importing installer and configuration files

install/0.9.7/rhel/clamd.conf

@@ -0,0 +1,502 @@
+##
+## Example config file for the Clam AV daemon
+## Please read the clamd.conf(5) manual before editing this file.
+##
+
+
+# Comment or remove the line below.
+#Example
+
+# Uncomment this option to enable logging.
+# LogFile must be writable for the user running daemon.
+# A full path is required.
+# Default: disabled
+LogFile /var/log/clamav/clamd.log
+
+# By default the log file is locked for writing - the lock protects against
+# running clamd multiple times (if want to run another clamd, please
+# copy the configuration file, change the LogFile variable, and run
+# the daemon with --config-file option).
+# This option disables log file locking.
+# Default: no
+#LogFileUnlock yes
+
+# Maximum size of the log file.
+# Value of 0 disables the limit.
+# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
+# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). To specify the size
+# in bytes just don't use modifiers.
+# Default: 1M
+LogFileMaxSize 0
+
+# Log time with each message.
+# Default: no
+LogTime yes
+
+# Also log clean files. Useful in debugging but drastically increases the
+# log size.
+# Default: no
+#LogClean yes
+
+# Use system logger (can work together with LogFile).
+# Default: no
+LogSyslog yes
+
+# Specify the type of syslog messages - please refer to 'man syslog'
+# for facility names.
+# Default: LOG_LOCAL6
+#LogFacility LOG_MAIL
+
+# Enable verbose logging.
+# Default: no
+#LogVerbose yes
+
+# Log additional information about the infected file, such as its
+# size and hash, together with the virus name.
+#ExtendedDetectionInfo yes
+
+# This option allows you to save a process identifier of the listening
+# daemon (main thread).
+# Default: disabled
+PidFile /var/run/clamav/clamd.pid
+
+# Optional path to the global temporary directory.
+# Default: system specific (usually /tmp or /var/tmp).
+TemporaryDirectory /var/tmp
+
+# Path to the database directory.
+# Default: hardcoded (depends on installation options)
+DatabaseDirectory /var/lib/clamav
+
+# Only load the official signatures published by the ClamAV project.
+# Default: no
+#OfficialDatabaseOnly no
+
+# The daemon can work in local mode, network mode or both. 
+# Due to security reasons we recommend the local mode.
+
+# Path to a local socket file the daemon will listen on.
+# Default: disabled (must be specified by a user)
+LocalSocket /var/run/clamav/clamd.sock
+
+# Sets the group ownership on the unix socket.
+# Default: disabled (the primary group of the user running clamd)
+#LocalSocketGroup virusgroup
+
+# Sets the permissions on the unix socket to the specified mode.
+# Default: disabled (socket is world accessible)
+#LocalSocketMode 660
+
+# Remove stale socket after unclean shutdown.
+# Default: yes
+FixStaleSocket yes
+
+# TCP port address.
+# Default: no
+TCPSocket 3310
+
+# TCP address.
+# By default we bind to INADDR_ANY, probably not wise.
+# Enable the following to provide some degree of protection
+# from the outside world.
+# Default: no
+TCPAddr 127.0.0.1
+
+# Maximum length the queue of pending connections may grow to.
+# Default: 200
+MaxConnectionQueueLength 30
+
+# Clamd uses FTP-like protocol to receive data from remote clients.
+# If you are using clamav-milter to balance load between remote clamd daemons
+# on firewall servers you may need to tune the options below.
+
+# Close the connection when the data size limit is exceeded.
+# The value should match your MTA's limit for a maximum attachment size.
+# Default: 25M
+#StreamMaxLength 10M
+
+# Limit port range.
+# Default: 1024
+#StreamMinPort 30000
+# Default: 2048
+#StreamMaxPort 32000
+
+# Maximum number of threads running at the same time.
+# Default: 10
+MaxThreads 50
+
+# Waiting for data from a client socket will timeout after this time (seconds).
+# Default: 120
+ReadTimeout 300
+
+# This option specifies the time (in seconds) after which clamd should
+# timeout if a client doesn't provide any initial command after connecting.
+# Default: 5
+#CommandReadTimeout 5
+
+# This option specifies how long to wait (in miliseconds) if the send buffer is full.
+# Keep this value low to prevent clamd hanging
+#
+# Default: 500
+#SendBufTimeout 200
+
+# Maximum number of queued items (including those being processed by MaxThreads threads)
+# It is recommended to have this value at least twice MaxThreads if possible.
+# WARNING: you shouldn't increase this too much to avoid running out  of file descriptors,
+# the following condition should hold:
+# MaxThreads*MaxRecursion + (MaxQueue - MaxThreads) + 6< RLIMIT_NOFILE (usual max is 1024)
+#
+# Default: 100
+#MaxQueue 200
+
+# Waiting for a new job will timeout after this time (seconds).
+# Default: 30
+#IdleTimeout 60
+
+# Don't scan files and directories matching regex
+# This directive can be used multiple times
+# Default: scan all
+#ExcludePath ^/proc/
+#ExcludePath ^/sys/
+
+# Maximum depth directories are scanned at.
+# Default: 15
+#MaxDirectoryRecursion 20
+
+# Follow directory symlinks.
+# Default: no
+#FollowDirectorySymlinks yes
+
+# Follow regular file symlinks.
+# Default: no
+#FollowFileSymlinks yes
+
+# Scan files and directories on other filesystems.
+# Default: yes
+#CrossFilesystems yes
+
+# Perform a database check.
+# Default: 600 (10 min)
+#SelfCheck 600
+
+# Execute a command when virus is found. In the command string %v will
+# be replaced with the virus name.
+# Default: no
+#VirusEvent /usr/local/bin/send_sms 123456789 "VIRUS ALERT: %v"
+
+# Run as another user (clamd must be started by root for this option to work)
+# Default: don't drop privileges
+User clam
+
+# Initialize supplementary group access (clamd must be started by root).
+# Default: no
+AllowSupplementaryGroups yes
+
+# Stop daemon when libclamav reports out of memory condition.
+#ExitOnOOM yes
+
+# Don't fork into background.
+# Default: no
+#Foreground yes
+
+# Enable debug messages in libclamav.
+# Default: no
+#Debug yes
+
+# Do not remove temporary files (for debug purposes).
+# Default: no
+#LeaveTemporaryFiles yes
+
+# Detect Possibly Unwanted Applications.
+# Default: no
+#DetectPUA yes
+
+# Exclude a specific PUA category. This directive can be used multiple times.
+# See http://www.clamav.net/support/pua for the complete list of PUA
+# categories.
+# Default: Load all categories (if DetectPUA is activated)
+#ExcludePUA NetTool
+#ExcludePUA PWTool
+
+# Only include a specific PUA category. This directive can be used multiple
+# times.
+# Default: Load all categories (if DetectPUA is activated)
+#IncludePUA Spy
+#IncludePUA Scanner
+#IncludePUA RAT
+
+# In some cases (eg. complex malware, exploits in graphic files, and others),
+# ClamAV uses special algorithms to provide accurate detection. This option
+# controls the algorithmic detection.
+# Default: yes
+#AlgorithmicDetection yes
+
+
+##
+## Executable files
+##
+
+# PE stands for Portable Executable - it's an executable file format used
+# in all 32 and 64-bit versions of Windows operating systems. This option allows
+# ClamAV to perform a deeper analysis of executable files and it's also
+# required for decompression of popular executable packers such as UPX, FSG,
+# and Petite. If you turn off this option, the original files will still be
+# scanned, but without additional processing.
+# Default: yes
+ScanPE yes
+
+# Executable and Linking Format is a standard format for UN*X executables.
+# This option allows you to control the scanning of ELF files.
+# If you turn off this option, the original files will still be scanned, but
+# without additional processing.
+# Default: yes
+ScanELF yes
+
+# With this option clamav will try to detect broken executables (both PE and
+# ELF) and mark them as Broken.Executable.
+# Default: no
+DetectBrokenExecutables yes
+
+
+##
+## Documents
+##
+
+# This option enables scanning of OLE2 files, such as Microsoft Office
+# documents and .msi files.
+# If you turn off this option, the original files will still be scanned, but
+# without additional processing.
+# Default: yes
+ScanOLE2 yes
+
+
+# With this option enabled OLE2 files with VBA macros, which were not
+# detected by signatures will be marked as "Heuristics.OLE2.ContainsMacros".
+# Default: no
+#OLE2BlockMacros no
+
+# This option enables scanning within PDF files.
+# If you turn off this option, the original files will still be scanned, but
+# without decoding and additional processing.
+# Default: yes
+#ScanPDF yes
+
+
+##
+## Mail files
+##
+
+# Enable internal e-mail scanner.
+# If you turn off this option, the original files will still be scanned, but
+# without parsing individual messages/attachments.
+# Default: yes
+ScanMail yes
+
+# Scan RFC1341 messages split over many emails.
+# You will need to periodically clean up $TemporaryDirectory/clamav-partial directory.
+# WARNING: This option may open your system to a DoS attack.
+#	   Never use it on loaded servers.
+# Default: no
+#ScanPartialMessages yes
+
+
+# With this option enabled ClamAV will try to detect phishing attempts by using
+# signatures.
+# Default: yes
+#PhishingSignatures yes
+
+# Scan URLs found in mails for phishing attempts using heuristics.
+# Default: yes
+#PhishingScanURLs yes
+
+# Always block SSL mismatches in URLs, even if the URL isn't in the database.
+# This can lead to false positives.
+#
+# Default: no
+#PhishingAlwaysBlockSSLMismatch no
+
+# Always block cloaked URLs, even if URL isn't in database.
+# This can lead to false positives.
+#
+# Default: no
+#PhishingAlwaysBlockCloak no
+
+# Allow heuristic match to take precedence.
+# When enabled, if a heuristic scan (such as phishingScan) detects
+# a possible virus/phish it will stop scan immediately. Recommended, saves CPU
+# scan-time.
+# When disabled, virus/phish detected by heuristic scans will be reported only at
+# the end of a scan. If an archive contains both a heuristically detected
+# virus/phish, and a real malware, the real malware will be reported
+#
+# Keep this disabled if you intend to handle "*.Heuristics.*" viruses 
+# differently from "real" malware.
+# If a non-heuristically-detected virus (signature-based) is found first, 
+# the scan is interrupted immediately, regardless of this config option.
+#
+# Default: no
+#HeuristicScanPrecedence yes
+
+##
+## Data Loss Prevention (DLP)
+##
+
+# Enable the DLP module
+# Default: No
+#StructuredDataDetection yes
+
+# This option sets the lowest number of Credit Card numbers found in a file
+# to generate a detect.
+# Default: 3
+#StructuredMinCreditCardCount 5
+
+# This option sets the lowest number of Social Security Numbers found
+# in a file to generate a detect.
+# Default: 3
+#StructuredMinSSNCount 5
+
+# With this option enabled the DLP module will search for valid
+# SSNs formatted as xxx-yy-zzzz
+# Default: yes
+#StructuredSSNFormatNormal yes
+
+# With this option enabled the DLP module will search for valid
+# SSNs formatted as xxxyyzzzz
+# Default: no
+#StructuredSSNFormatStripped yes
+
+
+##
+## HTML
+##
+
+# Perform HTML normalisation and decryption of MS Script Encoder code.
+# Default: yes
+# If you turn off this option, the original files will still be scanned, but
+# without additional processing.
+#ScanHTML yes
+
+
+##
+## Archives
+##
+
+# ClamAV can scan within archives and compressed files.
+# If you turn off this option, the original files will still be scanned, but
+# without unpacking and additional processing.
+# Default: yes
+ScanArchive yes
+
+# Mark encrypted archives as viruses (Encrypted.Zip, Encrypted.RAR).
+# Default: no
+ArchiveBlockEncrypted no
+
+
+##
+## Limits
+##
+
+# The options below protect your system against Denial of Service attacks
+# using archive bombs.
+
+# This option sets the maximum amount of data to be scanned for each input file.
+# Archives and other containers are recursively extracted and scanned up to this
+# value.
+# Value of 0 disables the limit
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 100M
+#MaxScanSize 150M
+
+# Files larger than this limit won't be scanned. Affects the input file itself
+# as well as files contained inside it (when the input file is an archive, a
+# document or some other kind of container).
+# Value of 0 disables the limit.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 25M
+#MaxFileSize 30M
+
+# Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR
+# file, all files within it will also be scanned. This options specifies how
+# deeply the process should be continued.
+# Note: setting this limit too high may result in severe damage to the system.
+# Default: 16
+#MaxRecursion 10
+
+# Number of files to be scanned within an archive, a document, or any other
+# container file.
+# Value of 0 disables the limit.
+# Note: disabling this limit or setting it too high may result in severe damage
+# to the system.
+# Default: 10000
+#MaxFiles 15000
+
+
+##
+## Clamuko settings
+##
+
+# Enable Clamuko. Dazuko must be configured and running. Clamuko supports
+# both Dazuko (/dev/dazuko) and DazukoFS (/dev/dazukofs.ctrl). DazukoFS
+# is the preferred option. For more information please visit www.dazuko.org
+# Default: no
+#ClamukoScanOnAccess yes
+
+# The number of scanner threads that will be started (DazukoFS only).
+# Having multiple scanner threads allows Clamuko to serve multiple
+# processes simultaneously. This is particularly beneficial on SMP machines.
+# Default: 3
+#ClamukoScannerCount 3
+
+# Don't scan files larger than ClamukoMaxFileSize
+# Value of 0 disables the limit.
+# Default: 5M
+#ClamukoMaxFileSize 10M
+
+# Set access mask for Clamuko (Dazuko only).
+# Default: no
+#ClamukoScanOnOpen yes
+#ClamukoScanOnClose yes
+#ClamukoScanOnExec yes
+
+# Set the include paths (all files inside them will be scanned). You can have
+# multiple ClamukoIncludePath directives but each directory must be added
+# in a seperate line. (Dazuko only)
+# Default: disabled
+#ClamukoIncludePath /home
+#ClamukoIncludePath /students
+
+# Set the exclude paths. All subdirectories are also excluded. (Dazuko only)
+# Default: disabled
+#ClamukoExcludePath /home/bofh
+
+# With this option you can whitelist specific UIDs. Processes with these UIDs
+# will be able to access all files.
+# This option can be used multiple times (one per line).
+# Default: disabled
+#ClamukoExcludeUID 0
+
+# With this option enabled ClamAV will load bytecode from the database. 
+# It is highly recommended you keep this option on, otherwise you'll miss detections for many new viruses.
+# Default: yes
+#Bytecode yes
+
+# Set bytecode security level.
+# Possible values:
+#       None - no security at all, meant for debugging. DO NOT USE THIS ON PRODUCTION SYSTEMS
+#         This value is only available if clamav was built with --enable-debug!
+#       TrustSigned - trust bytecode loaded from signed .c[lv]d files,
+#                insert runtime safety checks for bytecode loaded from other sources
+#       Paranoid - don't trust any bytecode, insert runtime checks for all
+# Recommended: TrustSigned, because bytecode in .cvd files already has these checks
+# Note that by default only signed bytecode is loaded, currently you can only
+# load unsigned bytecode in --enable-debug mode.
+#
+# Default: TrustSigned
+#BytecodeSecurity TrustSigned
+
+# Set bytecode timeout in miliseconds.
+# 
+# Default: 5000
+# BytecodeTimeout 1000

install/0.9.7/rhel/dnsbl.conf

@@ -0,0 +1,3 @@
+bl.spamcop.net
+zen.spamhaus.org
+dnsbl.sorbs.net

install/0.9.7/rhel/dovecot.conf

@@ -0,0 +1,29 @@
+protocols = imap imaps pop3 pop3s
+log_path = /var/log/dovecot.log
+ssl_cert_file = /etc/pki/tls/certs/exim.pem
+ssl_key_file = /etc/pki/tls/private/exim.pem
+
+disable_plaintext_auth = no
+mail_location = maildir:%h/mail/%d/%n
+umask = 0077
+pop3_uidl_format = %08Xu%08Xv
+auth_verbose = yes
+auth_username_format = %Lu
+
+auth default {
+    mechanisms = plain login
+    passdb passwd-file {
+        args = /etc/exim/domains/%d/passwd
+    }
+
+    userdb passwd-file {
+        args = /etc/exim/domains/%d/passwd
+    }
+
+    socket listen {
+        client {
+            path = /var/run/dovecot/auth-client
+            mode = 0666
+        }
+    }
+}

install/0.9.7/rhel/dovecot/conf.d/10-auth.conf

@@ -0,0 +1,4 @@
+disable_plaintext_auth = no
+auth_verbose = yes
+!include auth-passwdfile.conf.ext
+

install/0.9.7/rhel/dovecot/conf.d/10-logging.conf

@@ -0,0 +1 @@
+log_path = /var/log/dovecot.log

install/0.9.7/rhel/dovecot/conf.d/10-mail.conf

@@ -0,0 +1,4 @@
+mail_privileged_group = mail
+mail_access_groups = mail
+mail_location = maildir:%h/mail/%d/%n
+pop3_uidl_format = %08Xu%08Xv

install/0.9.7/rhel/dovecot/conf.d/10-master.conf

@@ -0,0 +1,29 @@
+service imap-login {
+  inet_listener imap {
+  }
+  inet_listener imaps {
+  }
+}
+
+service pop3-login {
+  inet_listener pop3 {
+  }
+  inet_listener pop3s {
+  }
+}
+
+
+service imap {
+}
+
+service pop3 {
+}
+
+service auth {
+  unix_listener auth-client {
+    group = mail
+    mode = 0660
+    user = dovecot
+  }
+  user = dovecot
+}

install/0.9.7/rhel/dovecot/conf.d/10-ssl.conf

@@ -0,0 +1,3 @@
+ssl = yes
+ssl_cert = </etc/pki/tls/certs/exim.pem
+ssl_key = </etc/pki/tls/private/exim.pem

install/0.9.7/rhel/dovecot/conf.d/20-imap.conf

@@ -0,0 +1,53 @@
+##
+## IMAP specific settings
+##
+
+protocol imap {
+  # Maximum IMAP command line length. Some clients generate very long command
+  # lines with huge mailboxes, so you may need to raise this if you get
+  # "Too long argument" or "IMAP command line too large" errors often.
+  #imap_max_line_length = 64k
+
+  # Maximum number of IMAP connections allowed for a user from each IP address.
+  # NOTE: The username is compared case-sensitively.
+  #mail_max_userip_connections = 10
+
+  # Space separated list of plugins to load (default is global mail_plugins).
+  #mail_plugins = $mail_plugins
+
+  # IMAP logout format string:
+  #  %i - total number of bytes read from client
+  #  %o - total number of bytes sent to client
+  #imap_logout_format = bytes=%i/%o
+
+  # Override the IMAP CAPABILITY response. If the value begins with '+',
+  # add the given capabilities on top of the defaults (e.g. +XFOO XBAR).
+  #imap_capability = 
+
+  # How long to wait between "OK Still here" notifications when client is
+  # IDLEing.
+  #imap_idle_notify_interval = 2 mins
+
+  # ID field names and values to send to clients. Using * as the value makes
+  # Dovecot use the default value. The following fields have default values
+  # currently: name, version, os, os-version, support-url, support-email.
+  #imap_id_send = 
+
+  # ID fields sent by client to log. * means everything.
+  #imap_id_log =
+
+  # Workarounds for various client bugs:
+  #   delay-newmail:
+  #     Send EXISTS/RECENT new mail notifications only when replying to NOOP
+  #     and CHECK commands. Some clients ignore them otherwise, for example OSX
+  #     Mail (<v2.1). Outlook Express breaks more badly though, without this it
+  #     may show user "Message no longer in server" errors. Note that OE6 still
+  #     breaks even with this workaround if synchronization is set to
+  #     "Headers Only".
+  #   tb-extra-mailbox-sep:
+  #     With mbox storage a mailbox can contain either mails or submailboxes,
+  #     but not both. Thunderbird separates these two by forcing server to
+  #     accept '/' suffix in mailbox names in subscriptions list.
+  # The list is space-separated.
+  #imap_client_workarounds = 
+}

install/0.9.7/rhel/dovecot/conf.d/20-pop3.conf

@@ -0,0 +1,86 @@
+##
+## POP3 specific settings
+##
+
+protocol pop3 {
+  # Don't try to set mails non-recent or seen with POP3 sessions. This is
+  # mostly intended to reduce disk I/O. With maildir it doesn't move files
+  # from new/ to cur/, with mbox it doesn't write Status-header.
+  #pop3_no_flag_updates = no
+
+  # Support LAST command which exists in old POP3 specs, but has been removed
+  # from new ones. Some clients still wish to use this though. Enabling this
+  # makes RSET command clear all \Seen flags from messages.
+  #pop3_enable_last = no
+
+  # If mail has X-UIDL header, use it as the mail's UIDL.
+  #pop3_reuse_xuidl = no
+
+  # Keep the mailbox locked for the entire POP3 session.
+  #pop3_lock_session = no
+
+  # POP3 requires message sizes to be listed as if they had CR+LF linefeeds.
+  # Many POP3 servers violate this by returning the sizes with LF linefeeds,
+  # because it's faster to get. When this setting is enabled, Dovecot still
+  # tries to do the right thing first, but if that requires opening the
+  # message, it fallbacks to the easier (but incorrect) size.
+  #pop3_fast_size_lookups = no
+
+  # POP3 UIDL (unique mail identifier) format to use. You can use following
+  # variables, along with the variable modifiers described in
+  # doc/wiki/Variables.txt (e.g. %Uf for the filename in uppercase)
+  #
+  #  %v - Mailbox's IMAP UIDVALIDITY
+  #  %u - Mail's IMAP UID
+  #  %m - MD5 sum of the mailbox headers in hex (mbox only)
+  #  %f - filename (maildir only)
+  #  %g - Mail's GUID
+  #
+  # If you want UIDL compatibility with other POP3 servers, use:
+  #  UW's ipop3d         : %08Xv%08Xu
+  #  Courier             : %f or %v-%u (both might be used simultaneosly)
+  #  Cyrus (<= 2.1.3)    : %u
+  #  Cyrus (>= 2.1.4)    : %v.%u
+  #  Dovecot v0.99.x     : %v.%u
+  #  tpop3d              : %Mf
+  #
+  # Note that Outlook 2003 seems to have problems with %v.%u format which was
+  # Dovecot's default, so if you're building a new server it would be a good
+  # idea to change this. %08Xu%08Xv should be pretty fail-safe.
+  #
+  #pop3_uidl_format = %08Xu%08Xv
+
+  # Permanently save UIDLs sent to POP3 clients, so pop3_uidl_format changes
+  # won't change those UIDLs. Currently this works only with Maildir.
+  #pop3_save_uidl = no
+
+  # POP3 logout format string:
+  #  %i - total number of bytes read from client
+  #  %o - total number of bytes sent to client
+  #  %t - number of TOP commands
+  #  %p - number of bytes sent to client as a result of TOP command
+  #  %r - number of RETR commands
+  #  %b - number of bytes sent to client as a result of RETR command
+  #  %d - number of deleted messages
+  #  %m - number of messages (before deletion)
+  #  %s - mailbox size in bytes (before deletion)
+  #  %u - old/new UIDL hash. may help finding out if UIDLs changed unexpectedly
+  #pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s
+
+  # Maximum number of POP3 connections allowed for a user from each IP address.
+  # NOTE: The username is compared case-sensitively.
+  #mail_max_userip_connections = 3
+
+  # Space separated list of plugins to load (default is global mail_plugins).
+  #mail_plugins = $mail_plugins
+
+  # Workarounds for various client bugs:
+  #   outlook-no-nuls:
+  #     Outlook and Outlook Express hang if mails contain NUL characters.
+  #     This setting replaces them with 0x80 character.
+  #   oe-ns-eoh:
+  #     Outlook Express and Netscape Mail breaks if end of headers-line is
+  #     missing. This option simply sends it if it's missing.
+  # The list is space-separated.
+  #pop3_client_workarounds = 
+}

install/0.9.7/rhel/dovecot/conf.d/auth-passwdfile.conf.ext

@@ -0,0 +1,9 @@
+passdb {
+  driver = passwd-file
+  args = scheme=MD5-CRYPT username_format=%n /etc/exim/domains/%d/passwd
+}
+
+userdb {
+  driver = passwd-file
+  args = username_format=%n /etc/exim/domains/%d/passwd
+}

install/0.9.7/rhel/dovecot/dovecot.conf

@@ -0,0 +1,4 @@
+protocols = imap pop3
+listen = *, ::
+base_dir = /var/run/dovecot/
+!include conf.d/*.conf

install/0.9.7/rhel/exim.conf

@@ -0,0 +1,313 @@
+##########################################################################
+SPAMASSASSIN = yes
+SPAM_SCORE = 10
+CLAMD =  yes
+##########################################################################
+
+domainlist local_domains = dsearch;/etc/exim/domains/
+domainlist relay_to_domains = dsearch;/etc/exim/domains/
+hostlist   relay_from_hosts = 127.0.0.1
+hostlist   spammers = net-iplsearch;/etc/exim/spam-blocks.conf
+
+acl_smtp_connect = acl_check_spammers
+acl_smtp_mail = acl_check_mail
+acl_smtp_rcpt = acl_check_rcpt
+acl_smtp_data = acl_check_data
+acl_smtp_mime = acl_check_mime
+
+.ifdef SPAMASSASSIN
+spamd_address = 127.0.0.1 783
+.endif
+
+.ifdef CLAMD
+av_scanner = clamd: /var/run/clamav/clamd.sock
+.endif
+
+tls_advertise_hosts = *
+tls_certificate = /etc/pki/tls/certs/exim.pem
+tls_privatekey = /etc/pki/tls/private/exim.pem
+
+daemon_smtp_ports = 25 : 465 : 587
+tls_on_connect_ports = 465
+never_users = root
+host_lookup = *
+rfc1413_hosts = *
+rfc1413_query_timeout = 5s
+ignore_bounce_errors_after = 2d
+timeout_frozen_after = 7d
+
+DKIM_DOMAIN = ${lc:${domain:$h_from:}}
+DKIM_FILE = /etc/exim/domains/${lc:${domain:$h_from:}}/dkim.pem
+DKIM_PRIVATE_KEY = ${if exists{DKIM_FILE}{DKIM_FILE}{0}}
+
+##########################################################################
+begin acl
+##########################################################################
+acl_check_spammers:
+  drop    message       = Your host in blacklist on this server.
+          log_message   = Host in blacklist
+          hosts         = +spammers
+  deny    message       = rejected because $sender_host_address is in a black list at $dnslist_domain\\n$dnslist_text
+          dnslists      = ${readfile {/etc/exim/dnsbl.conf}{:}}
+  accept
+
+acl_check_mail:
+  deny
+          condition     = ${if eq{$sender_helo_name}{}}
+          message       = HELO required before MAIL
+  drop
+          condition     = ${if isip{$sender_helo_name}}
+          message       = Access denied - Invalid HELO name (See RFC2821 4.1.3)
+  drop    message       = Helo name contains a ip address (HELO was $sender_helo_name) and not is valid
+          condition     = ${if match{$sender_helo_name}{\N((\d{1,3}[.-]\d{1,3}[.-]\d{1,3}[.-]\d{1,3})|([0-9a-f]{8})|([0-9A-F]{8}))\N}{yes}{no}}
+          condition     = ${if match {${lookup dnsdb{>: defer_never,ptr=$sender_host_address}}\}{$sender_helo_name}{no}{yes}}
+          delay         = 45s
+  drop
+          condition     = ${if match{$sender_helo_name}{\N^\[\N}{no}{yes}}
+          condition     = ${if match{$sender_helo_name}{\N\.\N}{no}{yes}}
+          message       = Access denied - Invalid HELO name (See RFC2821 4.1.1.1)
+  drop
+          condition     = ${if isip{$sender_helo_name}}
+          message       = Access denied - Invalid HELO name (See RFC2821 4.1.3)
+  drop
+          condition     = ${if match{$sender_helo_name}{\N\.$\N}}
+          message       = Access denied - Invalid HELO name (See RFC2821 4.1.1.1)
+#  drop    message       = "REJECTED - Bad HELO - Host impersonating [$sender_helo_name]"
+#          condition     = ${if match{$sender_helo_name}{$primary_hostname}}
+  drop    condition     = ${if eq{[$interface_address]}{$sender_helo_name}}
+          message       = $interface_address is _my_ address
+  accept
+
+
+acl_check_rcpt:
+  accept  hosts         = :
+  deny    message       = Restricted characters in address
+          domains       = +local_domains
+          local_parts   = ^[.] : ^.*[@%!/|]
+  deny    message       = Restricted characters in address
+          domains       = !+local_domains
+          local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
+  accept  hosts         = +relay_from_hosts
+          control       = submission
+  accept  local_parts   = postmaster
+          domains       = +local_domains
+  require verify        = sender
+  accept  authenticated = *
+          control       = submission/domain=
+  require message       = relay not permitted
+          domains       = +local_domains : +relay_to_domains
+  require verify        = recipient
+.ifdef CLAMD
+  warn    set acl_m0    = no
+  warn    condition     = ${if exists {/etc/exim/domains/$domain/antivirus}{yes}{no}}
+          set acl_m0    = yes
+.endif
+.ifdef SPAMASSASSIN
+  warn    set acl_m1    = no
+  warn    condition     = ${if exists {/etc/exim/domains/$domain/antispam}{yes}{no}}
+          set acl_m1    = yes
+.endif
+  accept
+
+
+acl_check_data:
+.ifdef CLAMD
+         deny message   = Message contains a virus ($malware_name) and has been rejected
+         malware        = *
+         condition      = ${if eq{$acl_m0}{yes}{yes}{no}}
+.endif
+
+.ifdef SPAMASSASSIN
+  warn
+         !authenticated = *
+         hosts          = !+relay_from_hosts
+         condition      = ${if < {$message_size}{100K}}
+         condition      = ${if eq{$acl_m1}{yes}{yes}{no}}
+         spam           = nobody:true/defer_ok
+         add_header     = X-Spam-Score: $spam_score_int
+         add_header     = X-Spam-Bar: $spam_bar
+         add_header     = X-Spam-Report: $spam_report
+         set acl_m2     = $spam_score_int
+  warn
+         condition      = ${if !eq{$acl_m2}{} {yes}{no}}
+         condition      = ${if >{$acl_m2}{SPAM_SCORE} {yes}{no}}
+         add_header     = X-Spam-Status: Yes
+         message        = SpamAssassin detected spam (from $sender_address to $recipients).
+.endif
+  accept
+
+
+acl_check_mime:
+  deny   message       = Blacklisted file extension detected
+         condition     = ${if match {${lc:$mime_filename}}{\N(\.ade|\.adp|\.bat|\.chm|\.cmd|\.com|\.cpl|\.exe|\.hta|\.ins|\.isp|\.jse|\.lib|\.lnk|\.mde|\.msc|\.msp|\.mst|\.pif|\.scr|\.sct|\.shb|\.sys|\.vb|\.vbe|\.vbs|\.vxd|\.wsc|\.wsf|\.wsh)$\N}{1}{0}}
+  accept
+
+##########################################################################
+begin authenticators
+##########################################################################
+dovecot_plain:
+  driver = dovecot
+  public_name = PLAIN
+  server_socket = /var/run/dovecot/auth-client
+  server_set_id = $auth1
+
+dovecot_login:
+  driver = dovecot
+  public_name = LOGIN
+  server_socket = /var/run/dovecot/auth-client
+  server_set_id = $auth1
+
+##########################################################################
+begin routers
+##########################################################################
+dnslookup:
+  driver = dnslookup
+  domains = ! +local_domains
+  transport = remote_smtp
+#  ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
+  no_more
+
+system_aliases:
+  driver = redirect
+  allow_fail
+  allow_defer
+  data = ${lookup{$local_part}lsearch{/etc/aliases}}
+  file_transport = address_file
+  pipe_transport = address_pipe
+
+userforward:
+  driver = redirect
+  check_local_user
+  file = $home/.forward
+  allow_filter
+  no_verify
+  no_expn
+  check_ancestor
+  file_transport = address_file
+  pipe_transport = address_pipe
+  reply_transport = address_reply
+
+procmail:
+  driver = accept
+  check_local_user
+  require_files = ${local_part}:+${home}/.procmailrc:/usr/bin/procmail
+  transport = procmail
+  no_verify
+
+autoreplay:
+  driver = accept
+  require_files = /etc/exim/domains/$domain/autoreply.${local_part}.msg
+  condition = ${if exists{/etc/exim/domains/$domain/autoreply.${local_part}.msg}}{yes}{no}}
+  retry_use_local_part
+  transport = userautoreply
+  unseen
+
+aliases:
+  driver = redirect
+  headers_add = X-redirected: yes
+  data = ${extract{1}{:}{${lookup{$local_part@$domain}lsearch{/etc/exim/domains/$domain/aliases}}}}
+  require_files = /etc/exim/domains/$domain/aliases
+  redirect_router = dnslookup
+  pipe_transport = address_pipe
+  unseen
+
+localuser_spam:
+  driver = accept
+  transport = local_spam_delivery
+  condition = ${if eq {${if match{$h_X-Spam-Status:}{\N^Yes\N}{yes}{no}}} {${lookup{$local_part}lsearch{/etc/exim/domains/$domain/passwd}{yes}{no_such_user}}}}
+
+localuser:
+  driver = accept
+  transport = local_delivery
+  condition = ${lookup{$local_part}lsearch{/etc/exim/domains/$domain/passwd}{true}{false}}
+
+catchall:
+  driver = redirect
+  headers_add = X-redirected: yes
+  require_files = /etc/exim/domains/$domain/aliases
+  data = ${extract{1}{:}{${lookup{*@$domain}lsearch{/etc/exim/domains/$domain/aliases}}}}
+  file_transport = local_delivery
+  redirect_router = dnslookup
+
+
+##########################################################################
+begin transports
+##########################################################################
+remote_smtp:
+  driver = smtp
+  dkim_domain = DKIM_DOMAIN
+  dkim_selector = mail
+  dkim_private_key = DKIM_PRIVATE_KEY
+  dkim_canon = relaxed
+  dkim_strict = 0
+
+procmail:
+  driver = pipe
+  command = "/usr/bin/procmail -d $local_part"
+  return_path_add
+  delivery_date_add
+  envelope_to_add
+  user = $local_part
+  initgroups
+  return_output
+
+local_delivery:
+  driver = appendfile
+  maildir_format
+  maildir_use_size_file
+  user = ${extract{2}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/$domain/passwd}}}}
+  group = mail
+  create_directory
+  directory_mode = 770
+  mode = 660
+  use_lockfile = no
+  delivery_date_add
+  envelope_to_add
+  return_path_add
+  directory = "${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/$domain/passwd}}}}/mail/$domain/$local_part"
+  quota = ${extract{6}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/$domain/passwd}}}}M
+  quota_warn_threshold = 75%
+
+local_spam_delivery:
+  driver = appendfile
+  maildir_format
+  maildir_use_size_file
+  user = ${extract{2}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/$domain/passwd}}}}
+  group = mail
+  create_directory
+  directory_mode = 770
+  mode = 660
+  use_lockfile = no
+  delivery_date_add
+  envelope_to_add
+  return_path_add
+  directory = "${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/$domain/passwd}}}}/mail/$domain/$local_part/.spam"
+  quota = ${extract{6}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/$domain/passwd}}}}M
+  quota_directory = "${extract{5}{:}{${lookup{$local_part}lsearch{/etc/exim/domains/$domain/passwd}}}}/mail/$domain/$local_part"
+  quota_warn_threshold = 75%
+
+address_pipe:
+  driver = pipe
+  return_output
+
+address_file:
+  driver = appendfile
+  delivery_date_add
+  envelope_to_add
+  return_path_add
+
+address_reply:
+  driver = autoreply
+
+userautoreply:
+  driver = autoreply
+  file = /etc/exim/domains/$domain/autoreply.${local_part}.msg
+  from = "${local_part}@${domain}"
+  subject = "${if def:h_Subject: {Autoreply: ${quote:${escape:$h_Subject:}}} {Autoreply Message}}"
+  to = "${sender_address}"
+
+##########################################################################
+begin retry
+*                      *           F,2h,15m; G,16h,1h,1.5; F,4d,6h
+##########################################################################
+begin rewrite

install/0.9.7/rhel/httpd-pma.conf

@@ -0,0 +1,39 @@
+# phpMyAdmin - Web based MySQL browser written in php
+# 
+# Allows only localhost by default
+#
+# But allowing phpMyAdmin to anyone other than localhost should be considered
+# dangerous unless properly secured by SSL
+
+Alias /phpMyAdmin /usr/share/phpMyAdmin
+Alias /phpmyadmin /usr/share/phpMyAdmin
+
+<Directory /usr/share/phpMyAdmin/>
+   Order Deny,Allow
+   Deny from All
+   Allow from All
+</Directory>
+
+<Directory /usr/share/phpMyAdmin/scripts/>
+   Order Deny,Allow
+   Deny from All
+   Allow from All
+</Directory>
+
+# This directory does not require access over HTTP - taken from the original
+# phpMyAdmin upstream tarball
+#
+<Directory /usr/share/phpMyAdmin/libraries/>
+    Order Deny,Allow
+    Deny from All
+    Allow from None
+</Directory>
+
+# This configuration prevents mod_security at phpMyAdmin directories from
+# filtering SQL etc.  This may break your mod_security implementation.
+#
+#<IfModule mod_security.c>
+#    <Directory /usr/share/phpMyAdmin/>
+#        SecRuleInheritance Off
+#    </Directory>
+#</IfModule>

install/0.9.7/rhel/httpd-ssl.conf

@@ -0,0 +1,12 @@
+LoadModule ssl_module modules/mod_ssl.so
+
+AddType application/x-x509-ca-cert .crt
+AddType application/x-pkcs7-crl    .crl
+
+SSLPassPhraseDialog     builtin
+SSLSessionCache         shmcb:/var/cache/mod_ssl/scache(512000)
+SSLSessionCacheTimeout  300
+SSLMutex                default
+SSLRandomSeed           startup file:/dev/urandom  256
+SSLRandomSeed           connect builtin
+SSLCryptoDevice         builtin

install/0.9.7/rhel/httpd-status.conf

@@ -0,0 +1,7 @@
+Listen 127.0.0.1:8081
+<Location /server-status>
+    SetHandler server-status
+    Order deny,allow
+    Deny from all
+    Allow from all
+</Location>

install/0.9.7/rhel/httpd-webmail.conf

@@ -0,0 +1,12 @@
+#
+# Round Cube Webmail is a browser-based multilingual IMAP client
+#
+
+Alias /roundcubemail /usr/share/roundcubemail
+Alias /webmail /usr/share/roundcubemail
+
+<Directory /usr/share/roundcubemail/>
+        Order Deny,Allow
+        Deny from all
+        Allow from all
+</Directory>

install/0.9.7/rhel/httpd.conf

@@ -0,0 +1,256 @@
+ServerTokens OS
+ServerRoot "/etc/httpd"
+PidFile run/httpd.pid
+Timeout 30
+KeepAlive Off
+MaxKeepAliveRequests 100
+KeepAliveTimeout 10
+
+<IfModule prefork.c>
+    StartServers       8
+    MinSpareServers    5
+    MaxSpareServers   20
+    ServerLimit      256
+    MaxClients       200
+    MaxRequestsPerChild  4000
+</IfModule>
+
+<IfModule worker.c>
+    StartServers         2
+    MaxClients         200
+    MinSpareThreads     25
+    MaxSpareThreads     75 
+    ThreadsPerChild     25
+    MaxRequestsPerChild  4000
+</IfModule>
+
+<IfModule itk.c>
+    StartServers       8
+    MinSpareServers    5
+    MaxSpareServers   20
+    ServerLimit      256
+    MaxClients       256
+    MaxRequestsPerChild  4000
+</IfModule>
+
+LoadModule auth_basic_module modules/mod_auth_basic.so
+LoadModule auth_digest_module modules/mod_auth_digest.so
+LoadModule authn_file_module modules/mod_authn_file.so
+LoadModule authn_alias_module modules/mod_authn_alias.so
+LoadModule authn_anon_module modules/mod_authn_anon.so
+#LoadModule authn_dbm_module modules/mod_authn_dbm.so
+LoadModule authn_default_module modules/mod_authn_default.so
+LoadModule authz_host_module modules/mod_authz_host.so
+LoadModule authz_user_module modules/mod_authz_user.so
+LoadModule authz_owner_module modules/mod_authz_owner.so
+LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
+#LoadModule authz_dbm_module modules/mod_authz_dbm.so
+LoadModule authz_default_module modules/mod_authz_default.so
+#LoadModule ldap_module modules/mod_ldap.so
+#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
+LoadModule include_module modules/mod_include.so
+LoadModule log_config_module modules/mod_log_config.so
+LoadModule logio_module modules/mod_logio.so
+LoadModule env_module modules/mod_env.so
+LoadModule ext_filter_module modules/mod_ext_filter.so
+LoadModule mime_magic_module modules/mod_mime_magic.so
+LoadModule expires_module modules/mod_expires.so
+LoadModule deflate_module modules/mod_deflate.so
+LoadModule headers_module modules/mod_headers.so
+LoadModule usertrack_module modules/mod_usertrack.so
+LoadModule setenvif_module modules/mod_setenvif.so
+LoadModule mime_module modules/mod_mime.so
+LoadModule dav_module modules/mod_dav.so
+LoadModule status_module modules/mod_status.so
+LoadModule autoindex_module modules/mod_autoindex.so
+#LoadModule info_module modules/mod_info.so
+#LoadModule dav_fs_module modules/mod_dav_fs.so
+LoadModule vhost_alias_module modules/mod_vhost_alias.so
+LoadModule negotiation_module modules/mod_negotiation.so
+LoadModule dir_module modules/mod_dir.so
+LoadModule actions_module modules/mod_actions.so
+#LoadModule speling_module modules/mod_speling.so
+#LoadModule userdir_module modules/mod_userdir.so
+LoadModule alias_module modules/mod_alias.so
+LoadModule rewrite_module modules/mod_rewrite.so
+LoadModule proxy_module modules/mod_proxy.so
+#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
+#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
+#LoadModule proxy_http_module modules/mod_proxy_http.so
+#LoadModule proxy_connect_module modules/mod_proxy_connect.so
+LoadModule cache_module modules/mod_cache.so
+LoadModule suexec_module modules/mod_suexec.so
+#LoadModule disk_cache_module modules/mod_disk_cache.so
+#LoadModule file_cache_module modules/mod_file_cache.so
+#LoadModule mem_cache_module modules/mod_mem_cache.so
+LoadModule cgi_module modules/mod_cgi.so
+LoadModule version_module modules/mod_version.so
+
+Include conf.d/*.conf
+
+ExtendedStatus On
+
+User apache
+Group apache
+
+ServerAdmin root@localhost
+UseCanonicalName Off
+DocumentRoot "/var/www/html"
+<Directory />
+    Options FollowSymLinks
+    AllowOverride None
+</Directory>
+
+<Directory "/var/www/html">
+    Options Indexes FollowSymLinks
+    AllowOverride None
+    Order allow,deny
+    Allow from all
+</Directory>
+
+<IfModule mod_userdir.c>
+    UserDir public_html
+</IfModule>
+
+DirectoryIndex index.php index.htm index.html
+
+AccessFileName .htaccess
+<Files ~ "^\.ht">
+    Order allow,deny
+    Deny from all
+</Files>
+TypesConfig /etc/mime.types
+
+DefaultType text/plain
+
+<IfModule mod_mime_magic.c>
+    MIMEMagicFile conf/magic
+</IfModule>
+
+HostnameLookups Off
+
+ErrorLog logs/error_log
+LogLevel warn
+
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %b" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+LogFormat "%b" bytes
+CustomLog logs/access_log combined
+
+ServerSignature On
+
+Alias /icons/ "/var/www/icons/"
+
+<Directory "/var/www/icons">
+    Options Indexes MultiViews
+    AllowOverride None
+    Order allow,deny
+    Allow from all
+</Directory>
+
+<Directory "/var/www/html">
+    AllowOverride None
+    Order allow,deny
+    Allow from all
+</Directory>
+
+ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
+
+<Directory "/var/www/cgi-bin">
+    AllowOverride None
+    Options ExecCGI
+    Order allow,deny
+    Allow from all
+</Directory>
+
+IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable
+
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+DefaultIcon /icons/unknown.gif
+ReadmeName README.html
+HeaderName HEADER.html
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+AddLanguage ca .ca
+AddLanguage cs .cz .cs
+AddLanguage da .dk
+AddLanguage de .de
+AddLanguage el .el
+AddLanguage en .en
+AddLanguage eo .eo
+AddLanguage es .es
+AddLanguage et .et
+AddLanguage fr .fr
+AddLanguage he .he
+AddLanguage hr .hr
+AddLanguage it .it
+AddLanguage ja .ja
+AddLanguage ko .ko
+AddLanguage ltz .ltz
+AddLanguage nl .nl
+AddLanguage nn .nn
+AddLanguage no .no
+AddLanguage pl .po
+AddLanguage pt .pt
+AddLanguage pt-BR .pt-br
+AddLanguage ru .ru
+AddLanguage sv .sv
+AddLanguage zh-CN .zh-cn
+AddLanguage zh-TW .zh-tw
+LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
+ForceLanguagePriority Prefer Fallback
+
+AddDefaultCharset UTF-8
+
+AddType application/x-compress .Z
+AddType application/x-gzip .gz .tgz
+AddType image/x-icon .ico
+
+AddType text/html .shtml
+AddOutputFilter INCLUDES .shtml
+
+ErrorDocument 403 /error/403.html
+ErrorDocument 404 /error/404.html
+ErrorDocument 500 /error/50x.html
+ErrorDocument 501 /error/50x.html
+ErrorDocument 502 /error/50x.html
+ErrorDocument 503 /error/50x.html
+ErrorDocument 506 /error/50x.html
+
+BrowserMatch "Mozilla/2" nokeepalive
+BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
+BrowserMatch "RealPlayer 4\.0" force-response-1.0
+BrowserMatch "Java/1\.0" force-response-1.0
+BrowserMatch "JDK/1\.0" force-response-1.0
+BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
+BrowserMatch "MS FrontPage" redirect-carefully
+BrowserMatch "^WebDrive" redirect-carefully
+BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
+BrowserMatch "^gnome-vfs/1.0" redirect-carefully
+BrowserMatch "^XML Spy" redirect-carefully
+BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully

install/0.9.7/rhel/httpd.log

@@ -0,0 +1,9 @@
+/var/log/httpd/domains/*log /var/log/httpd/domains/*log {
+    missingok
+    notifempty
+    sharedscripts
+    postrotate
+        /sbin/service httpd reload > /dev/null 2>/dev/null || true
+        [ ! -f /var/run/nginx.pid ] || kill -USR1 `cat /var/run/nginx.pid`
+    endscript
+}

install/0.9.7/rhel/mysql.cnf

@@ -0,0 +1,16 @@
+[mysqld]
+datadir=/var/lib/mysql
+socket=/var/lib/mysql/mysql.sock
+user=mysql
+symbolic-links=0
+max_connections=200
+max_user_connections=30
+wait_timeout=30
+interactive_timeout=50
+long_query_time=5
+#log-queries-not-using-indexes
+#log-slow-queries=/var/log/mysql/log-slow-queries.log
+
+[mysqld_safe]
+log-error=/var/log/mysqld.log
+pid-file=/var/run/mysqld/mysqld.pid

install/0.9.7/rhel/named.conf

@@ -0,0 +1,13 @@
+options {
+    directory		"/var/named";
+    dump-file		"/var/named/data/cache_dump.db";
+    pid-file		"/var/run/named/named.pid";
+    statistics-file	"/var/named/data/named_stats.txt";
+    version		"get lost";
+    allow-transfer	{"none";};
+    recursion		no;
+
+};
+
+include "/etc/rndc.key";
+

install/0.9.7/rhel/nginx-status.conf

@@ -0,0 +1,9 @@
+server {
+    listen       127.0.0.1:8084 default;
+    server_name  _;
+    server_name_in_redirect  off;
+    location / {
+        stub_status on;
+        access_log   off;
+   }
+}

install/0.9.7/rhel/nginx.conf

@@ -0,0 +1,78 @@
+# Server globals
+user                    nginx;
+worker_processes        2;
+error_log               /var/log/nginx/error.log;
+pid                     /var/run/nginx.pid;
+
+
+# Worker config
+events {
+        worker_connections  1024;
+        use                 epoll;
+}
+
+
+http {
+    # Main settings
+    sendfile                        on;
+    tcp_nopush                      on;
+    tcp_nodelay                     on;
+    client_header_timeout           1m;
+    client_body_timeout             1m;
+    client_header_buffer_size       2k;
+    client_body_buffer_size         256k;
+    client_max_body_size            100m;
+    large_client_header_buffers     4   8k;
+    send_timeout                    30;
+    keepalive_timeout               60 60;
+    reset_timedout_connection       on;
+    server_tokens                   off;
+    server_name_in_redirect         off;
+    server_names_hash_max_size      512;
+    server_names_hash_bucket_size   512;
+
+
+    # Log format
+    log_format  main    '$remote_addr - $remote_user [$time_local] $request '
+                        '"$status" $body_bytes_sent "$http_referer" '
+                        '"$http_user_agent" "$http_x_forwarded_for"';
+    log_format  bytes   '$body_bytes_sent';
+    access_log          /var/log/nginx/access.log  main;
+
+
+    # Mime settings
+    include             /etc/nginx/mime.types;
+    default_type        application/octet-stream;
+
+
+    # Compression
+    gzip                on;
+    gzip_comp_level     9;
+    gzip_min_length     512;
+    gzip_buffers        8 64k;
+    gzip_types          text/plain text/css text/javascript
+                        application/x-javascript;
+    gzip_proxied        any;
+
+
+    # Proxy settings
+    proxy_redirect      off;
+    proxy_set_header    Host            $host;
+    proxy_set_header    X-Real-IP       $remote_addr;
+    proxy_set_header    X-Forwarded-For $proxy_add_x_forwarded_for;
+    proxy_pass_header	Set-Cookie;
+    proxy_connect_timeout   90;
+    proxy_send_timeout  90;
+    proxy_read_timeout  90;
+    proxy_buffers       32 4k;
+
+
+    # Error pages
+    error_page          403          /error/403.html;
+    error_page          404          /error/404.html;
+    error_page          502 503 504  /error/50x.html;
+
+
+    # Wildcard include
+    include             /etc/nginx/conf.d/*.conf;
+}

install/0.9.7/rhel/packages/default.pkg

@@ -0,0 +1,16 @@
+TEMPLATE='default'
+WEB_DOMAINS='100'
+WEB_ALIASES='100'
+DNS_DOMAINS='100'
+DNS_RECORDS='100'
+MAIL_DOMAINS='100'
+MAIL_ACCOUNTS='100'
+DATABASES='100'
+CRON_JOBS='100'
+DISK_QUOTA='10000'
+BANDWIDTH='100000'
+NS='ns1.localhost,ns2.localhost'
+SHELL='nologin'
+BACKUPS='3'
+TIME='11:46:50'
+DATE='2012-09-26'

install/0.9.7/rhel/packages/gainsboro.pkg

@@ -0,0 +1,16 @@
+TEMPLATE='default'
+WEB_DOMAINS='10'
+WEB_ALIASES='10'
+DNS_DOMAINS='10'
+DNS_RECORDS='10'
+MAIL_DOMAINS='10'
+MAIL_ACCOUNTS='10'
+DATABASES='10'
+CRON_JOBS='10'
+DISK_QUOTA='10000'
+BANDWIDTH='10000'
+NS='ns1.localhost,ns2.localhost'
+SHELL='nologin'
+BACKUPS='1'
+TIME='11:31:30'
+DATE='2012-07-26'

install/0.9.7/rhel/packages/palegreen.pkg

@@ -0,0 +1,16 @@
+TEMPLATE='hosting'
+WEB_DOMAINS='50'
+WEB_ALIASES='50'
+DNS_DOMAINS='50'
+DNS_RECORDS='50'
+MAIL_DOMAINS='50'
+MAIL_ACCOUNTS='50'
+DATABASES='50'
+CRON_JOBS='50'
+DISK_QUOTA='50000'
+BANDWIDTH='50000'
+NS='ns1.localhost,ns2.localhost'
+SHELL='nologin'
+BACKUPS='5'
+TIME='11:31:31'
+DATE='2012-07-26'

install/0.9.7/rhel/packages/slategrey.pkg

@@ -0,0 +1,16 @@
+TEMPLATE='default'
+WEB_DOMAINS='100'
+WEB_ALIASES='100'
+DNS_DOMAINS='100'
+DNS_RECORDS='100'
+MAIL_DOMAINS='100'
+MAIL_ACCOUNTS='100'
+DATABASES='100'
+CRON_JOBS='100'
+DISK_QUOTA='10000'
+BANDWIDTH='100000'
+NS='ns1.localhost,ns2.localhost'
+SHELL='nologin'
+BACKUPS='3'
+TIME='12:39:13'
+DATE='2012-09-20'

install/0.9.7/rhel/pg_hba.conf

@@ -0,0 +1,11 @@
+# "local" is for Unix domain socket connections only
+local   all         all                               ident
+
+# IPv4 local connections:
+host    all         all         127.0.0.1/32          md5
+
+# IPv6 local connections:
+host    all         all         ::1/128               md5
+
+# Others
+host    all         all         0.0.0.0/0             md5

install/0.9.7/rhel/pma.conf

@@ -0,0 +1,143 @@
+<?php
+/* vim: set expandtab sw=4 ts=4 sts=4: */
+/**
+ * phpMyAdmin sample configuration, you can use it as base for
+ * manual configuration. For easier setup you can use setup/
+ *
+ * All directives are explained in Documentation.html and on phpMyAdmin
+ * wiki <http://wiki.phpmyadmin.net>.
+ *
+ * @package phpMyAdmin
+ */
+
+/*
+ * This is needed for cookie based authentication to encrypt password in
+ * cookie
+ */
+$cfg['blowfish_secret'] = '%blowfish_secret%'; /* YOU MUST FILL IN THIS FOR COOKIE AUTH! */
+
+/*
+ * Servers configuration
+ */
+$i = 0;
+
+/*
+ * First server
+ */
+$i++;
+/* Authentication type */
+$cfg['Servers'][$i]['auth_type'] = 'cookie';
+/* Server parameters */
+$cfg['Servers'][$i]['host'] = 'localhost';
+$cfg['Servers'][$i]['connect_type'] = 'tcp';
+$cfg['Servers'][$i]['compress'] = false;
+/* Select mysqli if your server has it */
+$cfg['Servers'][$i]['extension'] = 'mysql';
+$cfg['Servers'][$i]['AllowNoPassword'] = false;
+
+/*
+ * phpMyAdmin configuration storage settings.
+ */
+
+/* User used to manipulate with storage */
+// $cfg['Servers'][$i]['controluser'] = 'pma';
+// $cfg['Servers'][$i]['controlpass'] = 'pmapass';
+
+/* Storage database and tables */
+// $cfg['Servers'][$i]['pmadb'] = 'phpmyadmin';
+// $cfg['Servers'][$i]['bookmarktable'] = 'pma_bookmark';
+// $cfg['Servers'][$i]['relation'] = 'pma_relation';
+// $cfg['Servers'][$i]['table_info'] = 'pma_table_info';
+// $cfg['Servers'][$i]['table_coords'] = 'pma_table_coords';
+// $cfg['Servers'][$i]['pdf_pages'] = 'pma_pdf_pages';
+// $cfg['Servers'][$i]['column_info'] = 'pma_column_info';
+// $cfg['Servers'][$i]['history'] = 'pma_history';
+// $cfg['Servers'][$i]['tracking'] = 'pma_tracking';
+// $cfg['Servers'][$i]['designer_coords'] = 'pma_designer_coords';
+// $cfg['Servers'][$i]['userconfig'] = 'pma_userconfig';
+/* Contrib / Swekey authentication */
+// $cfg['Servers'][$i]['auth_swekey_config'] = '/etc/swekey-pma.conf';
+
+/*
+ * End of servers configuration
+ */
+
+/*
+ * Directories for saving/loading files from server
+ */
+$cfg['UploadDir'] = '';
+$cfg['SaveDir'] = '';
+
+/**
+ * Defines whether a user should be displayed a "show all (records)"
+ * button in browse mode or not.
+ * default = false
+ */
+//$cfg['ShowAll'] = true;
+
+/**
+ * Number of rows displayed when browsing a result set. If the result
+ * set contains more rows, "Previous" and "Next".
+ * default = 30
+ */
+//$cfg['MaxRows'] = 50;
+
+/**
+ * Use graphically less intense menu tabs
+ * default = false
+ */
+//$cfg['LightTabs'] = true;
+
+/**
+ * disallow editing of binary fields
+ * valid values are:
+ *   false  allow editing
+ *   'blob' allow editing except for BLOB fields
+ *   'all'  disallow editing
+ * default = blob
+ */
+//$cfg['ProtectBinary'] = 'false';
+
+/**
+ * Default language to use, if not browser-defined or user-defined
+ * (you find all languages in the locale folder)
+ * uncomment the desired line:
+ * default = 'en'
+ */
+//$cfg['DefaultLang'] = 'en';
+//$cfg['DefaultLang'] = 'de';
+
+/**
+ * default display direction (horizontal|vertical|horizontalflipped)
+ */
+//$cfg['DefaultDisplay'] = 'vertical';
+
+
+/**
+ * How many columns should be used for table display of a database?
+ * (a value larger than 1 results in some information being hidden)
+ * default = 1
+ */
+//$cfg['PropertiesNumColumns'] = 2;
+
+/**
+ * Set to true if you want DB-based query history.If false, this utilizes
+ * JS-routines to display query history (lost by window close)
+ *
+ * This requires configuration storage enabled, see above.
+ * default = false
+ */
+//$cfg['QueryHistoryDB'] = true;
+
+/**
+ * When using DB-based query history, how many entries should be kept?
+ *
+ * default = 25
+ */
+//$cfg['QueryHistoryMax'] = 100;
+
+/*
+ * You can find more configuration options in Documentation.html
+ * or here: http://wiki.phpmyadmin.net/pma/Config
+ */
+?>

install/0.9.7/rhel/proftpd.conf

@@ -0,0 +1,27 @@
+ServerName                      "FTP"
+ServerIdent                     on "FTP Server ready."
+ServerAdmin                     root@localhost
+DefaultServer                   on
+VRootEngine                     on
+DefaultRoot                     ~ !adm
+VRootAlias                      etc/security/pam_env.conf /etc/security/pam_env.conf
+AuthPAMConfig                   proftpd
+AuthOrder                       mod_auth_pam.c* mod_auth_unix.c
+UseReverseDNS                   off
+User                            nobody
+Group                           nobody
+MaxInstances                    20
+UseSendfile                     off
+LogFormat                       default "%h %l %u %t \"%r\" %s %b"
+LogFormat                       auth    "%v [%P] %h %t \"%r\" %s"
+ListOptions                     -a
+RequireValidShell               off
+
+<Global>
+  Umask                         002
+  IdentLookups                  off
+  AllowOverwrite                yes
+  <Limit ALL SITE_CHMOD>
+    AllowAll
+  </Limit>
+</Global>

install/0.9.7/rhel/roundcube-db.conf

@@ -0,0 +1,66 @@
+<?php
+
+/*
+ +-----------------------------------------------------------------------+
+ | Configuration file for database access                                |
+ |                                                                       |
+ | This file is part of the RoundCube Webmail client                     |
+ | Copyright (C) 2005-2008, RoundCube Dev. - Switzerland                 |
+ | Licensed under the GNU GPL                                            |
+ |                                                                       |
+ +-----------------------------------------------------------------------+
+
+*/
+
+$rcmail_config = array();
+
+// PEAR database DSN for read/write operations
+// format is db_provider://user:password@host/database 
+
+$rcmail_config['db_dsnw'] = 'mysql://roundcube:%password%@localhost/roundcube';
+// postgres example: 'pgsql://roundcube:pass@localhost/roundcubemail';
+
+// PEAR database DSN for read only operations (if empty write database will be used)
+// useful for database replication
+$rcmail_config['db_dsnr'] = '';
+
+// database backend to use (only db or mdb2 are supported)
+//$rcmail_config['db_backend'] = 'mdb2';
+
+// maximum length of a query in bytes
+$rcmail_config['db_max_length'] = 512000;  // 500K
+
+// use persistent db-connections
+// beware this will not "always" work as expected
+// see: http://www.php.net/manual/en/features.persistent-connections.php
+$rcmail_config['db_persistent'] = FALSE;
+
+
+// you can define specific table names used to store webmail data
+$rcmail_config['db_table_users'] = 'users';
+
+$rcmail_config['db_table_identities'] = 'identities';
+
+$rcmail_config['db_table_contacts'] = 'contacts';
+
+$rcmail_config['db_table_session'] = 'session';
+
+$rcmail_config['db_table_cache'] = 'cache';
+
+$rcmail_config['db_table_messages'] = 'messages';
+
+
+// you can define specific sequence names used in PostgreSQL
+$rcmail_config['db_sequence_users'] = 'user_ids';
+
+$rcmail_config['db_sequence_identities'] = 'identity_ids';
+
+$rcmail_config['db_sequence_contacts'] = 'contact_ids';
+
+$rcmail_config['db_sequence_cache'] = 'cache_ids';
+
+$rcmail_config['db_sequence_messages'] = 'message_ids';
+
+
+// end db config file
+?>

install/0.9.7/rhel/roundcube-main.conf

@@ -0,0 +1,293 @@
+<?php
+
+/*
+ +-----------------------------------------------------------------------+
+ | Main configuration file                                               |
+ |                                                                       |
+ | This file is part of the RoundCube Webmail client                     |
+ | Copyright (C) 2005-2008, RoundCube Dev. - Switzerland                 |
+ | Licensed under the GNU GPL                                            |
+ |                                                                       |
+ +-----------------------------------------------------------------------+
+
+*/
+
+$rcmail_config = array();
+
+
+// system error reporting: 1 = log; 2 = report (not implemented yet), 4 = show, 8 = trace
+$rcmail_config['debug_level'] = 1;
+
+// enable caching of messages and mailbox data in the local database.
+// this is recommended if the IMAP server does not run on the same machine
+$rcmail_config['enable_caching'] = TRUE;
+
+// lifetime of message cache
+// possible units: s, m, h, d, w
+$rcmail_config['message_cache_lifetime'] = '10d';
+
+// automatically create a new RoundCube user when log-in the first time.
+// a new user will be created once the IMAP login succeeds.
+// set to false if only registered users can use this service
+$rcmail_config['auto_create_user'] = TRUE;
+
+// the mail host chosen to perform the log-in
+// leave blank to show a textbox at login, give a list of hosts
+// to display a pulldown menu or set one host as string.
+// To use SSL connection, enter ssl://hostname:993
+$rcmail_config['default_host'] = 'localhost';
+
+// TCP port used for IMAP connections
+$rcmail_config['default_port'] = 143;
+
+// Automatically add this domain to user names for login
+// Only for IMAP servers that require full e-mail addresses for login
+// Specify an array with 'host' => 'domain' values to support multiple hosts
+$rcmail_config['username_domain'] = '';
+
+// This domain will be used to form e-mail addresses of new users
+// Specify an array with 'host' => 'domain' values to support multiple hosts
+$rcmail_config['mail_domain'] = '';
+
+// Path to a virtuser table file to resolve user names and e-mail addresses
+$rcmail_config['virtuser_file'] = '';
+
+// Query to resolve user names and e-mail addresses from the database
+// %u will be replaced with the current username for login.
+// The query should select the user's e-mail address as first col
+$rcmail_config['virtuser_query'] = '';
+
+// use this host for sending mails.
+// to use SSL connection, set ssl://smtp.host.com
+// if left blank, the PHP mail() function is used
+$rcmail_config['smtp_server'] = '';
+
+// SMTP port (default is 25; 465 for SSL)
+$rcmail_config['smtp_port'] = 25;
+
+// SMTP username (if required) if you use %u as the username RoundCube
+// will use the current username for login
+$rcmail_config['smtp_user'] = '';
+
+// SMTP password (if required) if you use %p as the password RoundCube
+// will use the current user's password for login
+$rcmail_config['smtp_pass'] = '';
+
+// SMTP AUTH type (DIGEST-MD5, CRAM-MD5, LOGIN, PLAIN or empty to use
+// best server supported one)
+$rcmail_config['smtp_auth_type'] = '';
+
+// SMTP HELO host 
+// Hostname to give to the remote server for SMTP 'HELO' or 'EHLO' messages 
+// Leave this blank and you will get the server variable 'server_name' or 
+// localhost if that isn't defined. 
+$rcmail_config['smtp_helo_host'] = '';
+
+// Log sent messages
+$rcmail_config['smtp_log'] = TRUE;
+
+// these cols are shown in the message list
+// available cols are: subject, from, to, cc, replyto, date, size, encoding
+$rcmail_config['list_cols'] = array('subject', 'from', 'date', 'size');
+
+// relative path to the skin folder
+$rcmail_config['skin_path'] = 'skins/default/';
+
+// includes should be interpreted as PHP files
+$rcmail_config['skin_include_php'] = FALSE;
+
+// use this folder to store temp files (must be writebale for apache user)
+$rcmail_config['temp_dir'] = '${_tmppath}';
+
+// use this folder to store log files (must be writebale for apache user)
+$rcmail_config['log_dir'] = '%{_logdir}/roundcubemail/';
+
+// session lifetime in minutes
+$rcmail_config['session_lifetime'] = 10;
+
+// check client IP in session athorization
+$rcmail_config['ip_check'] = false;
+
+// Use an additional frequently changing cookie to athenticate user sessions.
+// There have been problems reported with this feature.
+$rcmail_config['double_auth'] = false;
+
+// this key is used to encrypt the users imap password which is stored
+// in the session record (and the client cookie if remember password is enabled).
+// please provide a string of exactly 24 chars.
+$rcmail_config['des_key'] = 'RA2OSY7IuUYRgLHA3Mhw1XOi';
+
+// the default locale setting
+$rcmail_config['locale_string'] = 'en';
+
+// use this format for short date display
+$rcmail_config['date_short'] = 'D H:i';
+
+// use this format for detailed date/time formatting
+$rcmail_config['date_long'] = 'd.m.Y H:i';
+
+// use this format for today's date display
+$rcmail_config['date_today'] = 'H:i';
+
+// add this user-agent to message headers when sending
+$rcmail_config['useragent'] = 'RoundCube Webmail/0.1';
+
+// use this name to compose page titles
+$rcmail_config['product_name'] = 'RoundCube Webmail';
+
+// only list folders within this path
+$rcmail_config['imap_root'] = '';
+
+// store draft message is this mailbox
+// leave blank if draft messages should not be stored
+$rcmail_config['drafts_mbox'] = 'Drafts';
+
+// store spam messages in this mailbox
+$rcmail_config['junk_mbox'] = 'Junk';
+
+// store sent message is this mailbox
+// leave blank if sent messages should not be stored
+$rcmail_config['sent_mbox'] = 'Sent';
+
+// move messages to this folder when deleting them
+// leave blank if they should be deleted directly
+$rcmail_config['trash_mbox'] = 'Trash';
+
+// display these folders separately in the mailbox list.
+// these folders will also be displayed with localized names
+$rcmail_config['default_imap_folders'] = array('INBOX', 'Drafts', 'Sent', 'Junk', 'Trash');
+
+// automatically create the above listed default folders on login
+$rcmail_config['create_default_folders'] = FALSE;
+
+// protect the default folders from renames, deletes, and subscription changes
+$rcmail_config['protect_default_folders'] = TRUE;
+
+// Set TRUE if deleted messages should not be displayed
+// This will make the application run slower
+$rcmail_config['skip_deleted'] = FALSE;
+
+// Set true to Mark deleted messages as read as well as deleted
+// False means that a message's read status is not affected by marking it as deleted
+$rcmail_config['read_when_deleted'] = TRUE;
+
+// When a Trash folder is not present and a message is deleted, flag 
+// the message for deletion rather than deleting it immediately.  Setting this to 
+// false causes deleted messages to be permanantly removed if there is no Trash folder
+$rcmail_config['flag_for_deletion'] = TRUE;
+
+// Behavior if a received message requests a message delivery notification (read receipt)
+// 0 = ask the user, 1 = send automatically, 2 = ignore (never send or ask)
+$rcmail_config['mdn_requests'] = 0;
+
+// Use this charset as fallback for message decoding
+$rcmail_config['default_charset'] = 'ISO-8859-1';
+
+// Make use of the built-in spell checker. It is based on GoogieSpell.
+// Since Google only accepts connections over https your PHP installatation
+// requires to be compiled with Open SSL support
+$rcmail_config['enable_spellcheck'] = TRUE;
+
+// For a locally installed Nox Spell Server, please specify the URI to call it.
+// Get Nox Spell Server from http://orangoo.com/labs/?page_id=72
+// Leave empty to use the Google spell checking service, what means
+// that the message content will be sent to Google in order to check spelling
+$rcmail_config['spellcheck_uri'] = '';
+
+// These languages can be selected for spell checking.
+// Configure as a PHP style hash array: array('en'=>'English', 'de'=>'Deutsch');
+// Leave empty for default set of Google spell check languages
+$rcmail_config['spellcheck_languages'] = NULL;
+
+// path to a text file which will be added to each sent message
+// paths are relative to the RoundCube root folder
+$rcmail_config['generic_message_footer'] = '';
+
+// add a received header to outgoing mails containing the creators IP and hostname
+$rcmail_config['http_received_header'] = false;
+
+// this string is used as a delimiter for message headers when sending
+// leave empty for auto-detection
+$rcmail_config['mail_header_delimiter'] = NULL;
+
+// session domain: .example.org
+$rcmail_config['session_domain'] = '';
+
+// in order to enable public ldap search, create a config array
+// like the Verisign example below. if you would like to test, 
+// simply uncomment the Verisign example.
+/** 
+ * example config for Verisign directory
+ *
+ * $rcmail_config['ldap_public']['Verisign'] = array(
+ *  'name'          => 'Verisign.com',
+ *  'hosts'         => array('directory.verisign.com'),
+ *  'port'          => 389,
+ *  'base_dn'       => '',
+ *  'bind_dn'       => '',
+ *  'bind_pass'     => '',
+ *  'ldap_version'  => 3,       // using LDAPv3
+ *  'search_fields' => array('mail', 'cn'),  // fields to search in
+ *  'name_field'    => 'cn',    // this field represents the contact's name
+ *  'email_field'   => 'mail',  // this field represents the contact's e-mail
+ *  'surname_field' => 'sn',    // this field represents the contact's last name
+ *  'firstname_field' => 'gn',  // this field represents the contact's first name
+ *  'scope'         => 'sub',   // search mode: sub|base|list
+ *  'filter'        => '',      // used for basic listing (if not empty) and will be &'d with search queries. example: status=act
+ *  'fuzzy_search'  => true);   // server allows wildcard search
+ */
+
+// don't allow these settings to be overriden by the user
+$rcmail_config['dont_override'] = array();
+
+// list of configuration option names that need to be available in Javascript.
+$rcmail_config['javascript_config'] = array('read_when_deleted', 'flag_for_deletion');
+
+// try to load host-specific configuration
+$rcmail_config['include_host_config'] = false;
+
+// THIS OPTION WILL ALLOW THE INSTALLER TO RUN AND CAN EXPOSE SENSITIVE CONFIG DATA.
+// ONLY ENABLE IT IF YOU'RE REALLY SURE WHAT YOU'RE DOING!
+$rcmail_config['enable_installer'] = false;
+
+
+/***** these settings can be overwritten by user's preferences *****/
+
+// show up to X items in list view
+$rcmail_config['pagesize'] = 40;
+
+// use this timezone to display date/time
+$rcmail_config['timezone'] = intval(date('O'))/100 - date('I');
+
+// is daylight saving On?
+$rcmail_config['dst_active'] = (bool)date('I');
+
+// prefer displaying HTML messages
+$rcmail_config['prefer_html'] = TRUE;
+
+// compose html formatted messages by default
+$rcmail_config['htmleditor'] = FALSE;
+
+// show pretty dates as standard
+$rcmail_config['prettydate'] = TRUE;
+
+// default sort col
+$rcmail_config['message_sort_col'] = 'date';
+
+// default sort order
+$rcmail_config['message_sort_order'] = 'DESC';
+
+// save compose message every 300 seconds (5min)
+$rcmail_config['draft_autosave'] = 300;
+
+// default setting if preview pane is enabled
+$rcmail_config['preview_pane'] = FALSE;
+
+// don't let users set pagesize to more than this value if set
+$rcmail_config['max_pagesize'] = 200;
+
+// mime magic database
+$rcmail_config['mime_magic'] = '/usr/share/misc/magic';
+
+// end of config file
+?>

install/0.9.7/rhel/sudoers.conf

@@ -0,0 +1,98 @@
+## Sudoers allows particular users to run various commands as
+## the root user, without needing the root password.
+##
+## Examples are provided at the bottom of the file for collections
+## of related commands, which can then be delegated out to particular
+## users or groups.
+## 
+## This file must be edited with the 'visudo' command.
+
+## Host Aliases
+## Groups of machines. You may prefer to use hostnames (perhap using 
+## wildcards for entire domains) or IP addresses instead.
+# Host_Alias     FILESERVERS = fs1, fs2
+# Host_Alias     MAILSERVERS = smtp, smtp2
+
+## User Aliases
+## These aren't often necessary, as you can use regular groups
+## (ie, from files, LDAP, NIS, etc) in this file - just use %groupname 
+## rather than USERALIAS
+# User_Alias ADMINS = jsmith, mikem
+
+
+## Command Aliases
+## These are groups of related commands...
+
+## Networking
+#Cmnd_Alias NETWORKING = /sbin/route, /sbin/ifconfig, /bin/ping, /sbin/dhclient, /usr/bin/net, /sbin/iptables, /usr/bin/rfcomm, /usr/bin/wvdial, /sbin/iwconfig, /sbin/mii-tool
+
+## Installation and management of software
+#Cmnd_Alias SOFTWARE = /bin/rpm, /usr/bin/up2date, /usr/bin/yum
+
+## Services
+#Cmnd_Alias SERVICES = /sbin/service, /sbin/chkconfig
+
+## Updating the locate database
+#Cmnd_Alias LOCATE = /usr/bin/updatedb
+
+## Storage
+#Cmnd_Alias STORAGE = /sbin/fdisk, /sbin/sfdisk, /sbin/parted, /sbin/partprobe, /bin/mount, /bin/umount
+
+## Delegating permissions
+#Cmnd_Alias DELEGATING = /usr/sbin/visudo, /bin/chown, /bin/chmod, /bin/chgrp 
+
+## Processes
+#Cmnd_Alias PROCESSES = /bin/nice, /bin/kill, /usr/bin/kill, /usr/bin/killall
+
+## Drivers
+#Cmnd_Alias DRIVERS = /sbin/modprobe
+
+# Defaults specification
+
+#
+# Disable "ssh hostname sudo <cmd>", because it will show the password in clear. 
+#         You have to run "ssh -t hostname sudo <cmd>".
+#
+#Defaults    requiretty
+
+Defaults    env_reset
+Defaults    env_keep = "COLORS DISPLAY HOSTNAME HISTSIZE INPUTRC KDEDIR \
+                        LS_COLORS MAIL PS1 PS2 QTDIR USERNAME \
+                        LANG LC_ADDRESS LC_CTYPE LC_COLLATE LC_IDENTIFICATION \
+                        LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC \
+                        LC_PAPER LC_TELEPHONE LC_TIME LC_ALL LANGUAGE LINGUAS \
+                        _XKB_CHARSET XAUTHORITY VESTA"
+
+
+# Disable syslog loggging
+Defaults !syslog
+
+## Next comes the main part: which users can run what software on 
+## which machines (the sudoers file can be shared between multiple
+## systems).
+## Syntax:
+##
+##      user    MACHINE=COMMANDS
+##
+## The COMMANDS section may have other options added to it.
+##
+## Allow root to run any commands anywhere 
+root    ALL=(ALL)       ALL
+
+## Allows members of the 'sys' group to run networking, software, 
+## service management apps and more.
+# %sys ALL = NETWORKING, SOFTWARE, SERVICES, STORAGE, DELEGATING, PROCESSES, LOCATE, DRIVERS
+
+## Allows people in group wheel to run all commands
+# %wheel        ALL=(ALL)       ALL
+
+## Same thing without a password
+# %wheel        ALL=(ALL)       NOPASSWD: ALL
+
+## Allows members of the users group to mount and unmount the 
+## cdrom as root
+# %users  ALL=/sbin/mount /mnt/cdrom, /sbin/umount /mnt/cdrom
+
+## Allows members of the users group to shutdown this system
+# %users  localhost=/sbin/shutdown -h now
+admin   ALL=NOPASSWD:/usr/local/vesta/bin/*

install/0.9.7/rhel/templates/dns/default.tpl

@@ -0,0 +1,9 @@
+ID='1' RECORD='@' TYPE='NS' PRIORITY='' VALUE='%ns1%.' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='2' RECORD='@' TYPE='NS' PRIORITY='' VALUE='%ns2%.' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='3' RECORD='@' TYPE='A' PRIORITY='' VALUE='%ip%' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='4' RECORD='mail' TYPE='A' PRIORITY='' VALUE='%ip%' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='5' RECORD='www' TYPE='A' PRIORITY='' VALUE='%ip%' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='6' RECORD='pop' TYPE='A' PRIORITY='' VALUE='%ip%' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='7' RECORD='ftp' TYPE='A' PRIORITY='' VALUE='%ip%' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='8' RECORD='@' TYPE='MX' PRIORITY='10' VALUE='mail' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='9' RECORD='@' TYPE='TXT' PRIORITY='' VALUE='"v=spf1 a mx ip4:%ip% ?all"' SUSPENDED='no' TIME='%time%' DATE='%date%'

install/0.9.7/rhel/templates/dns/gmail.tpl

@@ -0,0 +1,14 @@
+ID='1' RECORD='@' TYPE='NS' PRIORITY='' VALUE='%ns1%.' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='2' RECORD='@' TYPE='NS' PRIORITY='' VALUE='%ns2%.' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='3' RECORD='@' TYPE='A' PRIORITY='' VALUE='%ip%' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='4' RECORD='ftp' TYPE='A' PRIORITY='' VALUE='%ip%' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='5' RECORD='localhost' TYPE='A' PRIORITY='' VALUE='127.0.0.1' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='6' RECORD='mail' TYPE='CNAME' PRIORITY='' VALUE='ghs.google.com.' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='7' RECORD='pop' TYPE='A' PRIORITY='' VALUE='%ip%' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='8' RECORD='www' TYPE='A' PRIORITY='' VALUE='%ip%' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='9' RECORD='@' TYPE='MX' PRIORITY='1' VALUE='ASPMX.L.GOOGLE.COM.' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='10' RECORD='@' TYPE='MX' PRIORITY='5' VALUE='ALT1.ASPMX.L.GOOGLE.COM.' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='11' RECORD='@' TYPE='MX' PRIORITY='5' VALUE='ALT2.ASPMX.L.GOOGLE.COM.' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='12' RECORD='@' TYPE='MX' PRIORITY='10' VALUE='ASPMX2.GOOGLEMAIL.COM.' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='13' RECORD='@' TYPE='MX' PRIORITY='10' VALUE='ASPMX3.GOOGLEMAIL.COM.' SUSPENDED='no' TIME='%time%' DATE='%date%'
+ID='14' RECORD='@' TYPE='TXT' PRIORITY='' VALUE='"v=spf1 a mx ip4:%ip% ?all"' SUSPENDED='no' TIME='%time%' DATE='%date%'

install/0.9.7/rhel/templates/web/apache_default.stpl

@@ -0,0 +1,45 @@
+<VirtualHost %ip%:%web_ssl_port%>
+
+    ServerName %domain_idn%
+    %alias_string%
+    ServerAdmin %email%
+    DocumentRoot %sdocroot%
+    %cgi%ScriptAlias /cgi-bin/ %home%/%user%/web/%domain%/cgi-bin/
+    Alias /vstats/ %home%/%user%/web/%domain%/stats/
+    Alias /error/ %home%/%user%/web/%domain%/document_errors/
+    SuexecUserGroup %user% %group%
+    CustomLog /var/log/httpd/domains/%domain%.bytes bytes
+    CustomLog /var/log/httpd/domains/%domain%.log combined
+    %elog%ErrorLog /var/log/httpd/domains/%domain%.error.log
+    <Directory %sdocroot%>
+        AllowOverride All
+        SSLRequireSSL
+        Options +Includes -Indexes %cgi_option%
+        php_admin_value upload_tmp_dir %home%/%user%/tmp
+        php_admin_flag safe_mode off
+        php_admin_value session.save_path %home%/%user%/tmp
+        php_admin_value sendmail_path '/usr/sbin/sendmail -t -i -f %email%'
+    </Directory>
+    <Directory %home%/%user%/web/%domain%/stats>
+        AllowOverride All
+    </Directory>
+    php_admin_value open_basedir none
+    SSLEngine on
+    SSLVerifyClient none
+    SSLCertificateFile %ssl_crt%
+    SSLCertificateKeyFile %ssl_key%
+    %ssl_ca_str%SSLCertificateChainFile %ssl_ca%
+
+    <IfModule mod_ruid2.c>
+        RMode config
+        RUidGid %user% %group%
+        RGroups apache
+    </IfModule>
+    <IfModule itk.c>
+        AssignUserID %user% %group%
+    </IfModule>
+
+    Include %home%/%user%/conf/shttpd.%domain%.conf*
+
+</VirtualHost>
+

install/0.9.7/rhel/templates/web/apache_default.tpl

@@ -0,0 +1,39 @@
+<VirtualHost %ip%:%web_port%>
+
+    ServerName %domain_idn%
+    %alias_string%
+    ServerAdmin %email%
+    DocumentRoot %docroot%
+    %cgi%ScriptAlias /cgi-bin/ %home%/%user%/web/%domain%/cgi-bin/
+    Alias /vstats/ %home%/%user%/web/%domain%/stats/
+    Alias /error/ %home%/%user%/web/%domain%/document_errors/
+    SuexecUserGroup %user% %group%
+    CustomLog /var/log/httpd/domains/%domain%.bytes bytes
+    CustomLog /var/log/httpd/domains/%domain%.log combined
+    %elog%ErrorLog /var/log/httpd/domains/%domain%.error.log
+    <Directory %docroot%>
+        AllowOverride All
+        Options +Includes -Indexes %cgi_option%
+        php_admin_value upload_tmp_dir %home%/%user%/tmp
+        php_admin_flag safe_mode off
+        php_admin_value session.save_path %home%/%user%/tmp
+        php_admin_value sendmail_path '/usr/sbin/sendmail -t -i -f %email%'
+    </Directory>
+    <Directory %home%/%user%/web/%domain%/stats>
+        AllowOverride All
+    </Directory>
+    php_admin_value open_basedir none
+
+    <IfModule mod_ruid2.c>
+        RMode config
+        RUidGid %user% %group%
+        RGroups apache
+    </IfModule>
+    <IfModule itk.c>
+        AssignUserID %user% %group%
+    </IfModule>
+
+    Include %home%/%user%/conf/httpd.%domain%.conf*
+
+</VirtualHost>
+

install/0.9.7/rhel/templates/web/apache_hosting.stpl

@@ -0,0 +1,49 @@
+<VirtualHost %ip%:%web_ssl_port%>
+
+    ServerName %domain_idn%
+    %alias_string%
+    ServerAdmin %email%
+    DocumentRoot %sdocroot%
+    %cgi%ScriptAlias /cgi-bin/ %home%/%user%/web/%domain%/cgi-bin/
+    Alias /vstats/ %home%/%user%/web/%domain%/stats/
+    Alias /error/ %home%/%user%/web/%domain%/document_errors/
+    SuexecUserGroup %user% %group%
+    CustomLog /var/log/httpd/domains/%domain%.bytes bytes
+    CustomLog /var/log/httpd/domains/%domain%.log combined
+    %elog%ErrorLog /var/log/httpd/domains/%domain%.error.log
+    <Directory %sdocroot%>
+        AllowOverride AuthConfig FileInfo Indexes Limit
+        SSLRequireSSL
+        Options +Includes -Indexes %cgi_option%
+        php_admin_value upload_tmp_dir %home%/%user%/tmp
+        php_admin_value upload_max_filesize 10M
+        php_admin_value max_execution_time 20
+        php_admin_value post_max_size  8M
+        php_admin_value memory_limit 32M
+        php_admin_flag mysql.allow_persistent  off
+        php_admin_flag safe_mode off
+        php_admin_value session.save_path %home%/%user%/tmp
+        php_admin_value sendmail_path '/usr/sbin/sendmail -t -i -f %email%'
+    </Directory>
+    <Directory %home%/%user%/web/%domain%/stats>
+        AllowOverride All
+    </Directory>
+    php_admin_value open_basedir %home%/%user%/web:%home%/%user%/tmp:/bin:/usr/bin:/usr/local/bin:/var/www/html:/tmp:/usr/share/roundcubemail/:/usr/share/phpMyAdmin
+    SSLEngine on
+    SSLVerifyClient none
+    SSLCertificateFile %ssl_crt%
+    SSLCertificateKeyFile %ssl_key%
+    %ssl_ca_str%SSLCertificateChainFile %ssl_ca%
+    <IfModule mod_ruid2.c>
+        RMode config
+        RUidGid %user% %group%
+        RGroups apache
+    </IfModule>
+    <IfModule itk.c>
+        AssignUserID %user% %group%
+    </IfModule>
+
+    Include %home%/%user%/conf/shttpd.%domain%.conf*
+
+</VirtualHost>
+

install/0.9.7/rhel/templates/web/apache_hosting.tpl

@@ -0,0 +1,43 @@
+<VirtualHost %ip%:%web_port%>
+
+    ServerName %domain_idn%
+    %alias_string%
+    ServerAdmin %email%
+    DocumentRoot %docroot%
+    %cgi%ScriptAlias /cgi-bin/ %home%/%user%/web/%domain%/cgi-bin/
+    Alias /vstats/ %home%/%user%/web/%domain%/stats/
+    Alias /error/ %home%/%user%/web/%domain%/document_errors/
+    SuexecUserGroup %user% %group%
+    CustomLog /var/log/httpd/domains/%domain%.bytes bytes
+    CustomLog /var/log/httpd/domains/%domain%.log combined
+    %elog%ErrorLog /var/log/httpd/domains/%domain%.error.log
+    <Directory %docroot%>
+        AllowOverride AuthConfig FileInfo Indexes Limit
+        Options +Includes -Indexes %cgi_option%
+        php_admin_value upload_tmp_dir %home%/%user%/tmp
+        php_admin_value upload_max_filesize 10M
+        php_admin_value max_execution_time 20
+        php_admin_value post_max_size  8M
+        php_admin_value memory_limit 32M
+        php_admin_flag mysql.allow_persistent  off
+        php_admin_flag safe_mode off
+        php_admin_value session.save_path %home%/%user%/tmp
+        php_admin_value sendmail_path '/usr/sbin/sendmail -t -i -f %email%'
+    </Directory>
+    <Directory %home%/%user%/web/%domain%/stats>
+        AllowOverride All
+    </Directory>
+    php_admin_value open_basedir %home%/%user%/web:%home%/%user%/tmp:/bin:/usr/bin:/usr/local/bin:/var/www/html:/tmp:/usr/share/roundcubemail/:/usr/share/phpMyAdmin
+    <IfModule mod_ruid2.c>
+        RMode config
+        RUidGid %user% %group%
+        RGroups apache
+    </IfModule>
+    <IfModule itk.c>
+        AssignUserID %user% %group%
+    </IfModule>
+
+    Include %home%/%user%/conf/httpd.%domain%.conf*
+
+</VirtualHost>
+

install/0.9.7/rhel/templates/web/apache_phpcgi.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+# Adding php wrapper
+user="$1"
+domain="$2"
+ip="$3"
+home_dir="$4"
+docroot="$5"
+
+wrapper_script='#!/usr/bin/php-cgi -cphp5-cgi.ini'
+wrapper_file="$home_dir/$user/web/$domain/cgi-bin/php"
+
+echo "$wrapper_script" > $wrapper_file
+chown $user:$user $wrapper_file
+chmod -f 751 $wrapper_file
+
+exit 0

install/0.9.7/rhel/templates/web/apache_phpcgi.stpl

@@ -0,0 +1,34 @@
+<VirtualHost %ip%:%web_ssl_port%>
+
+    ServerName %domain_idn%
+    %alias_string%
+    ServerAdmin %email%
+    DocumentRoot %sdocroot%
+    %cgi%ScriptAlias /cgi-bin/ %home%/%user%/web/%domain%/cgi-bin/
+    Alias /vstats/ %home%/%user%/web/%domain%/stats/
+    Alias /error/ %home%/%user%/web/%domain%/document_errors/
+    SuexecUserGroup %user% %group%
+    CustomLog /var/log/httpd/domains/%domain%.bytes bytes
+    CustomLog /var/log/httpd/domains/%domain%.log combined
+    %elog%ErrorLog /var/log/httpd/domains/%domain%.error.log
+    <Directory %sdocroot%>
+        AllowOverride AuthConfig FileInfo Indexes Limit
+        SSLRequireSSL
+        Options +Includes -Indexes %cgi_option%
+        php_admin_flag engine off
+        Action phpcgi-script /cgi-bin/php
+        AddHandler phpcgi-script .php
+    </Directory>
+    <Directory %home%/%user%/web/%domain%/stats>
+        AllowOverride All
+    </Directory>
+    SSLEngine on
+    SSLVerifyClient none
+    SSLCertificateFile %ssl_crt%
+    SSLCertificateKeyFile %ssl_key%
+    %ssl_ca_str%SSLCertificateChainFile %ssl_ca%
+
+    Include %home%/%user%/conf/shttpd.%domain%.conf*
+
+</VirtualHost>
+

install/0.9.7/rhel/templates/web/apache_phpcgi.tpl

@@ -0,0 +1,27 @@
+<VirtualHost %ip%:%web_port%>
+
+    ServerName %domain_idn%
+    %alias_string%
+    ServerAdmin %email%
+    DocumentRoot %docroot%
+    %cgi%ScriptAlias /cgi-bin/ %home%/%user%/web/%domain%/cgi-bin/
+    Alias /vstats/ %home%/%user%/web/%domain%/stats/
+    Alias /error/ %home%/%user%/web/%domain%/document_errors/
+    SuexecUserGroup %user% %group%
+    CustomLog /var/log/httpd/domains/%domain%.bytes bytes
+    CustomLog /var/log/httpd/domains/%domain%.log combined
+    %elog%ErrorLog /var/log/httpd/domains/%domain%.error.log
+    <Directory %docroot%>
+        AllowOverride AuthConfig FileInfo Indexes Limit
+        Options +Includes -Indexes %cgi_option%
+        php_admin_flag engine off
+        Action phpcgi-script /cgi-bin/php
+        AddHandler phpcgi-script .php
+    </Directory>
+    <Directory %home%/%user%/web/%domain%/stats>
+        AllowOverride All
+    </Directory>
+    Include %home%/%user%/conf/httpd.%domain%.conf*
+
+</VirtualHost>
+

install/0.9.7/rhel/templates/web/apache_phpfcgid.sh

@@ -0,0 +1,22 @@
+#!/bin/bash
+# Adding php wrapper
+user="$1"
+domain="$2"
+ip="$3"
+home_dir="$4"
+docroot="$5"
+
+wrapper_script="#!/bin/sh
+PHPRC=/etc/
+export PHPRC
+export PHP_FCGI_MAX_REQUESTS=1000
+export PHP_FCGI_CHILDREN=8
+exec /usr/bin/php-cgi
+"
+wrapper_file="$home_dir/$user/web/$domain/cgi-bin/fcgi-starter"
+
+echo "$wrapper_script" > $wrapper_file
+chown $user:$user $wrapper_file
+chmod -f 751 $wrapper_file
+
+exit 0

install/0.9.7/rhel/templates/web/apache_phpfcgid.stpl

@@ -0,0 +1,35 @@
+<VirtualHost %ip%:%web_ssl_port%>
+
+    ServerName %domain_idn%
+    %alias_string%
+    ServerAdmin %email%
+    DocumentRoot %sdocroot%
+    %cgi%ScriptAlias /cgi-bin/ %home%/%user%/web/%domain%/cgi-bin/
+    Alias /vstats/ %home%/%user%/web/%domain%/stats/
+    Alias /error/ %home%/%user%/web/%domain%/document_errors/
+    SuexecUserGroup %user% %group%
+    CustomLog /var/log/httpd/domains/%domain%.bytes bytes
+    CustomLog /var/log/httpd/domains/%domain%.log combined
+    %elog%ErrorLog /var/log/httpd/domains/%domain%.error.log
+    <Directory %sdocroot%>
+        AllowOverride AuthConfig FileInfo Indexes Limit
+        SSLRequireSSL
+        Options +Includes -Indexes %cgi_option%
+        php_admin_flag engine off
+        AddHandler fcgid-script .php
+        FCGIWrapper %home%/%user%/web/%domain%/cgi-bin/fcgi-starter .php
+    </Directory>
+    <Directory %home%/%user%/web/%domain%/stats>
+        AllowOverride All
+    </Directory>
+    php_admin_value open_basedir none
+    SSLEngine on
+    SSLVerifyClient none
+    SSLCertificateFile %ssl_crt%
+    SSLCertificateKeyFile %ssl_key%
+    %ssl_ca_str%SSLCertificateChainFile %ssl_ca%
+
+    Include %home%/%user%/conf/shttpd.%domain%.conf*
+
+</VirtualHost>
+

install/0.9.7/rhel/templates/web/apache_phpfcgid.tpl

@@ -0,0 +1,27 @@
+<VirtualHost %ip%:%web_port%>
+
+    ServerName %domain_idn%
+    %alias_string%
+    ServerAdmin %email%
+    DocumentRoot %docroot%
+    %cgi%ScriptAlias /cgi-bin/ %home%/%user%/web/%domain%/cgi-bin/
+    Alias /vstats/ %home%/%user%/web/%domain%/stats/
+    Alias /error/ %home%/%user%/web/%domain%/document_errors/
+    SuexecUserGroup %user% %group%
+    CustomLog /var/log/httpd/domains/%domain%.bytes bytes
+    CustomLog /var/log/httpd/domains/%domain%.log combined
+    %elog%ErrorLog /var/log/httpd/domains/%domain%.error.log
+    <Directory %docroot%>
+        AllowOverride AuthConfig FileInfo Indexes Limit
+        Options +Includes -Indexes %cgi_option%
+        php_admin_flag engine off
+        AddHandler fcgid-script .php
+        FCGIWrapper %home%/%user%/web/%domain%/cgi-bin/fcgi-starter .php
+    </Directory>
+    <Directory %home%/%user%/web/%domain%/stats>
+        AllowOverride All
+    </Directory>
+    Include %home%/%user%/conf/httpd.%domain%.conf*
+
+</VirtualHost>
+

install/0.9.7/rhel/templates/web/awstats.tpl

@@ -0,0 +1,133 @@
+LogFile="/var/log/httpd/domains/%domain%.log"
+LogType=W
+LogFormat=1
+LogSeparator=" "
+SiteDomain="%domain_idn%"
+HostAliases="%alias_idn%"
+DirData="%home%/%user%/web/%domain%/stats"
+DirCgi="/vstats"
+DirIcons="/vstats/icon"
+AllowToUpdateStatsFromBrowser=0
+AllowFullYearView=2
+EnableLockForUpdate=1
+DNSStaticCacheFile="dnscache.txt"
+DNSLastUpdateCacheFile="dnscachelastupdate.txt"
+SkipDNSLookupFor=""
+AllowAccessFromWebToAuthenticatedUsersOnly=0
+AllowAccessFromWebToFollowingAuthenticatedUsers=""
+AllowAccessFromWebToFollowingIPAddresses=""
+CreateDirDataIfNotExists=0
+BuildHistoryFormat=text
+BuildReportFormat=html
+SaveDatabaseFilesWithPermissionsForEveryone=0
+PurgeLogFile=0
+ArchiveLogRecords=0
+KeepBackupOfHistoricFiles=1
+DefaultFile="index.php index.html"
+SkipHosts="127.0.0.1
+SkipUserAgents=""
+SkipFiles=""
+SkipReferrersBlackList=""
+OnlyHosts=""
+OnlyUserAgents=""
+OnlyUsers=""
+OnlyFiles=""
+NotPageList="css js class gif jpg jpeg png bmp ico rss xml swf"
+ValidHTTPCodes="200 304"
+ValidSMTPCodes="1 250"
+AuthenticatedUsersNotCaseSensitive=0
+URLNotCaseSensitive=0
+URLWithAnchor=0
+URLQuerySeparators="?;"
+URLWithQuery=0
+URLWithQueryWithOnlyFollowingParameters=""
+URLWithQueryWithoutFollowingParameters=""
+URLReferrerWithQuery=0
+WarningMessages=1
+ErrorMessages=""
+DebugMessages=0
+NbOfLinesForCorruptedLog=50
+WrapperScript=""
+DecodeUA=0
+MiscTrackerUrl="/js/awstats_misc_tracker.js"
+UseFramesWhenCGI=1
+DetailedReportsOnNewWindows=1
+Expires=3600
+MaxRowsInHTMLOutput=1000
+Lang="auto"
+DirLang="./lang"
+ShowMenu=1
+ShowSummary=UVPHB
+ShowMonthStats=UVPHB
+ShowDaysOfMonthStats=VPHB
+ShowDaysOfWeekStats=PHB
+ShowHoursStats=PHB
+ShowDomainsStats=PHB
+ShowHostsStats=PHBL
+ShowAuthenticatedUsers=0
+ShowRobotsStats=HBL
+ShowWormsStats=0
+ShowEMailSenders=0
+ShowEMailReceivers=0
+ShowSessionsStats=1
+ShowPagesStats=PBEX
+ShowFileTypesStats=HB
+ShowFileSizesStats=0
+ShowDownloadsStats=HB
+ShowOSStats=1
+ShowBrowsersStats=1
+ShowScreenSizeStats=0
+ShowOriginStats=PH
+ShowKeyphrasesStats=1
+ShowKeywordsStats=1
+ShowMiscStats=a
+ShowHTTPErrorsStats=1
+ShowSMTPErrorsStats=0
+ShowClusterStats=0
+AddDataArrayMonthStats=1
+AddDataArrayShowDaysOfMonthStats=1
+AddDataArrayShowDaysOfWeekStats=1
+AddDataArrayShowHoursStats=1
+IncludeInternalLinksInOriginSection=0
+MaxNbOfDomain = 10
+MinHitDomain  = 1
+MaxNbOfHostsShown = 10
+MinHitHost    = 1
+MaxNbOfLoginShown = 10
+MinHitLogin   = 1
+MaxNbOfRobotShown = 10
+MinHitRobot   = 1
+MaxNbOfDownloadsShown = 10
+MinHitDownloads = 1
+MaxNbOfPageShown = 10
+MinHitFile    = 1
+MaxNbOfOsShown = 10
+MinHitOs      = 1
+MaxNbOfBrowsersShown = 10
+MinHitBrowser = 1
+MaxNbOfScreenSizesShown = 5
+MinHitScreenSize = 1
+MaxNbOfWindowSizesShown = 5
+MinHitWindowSize = 1
+MaxNbOfRefererShown = 10
+MinHitRefer   = 1
+MaxNbOfKeyphrasesShown = 10
+MinHitKeyphrase = 1
+MaxNbOfKeywordsShown = 10
+MinHitKeyword = 1
+MaxNbOfEMailsShown = 20
+MinHitEMail   = 1
+FirstDayOfWeek=0
+ShowFlagLinks=""
+ShowLinksOnUrl=1
+UseHTTPSLinkForUrl=""
+MaxLengthOfShownURL=64
+HTMLHeadSection=""
+HTMLEndSection=""
+MetaRobot=0
+Logo="awstats_logo6.png"
+LogoLink="http://awstats.sourceforge.net"
+BarWidth   = 260
+BarHeight  = 90
+StyleSheet=""
+ExtraTrackedRowsLimit=500

install/0.9.7/rhel/templates/web/awstats_index.tpl

@@ -0,0 +1,10 @@
+<html>
+<head>
+    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
+    <title>Awstats log analyzer </title>
+</head>
+<frameset rows="60,*" cols="*">
+    <frame src="nav.html" name="nav" scrolling="no" noresize>
+    <frame src="%month%/index.html" name="stats">
+</frameset>
+</html>

install/0.9.7/rhel/templates/web/awstats_nav.tpl

@@ -0,0 +1,23 @@
+<html>
+<head>
+    <title>Awstats navigation</title>
+    <script language="javascript">
+        function change() {
+            top.stats.location= document.period.select.value + '/';
+        }
+    </script>
+</head>
+<body>
+<table width="100%" border="0" cellspacing="0" cellpadding="0">
+<tr>
+    <td><img src="logo.png" alt="vesta"></td>
+    <td><form name="period" action="" method="get">
+        <select name="select" ONCHANGE="change()">
+%select_month%
+        </select>
+    </form>
+    </td>
+</tr>
+</table>
+</body>
+</html>

install/0.9.7/rhel/templates/web/email_reset_password.tpl

@@ -0,0 +1,25 @@
+<div lang="en" style="background-color:#fff;color:#222">  
+<a target="_blank" href="" style="color:#FFF">
+    <img width="81" height="22" style="display:block;border:0" src="http://vestacp.com/i/logo.png" alt="Twitter">
+</a>  
+<div style="font-family:'Helvetica Neue', Arial, Helvetica, sans-serif;font-size:13px;margin:14px">
+<h2 style="font-family:'Helvetica Neue', Arial, Helvetica, sans-serif;margin:0 0 16px;font-size:18px;font-weight:normal">
+    Vesta received a request to reset the password for your account %FIRSTNAME% %LASTNAME% (%LOGIN%)?
+</h2>
+<p>
+    If you want to reset your password, click on the link below (or copy and paste the URL into your browser):<br>
+    <a target="_blank" href="%LINK%"></a>
+</p>
+<p>
+    If you don't want to reset your password, please ignore this message.
+    Your password will not be reset.
+    If you have any concerns, please contact us at support@vestacp.com.
+</p>
+<p style="font-family:'Helvetica Neue', Arial, Helvetica, sans-serif;font-size:13px;line-height:18px;border-bottom:1px solid rgb(238, 238, 238);padding-bottom:10px;margin:0 0 10px">
+    <span style="font:italic 13px Georgia,serif;color:rgb(102, 102, 102)">VestaCP</span>
+</p>
+<p style="font-family:'Helvetica Neue', Arial, Helvetica, sans-serif;margin-top:5px;font-size:10px;color:#888888">
+    Please do not reply to this message; it was sent from an unmonitored email address.      
+</p>
+</div>
+</div>

install/0.9.7/rhel/templates/web/ngingx.ip.tpl

@@ -0,0 +1,9 @@
+server {
+    listen       %ip%:%proxy_port% default;
+    server_name  _;
+    #access_log  /var/log/nginx/%ip%.log main;
+    location / {
+        proxy_pass  http://%ip%:%web_port%;
+   }
+}
+

install/0.9.7/rhel/templates/web/nginx_default.stpl

@@ -0,0 +1,36 @@
+server {
+    listen      %ip%:%proxy_ssl_port%;
+    server_name %domain_idn% %alias_idn%;
+    ssl         on;
+    ssl_certificate      %ssl_pem%;
+    ssl_certificate_key  %ssl_key%;
+    %elog%error_log  /var/log/httpd/domains/%domain%.error.log error;
+
+    location / {
+        proxy_pass      https://%ip%:%web_ssl_port%;
+        location ~* ^.+\.(%nginx_extentions%)$ {
+            root           %sdocroot%;
+            access_log     /var/log/httpd/domains/%domain%.log combined;
+            access_log     /var/log/httpd/domains/%domain%.bytes bytes;
+            expires        max;
+            try_files      $uri @fallback;
+        }
+    }
+
+    location /error/ {
+        alias   %home%/%user%/web/%domain%/document_errors/;
+    }
+
+    location @fallback {
+        proxy_pass      https://%ip%:%web_ssl_port%;
+    }
+
+    location ~ /\.ht    {return 404;}
+    location ~ /\.svn/  {return 404;}
+    location ~ /\.git/  {return 404;}
+    location ~ /\.hg/   {return 404;}
+    location ~ /\.bzr/  {return 404;}
+
+    include %home%/%user%/conf/snginx.%domain%.conf*;
+}
+

install/0.9.7/rhel/templates/web/nginx_default.tpl

@@ -0,0 +1,33 @@
+server {
+    listen      %ip%:%proxy_port%;
+    server_name %domain_idn% %alias_idn%;
+    %elog%error_log  /var/log/httpd/domains/%domain%.error.log error;
+
+    location / {
+        proxy_pass      http://%ip%:%web_port%;
+        location ~* ^.+\.(%nginx_extentions%)$ {
+            root           %docroot%;
+            access_log     /var/log/httpd/domains/%domain%.log combined;
+            access_log     /var/log/httpd/domains/%domain%.bytes bytes;
+            expires        max;
+            try_files      $uri @fallback;
+        }
+    }
+
+    location /error/ {
+        alias   %home%/%user%/web/%domain%/document_errors/;
+    }
+
+    location @fallback {
+        proxy_pass      http://%ip%:%web_port%;
+    }
+
+    location ~ /\.ht    {return 404;}
+    location ~ /\.svn/  {return 404;}
+    location ~ /\.git/  {return 404;}
+    location ~ /\.hg/   {return 404;}
+    location ~ /\.bzr/  {return 404;}
+
+    include %home%/%user%/conf/nginx.%domain%.conf*;
+}
+

install/0.9.7/rhel/templates/web/skel/document_errors/403.html

@@ -0,0 +1,29 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"><head>
+    <title>403 &mdash; Forbidden</title>
+    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
+    <meta name="description" content="You do not have permission to view this"/>
+    <style type="text/css">
+        body {font-size:14px; color:#777777; font-family:arial; text-align:center;}
+        h1 {font-size:180px; color:#99A7AF; margin: 70px 0 0 0;}
+        h2 {color: #DE6C5D; font-family: arial; font-size: 20px; font-weight: bold; letter-spacing: -1px; margin: -3px 0 39px;}
+        p {width:320px; text-align:center; margin-left:auto;margin-right:auto; margin-top: 30px }
+        div {width:320px; text-align:center; margin-left:auto;margin-right:auto;}
+        a:link {color: #34536A;}
+        a:visited {color: #34536A;}
+        a:active {color: #34536A;}
+        a:hover {color: #34536A;}
+    </style>
+</head>
+
+<body>
+    <p><a href="http://%domain%/">%domain%</a></p>
+
+    <h1>403</h1>
+    <h2>Forbidden</h2>
+    <div>
+        Unfortunately, you do not have permission to view this
+    </div>
+</body>
+
+</html>

install/0.9.7/rhel/templates/web/skel/document_errors/404.html

@@ -0,0 +1,28 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"><head>
+    <title>404 &mdash; Not Found</title>
+    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
+    <meta name="description" content="Sorry, page not found"/>
+    <style type="text/css">
+        body {font-size:14px; color:#777777; font-family:arial; text-align:center;}
+        h1 {font-size:180px; color:#99A7AF; margin: 70px 0 0 0;}
+        h2 {color: #DE6C5D; font-family: arial; font-size: 20px; font-weight: bold; letter-spacing: -1px; margin: -3px 0 39px;}
+        p {width:320px; text-align:center; margin-left:auto;margin-right:auto; margin-top: 30px }
+        div {width:320px; text-align:center; margin-left:auto;margin-right:auto;}
+        a:link {color: #34536A;}
+        a:visited {color: #34536A;}
+        a:active {color: #34536A;}
+        a:hover {color: #34536A;}
+    </style>
+</head>
+
+<body>
+    <p><a href="http://%domain%/">%domain%</a></p>
+    <h1>404</h1>
+    <h2>Page Not Found</h2>
+    <div>
+        It seems that the page you were trying to reach does not exist anymore, or maybe it has just moved.
+        You can start again from the <a href="http://%domain%/">home</a> or go back to <a href="javascript:%20history.go(-1)">previous page</a>.
+    </div>
+</body>
+</html>

install/0.9.7/rhel/templates/web/skel/document_errors/50x.html

@@ -0,0 +1,29 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"><head>
+    <title>500 &mdash; Internal Sever Error</title>
+    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
+    <meta name="description" content="Sorry, something went wrong. Internal Server Error"/>
+    <style type="text/css">
+        body {font-size:14px; color:#777777; font-family:arial; text-align:center;}
+        h1 {font-size:180px; color:#99A7AF; margin: 70px 0 0 0;}
+        h2 {color: #DE6C5D; font-family: arial; font-size: 20px; font-weight: bold; letter-spacing: -1px; margin: -3px 0 39px;}
+        p {width:320px; text-align:center; margin-left:auto;margin-right:auto; margin-top: 30px }
+        div {width:320px; text-align:center; margin-left:auto;margin-right:auto;}
+        a:link {color: #34536A;}
+        a:visited {color: #34536A;}
+        a:active {color: #34536A;}
+        a:hover {color: #34536A;}
+    </style>
+</head>
+
+<body>
+    <p><a href="http://%domain%/">%domain%</a></p>
+
+    <h1>500</h1>
+    <h2>Internal Server Error</h2>
+    <div>
+        Sorry, something went wrong :(
+    </div>
+</body>
+
+</html>

install/0.9.7/rhel/templates/web/skel/public_html/index.html

@@ -0,0 +1,26 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"><head>
+    <title>%domain% &mdash; Coming Soon</title>
+    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
+    <meta name="description" content="This is a default index page for a new domain."/>
+    <style type="text/css">
+        body {font-size:10px; color:#777777; font-family:arial; text-align:center;}
+        h1 {font-size:64px; color:#555555; margin: 70px 0 50px 0;}
+        p {width:320px; text-align:center; margin-left:auto;margin-right:auto; margin-top: 30px }
+        div {width:320px; text-align:center; margin-left:auto;margin-right:auto;}
+        a:link {color: #34536A;}
+        a:visited {color: #34536A;}
+        a:active {color: #34536A;}
+        a:hover {color: #34536A;}
+    </style>
+</head>
+
+<body>
+    <h1>%domain%</h1>
+    <div>
+        <a href="http://vestacp.com/">Powered by VESTA</a>
+    </div>
+</body>
+
+</html>
+

install/0.9.7/rhel/templates/web/skel/public_html/robots.txt

@@ -0,0 +1,3 @@
+# vestacp autogenerated robots.txt
+User-agent: *
+Crawl-delay: 10

install/0.9.7/rhel/templates/web/skel/public_shtml/index.html

@@ -0,0 +1,26 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"><head>
+    <title>%domain% &mdash; Coming Soon</title>
+    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
+    <meta name="description" content="This is a default index page for a new domain."/>
+    <style type="text/css">
+        body {font-size:10px; color:#777777; font-family:arial; text-align:center;}
+        h1 {font-size:64px; color:#555555; margin: 70px 0 50px 0;}
+        p {width:320px; text-align:center; margin-left:auto;margin-right:auto; margin-top: 30px }
+        div {width:320px; text-align:center; margin-left:auto;margin-right:auto;}
+        a:link {color: #34536A;}
+        a:visited {color: #34536A;}
+        a:active {color: #34536A;}
+        a:hover {color: #34536A;}
+    </style>
+</head>
+
+<body>
+    <h1>%domain%</h1>
+    <div>
+        <a href="http://vestacp.com/">Powered by VESTA</a>
+    </div>
+</body>
+
+</html>
+

install/0.9.7/rhel/templates/web/skel/public_shtml/robots.txt

@@ -0,0 +1,3 @@
+# vestacp autogenerated robots.txt
+User-agent: *
+Crawl-delay: 10

install/0.9.7/rhel/templates/web/suspend/.htaccess

@@ -0,0 +1,2 @@
+ErrorDocument 403 /index.html
+ErrorDocument 404 /index.html

install/0.9.7/rhel/templates/web/suspend/index.html

@@ -0,0 +1,27 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"><head>
+    <title>SUSPEND</title>
+    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
+    <meta name="description" content="Sorry, something went wrong. Internal Server Error"/>
+    <style type="text/css">
+        body {font-size:14px; color:#777777; font-family:arial; text-align:center;}
+        h1 {font-size:84px; color:#99A7AF; margin: 70px 0 0 0;}
+        h2 {color: #DE6C5D; font-family: arial; font-size: 20px; font-weight: bold; letter-spacing: -1px; margin: -3px 0 39px;}
+        p {width:320px; text-align:center; margin-left:auto;margin-right:auto; margin-top: 30px }
+        div {width:320px; text-align:center; margin-left:auto;margin-right:auto;}
+        a:link {color: #34536A;}
+        a:visited {color: #34536A;}
+        a:active {color: #34536A;}
+        a:hover {color: #34536A;}
+    </style>
+</head>
+
+<body>
+    <h1>SUSPEND</h1>
+    <h2>Your site has been suspended</h2>
+    <div>
+        Please contact technical support departament.
+    </div>
+</body>
+
+</html>

install/0.9.7/rhel/templates/web/webalizer.tpl

@@ -0,0 +1,110 @@
+HostName         %domain_idn%
+LogFile          /var/log/httpd/domains/%domain%.log
+OutputDir        %home%/%user%/web/%domain%/stats
+HistoryName      %home%/%user%/web/%domain%/stats/%domain%.hist
+Incremental      yes
+IncrementalName  %home%/%user%/web/%domain%/stats/%domain%.current
+PageType         htm*
+PageType         cgi
+PageType         php
+PageType         shtml
+DNSCache         /var/lib/webalizer/dns_cache.db
+DNSChildren      10
+Quiet            yes
+FoldSeqErr       yes
+IndexAlias       index.php
+HideURL          *.gif
+HideURL          *.GIF
+HideURL          *.jpg
+HideURL          *.JPG
+HideURL          *.png
+HideURL          *.PNG
+HideURL          *.ra
+SearchEngine     abcsearch.          terms=
+SearchEngine     alexa.              q=
+SearchEngine     alltheweb.          q=
+SearchEngine     alltheweb.          query=
+SearchEngine     alot.               q=
+SearchEngine     altavista.          q=
+SearchEngine     aolsearch.          query=
+SearchEngine     aport.ru            r=
+SearchEngine     ask.                q=
+SearchEngine     atlas.cz            q=
+SearchEngine     bbc.                q=
+SearchEngine     bing.               q=
+SearchEngine     blingo.             q=
+SearchEngine     blogs.yandex.ru     text=
+SearchEngine     btopenworld         query=
+SearchEngine     buscador.ya.com     q=
+SearchEngine     busca.              q=
+SearchEngine     business.           query=
+SearchEngine     centrum.cz          q=
+SearchEngine     chiff.              q=
+SearchEngine     clusty.             query=
+SearchEngine     comcast.            q=
+SearchEngine     crawler.            q=
+SearchEngine     cuil.               q=
+SearchEngine     dmoz.               search=
+SearchEngine     dogpile.com         q=
+SearchEngine     dpxml               qkw=
+SearchEngine     eureka.             searchword=
+SearchEngine     euroseek.           string=
+SearchEngine     exalead.            q=
+SearchEngine     excite              search=
+SearchEngine     ezilon.             q=
+SearchEngine     fastbrowsersearch.  q=
+SearchEngine     feedster.com        q=
+SearchEngine     fireball.de         q=
+SearchEngine     fireball.           keyword=
+SearchEngine     freeserve.          q=
+SearchEngine     gigablast.          q=
+SearchEngine     gogo.ru             q=
+SearchEngine     go.mail.ru          q=
+SearchEngine     google.             q=
+SearchEngine     hakia.              q=
+SearchEngine     hotbot.             query=
+SearchEngine     infoseek.           qt=
+SearchEngine     iwon                searchfor=
+SearchEngine     ixquick.com         query=
+SearchEngine     joeant.             keywords=
+SearchEngine     jyxo.cz             s=
+SearchEngine     looksmart.          key=
+SearchEngine     lycos.              query=
+SearchEngine     mamma.              q=
+SearchEngine     metacrawler         q=
+SearchEngine     msn.                MT=
+SearchEngine     msxml               qkw=
+SearchEngine     mysearch.           searchfor=
+SearchEngine     mywebsearch.        searchfor=
+SearchEngine     netscape.           q=
+SearchEngine     nigma.ru            q=
+SearchEngine     northernlight.      qr=
+SearchEngine     ntlworld.           q=
+SearchEngine     orange.             q=
+SearchEngine     overture.           Keywords=
+SearchEngine     punto.ru            text=
+SearchEngine     rambler.            keyword=
+SearchEngine     search.aol.         q=
+SearchEngine     search.babylon.     q=
+SearchEngine     search.centrum.     phrase=
+SearchEngine     search.conduit.     q=
+SearchEngine     search.earthlink    q=
+SearchEngine     search.icq.         q=
+SearchEngine     search.live.com     q=
+SearchEngine     search.rambler.ru   words=
+SearchEngine     search.winamp.      q=
+SearchEngine     searchy.            q=
+SearchEngine     seznam.cz           w=
+SearchEngine     snap.               query=
+SearchEngine     teoma.              q=
+SearchEngine     teradex.com         q=
+SearchEngine     ukplus              key=
+SearchEngine     verizon.            q=
+SearchEngine     virginmedia.        q=
+SearchEngine     voila.              rdata=
+SearchEngine     webcrawler          searchText=
+SearchEngine     web.search.naver.   query=
+SearchEngine     wisenut             q=
+SearchEngine     yahoo.              p=
+SearchEngine     yandex.             text=
+SearchEngine     yodao.              q=

install/0.9.7/rhel/vesta.log

@@ -0,0 +1,7 @@
+/usr/local/vesta/log/*.log {
+    missingok
+    notifempty
+    size 30k
+    yearly
+    create 0600 root root
+}

install/0.9.7/rhel/vsftpd.conf

@@ -0,0 +1,15 @@
+anonymous_enable=NO
+local_enable=YES
+write_enable=YES
+local_umask=002
+anon_upload_enable=NO
+dirmessage_enable=YES
+xferlog_enable=YES
+connect_from_port_20=YES
+xferlog_std_format=YES
+chroot_local_user=YES
+listen=YES
+pam_service_name=vsftpd
+userlist_enable=YES
+tcp_wrappers=YES
+force_dot_files=YES

install/vst-install.sh

@@ -0,0 +1,549 @@
+#!/bin/bash
+# Vesta installer
+
+# Define Variables
+email=$1
+RHOST='r.vestacp.com'
+CHOST='c.vestacp.com'
+
+REPO='cmmnt'
+VERSION='0.9.7'
+YUM_REPO='/etc/yum.repos.d/vesta.repo'
+arch=$(uname -i)
+
+rpms="nginx httpd httpd-devel.$arch mod_ssl mod_ruid2 mod_extract_forwarded
+    webalizer awstats mysql mysql-server php php-bcmath php-cli php-common
+    php-devel.$arch php-gd php-imap php-mbstring php-mcrypt php-mysql
+    php-pdo php-soap php-tidy php-xml php-xmlrpc phpMyAdmin exim dovecot
+    clamd spamassassin roundcubemail bind bind-utils bind-libs vsftpd
+    rrdtool vesta vesta-nginx vesta-php"
+
+# Am I root?
+if [ "x$(id -u)" != 'x0' ]; then
+    echo 'Error: this script can only be executed by root'
+    exit 1
+fi
+
+# Check supported version
+if [ ! -e '/etc/redhat-release' ]; then
+    echo 'Error: sorry, we currently support RHEL and CentOS only'
+    exit 1
+fi
+
+os=$(cut -f 1 -d ' ' /etc/redhat-release)
+if [ $os !=  'CentOS' ] && [ $os != 'Red' ]; then
+    echo 'Error: sorry, we currently support RHEL and CentOS only'
+fi
+release=$(grep -o "[0-9]" /etc/redhat-release |head -n1)
+
+# Are you sure ?
+if [ -z $1 ]; then
+    echo
+    echo
+    echo
+    echo
+    echo
+    echo '         ***********************************************************'
+    echo
+    echo '             _|      _|  _|_|_|_|    _|_|_|  _|_|_|_|_|    _|_|     '
+    echo '             _|      _|  _|        _|            _|      _|    _|   '
+    echo '             _|      _|  _|_|_|      _|_|        _|      _|_|_|_|   '
+    echo '               _|  _|    _|              _|      _|      _|    _|   '
+    echo '                 _|      _|_|_|_|  _|_|_|        _|      _|    _|   '
+    echo
+    echo
+    echo
+    echo
+    echo
+    echo
+    echo
+    echo
+    echo '         ***********************************************************'
+    echo
+    echo
+    read -n 1 -p 'Do you want to install Vesta Control Panel? [y/n]): ' answer
+    if [ "$answer" != 'y'  ] && [ "$answer" != 'Y'  ]; then
+        echo 'Goodbye'
+        exit 1
+    fi
+    echo
+
+    # Check email
+    read -p 'Please enter valid email address: ' email
+fi
+
+# Validate email
+local_part=$(echo $email | cut  -s -f1 -d\@)
+remote_host=$(echo $email | cut -s -f2 -d\@)
+mx_failed=1
+if [ ! -z "$remote_host" ] && [ ! -z "$local_part" ]; then
+    /usr/bin/host -t mx "$remote_host" &> /dev/null
+    mx_failed="$?"
+fi
+
+if [ "$mx_failed" -eq 1 ]; then
+    echo "Error: email $email is not valid"
+    exit 1
+fi
+
+echo
+echo
+echo
+echo
+echo 'Installation will take about 15 minutes ...'
+echo
+sleep 2
+
+# Check wget
+if [ ! -e '/usr/bin/wget' ]; then
+    yum -y install wget
+    if [ $? -ne 0 ]; then
+        echo "Error: can't install wget"
+        exit 1
+    fi
+fi
+
+# Check repo availability
+wget "$RHOST/$REPO/vesta.conf" -O /dev/null
+if [ $? -ne 0 ]; then
+    echo "Error: no access to $REPO repository"
+    exit 1
+fi
+
+# Check installed packages
+tmpfile=$(mktemp -p /tmp)
+rpm -qa > $tmpfile
+for rpm in $rpms; do 
+    if [ ! -z "$(grep ^$rpm. $tmpfile)" ]; then
+        conflicts="$rpm $conflicts"
+    fi
+done
+rm -f $tmpfile
+
+if [ ! -z "$conflicts" ]; then
+    echo
+    echo '!!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!'
+    echo
+    echo 'Following rpm packages aleady installed:'
+    echo "$conflicts"
+    echo
+    echo
+    echo 'It is recommended to remove them before proceeding.'
+    echo '!!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!! !!!'
+    echo
+    read -n 1 -p  'Do you really want to continue? [y/n]: ' answer
+    if [ "$answer" != 'y'  ] && [ "$answer" != 'Y'  ]; then
+        exit 1
+    fi
+    echo 
+    echo "Ok, let's try..."
+    sleep 1
+fi
+
+# Password generator
+gen_pass() {
+    MATRIX='0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz'
+    LENGTH=10
+    while [ ${n:=1} -le $LENGTH ]; do
+        PASS="$PASS${MATRIX:$(($RANDOM%${#MATRIX})):1}"
+        let n+=1
+    done
+    echo "$PASS"
+}
+
+# Update system
+yum -y update
+
+# Return code check
+if [ $? -ne 0 ]; then
+    echo 'Error: yum update failed'
+    exit 1
+fi
+
+# Install additional packages
+yum -y install screen mc libpng libjpeg curl curl libmcrypt \
+    libmcrypt mhash mhash freetype openssl flex libxml2 \
+    ImageMagick sqlite sqlite GeoIP GeoIP-data GeoIP pcre pcre \
+    sudo bc mailx lsof ntp
+
+# Return code check
+if [ $? -ne 0 ]; then
+    echo 'Error: yum install failed'
+    exit 1
+fi
+
+# Install EPEL repo
+if [ ! -e '/etc/yum.repos.d/epel.repo' ]; then
+    if [ "$release" -eq '5' ]; then
+        epel="5/i386/epel-release-5-4.noarch.rpm"
+    fi
+
+    if [ "$release" -eq '6' ]; then
+        epel="6/i386/epel-release-6-7.noarch.rpm"
+    fi
+
+    rpm -ivh http://dl.fedoraproject.org/pub/epel/$epel
+    if [ $? -ne 0 ]; then
+        echo "Error: can't install EPEL repository"
+        exit 1
+    fi
+fi
+
+# Install remi repo
+if [ ! -e '/etc/yum.repos.d/remi.repo' ]; then
+    if [ "$release" -eq '5' ]; then
+        remi="remi-release-5.rpm"
+    fi
+
+    if [ "$release" -eq '6' ]; then
+        remi="remi-release-6.rpm"
+    fi
+
+    rpm -ivh http://rpms.famillecollet.com/enterprise/$remi
+    if [ $? -ne 0 ]; then
+        echo "Error: can't install remi repository"
+        exit 1
+    fi
+fi
+
+# Install vesta repo
+echo "[vesta]
+name=Vesta - $REPO
+baseurl=http://$RHOST/$REPO/$release/\$basearch/
+enabled=1
+gpgcheck=1
+gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-VESTA" > $YUM_REPO
+wget $CHOST/GPG.txt -O /etc/pki/rpm-gpg/RPM-GPG-KEY-VESTA
+
+# Checking if old MySQL stuff exists
+if [ -e '/var/lib/mysql' ]; then
+    mv -f /var/lib/mysql /var/lib/mysql_old
+fi
+if [ -e '/etc/my.cnf' ]; then 
+    mv -f /etc/my.cnf /etc/my.cnf_old
+fi
+if [ -e '/root/.my.cnf' ]; then
+    mv -f /root/.my.cnf
+fi
+
+# Vesta packages
+yum -y --enablerepo=remi install $rpms
+
+# Return code check
+if [ $? -ne 0 ]; then
+    echo 'Error: yum install failed'
+    exit 1
+fi
+
+# Configuring run levels
+chkconfig iptables off
+if [ -e /etc/init.d/sendmail ]; then
+    chkconfig sendmail off
+fi
+if [ -e /etc/init.d/postfix ]; then
+    chkconfig postfix off
+fi
+chkconfig vesta on
+chkconfig httpd on
+chkconfig nginx on
+chkconfig mysqld on
+chkconfig vsftpd on
+chkconfig named on
+chkconfig exim on
+chkconfig clamd on
+chkconfig spamassassin on
+chkconfig dovecot on
+
+# Make dirs more visible
+echo 'LS_COLORS="$LS_COLORS:di=00;33"' >> /etc/profile
+
+# Vesta does not support SELINUX for now
+if [ -e '/etc/sysconfig/selinux' ]; then
+    sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/sysconfig/selinux
+    setenforce 0
+fi
+if [ -e '/etc/selinux/config' ]; then
+    sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
+    setenforce 0
+fi
+
+# Vesta use own webalizer routine
+rm -f /etc/cron.daily/00webalizer
+
+# NTP Synchronization
+echo '#!/bin/sh' > /etc/cron.daily/ntpdate
+echo '/sbin/ntpdate -s pool.ntp.org' >> /etc/cron.daily/ntpdate
+chmod 775 /etc/cron.daily/ntpdate
+/sbin/ntpdate -s pool.ntp.org
+
+# Vesta Environment
+echo "export VESTA='/usr/local/vesta'" > /etc/profile.d/vesta.sh
+chmod 755 /etc/profile.d/vesta.sh
+source /etc/profile.d/vesta.sh
+echo 'PATH=$PATH:/usr/local/vesta/bin' >> /root/.bash_profile
+echo 'export PATH' >> /root/.bash_profile
+source /root/.bash_profile
+mkdir -p $VESTA/conf
+mkdir -p $VESTA/log
+mkdir -p $VESTA/data
+mkdir -p $VESTA/ssl
+chmod 770 $VESTA/conf
+
+wget $RHOST/$REPO/vesta.conf -O $VESTA/conf/vesta.conf
+wget $CHOST/$VERSION/sudoers.conf -O /etc/sudoers
+wget $CHOST/$VERSION/vesta.log -O /etc/logrotate.d/vesta
+
+sed -i "s/umask 022/umask 002/g" /etc/profile
+
+# Create backup directory
+adduser backup
+ln -s /home/backup /backup
+chmod a+x /backup
+
+# Configuring data templates
+cd /usr/local/vesta/data
+mkdir ips
+mkdir queue
+mkdir users
+touch queue/backup.pipe
+touch queue/disk.pipe
+touch queue/webstats.pipe
+touch queue/restart.pipe
+touch queue/traffic.pipe
+chmod 750 users
+chmod 750 ips
+chmod -R 750 queue
+wget $CHOST/$VERSION/packages.tar.gz -O packages.tar.gz
+tar -xzf packages.tar.gz
+rm -f packages.tar.gz
+cd /usr/local/vesta/data
+wget $CHOST/$VERSION/templates.tar.gz -O templates.tar.gz
+tar -xzf templates.tar.gz
+rm -f templates.tar.gz
+chmod -R 755 /usr/local/vesta/data/templates
+
+cp templates/web/skel/public_html/index.html /var/www/html/
+sed -i 's/%domain%/It worked!/g' /var/www/html/index.html
+
+# Configuring ssl keys
+cd /usr/local/vesta/ssl
+wget $CHOST/$VERSION/certificate.crt -O certificate.crt
+wget $CHOST/$VERSION/certificate.key -O certificate.key
+
+# Adding admin user
+vpass=$(gen_pass)
+$VESTA/bin/v-add-user admin $vpass $email default System Administrator
+if [ $? -ne 0 ]; then
+    echo "Error: can't create admin user"
+    exit 1
+fi
+
+# Set shell
+$VESTA/bin/v-change-user-shell admin bash
+
+# Apache
+wget $CHOST/$VERSION/httpd.conf -O /etc/httpd/conf/httpd.conf
+wget $CHOST/$VERSION/httpd-status.conf -O /etc/httpd/conf.d/status.conf
+wget $CHOST/$VERSION/httpd-ssl.conf -O /etc/httpd/conf.d/ssl.conf
+wget $CHOST/$VERSION/httpd.log -O /etc/logrotate.d/httpd
+echo "MEFaccept 127.0.0.1" >> /etc/httpd/conf.d/mod_extract_forwarded.conf
+echo > /etc/httpd/conf.d/proxy_ajp.conf
+echo > /etc/httpd/conf.d/vesta.conf
+touch /var/log/httpd/access_log
+touch /var/log/httpd/error_log
+touch /var/log/httpd/suexec.log
+mkdir -p /var/log/httpd/domains
+chmod a+x /var/log/httpd
+chmod 640 /var/log/httpd/access_log
+chmod 640 /var/log/httpd/error_log
+chmod 640 /var/log/httpd/suexec.log
+chmod 751 /var/log/httpd/domains
+
+# Nginx
+wget $CHOST/$VERSION/nginx.conf -O /etc/nginx/nginx.conf
+wget $CHOST/$VERSION/nginx-status.conf -O /etc/nginx/conf.d/status.conf
+rm -f /etc/nginx/conf.d/default.conf
+rm -f /etc/nginx/conf.d/example_ssl.conf
+touch /etc/nginx/conf.d/vesta_ip.conf
+touch /etc/nginx/conf.d/vesta_users.conf
+
+# VsFTP
+wget $CHOST/$VERSION/vsftpd.conf -O /etc/vsftpd/vsftpd.conf
+
+# MySQL
+mpass=$(gen_pass)
+wget $CHOST/$VERSION/mysql.cnf -O /etc/my.cnf
+service mysqld start
+mysqladmin -u root password $mpass
+echo -e "[client]\npassword='$mpass'\n" >/root/.my.cnf
+$VESTA/bin/v-add-database-server mysql localhost 3306 root $mpass
+$VESTA/bin/v-add-database admin default default $(gen_pass) mysql
+
+# Bind
+wget $CHOST/$VERSION/named.conf -O /etc/named.conf
+chown root:named /etc/named.conf
+chmod 640 /etc/named.conf
+
+# Exim
+wget $CHOST/$VERSION/exim.conf -O /etc/exim/exim.conf
+wget $CHOST/$VERSION/dnsbl.conf -O /etc/exim/dnsbl.conf
+wget $CHOST/$VERSION/spam-blocks.conf -O /etc/exim/spam-blocks.conf
+wget $CHOST/$VERSION/clamd.conf -O /etc/clamd.conf
+mkdir /etc/exim/domains
+chmod 640 /etc/exim/exim.conf
+gpasswd -a clam exim
+gpasswd -a exim mail
+gpasswd -a clam mail
+gpasswd -a dovecot mail
+/usr/bin/freshclam
+
+# Dovecot config
+if [ "$release" -eq '5' ]; then
+    wget $CHOST/$VERSION/dovecot.conf -O /etc/dovecot.conf
+else
+    wget $CHOST/$VERSION/dovecot.tar.gz -O  /etc/dovecot.tar.gz
+    rm -rf /etc/dovecot
+    cd /etc/
+    tar -xzf dovecot.tar.gz
+    rm -f dovecot.tar.gz
+fi
+
+# PMA
+wget $CHOST/$VERSION/httpd-pma.conf -O /etc/httpd/conf.d/phpMyAdmin.conf
+wget $CHOST/$VERSION/pma.conf -O /etc/phpMyAdmin/config.inc.php
+sed -i "s/%blowfish_secret%/$(gen_pass)/g" /etc/phpMyAdmin/config.inc.php
+
+# Roundcube setup
+wget $CHOST/$VERSION/httpd-webmail.conf -O /etc/httpd/conf.d/roundcubemail.conf
+wget $CHOST/$VERSION/roundcube-main.conf -O /etc/roundcubemail/main.inc.php
+wget $CHOST/$VERSION/roundcube-db.conf -O /etc/roundcubemail/db.inc.php
+
+r="$(gen_pass)"
+mysql -e "CREATE DATABASE roundcube"
+mysql -e "GRANT ALL ON roundcube.* TO roundcube@localhost IDENTIFIED BY '$r'"
+sed -i "s/%password%/$r/g" /etc/roundcubemail/db.inc.php
+mysql roundcube < /usr/share/doc/roundcubemail-*/SQL/mysql.initial.sql
+
+# Configuring ip
+$VESTA/bin/v-update-sys-ip
+
+# Get main ip
+main_ip=$(ifconfig |grep 'inet addr:' |grep -v 127.0.0.1 |head -n1 |\
+    cut -f2 -d: | cut -f1 -d ' ')
+
+# Add default web domain on main ip
+$VESTA/bin/v-add-web-domain admin default.domain $main_ip
+
+# Add default dns domain on main ip
+$VESTA/bin/v-add-dns-domain admin default.domain $main_ip
+
+# Add default mail domain
+$VESTA/bin/v-add-mail-domain admin default.domain
+
+# Configuring crond
+command='sudo /usr/local/vesta/bin/v-update-sys-queue disk'
+$VESTA/bin/v-add-cron-job 'admin' '15' '02' '*' '*' '*' "$command"
+command='sudo /usr/local/vesta/bin/v-update-sys-queue traffic'
+$VESTA/bin/v-add-cron-job 'admin' '10' '00' '*' '*' '*' "$command"
+command='sudo /usr/local/vesta/bin/v-update-sys-queue webstats'
+$VESTA/bin/v-add-cron-job 'admin' '30' '03' '*' '*' '*' "$command"
+command='sudo /usr/local/vesta/bin/v-update-sys-queue backup'
+$VESTA/bin/v-add-cron-job 'admin' '*/30' '*' '*' '*' '*' "$command"
+command='sudo /usr/local/vesta/bin/v-backup-users'
+$VESTA/bin/v-add-cron-job 'admin' '10' '05' '*' '*' '*' "$command"
+command='sudo /usr/local/vesta/bin/v-update-user-stats'
+$VESTA/bin/v-add-cron-job 'admin' '20' '00' '01' '*' '*' "$command"
+command='sudo /usr/local/vesta/bin/v-update-sys-rrd'
+$VESTA/bin/v-add-cron-job 'admin' '*/5' '*' '*' '*' '*' "$command"
+
+# Creating symlink
+ln -s /usr/local/vesta/log /var/log/vesta
+
+# Stop unused services
+services='iptables sendmail postfix'
+for srv in $services; do
+    service $srv status > /dev/null
+    if [ $? -eq 0 ]; then
+        service $srv stop
+    fi
+done
+
+# Start system service
+services='vesta httpd nginx vsftpd exim dovecot clamd spamassassin named crond'
+for srv in $services; do
+    service $srv status > /dev/null
+    if [ $? -gt 0 ]; then
+        service $srv start
+    else
+        service $srv restart
+    fi
+done
+
+# Change sendmail client
+rm -f /etc/alternatives/mta
+ln -s /usr/sbin/sendmail.exim /etc/alternatives/mta
+
+# Build inititall rrd images
+$VESTA/bin/v-update-sys-rrd
+
+# Send notification to vestacp.com
+wget vestacp.com/notify/?$REPO -O /dev/null
+
+# Get server ip
+vst_ip=$(wget vestacp.com/what-is-my-ip/ -O - 2>/dev/null)
+if [ -z "$vst_ip" ]; then
+    vst_ip=$main_ip
+fi
+
+# Send email
+echo -e "Congratulations, you have just successfully installed \
+the Vesta Control Panel
+
+You can login in Vesta with following credentials:
+    username: admin
+    password: $vpass
+    https://$vst_ip:8083
+
+We hope that you enjoy your installation of Vesta. Please \
+feel free to contact us anytime if you have any questions.
+Thank you.
+
+--
+Sincerely yours
+vestacp.com team
+" > $tmpfile
+
+cat $tmpfile | mail -s "Vesta Control Panel" $email
+rm -f $tmpfile
+
+# Congrats
+echo
+echo
+echo '         ***********************************************************'
+echo
+echo '             _|      _|  _|_|_|_|    _|_|_|  _|_|_|_|_|    _|_|     '
+echo '             _|      _|  _|        _|            _|      _|    _|   '
+echo '             _|      _|  _|_|_|      _|_|        _|      _|_|_|_|   '
+echo '               _|  _|    _|              _|      _|      _|    _|   '
+echo '                 _|      _|_|_|_|  _|_|_|        _|      _|    _|   '
+echo
+echo '           Congratulations, you have just successfully installed'
+echo '           the Vesta Control Panel!'
+echo
+echo '           Now you can login in Vesta with following credentials:'
+echo '               username: admin'
+echo "               password: $vpass"
+echo "               https://$vst_ip:8083/"
+echo
+echo
+echo '           Thank you for using our product.'
+echo
+echo '         ***********************************************************'
+echo
+echo
+
+# Tricky way to get new PATH variable
+cd
+bash
+
+# EOF