Add back init scripts

Update cherrypy to 3.8.0
Remove unnecessary includes
Remove old references to Headphones

.gitignore

@@ -6,7 +6,7 @@
 *.pyproj
 *.sln
 
-# Headphones files #
+# PlexPy files #
 ######################
 *.log
 *.db*

init-scripts/init-alt.freebsd

@@ -0,0 +1,88 @@
+#!/bin/sh
+#
+# PROVIDE: plexpy
+# REQUIRE: sabnzbd
+# KEYWORD: shutdown
+#
+# Add the following lines to /etc/rc.conf.local or /etc/rc.conf
+# to enable this service:
+#
+# plexpy_enable (bool):     Set to NO by default.
+#                       Set it to YES to enable it.
+# plexpy_user:  The user account PlexPy daemon runs as what
+#                       you want it to be. It uses '_sabnzbd' user by
+#                       default. Do not sets it as empty or it will run
+#                       as root.
+# plexpy_dir:       Directory where PlexPy lives.
+#                       Default: /usr/local/plexpy
+# plexpy_chdir:  Change to this directory before running PlexPy.
+#     Default is same as plexpy_dir.
+# plexpy_pid:  The name of the pidfile to create.
+#     Default is plexpy.pid in plexpy_dir.
+
+. /etc/rc.subr
+
+name="plexpy"
+rcvar=${name}_enable
+
+load_rc_config ${name}
+
+: ${plexpy_enable:="NO"}
+: ${plexpy_user:="_sabnzbd"}
+: ${plexpy_dir:="/usr/local/plexpy"}
+: ${plexpy_chdir:="${plexpy_dir}"}
+: ${plexpy_pid:="${plexpy_dir}/plexpy.pid"}
+: ${plexpy_conf:="${plexpy_dir}/config.ini"}
+
+WGET="/usr/local/bin/wget" # You need wget for this script to safely shutdown PlexPy.
+if [ -e "${plexpy_conf}" ]; then
+        HOST=`grep -A64 "\[General\]" "${plexpy_conf}"|egrep "^http_host"|perl -wple 's/^http_host = (.*)$/$1/'`
+        PORT=`grep -A64 "\[General\]" "${plexpy_conf}"|egrep "^http_port"|perl -wple 's/^http_port = (.*)$/$1/'`
+fi
+
+status_cmd="${name}_status"
+stop_cmd="${name}_stop"
+
+command="${plexpy_dir}/PlexPy.py"
+command_args="--daemon --quiet --nolaunch --port ${PORT} --pidfile ${plexpy_pid} --config ${plexpy_conf}"
+
+# Check for wget and refuse to start without it.
+if [ ! -x "${WGET}" ]; then
+  warn "PlexPy not started: You need wget to safely shut down PlexPy."
+  exit 1
+fi
+
+# Ensure user is root when running this script.
+if [ `id -u` != "0" ]; then
+  echo "Oops, you should be root before running this!"
+  exit 1
+fi
+
+verify_plexpy_pid() {
+    # Make sure the pid corresponds to the PlexPy process.
+    pid=`cat ${plexpy_pid} 2>/dev/null`
+    ps -p ${pid} | grep -q "python ${plexpy_dir}/PlexPy.py"
+    return $?
+}
+
+# Try to stop PlexPy cleanly by calling shutdown over http.
+plexpy_stop() {
+    if [ ! -e "${plexpy_conf}" ]; then
+        echo "PlexPy' settings file does not exist. Try starting PlexPy, as this should create the file."
+        exit 1
+    fi
+    echo "Stopping $name"
+    verify_plexpy_pid
+    ${WGET} -O - -q --user=${SBUSR} --password=${SBPWD} "http://${HOST}:${PORT}/shutdown/" >/dev/null
+    
+    if [ -n "${pid}" ]; then
+      wait_for_pids ${pid}
+      echo "Stopped $name"
+    fi
+}
+
+plexpy_status() {
+    verify_plexpy_pid && echo "$name is running as ${pid}" || echo "$name is not running"
+}
+
+run_rc_command "$1"

init-scripts/init.fedora.centos.systemd

@@ -0,0 +1,66 @@
+# PlexPy - Automatic music downloader for SABnzbd
+#
+# Service Unit file for systemd system manager
+#
+# INSTALLATION NOTES
+#
+#	1. Rename this file as you want, ensuring that it ends in .service
+#		e.g. 'plexpy.service'
+#
+#	2. Adjust configuration settings as required.  More details in the
+#	   "CONFIGURATION NOTES" section shown below.
+#
+#	3. Copy this file into your systemd service unit directory, which is
+#	   often '/lib/systemd/system'.
+#
+#	4. Create any files/directories that you specified back in step #2.
+#		e.g. '/etc/plexpy/plexpy.ini'
+#			 '/home/sabnzbd/.plexpy'
+#
+#	5. Enable boot-time autostart with the following commands:
+#		systemctl daemon-reload
+#		systemctl enable plexpy.service
+#
+#	6. Start now with the following command:
+#		systemctl start plexpy.service
+#
+#   7. If troubleshooting startup-errors, start by checking permissions
+#      and ownership on the files/directories that you created in step #4.
+#
+#
+# CONFIGURATION NOTES
+#
+#	 - The example settings in this file assume that:
+#		1. You will run PlexPy as user/group: sabnzbd.sabnzbd
+#		2. You will either have PlexPy installed as a subdirectory
+#		   under '~sabnzbd', or that you will have a symlink under
+#		   '~/sabnzbd' pointing to your PlexPy install dir.
+#	    3. Your PlexPy data directory and configuration file will be
+#		   in separate locations from your PlexPy install dir, to
+#		   simplify updates.
+#			
+#    - Option names (e.g. ExecStart=, Type=) appear to be case-sensitive)
+#
+#    - Adjust ExecStart= to point to:
+# 		1. Your PlexPy executable,
+# 		2. Your config file (recommended is to put it somewhere in /etc)
+#       3. Your datadir (recommended is to NOT put it in your PlexPy exec dir)
+#
+#    - Adjust User= and Group= to the user/group you want PlexPy to run as.
+#
+#    - WantedBy= specifies which target (i.e. runlevel) to start PlexPy for.
+#        multi-user.target equates to runlevel 3 (multi-user text mode)
+#        graphical.target  equates to runlevel 5 (multi-user X11 graphical mode)
+
+[Unit]
+Description=PlexPy - Automatic music downloader for SABnzbd
+
+[Service]
+ExecStart=/home/sabnzbd/plexpy/PlexPy.py --daemon --config /etc/plexpy/plexpy.ini --datadir /home/sabnzbd/.plexpy --nolaunch --quiet
+GuessMainPID=no
+Type=forking
+User=sabnzbd
+Group=sabnzbd
+
+[Install]
+WantedBy=multi-user.target

init-scripts/init.freebsd

@@ -0,0 +1,70 @@
+#!/bin/sh
+#
+# PROVIDE: plexpy
+# REQUIRE: DAEMON sabnzbd
+# KEYWORD: shutdown
+#
+# Add the following lines to /etc/rc.conf.local or /etc/rc.conf
+# to enable this service:
+#
+# plexpy_enable (bool): Set to NO by default.
+#           Set it to YES to enable it.
+# plexpy_user:  The user account PlexPy daemon runs as what
+#           you want it to be. It uses '_sabnzbd' user by
+#           default. Do not sets it as empty or it will run
+#           as root.
+# plexpy_dir:   Directory where PlexPy lives.
+#           Default: /usr/local/plexpy
+# plexpy_chdir:  Change to this directory before running PlexPy.
+#     Default is same as plexpy_dir.
+# plexpy_pid:  The name of the pidfile to create.
+#     Default is plexpy.pid in plexpy_dir.
+PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin"
+
+. /etc/rc.subr
+
+name="plexpy"
+rcvar=${name}_enable
+
+load_rc_config ${name}
+
+: ${plexpy_enable:="NO"}
+: ${plexpy_user:="_sabnzbd"}
+: ${plexpy_dir:="/usr/local/plexpy"}
+: ${plexpy_chdir:="${plexpy_dir}"}
+: ${plexpy_pid:="${plexpy_dir}/plexpy.pid"}
+
+status_cmd="${name}_status"
+stop_cmd="${name}_stop"
+
+command="/usr/sbin/daemon"
+command_args="-f -p ${plexpy_pid} python ${plexpy_dir}/PlexPy.py ${plexpy_flags} --quiet --nolaunch"
+
+# Ensure user is root when running this script.
+if [ `id -u` != "0" ]; then
+  echo "Oops, you should be root before running this!"
+  exit 1
+fi
+
+verify_plexpy_pid() {
+    # Make sure the pid corresponds to the PlexPy process.
+    pid=`cat ${plexpy_pid} 2>/dev/null`
+    ps -p ${pid} | grep -q "python ${plexpy_dir}/PlexPy.py"
+    return $?
+}
+
+# Try to stop PlexPy cleanly by calling shutdown over http.
+plexpy_stop() {
+    echo "Stopping $name"
+    verify_plexpy_pid
+    if [ -n "${pid}" ]; then
+      wait_for_pids ${pid}
+      echo "Stopped"
+    fi
+}
+
+plexpy_status() {
+    verify_plexpy_pid && echo "$name is running as ${pid}" || echo "$name is not running"
+}
+
+run_rc_command "$1"

init-scripts/init.osx

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+<plist version="1.0">
+<dict>
+  <key>Label</key>
+  <string>plexpy</string>
+  <key>ProgramArguments</key>
+  <array>
+       <!-- Modify these two lines if you need to to reflect your python location and PlexPy install location -->
+       <string>/usr/bin/python</string>
+       <string>/Applications/PlexPy/PlexPy.py</string>
+  </array>
+  <key>RunAtLoad</key>
+  <true/>
+  <key>KeepAlive</key>
+  <true/>
+</dict>
+</plist>

init-scripts/init.solaris11

@@ -0,0 +1,47 @@
+<?xml version="1.0"?>
+<!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1">
+<!--
+        Created by Manifold
+--><service_bundle type="manifest" name="plexpy">
+
+    <service name="application/plexpy" type="service" version="1">
+
+        <create_default_instance enabled="true"/>
+
+        <single_instance/>
+
+        <dependency name="network" grouping="require_all" restart_on="error" type="service">
+            <service_fmri value="svc:/milestone/network:default"/>
+        </dependency>
+
+        <dependency name="filesystem" grouping="require_all" restart_on="error" type="service">
+            <service_fmri value="svc:/system/filesystem/local"/>
+        </dependency>
+
+        <method_context>
+            <method_credential user="sabnzbd" group="sabnzbd"/>
+        </method_context>
+
+        <exec_method type="method" name="start" exec="python /opt/plexpy/PlexPy.py --daemon --quiet --nolaunch" timeout_seconds="60"/>
+
+        <exec_method type="method" name="stop" exec=":kill" timeout_seconds="60"/>
+
+        <property_group name="startd" type="framework">
+            <propval name="duration" type="astring" value="contract"/>
+            <propval name="ignore_error" type="astring" value="core,signal"/>
+        </property_group>
+
+
+        <stability value="Evolving"/>
+
+        <template>
+            <common_name>
+                <loctext xml:lang="C">
+                    PlexPy
+                </loctext>
+            </common_name>
+        </template>
+
+    </service>
+
+</service_bundle>

init-scripts/init.ubuntu

@@ -0,0 +1,209 @@
+#!/bin/sh
+#
+## Don't edit this file
+## Edit user configuation in /etc/default/plexpy to change
+##
+## Make sure init script is executable
+## sudo chmod +x /path/to/init.ubuntu
+##
+## Install the init script
+## sudo ln -s /path/to/init.ubuntu /etc/init.d/plexpy
+##
+## Create the plexpy daemon user:
+## sudo adduser --system --no-create-home plexpy
+##
+## Make sure /opt/plexpy is owned by the plexpy user
+## sudo chown plexpy:nogroup -R /opt/plexpy
+##
+## Touch the default file to stop the warning message when starting
+## sudo touch /etc/default/plexpy
+##
+## To start PlexPy automatically
+## sudo  update-rc.d plexpy defaults
+##
+## To start/stop/restart PlexPy
+## sudo service plexpy start
+## sudo service plexpy stop
+## sudo service plexpy restart
+##
+## HP_USER=         #$RUN_AS, username to run plexpy under, the default is plexpy
+## HP_HOME=         #$APP_PATH, the location of PlexPy.py, the default is /opt/plexpy
+## HP_DATA=         #$DATA_DIR, the location of plexpy.db, cache, logs, the default is /opt/plexpy
+## HP_PIDFILE=      #$PID_FILE, the location of plexpy.pid, the default is /var/run/plexpy/plexpy.pid
+## PYTHON_BIN=      #$DAEMON, the location of the python binary, the default is /usr/bin/python
+## HP_OPTS=         #$EXTRA_DAEMON_OPTS, extra cli option for plexpy, i.e. " --config=/home/plexpy/config.ini"
+## SSD_OPTS=        #$EXTRA_SSD_OPTS, extra start-stop-daemon option like " --group=users"
+## HP_PORT=         #$PORT_OPTS, hardcoded port for the webserver, overrides value in config.ini
+##
+## EXAMPLE if want to run as different user
+## add HP_USER=username to /etc/default/plexpy
+## otherwise default plexpy is used
+#
+### BEGIN INIT INFO
+# Provides:          plexpy
+# Required-Start:    $local_fs $network $remote_fs
+# Required-Stop:     $local_fs $network $remote_fs
+# Should-Start:      $NetworkManager
+# Should-Stop:       $NetworkManager
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: starts instance of PlexPy
+# Description:       starts instance of PlexPy using start-stop-daemon
+### END INIT INFO
+
+# Script name
+NAME=plexpy
+
+# App name
+DESC=PlexPy
+
+SETTINGS_LOADED=FALSE
+
+. /lib/lsb/init-functions
+
+# Source PlexPy configuration
+if [ -f /etc/default/plexpy ]; then
+    SETTINGS=/etc/default/plexpy
+else
+    log_warning_msg "/etc/default/plexpy not found using default settings.";
+fi
+
+check_retval() {
+    if [ $? -eq 0 ]; then
+        log_end_msg 0
+        return 0
+    else
+        log_end_msg 1
+        exit 1
+    fi
+}
+
+load_settings() {
+    if [ $SETTINGS_LOADED != "TRUE" ]; then
+        . $SETTINGS
+
+        ## The defaults
+        # Run as username
+        RUN_AS=${HP_USER-plexpy}
+
+        # Path to app HP_HOME=path_to_app_PlexPy.py
+        APP_PATH=${HP_HOME-/opt/plexpy}
+
+        # Data directory where plexpy.db, cache and logs are stored
+        DATA_DIR=${HP_DATA-/opt/plexpy}
+
+        # Path to store PID file
+        PID_FILE=${HP_PIDFILE-/var/run/plexpy/plexpy.pid}
+
+        # Path to python bin
+        DAEMON=${PYTHON_BIN-/usr/bin/python}
+
+        # Extra daemon option like: HP_OPTS=" --config=/home/plexpy/config.ini"
+        EXTRA_DAEMON_OPTS=${HP_OPTS-}
+
+        # Extra start-stop-daemon option like START_OPTS=" --group=users"
+        EXTRA_SSD_OPTS=${SSD_OPTS-}
+
+        # Hardcoded port to run on, overrides config.ini settings
+        [ -n "$HP_PORT" ] && {
+            PORT_OPTS=" --port=${HP_PORT} "
+        }
+
+        DAEMON_OPTS=" PlexPy.py --quiet --daemon --nolaunch --pidfile=${PID_FILE} --datadir=${DATA_DIR} ${PORT_OPTS}${EXTRA_DAEMON_OPTS}"
+
+        SETTINGS_LOADED=TRUE
+    fi
+
+    [ -x $DAEMON ] || {
+        log_warning_msg "$DESC: Can't execute daemon, aborting. See $DAEMON";
+        return 1;}
+
+    return 0
+}
+
+load_settings || exit 0
+
+is_running () {
+    # returns 1 when running, else 0.
+    if [ -e $PID_FILE ]; then
+      PID=`cat $PID_FILE`
+
+      RET=$?
+      [ $RET -gt 1 ] && exit 1 || return $RET
+    else
+      return 1
+    fi
+}
+
+handle_pid () {
+    PID_PATH=`dirname $PID_FILE`
+    [ -d $PID_PATH ] || mkdir -p $PID_PATH && chown -R $RUN_AS $PID_PATH > /dev/null || {
+        log_warning_msg "$DESC: Could not create $PID_FILE, See $SETTINGS, aborting.";
+        return 1;}
+
+    if [ -e $PID_FILE ]; then
+        PID=`cat $PID_FILE`
+        if ! kill -0 $PID > /dev/null 2>&1; then
+            log_warning_msg "Removing stale $PID_FILE"
+            rm $PID_FILE
+        fi
+    fi
+}
+
+handle_datadir () {
+    [ -d $DATA_DIR ] || mkdir -p $DATA_DIR && chown -R $RUN_AS $DATA_DIR > /dev/null || {
+        log_warning_msg "$DESC: Could not create $DATA_DIR, See $SETTINGS, aborting.";
+        return 1;}
+}
+
+handle_updates () {
+    chown -R $RUN_AS $APP_PATH > /dev/null || {
+        log_warning_msg "$DESC: $APP_PATH not writable by $RUN_AS for web-updates";
+        return 0; }
+}
+
+start_plexpy () {
+    handle_pid
+    handle_datadir
+    handle_updates
+    if ! is_running; then
+        log_daemon_msg "Starting $DESC"
+        start-stop-daemon -o -d $APP_PATH -c $RUN_AS --start $EXTRA_SSD_OPTS --pidfile $PID_FILE --exec $DAEMON -- $DAEMON_OPTS
+        check_retval
+    else
+        log_success_msg "$DESC: already running (pid $PID)"
+    fi
+}
+
+stop_plexpy () {
+    if is_running; then
+        log_daemon_msg "Stopping $DESC"
+        start-stop-daemon -o --stop --pidfile $PID_FILE --retry 15
+        check_retval
+    else
+        log_success_msg "$DESC: not running"
+    fi
+}
+
+case "$1" in
+    start)
+        start_plexpy
+        ;;
+    stop)
+        stop_plexpy
+        ;;
+    restart|force-reload)
+        stop_plexpy
+        start_plexpy
+        ;;
+    status)
+        status_of_proc -p "$PID_FILE" "$DAEMON" "$DESC"
+        ;;
+    *)
+        N=/etc/init.d/$NAME
+        echo "Usage: $N {start|stop|restart|force-reload|status}" >&2
+        exit 1
+        ;;
+esac
+
+exit 0

init-scripts/init.upstart

@@ -0,0 +1,18 @@
+# plexpy - Automatic music downloader
+#
+# This is a session/user job. Install this file into /usr/share/upstart/sessions
+# if plexpy is installed system wide, and into $XDG_CONFIG_HOME/upstart if
+# plexpy is installed per user. Change the executable path appropiately.
+
+start on desktop-start
+stop on desktop-end
+
+env CONFIG=""$XDG_CONFIG_HOME"/plexpy"
+env DATA=""$XDG_DATA_HOME"/plexpy"
+
+pre-start script
+    [ -d "$CONFIG" ] || mkdir -p "$CONFIG"
+    [ -d "$DATA" ] || mkdir -p "$DATA"
+end script
+
+exec PlexPy.py --nolaunch --config "$CONFIG"/config.ini --datadir "$DATA"

lib/cherrypy/LICENSE.txt

@@ -1,25 +0,0 @@
-Copyright (c) 2004-2011, CherryPy Team (team@cherrypy.org)
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification, 
-are permitted provided that the following conditions are met:
-
-    * Redistributions of source code must retain the above copyright notice, 
-      this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright notice, 
-      this list of conditions and the following disclaimer in the documentation 
-      and/or other materials provided with the distribution.
-    * Neither the name of the CherryPy Team nor the names of its contributors 
-      may be used to endorse or promote products derived from this software 
-      without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND 
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE 
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

lib/cherrypy/__init__.py

@@ -56,7 +56,7 @@ with customized or extended components. The core API's are:
 These API's are described in the `CherryPy specification <https://bitbucket.org/cherrypy/cherrypy/wiki/CherryPySpec>`_.
 """
 
-__version__ = "3.6.0"
+__version__ = "3.8.0"
 
 from cherrypy._cpcompat import urljoin as _urljoin, urlencode as _urlencode
 from cherrypy._cpcompat import basestring, unicodestr, set

lib/cherrypy/__main__.py

@@ -0,0 +1,4 @@
+import cherrypy.daemon
+
+if __name__ == '__main__':
+    cherrypy.daemon.run()

lib/cherrypy/_cplogging.py

@@ -209,9 +209,11 @@ class LogManager(object):
         If ``traceback`` is True, the traceback of the current exception
         (if any) will be appended to ``msg``.
         """
+        exc_info = None
         if traceback:
-            msg += _cperror.format_exc()
-        self.error_log.log(severity, ' '.join((self.time(), context, msg)))
+            exc_info = _cperror._exc_info()
+
+        self.error_log.log(severity, ' '.join((self.time(), context, msg)), exc_info=exc_info)
 
     def __call__(self, *args, **kwargs):
         """An alias for ``error``."""

lib/cherrypy/daemon.py

@@ -1,4 +1,3 @@
-#! /usr/bin/env python
 """The CherryPy daemon."""
 
 import sys
@@ -76,7 +75,7 @@ def start(configfiles=None, daemonize=False, environment=None,
         engine.block()
 
 
-if __name__ == '__main__':
+def run():
     from optparse import OptionParser
 
     p = OptionParser()

lib/cherrypy/process/servers.py

@@ -124,7 +124,7 @@ class ServerAdapter(object):
 
     If you need to start more than one HTTP server (to serve on multiple
     ports, or protocols, etc.), you can manually register each one and then
-    start them all with bus.start:
+    start them all with bus.start::
 
         s1 = ServerAdapter(bus, MyWSGIServer(host='0.0.0.0', port=80))
         s2 = ServerAdapter(bus, another.HTTPServer(host='127.0.0.1', SSL=True))
@@ -183,7 +183,8 @@ class ServerAdapter(object):
         if not self.httpserver:
             return ''
         host, port = self.bind_addr
-        if getattr(self.httpserver, 'ssl_certificate', None):
+        if getattr(self.httpserver, 'ssl_certificate', None) or \
+                getattr(self.httpserver, 'ssl_adapter', None):
             scheme = "https"
             if port != 443:
                 host += ":%s" % port

lib/cherrypy/scaffold/apache-fcgi.conf

@@ -1,22 +0,0 @@
-# Apache2 server conf file for using CherryPy with mod_fcgid.
-
-# This doesn't have to be "C:/", but it has to be a directory somewhere, and
-# MUST match the directory used in the FastCgiExternalServer directive, below.
-DocumentRoot "C:/"
-
-ServerName 127.0.0.1
-Listen 80
-LoadModule fastcgi_module modules/mod_fastcgi.dll
-LoadModule rewrite_module modules/mod_rewrite.so
-
-Options ExecCGI
-SetHandler fastcgi-script
-RewriteEngine On
-# Send requests for any URI to our fastcgi handler.
-RewriteRule ^(.*)$ /fastcgi.pyc [L]
-
-# The FastCgiExternalServer directive defines filename as an external FastCGI application.
-# If filename does not begin with a slash (/) then it is assumed to be relative to the ServerRoot.
-# The filename does not have to exist in the local filesystem. URIs that Apache resolves to this
-# filename will be handled by this external FastCGI application.
-FastCgiExternalServer "C:/fastcgi.pyc" -host 127.0.0.1:8088

lib/cherrypy/scaffold/example.conf

@@ -1,3 +0,0 @@
-[/]
-log.error_file: "error.log"
-log.access_file: "access.log"

lib/cherrypy/scaffold/site.conf

@@ -1,14 +0,0 @@
-[global]
-# Uncomment this when you're done developing
-#environment: "production"
-
-server.socket_host: "0.0.0.0"
-server.socket_port: 8088
-
-# Uncomment the following lines to run on HTTPS at the same time
-#server.2.socket_host: "0.0.0.0"
-#server.2.socket_port: 8433
-#server.2.ssl_certificate: '../test/test.pem'
-#server.2.ssl_private_key: '../test/test.pem'
-
-tree.myapp: cherrypy.Application(scaffold.root, "/", "example.conf")

lib/cherrypy/wsgiserver/wsgiserver2.py

@@ -1757,7 +1757,7 @@ class HTTPServer(object):
     timeout = 10
     """The timeout in seconds for accepted connections (default 10)."""
 
-    version = "CherryPy/3.6.0"
+    version = "CherryPy/3.8.0"
     """A version string for the HTTPServer."""
 
     software = None

plexpy/plextv.py

@@ -19,7 +19,6 @@ from xml.dom import minidom
 from httplib import HTTPSConnection
 from urlparse import parse_qsl
 from urllib import urlencode
-from pynma import pynma
 
 import base64
 import cherrypy