mirror of
https://github.com/Proxmark/proxmark3.git
synced 2025-08-14 18:47:24 -07:00
Pushed standard AT91 defines into main code
This commit is contained in:
d18c7db
parent
5d32e2bf60
commit
6949aca9fa
16 changed files with 1368 additions and 1521 deletions
140
armsrc/lfops.c
140
armsrc/lfops.c
|
|
@ -42,12 +42,12 @@ void DoAcquisition125k(BOOL at134khz)
|
|||
memset(dest,0,n);
|
||||
i = 0;
|
||||
for(;;) {
|
||||
if(SSC_STATUS & (SSC_STATUS_TX_READY)) {
|
||||
SSC_TRANSMIT_HOLDING = 0x43;
|
||||
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
|
||||
AT91C_BASE_SSC->SSC_THR = 0x43;
|
||||
LED_D_ON();
|
||||
}
|
||||
if(SSC_STATUS & (SSC_STATUS_RX_READY)) {
|
||||
dest[i] = (BYTE)SSC_RECEIVE_HOLDING;
|
||||
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
|
||||
dest[i] = (BYTE)AT91C_BASE_SSC->SSC_RHR;
|
||||
i++;
|
||||
LED_D_OFF();
|
||||
if(i >= n) {
|
||||
|
|
@ -274,17 +274,17 @@ void WriteTIbyte(BYTE b)
|
|||
{
|
||||
if (b&(1<<i)) {
|
||||
// stop modulating antenna
|
||||
PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_SSC_DOUT);
|
||||
LOW(GPIO_SSC_DOUT);
|
||||
SpinDelayUs(1000);
|
||||
// modulate antenna
|
||||
PIO_OUTPUT_DATA_SET = (1<<GPIO_SSC_DOUT);
|
||||
HIGH(GPIO_SSC_DOUT);
|
||||
SpinDelayUs(1000);
|
||||
} else {
|
||||
// stop modulating antenna
|
||||
PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_SSC_DOUT);
|
||||
LOW(GPIO_SSC_DOUT);
|
||||
SpinDelayUs(300);
|
||||
// modulate antenna
|
||||
PIO_OUTPUT_DATA_SET = (1<<GPIO_SSC_DOUT);
|
||||
HIGH(GPIO_SSC_DOUT);
|
||||
SpinDelayUs(1700);
|
||||
}
|
||||
}
|
||||
|
|
@ -301,50 +301,50 @@ void AcquireTiType(void)
|
|||
memset(BigBuf,0,sizeof(BigBuf));
|
||||
|
||||
// Set up the synchronous serial port
|
||||
PIO_DISABLE = (1<<GPIO_SSC_DIN);
|
||||
PIO_PERIPHERAL_A_SEL = (1<<GPIO_SSC_DIN);
|
||||
AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DIN;
|
||||
AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN;
|
||||
|
||||
// steal this pin from the SSP and use it to control the modulation
|
||||
PIO_ENABLE = (1<<GPIO_SSC_DOUT);
|
||||
PIO_OUTPUT_ENABLE = (1<<GPIO_SSC_DOUT);
|
||||
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
|
||||
AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
|
||||
|
||||
SSC_CONTROL = SSC_CONTROL_RESET;
|
||||
SSC_CONTROL = SSC_CONTROL_RX_ENABLE | SSC_CONTROL_TX_ENABLE;
|
||||
AT91C_BASE_SSC->SSC_CR = AT91C_SSC_SWRST;
|
||||
AT91C_BASE_SSC->SSC_CR = AT91C_SSC_RXEN | AT91C_SSC_TXEN;
|
||||
|
||||
// Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long
|
||||
// 48/2 = 24 MHz clock must be divided by 12
|
||||
SSC_CLOCK_DIVISOR = 12;
|
||||
// Sample at 2 Mbit/s, so TI tags are 16.2 vs. 14.9 clocks long
|
||||
// 48/2 = 24 MHz clock must be divided by 12
|
||||
AT91C_BASE_SSC->SSC_CMR = 12;
|
||||
|
||||
SSC_RECEIVE_CLOCK_MODE = SSC_CLOCK_MODE_SELECT(0);
|
||||
SSC_RECEIVE_FRAME_MODE = SSC_FRAME_MODE_BITS_IN_WORD(32) | SSC_FRAME_MODE_MSB_FIRST;
|
||||
SSC_TRANSMIT_CLOCK_MODE = 0;
|
||||
SSC_TRANSMIT_FRAME_MODE = 0;
|
||||
AT91C_BASE_SSC->SSC_RCMR = SSC_CLOCK_MODE_SELECT(0);
|
||||
AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(32) | AT91C_SSC_MSBF;
|
||||
AT91C_BASE_SSC->SSC_TCMR = 0;
|
||||
AT91C_BASE_SSC->SSC_TFMR = 0;
|
||||
|
||||
LED_D_ON();
|
||||
|
||||
// modulate antenna
|
||||
PIO_OUTPUT_DATA_SET = (1<<GPIO_SSC_DOUT);
|
||||
HIGH(GPIO_SSC_DOUT);
|
||||
|
||||
// Charge TI tag for 50ms.
|
||||
SpinDelay(50);
|
||||
|
||||
// stop modulating antenna and listen
|
||||
PIO_OUTPUT_DATA_CLEAR = (1<<GPIO_SSC_DOUT);
|
||||
LOW(GPIO_SSC_DOUT);
|
||||
|
||||
LED_D_OFF();
|
||||
|
||||
i = 0;
|
||||
for(;;) {
|
||||
if(SSC_STATUS & SSC_STATUS_RX_READY) {
|
||||
BigBuf[i] = SSC_RECEIVE_HOLDING; // store 32 bit values in buffer
|
||||
i++; if(i >= TIBUFLEN) break;
|
||||
}
|
||||
WDT_HIT();
|
||||
if(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
|
||||
BigBuf[i] = AT91C_BASE_SSC->SSC_RHR; // store 32 bit values in buffer
|
||||
i++; if(i >= TIBUFLEN) break;
|
||||
}
|
||||
WDT_HIT();
|
||||
}
|
||||
|
||||
// return stolen pin to SSP
|
||||
PIO_DISABLE = (1<<GPIO_SSC_DOUT);
|
||||
PIO_PERIPHERAL_A_SEL = (1<<GPIO_SSC_DIN) | (1<<GPIO_SSC_DOUT);
|
||||
AT91C_BASE_PIOA->PIO_PDR = GPIO_SSC_DOUT;
|
||||
AT91C_BASE_PIOA->PIO_ASR = GPIO_SSC_DIN | GPIO_SSC_DOUT;
|
||||
|
||||
char *dest = (char *)BigBuf;
|
||||
n = TIBUFLEN*32;
|
||||
|
|
@ -394,8 +394,8 @@ void WriteTItag(DWORD idhi, DWORD idlo, WORD crc)
|
|||
LED_A_ON();
|
||||
|
||||
// steal this pin from the SSP and use it to control the modulation
|
||||
PIO_ENABLE = (1<<GPIO_SSC_DOUT);
|
||||
PIO_OUTPUT_ENABLE = (1<<GPIO_SSC_DOUT);
|
||||
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
|
||||
AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
|
||||
|
||||
// writing algorithm:
|
||||
// a high bit consists of a field off for 1ms and field on for 1ms
|
||||
|
|
@ -408,7 +408,7 @@ void WriteTItag(DWORD idhi, DWORD idlo, WORD crc)
|
|||
// finish with 15ms programming time
|
||||
|
||||
// modulate antenna
|
||||
PIO_OUTPUT_DATA_SET = (1<<GPIO_SSC_DOUT);
|
||||
HIGH(GPIO_SSC_DOUT);
|
||||
SpinDelay(50); // charge time
|
||||
|
||||
WriteTIbyte(0xbb); // keyword
|
||||
|
|
@ -425,7 +425,7 @@ void WriteTItag(DWORD idhi, DWORD idlo, WORD crc)
|
|||
WriteTIbyte( (crc>>8 )&0xff ); // crc hi
|
||||
WriteTIbyte(0x00); // write frame lo
|
||||
WriteTIbyte(0x03); // write frame hi
|
||||
PIO_OUTPUT_DATA_SET = (1<<GPIO_SSC_DOUT);
|
||||
HIGH(GPIO_SSC_DOUT);
|
||||
SpinDelay(50); // programming time
|
||||
|
||||
LED_A_OFF();
|
||||
|
|
@ -444,17 +444,17 @@ void SimulateTagLowFrequency(int period, int ledcontrol)
|
|||
|
||||
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_SIMULATOR);
|
||||
|
||||
PIO_ENABLE = (1 << GPIO_SSC_DOUT) | (1 << GPIO_SSC_CLK);
|
||||
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT | GPIO_SSC_CLK;
|
||||
|
||||
PIO_OUTPUT_ENABLE = (1 << GPIO_SSC_DOUT);
|
||||
PIO_OUTPUT_DISABLE = (1 << GPIO_SSC_CLK);
|
||||
AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
|
||||
AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_CLK;
|
||||
|
||||
#define SHORT_COIL() LOW(GPIO_SSC_DOUT)
|
||||
#define OPEN_COIL() HIGH(GPIO_SSC_DOUT)
|
||||
#define OPEN_COIL() HIGH(GPIO_SSC_DOUT)
|
||||
|
||||
i = 0;
|
||||
for(;;) {
|
||||
while(!(PIO_PIN_DATA_STATUS & (1<<GPIO_SSC_CLK))) {
|
||||
while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
|
||||
if(BUTTON_PRESS()) {
|
||||
DbpString("Stopped");
|
||||
return;
|
||||
|
|
@ -473,7 +473,7 @@ void SimulateTagLowFrequency(int period, int ledcontrol)
|
|||
if (ledcontrol)
|
||||
LED_D_OFF();
|
||||
|
||||
while(PIO_PIN_DATA_STATUS & (1<<GPIO_SSC_CLK)) {
|
||||
while(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK) {
|
||||
if(BUTTON_PRESS()) {
|
||||
DbpString("Stopped");
|
||||
return;
|
||||
|
|
@ -529,7 +529,7 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0)
|
|||
hitag2_init();
|
||||
|
||||
/* Set up simulator mode, frequency divisor which will drive the FPGA
|
||||
* and analog mux selection.
|
||||
* and analog mux selection.
|
||||
*/
|
||||
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_SIMULATOR);
|
||||
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, divisor);
|
||||
|
|
@ -539,15 +539,19 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0)
|
|||
/* Set up Timer 1:
|
||||
* Capture mode, timer source MCK/2 (TIMER_CLOCK1), TIOA is external trigger,
|
||||
* external trigger rising edge, load RA on rising edge of TIOA, load RB on rising
|
||||
* edge of TIOA. Assign PA15 to TIOA1 (peripheral B)
|
||||
* edge of TIOA. Assign PA15 to TIOA1 (peripheral B)
|
||||
*/
|
||||
|
||||
PMC_PERIPHERAL_CLK_ENABLE = (1 << PERIPH_TC1);
|
||||
PIO_PERIPHERAL_B_SEL = (1 << GPIO_SSC_FRAME);
|
||||
TC1_CCR = TC_CCR_CLKDIS;
|
||||
TC1_CMR = TC_CMR_TCCLKS_TIMER_CLOCK1 | TC_CMR_ETRGEDG_RISING | TC_CMR_ABETRG |
|
||||
TC_CMR_LDRA_RISING | TC_CMR_LDRB_RISING;
|
||||
TC1_CCR = TC_CCR_CLKEN | TC_CCR_SWTRG;
|
||||
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
|
||||
AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME;
|
||||
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
|
||||
AT91C_BASE_TC1->TC_CMR = TC_CMR_TCCLKS_TIMER_CLOCK1 |
|
||||
AT91C_TC_ETRGEDG_RISING |
|
||||
AT91C_TC_ABETRG |
|
||||
AT91C_TC_LDRA_RISING |
|
||||
AT91C_TC_LDRB_RISING;
|
||||
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN |
|
||||
AT91C_TC_SWTRG;
|
||||
|
||||
/* calculate the new value for the carrier period in terms of TC1 values */
|
||||
t0 = t0/2;
|
||||
|
|
@ -555,8 +559,8 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0)
|
|||
int overflow = 0;
|
||||
while(!BUTTON_PRESS()) {
|
||||
WDT_HIT();
|
||||
if(TC1_SR & TC_SR_LDRAS) {
|
||||
int ra = TC1_RA;
|
||||
if(AT91C_BASE_TC1->TC_SR & AT91C_TC_LDRAS) {
|
||||
int ra = AT91C_BASE_TC1->TC_RA;
|
||||
if((ra > t0*HITAG_T_EOF) | overflow) ra = t0*HITAG_T_EOF+1;
|
||||
#if DEBUG_RA_VALUES
|
||||
if(ra > 255 || overflow) ra = 255;
|
||||
|
|
@ -583,14 +587,14 @@ void SimulateTagLowFrequencyBidir(int divisor, int t0)
|
|||
overflow = 0;
|
||||
LED_D_ON();
|
||||
} else {
|
||||
if(TC1_CV > t0*HITAG_T_EOF) {
|
||||
if(AT91C_BASE_TC1->TC_CV > t0*HITAG_T_EOF) {
|
||||
/* Minor nuisance: In Capture mode, the timer can not be
|
||||
* stopped by a Compare C. There's no way to stop the clock
|
||||
* in software, so we'll just have to note the fact that an
|
||||
* overflow happened and the next loaded timer value might
|
||||
* have wrapped. Also, this marks the end of frame, and the
|
||||
* still running counter can be used to determine the correct
|
||||
* time for the start of the reply.
|
||||
* time for the start of the reply.
|
||||
*/
|
||||
overflow = 1;
|
||||
|
||||
|
|
@ -619,37 +623,37 @@ static void hitag_send_bit(int t0, int bit) {
|
|||
/* Manchester: Loaded, then unloaded */
|
||||
LED_A_ON();
|
||||
SHORT_COIL();
|
||||
while(TC1_CV < t0*15);
|
||||
while(AT91C_BASE_TC1->TC_CV < t0*15);
|
||||
OPEN_COIL();
|
||||
while(TC1_CV < t0*31);
|
||||
while(AT91C_BASE_TC1->TC_CV < t0*31);
|
||||
LED_A_OFF();
|
||||
} else if(bit == 0) {
|
||||
/* Manchester: Unloaded, then loaded */
|
||||
LED_B_ON();
|
||||
OPEN_COIL();
|
||||
while(TC1_CV < t0*15);
|
||||
while(AT91C_BASE_TC1->TC_CV < t0*15);
|
||||
SHORT_COIL();
|
||||
while(TC1_CV < t0*31);
|
||||
while(AT91C_BASE_TC1->TC_CV < t0*31);
|
||||
LED_B_OFF();
|
||||
}
|
||||
TC1_CCR = TC_CCR_SWTRG; /* Reset clock for the next bit */
|
||||
AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG; /* Reset clock for the next bit */
|
||||
|
||||
}
|
||||
static void hitag_send_frame(int t0, int frame_len, const char const * frame, int fdt)
|
||||
{
|
||||
OPEN_COIL();
|
||||
PIO_OUTPUT_ENABLE = (1 << GPIO_SSC_DOUT);
|
||||
AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
|
||||
|
||||
/* Wait for HITAG_T_WRESP carrier periods after the last reader bit,
|
||||
* not that since the clock counts since the rising edge, but T_wresp is
|
||||
* with respect to the falling edge, we need to wait actually (T_wresp - T_g)
|
||||
* periods. The gap time T_g varies (4..10).
|
||||
* periods. The gap time T_g varies (4..10).
|
||||
*/
|
||||
while(TC1_CV < t0*(fdt-8));
|
||||
while(AT91C_BASE_TC1->TC_CV < t0*(fdt-8));
|
||||
|
||||
int saved_cmr = TC1_CMR;
|
||||
TC1_CMR &= ~TC_CMR_ETRGEDG; /* Disable external trigger for the clock */
|
||||
TC1_CCR = TC_CCR_SWTRG; /* Reset the clock and use it for response timing */
|
||||
int saved_cmr = AT91C_BASE_TC1->TC_CMR;
|
||||
AT91C_BASE_TC1->TC_CMR &= ~AT91C_TC_ETRGEDG; /* Disable external trigger for the clock */
|
||||
AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG; /* Reset the clock and use it for response timing */
|
||||
|
||||
int i;
|
||||
for(i=0; i<5; i++)
|
||||
|
|
@ -660,7 +664,7 @@ static void hitag_send_frame(int t0, int frame_len, const char const * frame, in
|
|||
}
|
||||
|
||||
OPEN_COIL();
|
||||
TC1_CMR = saved_cmr;
|
||||
AT91C_BASE_TC1->TC_CMR = saved_cmr;
|
||||
}
|
||||
|
||||
/* Callback structure to cleanly separate tag emulation code from the radio layer. */
|
||||
|
|
@ -813,13 +817,13 @@ void CmdHIDdemodFSK(int findone, int *high, int *low, int ledcontrol)
|
|||
m = sizeof(BigBuf);
|
||||
memset(dest,128,m);
|
||||
for(;;) {
|
||||
if(SSC_STATUS & (SSC_STATUS_TX_READY)) {
|
||||
SSC_TRANSMIT_HOLDING = 0x43;
|
||||
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
|
||||
AT91C_BASE_SSC->SSC_THR = 0x43;
|
||||
if (ledcontrol)
|
||||
LED_D_ON();
|
||||
}
|
||||
if(SSC_STATUS & (SSC_STATUS_RX_READY)) {
|
||||
dest[i] = (BYTE)SSC_RECEIVE_HOLDING;
|
||||
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
|
||||
dest[i] = (BYTE)AT91C_BASE_SSC->SSC_RHR;
|
||||
// we don't care about actual value, only if it's more or less than a
|
||||
// threshold essentially we capture zero crossings for later analysis
|
||||
if(dest[i] < 127) dest[i] = 0; else dest[i] = 1;
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue