2;
 always @(posedge ck_1356meg)
     fc_div_2 = ~fc_div_2;
 
+reg fc_div_4;
+always @(posedge fc_div_2)
+    fc_div_4 = ~fc_div_4;
+
+reg fc_div_8;
+always @(posedge fc_div_4)
+    fc_div_8 = ~fc_div_8;
+
 reg adc_clk;
 
-always @(xcorr_is_848 or fc_div_2 or ck_1356meg)
+always @(xcorr_is_848 or xcorr_quarter_freq or ck_1356meg)
+    if(~xcorr_quarter_freq)
+    begin
 	    if(xcorr_is_848)
 	        // The subcarrier frequency is fc/16; we will sample at fc, so that 
 	        // means the subcarrier is 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 ...
@@ -47,6 +57,16 @@ always @(xcorr_is_848 or fc_div_2 or ck_1356meg)
 	        // The subcarrier frequency is fc/32; we will sample at fc/2, and
 	        // the subcarrier will look identical.
 	        adc_clk <= fc_div_2;
+    end
+    else
+    begin
+	    if(xcorr_is_848)
+	        // The subcarrier frequency is fc/64
+	        adc_clk <= fc_div_4;
+	    else
+	        // The subcarrier frequency is fc/128
+	        adc_clk <= fc_div_8;
+	end
 
 // When we're a reader, we just need to do the BPSK demod; but when we're an
 // eavesdropper, we also need to pick out the commands sent by the reader,