New: NzbDrone service to automatically report errors and episode parse issues.

packages/elmah.sqlserver.1.2/content/App_Readme/Elmah.SqlServer.sql

@@ -0,0 +1,299 @@
+/*
+  
+   ELMAH - Error Logging Modules and Handlers for ASP.NET
+   Copyright (c) 2004-9 Atif Aziz. All rights reserved.
+  
+    Author(s):
+  
+        Atif Aziz, http://www.raboof.com
+        Phil Haacked, http://haacked.com
+  
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+  
+      http://www.apache.org/licenses/LICENSE-2.0
+  
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.
+  
+*/
+
+-- ELMAH DDL script for Microsoft SQL Server 2000 or later.
+
+-- $Id: SQLServer.sql 677 2009-09-29 18:02:39Z azizatif $
+
+DECLARE @DBCompatibilityLevel INT
+DECLARE @DBCompatibilityLevelMajor INT
+DECLARE @DBCompatibilityLevelMinor INT
+
+SELECT 
+    @DBCompatibilityLevel = cmptlevel 
+FROM 
+    master.dbo.sysdatabases 
+WHERE 
+    name = DB_NAME()
+
+IF @DBCompatibilityLevel <> 80
+BEGIN
+
+    SELECT @DBCompatibilityLevelMajor = @DBCompatibilityLevel / 10, 
+           @DBCompatibilityLevelMinor = @DBCompatibilityLevel % 10
+           
+    PRINT N'
+    ===========================================================================
+    WARNING! 
+    ---------------------------------------------------------------------------
+    
+    This script is designed for Microsoft SQL Server 2000 (8.0) but your 
+    database is set up for compatibility with version ' 
+    + CAST(@DBCompatibilityLevelMajor AS NVARCHAR(80)) 
+    + N'.' 
+    + CAST(@DBCompatibilityLevelMinor AS NVARCHAR(80)) 
+    + N'. Although 
+    the script should work with later versions of Microsoft SQL Server, 
+    you can ensure compatibility by executing the following statement:
+    
+    ALTER DATABASE [' 
+    + DB_NAME() 
+    + N'] 
+    SET COMPATIBILITY_LEVEL = 80
+
+    If you are hosting ELMAH in the same database as your application 
+    database and do not wish to change the compatibility option then you 
+    should create a separate database to host ELMAH where you can set the 
+    compatibility level more freely.
+    
+    If you continue with the current setup, please report any compatibility 
+    issues you encounter over at:
+    
+    http://code.google.com/p/elmah/issues/list
+
+    ===========================================================================
+'
+END
+GO
+
+/* ------------------------------------------------------------------------ 
+        TABLES
+   ------------------------------------------------------------------------ */
+
+CREATE TABLE [dbo].[ELMAH_Error]
+(
+    [ErrorId]     UNIQUEIDENTIFIER NOT NULL,
+    [Application] NVARCHAR(60)  COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
+    [Host]        NVARCHAR(50)  COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
+    [Type]        NVARCHAR(100) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
+    [Source]      NVARCHAR(60)  COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
+    [Message]     NVARCHAR(500) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
+    [User]        NVARCHAR(50)  COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
+    [StatusCode]  INT NOT NULL,
+    [TimeUtc]     DATETIME NOT NULL,
+    [Sequence]    INT IDENTITY (1, 1) NOT NULL,
+    [AllXml]      NTEXT COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL 
+) 
+ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
+
+GO
+
+ALTER TABLE [dbo].[ELMAH_Error] WITH NOCHECK ADD 
+    CONSTRAINT [PK_ELMAH_Error] PRIMARY KEY NONCLUSTERED ([ErrorId]) ON [PRIMARY] 
+GO
+
+ALTER TABLE [dbo].[ELMAH_Error] ADD 
+    CONSTRAINT [DF_ELMAH_Error_ErrorId] DEFAULT (NEWID()) FOR [ErrorId]
+GO
+
+CREATE NONCLUSTERED INDEX [IX_ELMAH_Error_App_Time_Seq] ON [dbo].[ELMAH_Error] 
+(
+    [Application]   ASC,
+    [TimeUtc]       DESC,
+    [Sequence]      DESC
+) 
+ON [PRIMARY]
+GO
+
+/* ------------------------------------------------------------------------ 
+        STORED PROCEDURES                                                      
+   ------------------------------------------------------------------------ */
+
+SET QUOTED_IDENTIFIER ON 
+GO
+SET ANSI_NULLS ON 
+GO
+
+CREATE PROCEDURE [dbo].[ELMAH_GetErrorXml]
+(
+    @Application NVARCHAR(60),
+    @ErrorId UNIQUEIDENTIFIER
+)
+AS
+
+    SET NOCOUNT ON
+
+    SELECT 
+        [AllXml]
+    FROM 
+        [ELMAH_Error]
+    WHERE
+        [ErrorId] = @ErrorId
+    AND
+        [Application] = @Application
+
+GO
+SET QUOTED_IDENTIFIER OFF 
+GO
+SET ANSI_NULLS ON 
+GO
+
+SET QUOTED_IDENTIFIER ON 
+GO
+SET ANSI_NULLS ON 
+GO
+
+CREATE PROCEDURE [dbo].[ELMAH_GetErrorsXml]
+(
+    @Application NVARCHAR(60),
+    @PageIndex INT = 0,
+    @PageSize INT = 15,
+    @TotalCount INT OUTPUT
+)
+AS 
+
+    SET NOCOUNT ON
+
+    DECLARE @FirstTimeUTC DATETIME
+    DECLARE @FirstSequence INT
+    DECLARE @StartRow INT
+    DECLARE @StartRowIndex INT
+
+    SELECT 
+        @TotalCount = COUNT(1) 
+    FROM 
+        [ELMAH_Error]
+    WHERE 
+        [Application] = @Application
+
+    -- Get the ID of the first error for the requested page
+
+    SET @StartRowIndex = @PageIndex * @PageSize + 1
+
+    IF @StartRowIndex <= @TotalCount
+    BEGIN
+
+        SET ROWCOUNT @StartRowIndex
+
+        SELECT  
+            @FirstTimeUTC = [TimeUtc],
+            @FirstSequence = [Sequence]
+        FROM 
+            [ELMAH_Error]
+        WHERE   
+            [Application] = @Application
+        ORDER BY 
+            [TimeUtc] DESC, 
+            [Sequence] DESC
+
+    END
+    ELSE
+    BEGIN
+
+        SET @PageSize = 0
+
+    END
+
+    -- Now set the row count to the requested page size and get
+    -- all records below it for the pertaining application.
+
+    SET ROWCOUNT @PageSize
+
+    SELECT 
+        errorId     = [ErrorId], 
+        application = [Application],
+        host        = [Host], 
+        type        = [Type],
+        source      = [Source],
+        message     = [Message],
+        [user]      = [User],
+        statusCode  = [StatusCode], 
+        time        = CONVERT(VARCHAR(50), [TimeUtc], 126) + 'Z'
+    FROM 
+        [ELMAH_Error] error
+    WHERE
+        [Application] = @Application
+    AND
+        [TimeUtc] <= @FirstTimeUTC
+    AND 
+        [Sequence] <= @FirstSequence
+    ORDER BY
+        [TimeUtc] DESC, 
+        [Sequence] DESC
+    FOR
+        XML AUTO
+
+GO
+SET QUOTED_IDENTIFIER OFF 
+GO
+SET ANSI_NULLS ON 
+GO
+
+SET QUOTED_IDENTIFIER ON 
+GO
+SET ANSI_NULLS ON 
+GO
+
+CREATE PROCEDURE [dbo].[ELMAH_LogError]
+(
+    @ErrorId UNIQUEIDENTIFIER,
+    @Application NVARCHAR(60),
+    @Host NVARCHAR(30),
+    @Type NVARCHAR(100),
+    @Source NVARCHAR(60),
+    @Message NVARCHAR(500),
+    @User NVARCHAR(50),
+    @AllXml NTEXT,
+    @StatusCode INT,
+    @TimeUtc DATETIME
+)
+AS
+
+    SET NOCOUNT ON
+
+    INSERT
+    INTO
+        [ELMAH_Error]
+        (
+            [ErrorId],
+            [Application],
+            [Host],
+            [Type],
+            [Source],
+            [Message],
+            [User],
+            [AllXml],
+            [StatusCode],
+            [TimeUtc]
+        )
+    VALUES
+        (
+            @ErrorId,
+            @Application,
+            @Host,
+            @Type,
+            @Source,
+            @Message,
+            @User,
+            @AllXml,
+            @StatusCode,
+            @TimeUtc
+        )
+
+GO
+SET QUOTED_IDENTIFIER OFF 
+GO
+SET ANSI_NULLS ON 
+GO
+

packages/elmah.sqlserver.1.2/content/App_Readme/Elmah.SqlServer.txt

@@ -0,0 +1,4 @@
+Please note that in order to complete the installation of ELMAH.SqlServer you will have to do the following:
+
+1) Run the Elmah.SqlServer.sql script against your database
+2) Edit your web.config with the correct settings in the elmah <connectionString> to connect to your database

packages/elmah.sqlserver.1.2/content/web.config.transform

@@ -0,0 +1,9 @@
+<configuration>
+  <elmah>
+    <errorLog type="Elmah.SqlErrorLog, Elmah" connectionStringName="elmah-sqlserver" />
+  </elmah>
+  <connectionStrings>
+    <!-- TODO: Replace the ****'s with the correct entries -->
+    <add name="elmah-sqlserver" connectionString="Data Source=****;User ID=****;Password=****;Initial Catalog=****;" providerName="System.Data.SqlClient"/>
+  </connectionStrings>
+</configuration>