- fix: ensure that FpgaDownloadAndGo() is always called before requesting

any memory from BigBuf[]. This is required because FpgaDownloadAndGo() might
  allocate, use, and free most of BigBuf[] when decompressing FPGA configs.
- cleanup: remove rests of deprecated "end of trace markers" (0x44)

armsrc/BigBuf.c

@@ -96,9 +96,6 @@ uint16_t BigBuf_max_traceLen(void)
 }
 
 void clear_trace() {
-	uint8_t *trace = BigBuf_get_addr();
-	uint16_t max_traceLen = BigBuf_max_traceLen();
-	memset(trace, 0x44, max_traceLen);
 	traceLen = 0;
 }
 
@@ -176,13 +173,10 @@ bool RAMFUNC LogTrace(const uint8_t *btBytes, uint16_t iLen, uint32_t timestamp_
 	}
 	traceLen += num_paritybytes;
 
-	if(traceLen +4 < max_traceLen)
-	{	//If it hadn't been cleared, for whatever reason..
-		memset(trace+traceLen,0x44, 4);
-	}
-
 	return TRUE;
 }
+
+
 int LogTraceHitag(const uint8_t * btBytes, int iBits, int iSamples, uint32_t dwParity, int readerToTag)
 {
 	/**

armsrc/hitag2.c

@@ -710,22 +710,24 @@ void SnoopHitag(uint32_t type) {
 	byte_t rx[HITAG_FRAME_LEN];
 	size_t rxlen=0;
 	
-	auth_table_len = 0;
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
-	auth_table_pos = 0;
-	BigBuf_free();
-    auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
-	memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
 
 	// Clean up trace and prepare it for storing frames
 	set_tracing(TRUE);
 	clear_trace();
 	
+	auth_table_len = 0;
+	auth_table_pos = 0;
+
+	BigBuf_free();
+    auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
+	memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
+
 	DbpString("Starting Hitag2 snoop");
 	LED_D_ON();
 	
 	// Set up eavesdropping mode, frequency divisor which will drive the FPGA
 	// and analog mux selection.
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT  | FPGA_LF_EDGE_DETECT_TOGGLE_MODE);
 	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
 	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
@@ -922,6 +924,12 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
 	bool bQuitTraceFull = false;
 	bQuiet = false;
 	
+	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
+
+	// Clean up trace and prepare it for storing frames
+	set_tracing(TRUE);
+	clear_trace();
+
 	auth_table_len = 0;
 	auth_table_pos = 0;
     byte_t* auth_table;
@@ -929,10 +937,6 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
     auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
 	memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
 
-	// Clean up trace and prepare it for storing frames
-	set_tracing(TRUE);
-	clear_trace();
-
 	DbpString("Starting Hitag2 simulation");
 	LED_D_ON();
 	hitag2_init();
@@ -953,7 +957,6 @@ void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
 	
 	// Set up simulator mode, frequency divisor which will drive the FPGA
 	// and analog mux selection.
-	FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
 	FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
 	SetAdcMuxFor(GPIO_MUXSEL_LOPKD);

armsrc/iclass.c

@@ -1125,7 +1125,6 @@ int doIClassSimulation( int simulationMode, uint8_t *reader_mac_buf)
 	int resp_cc_len;
 
 	uint8_t *receivedCmd = BigBuf_malloc(MAX_FRAME_SIZE);
-	memset(receivedCmd, 0x44, MAX_FRAME_SIZE);
 	int len;
 
 	// Prepare card messages
@@ -1336,7 +1335,6 @@ int doIClassSimulation( int simulationMode, uint8_t *reader_mac_buf)
 			}
 
 		}
-		memset(receivedCmd, 0x44, MAX_FRAME_SIZE);
 	}
 
 	//Dbprintf("%x", cmdsRecvd);

armsrc/iso14443a.c

@@ -551,12 +551,8 @@ void RAMFUNC SnoopIso14443a(uint8_t param) {
 	
 	LEDsoff();
 
-	// We won't start recording the frames that we acquire until we trigger;
+	iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
-	// a good trigger condition to get started is probably when we see a
+
-	// response from the tag.
-	// triggered == FALSE -- to wait first for card
-	bool triggered = !(param & 0x03); 
-	
 	// Allocate memory from BigBuf for some buffers
 	// free all previous allocations first
 	BigBuf_free();
@@ -583,8 +579,6 @@ void RAMFUNC SnoopIso14443a(uint8_t param) {
 	bool TagIsActive = FALSE;
 	bool ReaderIsActive = FALSE;
 	
-	iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
-
 	// Set up the demodulator for tag -> reader responses.
 	DemodInit(receivedResponse, receivedResponsePar);
 	
@@ -594,6 +588,12 @@ void RAMFUNC SnoopIso14443a(uint8_t param) {
 	// Setup and start DMA.
 	FpgaSetupSscDma((uint8_t *)dmaBuf, DMA_BUFFER_SIZE);
 	
+	// We won't start recording the frames that we acquire until we trigger;
+	// a good trigger condition to get started is probably when we see a
+	// response from the tag.
+	// triggered == FALSE -- to wait first for card
+	bool triggered = !(param & 0x03); 
+	
 	// And now we loop, receiving samples.
 	for(uint32_t rsamples = 0; TRUE; ) {
 
@@ -1026,6 +1026,9 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data)
 		.modulation_n = 0
 	};
   
+	// We need to listen to the high-frequency, peak-detected path.
+	iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
+
 	BigBuf_free_keep_EM();
 
 	// allocate buffers:
@@ -1054,9 +1057,6 @@ void SimulateIso14443aTag(int tagType, int uid_1st, int uid_2nd, byte_t* data)
 	int happened2 = 0;
 	int cmdsRecvd = 0;
 
-	// We need to listen to the high-frequency, peak-detected path.
-	iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
-
 	cmdsRecvd = 0;
 	tag_response_info_t* p_response;
 
@@ -1994,6 +1994,10 @@ void ReaderMifare(bool first_try)
 	uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE];
 	uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE];
 
+	if (first_try) { 
+		iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
+	}
+	
 	// free eventually allocated BigBuf memory. We want all for tracing.
 	BigBuf_free();
 	
@@ -2022,7 +2026,6 @@ void ReaderMifare(bool first_try)
 
 	if (first_try) { 
 		mf_nr_ar3 = 0;
-		iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
 		sync_time = GetCountSspClk() & 0xfffffff8;
 		sync_cycles = 65536;									// theory: Mifare Classic's random generator repeats every 2^16 cycles (and so do the nonces).
 		nt_attacked = 0;
@@ -2239,13 +2242,6 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 	uint32_t ar_nr_responses[] = {0,0,0,0,0,0,0,0};
 	uint8_t ar_nr_collected = 0;
 
-	// free eventually allocated BigBuf memory but keep Emulator Memory
-	BigBuf_free_keep_EM();
-
-	// clear trace
-	clear_trace();
-	set_tracing(TRUE);
-
 	// Authenticate response - nonce
 	uint32_t nonce = bytes_to_num(rAUTH_NT, 4);
 	
@@ -2287,10 +2283,6 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 		rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3];
 	}
 
-	// We need to listen to the high-frequency, peak-detected path.
-	iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
-
-
 	if (MF_DBGLEVEL >= 1)	{
 		if (!_7BUID) {
 			Dbprintf("4B UID: %02x%02x%02x%02x", 
@@ -2302,6 +2294,17 @@ void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *
 		}
 	}
 
+	// We need to listen to the high-frequency, peak-detected path.
+	iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
+
+	// free eventually allocated BigBuf memory but keep Emulator Memory
+	BigBuf_free_keep_EM();
+
+	// clear trace
+	clear_trace();
+	set_tracing(TRUE);
+
+
 	bool finished = FALSE;
 	while (!BUTTON_PRESS() && !finished) {
 		WDT_HIT();
@@ -2720,10 +2723,8 @@ void RAMFUNC SniffMifare(uint8_t param) {
 	uint8_t receivedResponse[MAX_MIFARE_FRAME_SIZE];
 	uint8_t receivedResponsePar[MAX_MIFARE_PARITY_SIZE];
 
-	// As we receive stuff, we copy it from receivedCmd or receivedResponse
+	iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
-	// into trace, along with its length and other annotations.
+
-	//uint8_t *trace = (uint8_t *)BigBuf;
-	
 	// free eventually allocated BigBuf memory
 	BigBuf_free();
 	// allocate the DMA buffer, used to stream samples from the FPGA
@@ -2735,8 +2736,6 @@ void RAMFUNC SniffMifare(uint8_t param) {
 	bool ReaderIsActive = FALSE;
 	bool TagIsActive = FALSE;
 
-	iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
-
 	// Set up the demodulator for tag -> reader responses.
 	DemodInit(receivedResponse, receivedResponsePar);
 

armsrc/iso14443b.c

@@ -334,6 +334,8 @@ void SimulateIso14443bTag(void)
 		0x00, 0x21, 0x85, 0x5e, 0xd7
 	};
 
+	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
+
 	clear_trace();
 	set_tracing(TRUE);
 
@@ -348,8 +350,6 @@ void SimulateIso14443bTag(void)
 	uint16_t len;
 	uint16_t cmdsRecvd = 0;
 
-	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
-
 	// prepare the (only one) tag answer:
 	CodeIso14443bAsTag(response1, sizeof(response1));
 	uint8_t *resp1Code = BigBuf_malloc(ToSendMax);
@@ -908,9 +908,6 @@ static void CodeAndTransmit14443bAsReader(const uint8_t *cmd, int len)
 //-----------------------------------------------------------------------------
 void ReadSTMemoryIso14443b(uint32_t dwLast)
 {
-	clear_trace();
-	set_tracing(TRUE);
-
 	uint8_t i = 0x00;
 
 	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
@@ -929,6 +926,9 @@ void ReadSTMemoryIso14443b(uint32_t dwLast)
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_848_KHZ);
 	SpinDelay(200);
 
+	clear_trace();
+	set_tracing(TRUE);
+
 	// First command: wake up the tag using the INITIATE command
 	uint8_t cmd1[] = {0x06, 0x00, 0x97, 0x5b};
 	CodeAndTransmit14443bAsReader(cmd1, sizeof(cmd1));

armsrc/iso15693.c

@@ -877,12 +877,12 @@ int SendDataTag(uint8_t *send, int sendlen, int init, int speed, uint8_t **recv)
 	LED_C_OFF();
 	LED_D_OFF();
 	
+	if (init) Iso15693InitReader();
+
 	int answerLen=0;
 	uint8_t *answer = BigBuf_get_addr() + 3660;
 	if (recv != NULL) memset(answer, 0, 100);
 
-	if (init) Iso15693InitReader();
-	
 	if (!speed) {
 		// low speed (1 out of 256)
 		CodeIso15693AsReader256(send, sendlen);
@@ -999,10 +999,6 @@ void ReaderIso15693(uint32_t parameter)
 	LED_C_OFF();
 	LED_D_OFF();
 
-	uint8_t *answer1 = BigBuf_get_addr() + 3660;
-	uint8_t *answer2 = BigBuf_get_addr() + 3760;
-	uint8_t *answer3 = BigBuf_get_addr() + 3860;
-
 	int answerLen1 = 0;
 	int answerLen2 = 0;
 	int answerLen3 = 0;
@@ -1013,19 +1009,21 @@ void ReaderIso15693(uint32_t parameter)
 	int elapsed = 0;
 	uint8_t TagUID[8] = {0x00};
 
+	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 
+	uint8_t *answer1 = BigBuf_get_addr() + 3660;
+	uint8_t *answer2 = BigBuf_get_addr() + 3760;
+	uint8_t *answer3 = BigBuf_get_addr() + 3860;
 	// Blank arrays
 	memset(answer1, 0x00, 300);
 
-	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
-
 	SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
 	// Setup SSC
 	FpgaSetupSsc();
 
 	// Start from off (no field generated)
-    	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+   	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
-    	SpinDelay(200);
+   	SpinDelay(200);
 
 	// Give the tags time to energize
 	FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR);
@@ -1111,24 +1109,22 @@ void SimTagIso15693(uint32_t parameter, uint8_t *uid)
 	LED_C_OFF();
 	LED_D_OFF();
 
-	uint8_t *buf = BigBuf_get_addr() + 3660;
-	
 	int answerLen1 = 0;
 	int samples = 0;
 	int tsamples = 0;
 	int wait = 0;
 	int elapsed = 0;
 
-	memset(buf, 0x00, 100);
-
 	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 
+	uint8_t *buf = BigBuf_get_addr() + 3660;
+	memset(buf, 0x00, 100);
+	
 	SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
-
 	FpgaSetupSsc();
 
 	// Start from off (no field generated)
-    	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
+   	FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
 	SpinDelay(200);
 
 	LED_A_OFF();

armsrc/mifarecmd.c

@@ -44,10 +44,10 @@ void MifareReadBlock(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 	struct Crypto1State *pcs;
 	pcs = &mpcs;
 
-	// clear trace
-	clear_trace();
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
+	clear_trace();
+
 	LED_A_ON();
 	LED_B_OFF();
 	LED_C_OFF();
@@ -95,9 +95,11 @@ void MifareUC_Auth(uint8_t arg0, uint8_t *keybytes){
 	bool turnOffField = (arg0 == 1);
 
 	LED_A_ON(); LED_B_OFF(); LED_C_OFF();
-	clear_trace();
+
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
+	clear_trace();
+
 	if(!iso14443a_select_card(NULL, NULL, NULL)) {
 		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card");
 		OnError(0);
@@ -129,9 +131,10 @@ void MifareUReadBlock(uint8_t arg0, uint8_t arg1, uint8_t *datain)
 
 	LEDsoff();
 	LED_A_ON();
-	clear_trace();
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
+	clear_trace();
+
 	int len = iso14443a_select_card(NULL, NULL, NULL);
 	if(!len) {
 		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card (RC:%02X)",len);
@@ -199,11 +202,10 @@ void MifareReadSector(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 	struct Crypto1State *pcs;
 	pcs = &mpcs;
 
-	// clear trace
-	clear_trace();
-
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
+	clear_trace();
+
 	LED_A_ON();
 	LED_B_OFF();
 	LED_C_OFF();
@@ -252,6 +254,10 @@ void MifareReadSector(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 // datain = KEY bytes
 void MifareUReadCard(uint8_t arg0, uint16_t arg1, uint8_t arg2, uint8_t *datain)
 {
+	LEDsoff();
+	LED_A_ON();
+	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+
 	// free eventually allocated BigBuf memory
 	BigBuf_free();
 	clear_trace();
@@ -269,10 +275,6 @@ void MifareUReadCard(uint8_t arg0, uint16_t arg1, uint8_t arg2, uint8_t *datain)
 		return;
 	}
 
-	LEDsoff();
-	LED_A_ON();
-	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
-
 	int len = iso14443a_select_card(NULL, NULL, NULL);
 	if (!len) {
 		if (MF_DBGLEVEL >= MF_DBG_ERROR) Dbprintf("Can't select card (RC:%d)",len);
@@ -366,11 +368,10 @@ void MifareWriteBlock(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 	struct Crypto1State *pcs;
 	pcs = &mpcs;
 
-	// clear trace
-	clear_trace();
-
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
+	clear_trace();
+
 	LED_A_ON();
 	LED_B_OFF();
 	LED_C_OFF();
@@ -472,9 +473,10 @@ void MifareUWriteBlock(uint8_t arg0, uint8_t arg1, uint8_t *datain)
 	
 	LEDsoff();
 	LED_A_ON();
-	clear_trace();
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
+	clear_trace();
+
 	if(!iso14443a_select_card(NULL, NULL, NULL)) {
 		if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");
 		OnError(0);
@@ -530,9 +532,10 @@ void MifareUSetPwd(uint8_t arg0, uint8_t *datain){
 	memcpy(pwd, datain, 16);
 	
 	LED_A_ON(); LED_B_OFF(); LED_C_OFF();
-	clear_trace();
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 
+	clear_trace();
+
 	if(!iso14443a_select_card(NULL, NULL, NULL)) {
 		if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");
 		OnError(0);
@@ -632,18 +635,16 @@ void MifareNested(uint32_t arg0, uint32_t arg1, uint32_t calibrate, uint8_t *dat
 	uint32_t auth1_time, auth2_time;
 	static uint16_t delta_time;
 
+	LED_A_ON();
+	LED_C_OFF();
+	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+
 	// free eventually allocated BigBuf memory
 	BigBuf_free();
-	// clear trace
+
 	clear_trace();
 	set_tracing(false);
 	
-	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
-
-	LED_A_ON();
-	LED_C_OFF();
-
-
 	// statistics on nonce distance
 	int16_t isOK = 0;
 	#define NESTED_MAX_TRIES 12
@@ -847,15 +848,13 @@ void MifareChkKeys(uint8_t arg0, uint8_t arg1, uint8_t arg2, uint8_t *datain)
 	int OLD_MF_DBGLEVEL = MF_DBGLEVEL;	
 	MF_DBGLEVEL = MF_DBG_NONE;
 	
-	// clear trace
-	clear_trace();
-	set_tracing(TRUE);
-
-	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
-
 	LED_A_ON();
 	LED_B_OFF();
 	LED_C_OFF();
+	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+
+	clear_trace();
+	set_tracing(TRUE);
 
 	for (i = 0; i < keyCount; i++) {
 		if(mifare_classic_halt(pcs, cuid)) {
@@ -902,16 +901,23 @@ void MifareSetDbgLvl(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
 //-----------------------------------------------------------------------------
 // Work with emulator memory
 // 
+// Note: we call FpgaDownloadAndGo(FPGA_BITSTREAM_HF) here although FPGA is not
+// involved in dealing with emulator memory. But if it is called later, it might
+// destroy the Emulator Memory.
 //-----------------------------------------------------------------------------
+
 void MifareEMemClr(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){
+	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 	emlClearMem();
 }
 
 void MifareEMemSet(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){
+	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 	emlSetMem(datain, arg0, arg1); // data, block num, blocks count
 }
 
 void MifareEMemGet(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datain){
+	FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
 	byte_t buf[USB_CMD_DATA_SIZE];
 	emlGetMem(buf, arg0, arg1); // data, block num, blocks count (max 4)
 
@@ -938,15 +944,13 @@ void MifareECardLoad(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
 	byte_t dataoutbuf2[16];
 	uint8_t uid[10];
 
-	// clear trace
-	clear_trace();
-	set_tracing(false);
-	
-	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
-
 	LED_A_ON();
 	LED_B_OFF();
 	LED_C_OFF();
+	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+	
+	clear_trace();
+	set_tracing(false);
 	
 	bool isOK = true;
 
@@ -1040,10 +1044,10 @@ void MifareCSetBlock(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
 		LED_A_ON();
 		LED_B_OFF();
 		LED_C_OFF();
+		iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 	
 		clear_trace();
 		set_tracing(TRUE);
-		iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 	}
 
 	while (true) {
@@ -1158,10 +1162,10 @@ void MifareCGetBlock(uint32_t arg0, uint32_t arg1, uint32_t arg2, uint8_t *datai
 		LED_A_ON();
 		LED_B_OFF();
 		LED_C_OFF();
-	
+		iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+
 		clear_trace();
 		set_tracing(TRUE);
-		iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
 	}
 
 	while (true) {
@@ -1236,7 +1240,7 @@ void MifareCIdent(){
 	cmd_send(CMD_ACK,isOK,0,0,0,0);
 }
 
-			//
+//
 // DESFIRE
 //
 
@@ -1246,8 +1250,8 @@ void Mifare_DES_Auth1(uint8_t arg0, uint8_t *datain){
 	uint8_t uid[10] = {0x00};
 	uint32_t cuid;
     
-	clear_trace();
 	iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
+	clear_trace();
 
 	int len = iso14443a_select_card(uid, NULL, &cuid);
 	if(!len) {