Merge pull request #131 from holiman/master

Fixes to PR #129

armsrc/appmain.c

@@ -667,6 +667,7 @@ void UsbPacketReceived(uint8_t *packet, int len)
 			break;
 		case CMD_T55XX_WRITE_BLOCK:
 			T55xxWriteBlock(c->arg[0], c->arg[1], c->arg[2], c->d.asBytes[0]);
+			cmd_send(CMD_ACK,0,0,0,0,0);
 			break;
 		case CMD_T55XX_READ_TRACE:
 			T55xxReadTrace();

armsrc/lfops.c

@@ -399,14 +399,10 @@ void SimulateTagLowFrequency(int period, int gap, int ledcontrol)
  #define OPEN_COIL()		HIGH(GPIO_SSC_DOUT)
 
 	i = 0;
-	byte_t rx[sizeof(UsbCommand)]; // Storage for usb_read call in loop
 	for(;;) {
 		//wait until SSC_CLK goes HIGH
 		while(!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_CLK)) {
-			// Craig Young - Adding a usb_read() here to avoid abort on empty UsbCommand
+			if(BUTTON_PRESS() || (usb_poll_validate_length() )) {
-			// My OS X client does this preventing simulation.
-			// Performance hit should be non-existent since the read is only performed if usb_poll is true
-			if(BUTTON_PRESS() || (usb_poll() && usb_read(rx,sizeof(UsbCommand)))) {
 				DbpString("Stopped");
 				return;
 			}

client/cmdhw.c

@@ -406,16 +406,10 @@ int CmdVersion(const char *Cmd)
 {
 
 	UsbCommand c = {CMD_VERSION};
-	static UsbCommand resp = {0, {0, 0, 0}};
+	UsbCommand resp = {0, {0, 0, 0}};
 
-	if (resp.arg[0] == 0 && resp.arg[1] == 0) { // no cached information available
 	SendCommand(&c);
-		if (WaitForResponseTimeout(CMD_ACK,&resp,1000) && Cmd != NULL) {
+	if (WaitForResponseTimeout(CMD_ACK,&resp,1000)) {
-			PrintAndLog("Prox/RFID mark3 RFID instrument");
-			PrintAndLog((char*)resp.d.asBytes);
-			lookupChipID(resp.arg[0], resp.arg[1]);
-		}
-	} else if (Cmd != NULL) {
 		PrintAndLog("Prox/RFID mark3 RFID instrument");
 		PrintAndLog((char*)resp.d.asBytes);
 		lookupChipID(resp.arg[0], resp.arg[1]);

client/cmdlfawid.c

@@ -16,7 +16,7 @@
 #include "cmdparser.h"  // CmdsParse, CmdsHelp
 #include "cmdlfawid.h"  // AWID function declarations
 #include "lfdemod.h"    // parityTest
-
+#include "cmdmain.h"
 static int CmdHelp(const char *Cmd);
 
 
@@ -176,8 +176,7 @@ int CmdAWIDClone(const char *Cmd)
 	uint32_t fc=0,cn=0,blocks[4] = {0x00107060, 0, 0, 0x11111111}, i=0;
 	uint8_t BitStream[12];
 	uint8_t *BS=BitStream;
-  UsbCommand c;
+	UsbCommand c, resp;
-  
 
 	if (sscanf(Cmd, "%u %u", &fc, &cn ) != 2) {
 		return usage_lf_awid_clone();
@@ -206,6 +205,11 @@ int CmdAWIDClone(const char *Cmd)
 			c.arg[1] = i;
 			c.arg[2] = 0;
 			SendCommand(&c);
+			if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){
+				PrintAndLog("Error occurred, device did not respond during write operation.");
+				return -1;
+			}
+
 		}
 	}
 	return 0;

client/cmdlft55xx.c

@@ -242,6 +242,7 @@ int CmdT55xxReadBlock(const char *Cmd) {
 		c.d.asBytes[0] = 0x1; 
 	}
 
+	clearCommandBuffer();
 	SendCommand(&c);
 	if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {
 		PrintAndLog("command execution time out");
@@ -670,6 +671,7 @@ int CmdT55xxWriteBlock(const char *Cmd)
 	}
 	
 	UsbCommand c = {CMD_T55XX_WRITE_BLOCK, {data, block, 0}};
+	UsbCommand resp;
  	c.d.asBytes[0] = 0x0; 
 
 	PrintAndLog("Writing to block: %d  data  : 0x%08X", block, data);
@@ -680,7 +682,12 @@ int CmdT55xxWriteBlock(const char *Cmd)
 		c.d.asBytes[0] = 0x1; 
 		PrintAndLog("pwd   : 0x%08X", password);
 	}
+	clearCommandBuffer();
 	SendCommand(&c);
+	if (!WaitForResponseTimeout(CMD_ACK, &resp, 1000)){
+		PrintAndLog("Error occurred, device did not ACK write operation. (May be due to old firmware)");
+		return -1;
+	}
 	return 0;
 }
 
@@ -878,6 +885,7 @@ int AquireData( uint8_t block ){
 		// c.d.asBytes[0] = 0x1; 
 	// }
 
+	clearCommandBuffer();
 	SendCommand(&c);
 	if ( !WaitForResponseTimeout(CMD_ACK,NULL,2500) ) {
 		PrintAndLog("command execution time out");

common/usb_cdc.c

@@ -293,6 +293,22 @@ bool usb_poll()
   return (pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank);
 }
 
+/**
+	In github PR #129, some users appears to get a false positive from
+	usb_poll, which returns true, but the usb_read operation
+	still returns 0.
+	This check is basically the same as above, but also checks
+	that the length available to read is non-zero, thus hopefully fixes the
+	bug.
+**/
+bool usb_poll_validate_length()
+{
+
+	if (!usb_check()) return false;
+	if (!(pUdp->UDP_CSR[AT91C_EP_OUT] & btReceiveBank)) return false;
+	return (pUdp->UDP_CSR[AT91C_EP_OUT] >> 16) >  0;
+}
+
 //*----------------------------------------------------------------------------
 //* \fn    usb_read
 //* \brief Read available data from Endpoint OUT

common/usb_cdc.h

@@ -41,6 +41,7 @@ void usb_disable();
 void usb_enable();
 bool usb_check();
 bool usb_poll();
+bool usb_poll_validate_length();
 uint32_t usb_read(byte_t* data, size_t len);
 uint32_t usb_write(const byte_t* data, const size_t len);