* debian/postinst, etc/byobu/socketdir, experimental/byobu-aggregate-

status, experimental/byobu-status-all, === modified symlink
  usr/share/byobu/keybindings/common, === target was uf-keys,
  usr/bin/byobu, usr/bin/byobu-config, usr/bin/byobu-ctrl-a,
  usr/bin/byobu-disable, usr/bin/byobu-enable, usr/bin/byobu-export,
  usr/bin/byobu-janitor, usr/bin/byobu-launch, usr/bin/byobu-launcher,
  usr/bin/byobu-launcher-install, usr/bin/byobu-launcher-uninstall,
  usr/bin/byobu-quiet, usr/bin/byobu-reconnect-sockets, usr/bin/byobu-
  select-profile, usr/bin/byobu-shell, usr/bin/byobu-silent,
  usr/bin/byobu-status, usr/bin/byobu-status-detail, usr/bin/byobu-
  ugraph, usr/bin/byobu-ulevel, usr/lib/byobu/.common,
  usr/lib/byobu/.constants, usr/lib/byobu/custom,
  usr/lib/byobu/disk_io, usr/lib/byobu/ec2_cost,
  usr/lib/byobu/ip_address, usr/lib/byobu/logo,
  usr/lib/byobu/Makefile.am, usr/lib/byobu/mem_available,
  usr/lib/byobu/menu, usr/lib/byobu/network,
  usr/lib/byobu/.notify_osd, usr/lib/byobu/reboot_required,
  usr/lib/byobu/services, usr/lib/byobu/.shutil,
  usr/lib/byobu/updates_available, usr/share/byobu/keybindings/f-keys,
  usr/share/byobu/profiles/common, usr/share/man/man1/byobu.1,
  usr/share/man/man1/byobu-select-session.1: LP: #802122
  - massive reworking to globalize and standardize the use of
    + BYOBU_RUN_DIR, which is typically /var/run/screen/S-$USER/byobu
    + BYOBU_CONFIG_DIR, which is typically $HOME/.byobu
  - this rework should more easily allow us to support users who's
    SOCKETDIR is not /var/run/screen, and XDG_USER_DIRS users

debian/changelog

@@ -7,6 +7,32 @@ byobu (4.17) unreleased; urgency=low
     - fix temperature on Atom D510
   * usr/bin/byobu-status:
     - deprecated RUNDIR
+  * debian/postinst, etc/byobu/socketdir, experimental/byobu-aggregate-
+    status, experimental/byobu-status-all, === modified symlink
+    usr/share/byobu/keybindings/common, === target was uf-keys,
+    usr/bin/byobu, usr/bin/byobu-config, usr/bin/byobu-ctrl-a,
+    usr/bin/byobu-disable, usr/bin/byobu-enable, usr/bin/byobu-export,
+    usr/bin/byobu-janitor, usr/bin/byobu-launch, usr/bin/byobu-launcher,
+    usr/bin/byobu-launcher-install, usr/bin/byobu-launcher-uninstall,
+    usr/bin/byobu-quiet, usr/bin/byobu-reconnect-sockets, usr/bin/byobu-
+    select-profile, usr/bin/byobu-shell, usr/bin/byobu-silent,
+    usr/bin/byobu-status, usr/bin/byobu-status-detail, usr/bin/byobu-
+    ugraph, usr/bin/byobu-ulevel, usr/lib/byobu/.common,
+    usr/lib/byobu/.constants, usr/lib/byobu/custom,
+    usr/lib/byobu/disk_io, usr/lib/byobu/ec2_cost,
+    usr/lib/byobu/ip_address, usr/lib/byobu/logo,
+    usr/lib/byobu/Makefile.am, usr/lib/byobu/mem_available,
+    usr/lib/byobu/menu, usr/lib/byobu/network,
+    usr/lib/byobu/.notify_osd, usr/lib/byobu/reboot_required,
+    usr/lib/byobu/services, usr/lib/byobu/.shutil,
+    usr/lib/byobu/updates_available, usr/share/byobu/keybindings/f-keys,
+    usr/share/byobu/profiles/common, usr/share/man/man1/byobu.1,
+    usr/share/man/man1/byobu-select-session.1: LP: #802122
+    - massive reworking to globalize and standardize the use of
+      + BYOBU_RUN_DIR, which is typically /var/run/screen/S-$USER/byobu
+      + BYOBU_CONFIG_DIR, which is typically $HOME/.byobu
+    - this rework should more easily allow us to support users who's
+      SOCKETDIR is not /var/run/screen, and XDG_USER_DIRS users
 
  -- Dustin Kirkland <kirkland@ubuntu.com>  Mon, 27 Jun 2011 14:14:17 +0000
 

debian/postinst

@@ -25,13 +25,14 @@ fi
 rm -f /etc/update-motd.d/55-window-manager
 
 # Notify users that they should reload their profile
-DIR="/var/run/screen"
+[ -r "/etc/$PKG/socketdir" ] && . "/etc/$PKG/socketdir"
-if [ -d "$DIR" ]; then
+if [ -d "$SOCKETDIR" ]; then
-	for d in "$DIR"/*; do
+	for d in "$DIR"/*/"$PKG"; do
 		[ -d "$d" ] || continue
-		touch "$d/$PKG.reload-required"
+		flag="$d/reload-required"
-		chown --reference "$d" "$d/$PKG.reload-required" || true
+		touch "$flag"
-		chmod 700 "$d/$PKG.reload-required"
+		chown --reference "$d" "$flag" || true
+		chmod 700 "$flag"
 	done
 fi
 

etc/byobu/socketdir

@@ -1,6 +1,7 @@
 # Set the location of the socket directory that byobu will use.
 # On Debian/Ubuntu systems, this is in /var/run/screen, but on
-# other distros, it might be elsewhere, such as /tmp
+# other distros, it might be elsewhere, such as /tmp/screens
+# depending on your screen compilation.
 #
 # This file will be sourced by both shell scripts and python code,
 # so please ensure that:

experimental/byobu-aggregate-status

@@ -1,8 +1,6 @@
 #!/bin/sh
 
 PKG="byobu"
-RUN="/var/run/screen/S-$USER"
-mkdir -p "$RUN/$PKG"
 
 hput() {
     eval "$1""$2"='$3'
@@ -57,8 +55,8 @@ hput freq wifi_quality 17
 NOW=$(date +%s)
 for i in /usr/lib/$PKG/*; do
 	j=${i##*/}
-	#byobu-status "$j" > "$RUN/$PKG/$j.status"
+	#byobu-status "$j" > "$BYOBU_RUN_DIR/$j.status"
-	CACHE="$RUN/$PKG/$j.status"
+	CACHE="$BYOBU_RUN_DIR/$j.status"
         [ -r "$CACHE.last" ] && read lastrun < "$CACHE.last" || lastrun=0
 	freq=$(hget freq $j)
         expiration=$(($lastrun+$freq))
@@ -69,6 +67,6 @@ for i in /usr/lib/$PKG/*; do
 done
 
 # Print
-sed -e ':a;N;$!ba;s/\n//g' "$RUN/$PKG/"*.status > "$RUN/$PKG.status"
+sed -e ':a;N;$!ba;s/\n//g' "$BYOBU_RUN_DIR/"*.status > "$BYOBU_RUN_DIR/status"
 
 # vi: syntax=sh ts=4 noexpandtab

experimental/byobu-status-all

@@ -4,7 +4,7 @@ LIBDIR=/home/kirkland/src/byobu/byobu/usr/lib/byobu
 . "$LIBDIR/.constants"
 . "$LIBDIR/.shutil"
 
-mkdir -p "$CACHE_DIR/status"
+mkdir -p "$BYOBU_RUN_DIR/status"
 for i in "$LIBDIR/"*; do
 	case "$i" in
 		*/Makefile.am)
@@ -18,7 +18,7 @@ for i in "$LIBDIR/"*; do
 			. "$i"
 			j=${i##*/}
 			#printf "Running [__$j]...["
-			eval "__$j" > "$CACHE_DIR/status/$j"
+			eval "__$j" > "$BYOBU_RUN_DIR/status/$j"
 			#printf "]\n"
 		;;
 	esac

usr/bin/byobu

@@ -17,20 +17,13 @@
 #    You should have received a copy of the GNU General Public License
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-PKG="byobu"
 VERSION=4.17
-[ -z "$BYOBU_PREFIX" ] && export BYOBU_PREFIX="/usr"
-export BYOBU_PREFIX
-[ -r "/etc/$PKG/socketdir" ] && . "/etc/$PKG/socketdir" || SOCKETDIR="/var/run/screen"
-RUN="$SOCKETDIR/S-$USER"
-DATA="$HOME/.$PKG"
 
+PKG="byobu"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
 . "${BYOBU_PREFIX}/lib/${PKG}/.shutil"
-if [ ! -x "$BYOBU_PREFIX/bin/$PKG" ]; then
+. "${BYOBU_PREFIX}/lib/${PKG}/.constants"
-	error "Cannot find $BYOBU_PREFIX/bin/$PKG"
+
-	error "If you have installed it elsewhere, export BYOBU_PREFIX in your shell"
-	exit 1
-fi
 
 # Add a version argument for debugging purposes
 if [ "$#" = "1" ]; then
@@ -44,7 +37,7 @@ if [ "$#" = "1" ]; then
 fi
 
 # Check if we're being autolaunched, and this user explicitly does not want it.
-if [ "$0" = "/etc/profile.d/Z98-$PKG.sh" ] && [ -r "$DATA/disable-autolaunch" ]; then
+if [ "$0" = "/etc/profile.d/Z98-$PKG.sh" ] && [ -r "$BYOBU_CONFIG_DIR/disable-autolaunch" ]; then
 	exit 0
 fi
 
@@ -58,11 +51,11 @@ byobu-janitor --force
 CUSTOM_WINDOW_SET=0
 if [ -r "$BYOBU_WINDOWS" ]; then
 	CUSTOM_WINDOW_SET=1
-elif [ -r "$DATA/windows.$BYOBU_WINDOWS" ]; then
+elif [ -r "$BYOBU_CONFIG_DIR/windows.$BYOBU_WINDOWS" ]; then
 	CUSTOM_WINDOW_SET=1
-	BYOBU_WINDOWS="$DATA/windows.$BYOBU_WINDOWS"
+	BYOBU_WINDOWS="$BYOBU_CONFIG_DIR/windows.$BYOBU_WINDOWS"
 elif [ "$#" = "0" ]; then
-	BYOBU_WINDOWS="$DATA/windows"
+	BYOBU_WINDOWS="$BYOBU_CONFIG_DIR/windows"
 else
 	BYOBU_WINDOWS="/dev/null"
 fi
@@ -80,7 +73,7 @@ fi
 
 # Drop a symlink to the ssh socket in $HOME, since we can ensure that exists
 if [ -S "$SSH_AUTH_SOCK" ] && [ ! -h "$SSH_AUTH_SOCK" ]; then
-	ln -sf "$SSH_AUTH_SOCK" "$DATA/.ssh-agent"
+	ln -sf "$SSH_AUTH_SOCK" "$BYOBU_CONFIG_DIR/.ssh-agent"
 fi
 
 # Some users want to maintain a separate ~/.byoburc from ~/.screenrc,

usr/bin/byobu-config

@@ -29,17 +29,17 @@ from snack import *
 PKG="byobu"
 HOME=os.getenv("HOME")
 USER=os.getenv("USER")
+BYOBU_CONFIG_DIR=os.getenv("BYOBU_CONFIG_DIR")
 if os.getenv("BYOBU_PREFIX"):
     PREFIX = os.getenv("BYOBU_PREFIX")
 else:
     PREFIX = "/usr"
 SHARE=PREFIX+'/share/'+PKG
 DOC=PREFIX+'/share/doc/'+PKG
-DATA=HOME+"/."+PKG
 if not os.path.exists(SHARE):
-    SHARE = DATA+"/"+SHARE
+    SHARE = BYOBU_CONFIG_DIR+"/"+SHARE
 if not os.path.exists(DOC):
-    DOC = DATA+"/"+DOC
+    DOC = BYOBU_CONFIG_DIR+"/"+DOC
 DEF_ESC="A"
 RELOAD = "If you are using the default set of keybindings, press\n<F5> or <ctrl-a-R> to activate these changes.\n\nOtherwise, exit this screen session and start a new one."
 SOCKETDIR="/var/run/screen"
@@ -48,8 +48,8 @@ if os.path.exists("/etc/%s/socketdir" % PKG):
 	execfile(i)
     except:
 	SOCKETDIR="/var/run/screen"
-RELOAD_FLAG="%s/S-%s/%s.reload-required" % (SOCKETDIR, USER, PKG)
+RELOAD_FLAG="%s/reload-required" % (BYOBU_CONFIG_DIR)
-RELOAD_CMD="screen -X at 0 source "+DATA+"/profile"
+RELOAD_CMD="screen -X at 0 source "+BYOBU_CONFIG_DIR+"/profile"
 ESC = ''
 snack.hotkeys[ESC] = ord(ESC)
 snack.hotkeys[ord(ESC)] = ESC
@@ -193,7 +193,7 @@ def keybindings(screen, size):
     return 100
 
 def switch_keybindings(set):
-    commands.getoutput(SED + " -i -e 's:^source .*$:source "+SHARE+"/keybindings/"+set+":' "+DATA+"/keybindings")
+    commands.getoutput(SED + " -i -e 's:^source .*$:source "+SHARE+"/keybindings/"+set+":' "+BYOBU_CONFIG_DIR+"/keybindings")
 
 def newwindow(screen, size):
     title=Entry(8, text="shell", returnExit=1)
@@ -255,7 +255,7 @@ def newwindow(screen, size):
     return 100
 
 def appendwindow(win):
-    f=open(DATA+'/windows', 'a')
+    f=open(BYOBU_CONFIG_DIR+'/windows', 'a')
     try:
         f.write(win+"\n")
 
@@ -266,12 +266,12 @@ def appendwindow(win):
     f.close()
 
 def readwindows():
-    if not os.path.isfile(DATA+'/windows'):
+    if not os.path.isfile(BYOBU_CONFIG_DIR+'/windows'):
         windowsfile=SHARE+'/windows/common'
-    elif os.path.getsize(DATA+'/windows') == 0:
+    elif os.path.getsize(BYOBU_CONFIG_DIR+'/windows') == 0:
         windowsfile=SHARE+'/windows/common'
     else:
-        windowsfile=DATA+'/windows'
+        windowsfile=BYOBU_CONFIG_DIR+'/windows'
     f=open(windowsfile)
     try:
         li=[]
@@ -333,8 +333,8 @@ def readstatus():
     status["uptime"]=1
     status["whoami"]=1
     status["wifi_quality"]=1
-    if os.path.exists(DATA+'/status'):
+    if os.path.exists(BYOBU_CONFIG_DIR+'/status'):
-        f=open(DATA+'/status', 'r')
+        f=open(BYOBU_CONFIG_DIR+'/status', 'r')
         for line in f.readlines():
            try:
                line = line.rstrip()
@@ -353,7 +353,7 @@ def readstatus():
     return li
 
 def writestatus(items):
-    f=open(DATA+'/status', 'w')
+    f=open(BYOBU_CONFIG_DIR+'/status', 'w')
     try:
         for i in items:
             if i[0] == 1:
@@ -390,7 +390,7 @@ def togglestatus(screen, size):
     return 100
 
 def writewindows(winlist):
-    f=open(DATA+'/windows', 'w')
+    f=open(BYOBU_CONFIG_DIR+'/windows', 'w')
     try:
         for win in winlist:
             if win[0] == -1:
@@ -459,7 +459,7 @@ def appendtofile(p, s):
 
 
 def getesckey():
-    path=DATA+'/keybindings'
+    path=BYOBU_CONFIG_DIR+'/keybindings'
     if not os.path.exists(path):
         return DEF_ESC
     line = commands.getoutput("grep ^escape "+path)
@@ -471,7 +471,7 @@ def getesckey():
     return esc
 
 def setesckey(key):
-    path = DATA+'/keybindings'
+    path = BYOBU_CONFIG_DIR+'/keybindings'
     if key != "":
         if key == " ":
             key = "`"
@@ -525,7 +525,7 @@ def chgesc(screen, size):
     return 100
 
 def autolaunch():
-    if os.path.exists(DATA+"/disable-autolaunch"):
+    if os.path.exists(BYOBU_CONFIG_DIR+"/disable-autolaunch"):
 	return 0
     if commands.getstatusoutput('grep -qs byobu-launch %s/.profile' % HOME)[0] == 0:
 	return 1

usr/bin/byobu-ctrl-a

@@ -17,8 +17,10 @@
 #    You should have received a copy of the GNU General Public License
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-
 PKG="byobu"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
 keybindings="$HOME/.$PKG/keybindings"
 touch "$keybindings"
 

usr/bin/byobu-disable

@@ -17,6 +17,10 @@
 #    You should have received a copy of the GNU General Public License
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
+PKG="byobu"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
 byobu-launcher-uninstall
 
 echo

usr/bin/byobu-enable

@@ -17,6 +17,10 @@
 #    You should have received a copy of the GNU General Public License
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
+PKG="byobu"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
 byobu-launcher-install
 
 echo

usr/bin/byobu-export

@@ -17,6 +17,10 @@
 #    You should have received a copy of the GNU General Public License
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
+PKG="byobu"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
 gettext "
 The byobu-export utility is now deprecated.
 

usr/bin/byobu-janitor

@@ -20,20 +20,19 @@
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 PKG="byobu"
-DATA="$HOME/.$PKG"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
 XDG="$HOME/.local/share/$PKG"
-[ -z "$BYOBU_PREFIX" ] && export BYOBU_PREFIX="/usr"
+FLAG="$BYOBU_RUN_DIR/reload-required"
-[ -r "/etc/$PKG/socketdir" ] && . "/etc/$PKG/socketdir" || SOCKETDIR="/var/run/screen"
-RUN="$SOCKETDIR/S-$USER"
-FLAG="$RUN/$PKG.reload-required"
 
 # Let's get prepped to switch over to XDG one day; maintain symlink for now
 mkdir -p "$XDG"
-if [ ! -h "$DATA" ]; then
+if [ ! -h "$BYOBU_CONFIG_DIR" ]; then
-	mv -f "$DATA"/* "$DATA"/.* "$XDG" 2>/dev/null || true
+	mv -f "$BYOBU_CONFIG_DIR"/* "$BYOBU_CONFIG_DIR"/.* "$XDG" 2>/dev/null || true
-	rmdir "$DATA" 2>/dev/null || true
+	rmdir "$BYOBU_CONFIG_DIR" 2>/dev/null || true
 fi
-ln -sf "$XDG" "$DATA"
+ln -sf "$XDG" "$BYOBU_CONFIG_DIR"
 
 # Exit immediately, if we're not forced, and there is no reload flag
 if [ "$1" != "--force" ] && [ ! -e "$FLAG" ]; then
@@ -42,26 +41,24 @@ fi
 
 # Set the rest of the variables
 DEFAULT_PROFILE="light"
-PROFILE="$DATA/profile"
+PROFILE="$BYOBU_CONFIG_DIR/profile"
 # Use gsed on non-Linux OS's
 command -v gsed >/dev/null && SED="gsed" || SED="sed"
 command -v greadlink >/dev/null && READLINK="greadlink" || READLINK="readlink"
 
 # Create byobu-exchange buffer file, with secure permissions, if it doesn't exist
-if [ -w "$RUN" ] && [ ! -e "$RUN/$PKG-exchange" ]; then
+[ -e "$BYOBU_RUN_DIR/printscreen" ] || install -m 600 /dev/null "$BYOBU_RUN_DIR/printscreen"
-	install -m 600 /dev/null "$RUN/$PKG-exchange"
-fi
 
 # Affects: users who launched using sudo, such that their config dir
 # is not writable by them
-if [ -d "$DATA" ] && [ ! -w "$DATA" ]; then
+if [ -d "$BYOBU_CONFIG_DIR" ] && [ ! -w "$BYOBU_CONFIG_DIR" ]; then
-	echo "ERROR: [$DATA] is not writable by the current user" 1>&2
+	echo "ERROR: [$BYOBU_CONFIG_DIR] is not writable by the current user" 1>&2
 	exit 1
 fi
 
 # Affects: First runs with no configuration
 # Seed the configuration
-[ -r "$DATA/color" ] || printf "BACKGROUND=k\nFOREGROUND=w\nMONOCHROME=0" > "$DATA/color"
+[ -r "$BYOBU_CONFIG_DIR/color" ] || printf "BACKGROUND=k\nFOREGROUND=w\nMONOCHROME=0" > "$BYOBU_CONFIG_DIR/color"
 [ -r "$PROFILE" ] || ln -sf $BYOBU_PREFIX/share/$PKG/profiles/common "$PROFILE"
 
 # Affects: Symlinks pointing to color profiles
@@ -99,8 +96,8 @@ if [ -h "$PROFILE" ]; then
 	esac
 fi
 
-[ -s "$DATA/keybindings" ] || echo "source $BYOBU_PREFIX/share/$PKG/keybindings/common" > "$DATA/keybindings"
+[ -s "$BYOBU_CONFIG_DIR/keybindings" ] || echo "source $BYOBU_PREFIX/share/$PKG/keybindings/common" > "$BYOBU_CONFIG_DIR/keybindings"
-if [ ! -r "$DATA/status" ]; then
+if [ ! -r "$BYOBU_CONFIG_DIR/status" ]; then
 	if [ -r /etc/$PKG/statusrc ]; then
 		skel=/etc/$PKG/statusrc
 	elif [ -r "$BYOBU_PREFIX/share/$PKG/profiles/statusrc" ]; then
@@ -108,20 +105,20 @@ if [ ! -r "$DATA/status" ]; then
 	else
 		skel=/dev/null
 	fi
-	grep -A 999999 BEGIN_CUT_HERE $skel | grep -B 999999 END_CUT_HERE | grep -v CUT > "$DATA/status"
+	grep -A 999999 BEGIN_CUT_HERE $skel | grep -B 999999 END_CUT_HERE | grep -v CUT > "$BYOBU_CONFIG_DIR/status"
 	# If it looks like we're running in ec2, enable ec2_cost by default
-	[ -x /usr/sbin/update-grub-legacy-ec2 ] && sed -i "s/ec2_cost=.*/ec2_cost=1/" "$DATA/status"
+	[ -x /usr/sbin/update-grub-legacy-ec2 ] && sed -i "s/ec2_cost=.*/ec2_cost=1/" "$BYOBU_CONFIG_DIR/status"
 fi
-[ -r "$DATA/windows" ] || touch "$DATA/windows"
+[ -r "$BYOBU_CONFIG_DIR/windows" ] || touch "$BYOBU_CONFIG_DIR/windows"
 [ -r "$HOME/.screenrc" ] || touch "$HOME/.screenrc"
 
 # Affects: Upgrades from <= byobu-2.11
 # The status scripts used to have hyphens in their name, but now use
 # underscores such that we can source the file as a shell snippet;
 # fix existing status configuration.
-$SED -i -e "s/\([^=]+\)-\([^=]+\)=/\1_\2=/g" "$DATA/status"
+$SED -i -e "s/\([^=]+\)-\([^=]+\)=/\1_\2=/g" "$BYOBU_CONFIG_DIR/status"
-$SED -i -e "s/^disk-.*=/disk=/" "$DATA/status"
+$SED -i -e "s/^disk-.*=/disk=/" "$BYOBU_CONFIG_DIR/status"
-$SED -i -e "s/^network-.*=/network=/" "$DATA/status"
+$SED -i -e "s/^network-.*=/network=/" "$BYOBU_CONFIG_DIR/status"
 
 # Affects: Upgrades from <= byobu-2.16
 # screen-launcher was renamed byobu-launcher; if the user has byobu
@@ -133,8 +130,8 @@ fi
 # Affects: Upgrades from <= byobu-2.25
 # Collapse separate status config files into the sourced config
 for i in disk network distro logo; do
-	if [ -r "$DATA/$i" ]; then
+	if [ -r "$BYOBU_CONFIG_DIR/$i" ]; then
-		val=`cat $DATA/$i`
+		val=`cat $BYOBU_CONFIG_DIR/$i`
 		uc=`echo "$i" | tr "[:lower:]" "[:upper:]"`
 		case $i in
 			disk|network)
@@ -142,8 +139,8 @@ for i in disk network distro logo; do
 			distro|logo)
 				key="$uc" ;;
 		esac
-		echo "$key=\"$val\"" >> "$DATA/statusrc"
+		echo "$key=\"$val\"" >> "$BYOBU_CONFIG_DIR/statusrc"
-		rm "$DATA/$i"
+		rm "$BYOBU_CONFIG_DIR/$i"
 	fi
 done
 
@@ -161,22 +158,16 @@ fi
 
 # Affects: Upgrades from <= byobu-2.78 which might have "motd+shell"
 # in their window list; update this to just "shell"
-if grep -qs "motd+shell" "$DATA/windows"; then
+if grep -qs "motd+shell" "$BYOBU_CONFIG_DIR/windows"; then
-	$SED -i -e "s/motd+shell/shell/g" "$DATA/windows" || true
+	$SED -i -e "s/motd+shell/shell/g" "$BYOBU_CONFIG_DIR/windows" || true
-fi
-
-# Affects: Upgrades from <= byobu-3.6, change location of $SSH_AUTH_SOCK
-if [ -h "$RUN/$PKG.ssh-agent" ]; then
-	rm -f "$DATA/.ssh-agent"
-	mv -f "$RUN/$PKG.ssh-agent" "$DATA/.ssh-agent"
 fi
 
 # Affects: Upgrades from <= byobu 4.3, remove ec2_rates
-rm -f "$DATA/ec2_rates"
+rm -f "$BYOBU_CONFIG_DIR/ec2_rates"
 
 # Affects: Upgrades from <= byobu 4.4, update "shell" -> "byobu-shell"
-if grep -qs " shell$" "$DATA/windows"; then
+if grep -qs " shell$" "$BYOBU_CONFIG_DIR/windows"; then
-	$SED -i -e "s/ shell$/ $PKG-shell/g" "$DATA/windows" || true
+	$SED -i -e "s/ shell$/ $PKG-shell/g" "$BYOBU_CONFIG_DIR/windows" || true
 fi
 
 # Clean up flag

usr/bin/byobu-launch

@@ -18,7 +18,8 @@
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 PKG="byobu"
-DATA="$HOME/.$PKG"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
 
 # Respect an environment variable passable over SSH to disable
 # Byobu launch.  This put that configurability on the SSH client,
@@ -44,9 +45,9 @@ if [ "$LC_BYOBU" != "0" ] && [ "$BYOBU_DISABLE" != "1" ]; then
 			if byobu-launcher; then
 				# Wait very briefly for the no-logout flag to get written?
 				sleep 0.1
-				if [ -e "$DATA/no-logout-on-detach" ] || [ -e "/var/run/screen/S-$USER/byobu.no-logout" ]; then
+				if [ -e "$BYOBU_CONFIG_DIR/no-logout-on-detach" ] || [ -e "$BYOBU_RUN_DIR/no-logout" ]; then
 					# The user does not want to logout on byobu detach
-					rm -f "/var/run/screen/S-$USER/byobu.no-logout"	# Remove one-time no-logout flag, if it exists
+					rm -f "$BYOBU_RUN_DIR/no-logout"	# Remove one-time no-logout flag, if it exists
 					true
 				else
 					exit 0

usr/bin/byobu-launcher

@@ -18,11 +18,10 @@
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 PKG="byobu"
-DATA="$HOME/.$PKG"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
-[ -z "$BYOBU_PREFIX" ] && export BYOBU_PREFIX="/usr"
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
-export BYOBU_PREFIX
 
-if [ -e "$DATA/disable-autolaunch" ]; then
+if [ -e "$BYOBU_CONFIG_DIR/disable-autolaunch" ]; then
 	false
 else
 	case "$TERM" in

usr/bin/byobu-launcher-install

@@ -19,8 +19,10 @@
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 PKG="byobu"
-DATA="$HOME/.$PKG"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
-FLAG="$DATA/no-logout-on-detach"
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
+FLAG="$BYOBU_CONFIG_DIR/no-logout-on-detach"
 
 LOGOUT_ON_DETACH=1
 for i in $@; do
@@ -47,7 +49,7 @@ install_launcher() {
 $PKG-launcher-uninstall || true
 # Hush login, since we will handle motd printing
 touch "$HOME"/.hushlogin
-rm -f "$DATA/disable-autolaunch"
+rm -f "$BYOBU_CONFIG_DIR/disable-autolaunch"
 
 # Update the logout/nologout flag
 update_flag

usr/bin/byobu-launcher-uninstall

@@ -19,7 +19,8 @@
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 PKG="byobu"
-DATA="$HOME/.$PKG"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
 
 # Use gsed on non-Linux OS's
 which gsed 2>/dev/null && SED="gsed" || SED="sed"
@@ -34,8 +35,8 @@ remove_launcher() {
 for i in ".profile" ".bashrc" ".bash_profile" ".zprofile"; do
 	remove_launcher "$HOME/$i"
 done
-mkdir -p "$DATA"
+mkdir -p "$BYOBU_CONFIG_DIR"
-touch "$DATA/disable-autolaunch"
+touch "$BYOBU_CONFIG_DIR/disable-autolaunch"
 # install disabled motd printing; re-enable
 rm -f "$HOME"/.hushlogin
 

usr/bin/byobu-quiet

@@ -17,9 +17,11 @@
 #    You should have received a copy of the GNU General Public License
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-
 PKG="byobu"
-FLAG="$HOME/.$PKG/status.disable"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
+FLAG="$BYOBU_CONFIG_DIR/status.disable"
 
 # Clean up environment
 sed -i "/hardstatus/d" "$HOME/.$PKG/keybindings" || true

usr/bin/byobu-reconnect-sockets

@@ -22,8 +22,8 @@
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 PKG="byobu"
-
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
-. "${BYOBU_PREFIX}/lib/${PKG}/.shutil"
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
 
 case "$-" in
 	*i*)

usr/bin/byobu-select-profile

@@ -23,11 +23,8 @@
 #	./debian/rules get-po
 
 PKG="byobu"
-DATA="$HOME/.$PKG"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
-mkdir -p "$DATA"
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
-[ -z "$BYOBU_PREFIX" ] && export BYOBU_PREFIX="/usr"
-export BYOBU_PREFIX
-[ -r "/etc/$PKG/socketdir" ] && . "/etc/$PKG/socketdir" || SOCKETDIR="/var/run/screen"
 
 TEXTDOMAIN="$PKG"
 
@@ -65,7 +62,7 @@ EOT
 
 # Initialize variables
 FILE="$HOME"/."$PKG"/color
-PROFILE="$DATA/profile"
+PROFILE="$BYOBU_CONFIG_DIR/profile"
 [ -r "$PROFILE" ] || ln -sf $BYOBU_PREFIX/share/$PKG/profiles/common "$PROFILE"
 selected=-1
 color=
@@ -80,7 +77,7 @@ assert_symlink() {
 }
 
 # If these files exist, they must be a symlink
-assert_symlink "$DATA/profile"
+assert_symlink "$BYOBU_CONFIG_DIR/profile"
 
 listprofiles() {
 	# Display list of profiles, one per line
@@ -179,13 +176,13 @@ setcolor() {
 	fi
 	[ "$MONOCHROME" = "1" ] || MONOCHROME=0
 	printf "FOREGROUND=$FOREGROUND\nBACKGROUND=$BACKGROUND\nMONOCHROME=$MONOCHROME" > $FILE
-	touch "$SOCKETDIR/S-$USER/$PKG.reload-required"
+	touch "$BYOBU_RUN_DIR/reload-required"
 }
 
 if [ $# -eq 0 ]; then
 	prompt "background"
 	prompt "foreground"
-	screen -X at 0 source "$DATA/profile"
+	screen -X at 0 source "$BYOBU_CONFIG_DIR/profile"
 else
 	while true; do
 		case "$1" in

usr/bin/byobu-shell

@@ -18,7 +18,10 @@
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 PKG="byobu"
-FLAG="$HOME/.$PKG/.welcome-displayed"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
+FLAG="$BYOBU_CONFIG_DIR/.welcome-displayed"
 
 [ -r /etc/motd ] && cat /etc/motd
 

usr/bin/byobu-silent

@@ -17,9 +17,11 @@
 #    You should have received a copy of the GNU General Public License
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-
 PKG="byobu"
-FLAG="$HOME/.$PKG/status.disable"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
+FLAG="$BYOBU_CONFIG_DIR/status.disable"
 
 # Clean up environment
 sed -i "/caption/d" "$HOME/.$PKG/keybindings" || true

usr/bin/byobu-status

@@ -18,8 +18,8 @@
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 PKG="byobu"
-DATA="$HOME/.$PKG"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
-[ -z "$BYOBU_PREFIX" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
 
 if ! . "${BYOBU_PREFIX}/lib/${PKG}/.shutil"; then
 	echo "failed to source ${BYOBU_PREFIX}/lib/${PKG}/.shutil" 2>&1
@@ -56,10 +56,10 @@ color() {
 }
 
 # Source configurations
-[ -r "$DATA/color" ] && . "$DATA/color"
+[ -r "$BYOBU_CONFIG_DIR/color" ] && . "$BYOBU_CONFIG_DIR/color"
 [ -r "/etc/$PKG/statusrc" ] && . "/etc/$PKG/statusrc"
-[ -r "$DATA/status" ] && . "$DATA/status"
+[ -r "$BYOBU_CONFIG_DIR/status" ] && . "$BYOBU_CONFIG_DIR/status"
-[ -r "$DATA/statusrc" ] && . "$DATA/statusrc"
+[ -r "$BYOBU_CONFIG_DIR/statusrc" ] && . "$BYOBU_CONFIG_DIR/statusrc"
 
 export P="$1"
 case "$P" in

usr/bin/byobu-status-detail

@@ -17,6 +17,10 @@
 #    You should have received a copy of the GNU General Public License
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
+PKG="byobu"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
 if which vim >/dev/null && `vim --version | grep -q +folding`; then
 	byobu-status --detail | vim -c "set foldmethod=indent" -c "set foldminlines=0" -c "set foldnestmax=1"  -c "set foldcolumn=2" -R -
 else

usr/bin/byobu-ugraph

@@ -24,6 +24,10 @@
 #
 #---------------------------------------------------------------------
 
+PKG="byobu"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
 script_name=${0##*/}
 min_default=0
 max_default=100

usr/bin/byobu-ulevel

@@ -35,6 +35,10 @@
 # you can always change the ordering of these values using the 'invert'
 # command-line option.
 
+PKG="byobu"
+[ -z "${BYOBU_PREFIX}" ] && export BYOBU_PREFIX="/usr" || export BYOBU_PREFIX
+. "${BYOBU_PREFIX}/lib/${PKG}/.common"
+
 circles_2=(○ ●)
 diamonds_2=(◇ ◆)
 flags_2=(⚐ ⚑)

usr/lib/byobu/.common

@@ -0,0 +1,22 @@
+#!/bin/sh
+#
+#    .common: common stuff sourced by all scripts
+#
+#    Copyright (C) 2011 Dustin Kirkland
+#
+#    Authors: Dustin Kirkland <kirkland@ubuntu.com>
+#
+#    This program is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, version 3 of the License.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+. "${BYOBU_PREFIX}/lib/${PKG}/.shutil"
+. "${BYOBU_PREFIX}/lib/${PKG}/.constants"

usr/lib/byobu/.constants

@@ -19,16 +19,29 @@
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 PKG="byobu"
-CONFIG_DIR="$HOME/.$PKG"
+BYOBU_VERSION="4.17"
-mkdir -p "$CONFIG_DIR"
+
-if mkdir -p "/var/run/screen/S-$USER/$PKG/cache" 2>/dev/null; then
+# Create and set the user configuration directory
-	CACHE_DIR="/var/run/screen/S-$USER/$PKG/cache"
+BYOBU_CONFIG_DIR="$HOME/.$PKG"
+mkdir -p "$BYOBU_CONFIG_DIR"
+
+# Grab the global, then local socket directory
+[ -r "/etc/$PKG/socketdir" ] && . "/etc/$PKG/socketdir"
+[ -r "$BYOBU_CONFIG_DIR/socketdir" ] && . "$BYOBU_CONFIG_DIR/socketdir"
+
+# Hopefully, we can make a runtime data directory in a tmpfs
+if mkdir -p "$SOCKETDIR/S-$USER/$PKG" 2>/dev/null; then
+	BYOBU_RUN_DIR="$SOCKETDIR/S-$USER/$PKG"
 else
-	mkdir -p "$CONFIG_DIR/cache"
+	# But if not, we'll use a cache direcotry
-	CACHE_DIR="$CONFIG_DIR/cache"
+	mkdir -p "$HOME/.cache/$PKG"
+	BYOBU_RUN_DIR="$HOME/.cache/$PKG"
 fi
+
+# Some users build and install byobu themselves, rather than from a distro
 [ -n "$BYOBU_PREFIX" ] || BYOBU_PREFIX="/usr"
 
+# UTF8 support in the hardstatus is coming one day in screen
 if [ "$UTF8" = "1" ]; then
 	ICON_C="℃"
 	ICON_F="℉"

usr/lib/byobu/.notify_osd

@@ -25,7 +25,7 @@ $sleep = 5;
 while (<STDIN>) {
 	# Ensure that the notify_osd indicator is enabled
 	my $skip = 0;
-	open(F, "<$ENV{HOME}/.$PKG/status");
+	open(F, "<$ENV{BYOBU_CONFIG_DIR}/status");
 	foreach my $i (<F>) {
 		if ($i =~ /notify_osd=0/) {
 			$skip = 1;

usr/lib/byobu/.shutil

@@ -49,8 +49,8 @@ fail() {
 
 find_script() {
 	# Allow for local status scripts
-	if [ -x "$DATA/bin/$1" ]; then
+	if [ -x "$BYOBU_CONFIG_DIR/bin/$1" ]; then
-		_RET="$DATA/bin/$1"
+		_RET="$BYOBU_CONFIG_DIR/bin/$1"
 	elif [ -x "$BYOBU_PREFIX/lib/$PKG/$1" ]; then
 		_RET="$BYOBU_PREFIX/lib/$PKG/$1"
 	elif [ -x "$BYOBU_PREFIX/libexec/$PKG/$1" ]; then

usr/lib/byobu/Makefile.am

@@ -1,3 +1,3 @@
 libdirdir = $(prefix)/lib/@PACKAGE@
-libdir_SCRIPTS = apport  arch  battery  cpu_count  cpu_freq  cpu_temp  custom  date  disk  disk_io  ec2_cost  fan_speed  hostname  ip_address  load_average  logo  mail  mem_available  mem_used  menu  network  .notify_osd  notify_osd  processes  raid  rcs_cost  reboot_required  release  services  swap  time  time_binary time_utc trash updates_available  uptime  users  whoami  wifi_quality .constants .shutil
+libdir_SCRIPTS = apport  arch  battery  cpu_count  cpu_freq  cpu_temp  custom  date  disk  disk_io  ec2_cost  fan_speed  hostname  ip_address  load_average  logo  mail  mem_available  mem_used  menu  network  .notify_osd  notify_osd  processes  raid  rcs_cost  reboot_required  release  services  swap  time  time_binary time_utc trash updates_available  uptime  users  whoami  wifi_quality .common .constants .shutil
 

usr/lib/byobu/custom

@@ -24,9 +24,9 @@ __custom_detail() {
 }
 
 __custom() {
-	local cache="$CACHE_DIR/custom"
+	local cache="$BYOBU_RUN_DIR/custom"
 	local i= output=
-	for i in "$HOME/.$PKG/bin/"[0-9]*_*; do
+	for i in "$BYOBU_CONFIG_DIR/bin/"[0-9]*_*; do
 		# Loop over custom scripts
 		[ -x "$i" ] || continue
 		local now="$(date +%s)"

usr/lib/byobu/disk_io

@@ -45,7 +45,7 @@ __disk_io() {
 	# Default to disk providing /, but let users override with MONITORED_DISK
 	[ -z "$MONITORED_DISK" ] && mount_point="/" ||  mount_point="$MONITORED_DISK"
 	# By default, we won't bug the user with the display of network traffic
-	# below DISK_IO_THRESHOLD in kB/s; override in $CONFIG_DIR/status
+	# below DISK_IO_THRESHOLD in kB/s; override in $BYOBU_CONFIG_DIR/status
 	[ -n "$DISK_IO_THRESHOLD" ] || DISK_IO_THRESHOLD=50
 	case "$mount_point" in
 		/dev/*) part="${mount_point}";;
@@ -55,7 +55,7 @@ __disk_io() {
 	local disk=${_RET}
 	local t2=`date +%s` t1=
 	for i in "read" "write"; do
-		local cache="$CACHE_DIR/disk.$i"
+		local cache="$BYOBU_RUN_DIR/disk.$i"
 		t1=`stat -c %Y "$cache"` 2>/dev/null || t1=0
 		local unit="kB/s"
 		local rate= x1= x2= symbol= unit=

usr/lib/byobu/ec2_cost

@@ -39,7 +39,7 @@ __ec2_cost() {
 		. "$BYOBU_PREFIX/share/$PKG/ec2/rates.${zone%?}"
 		type=$(wget -q -O - http://169.254.169.254/latest/meta-data/instance-type | sed -e "s/\./_/g")
 		eval rate="\$$type"
-		file_to_stat="$CACHE_DIR/ec2_cost.instance_type"
+		file_to_stat="$BYOBU_RUN_DIR/ec2_cost.instance_type"
 		[ -f "$file_to_stat" ] || wget -q -O "$file_to_stat" http://169.254.169.254/latest/meta-data/instance-type
 	else
 		. "$BYOBU_PREFIX/share/$PKG/ec2/rates."*

usr/lib/byobu/ip_address

@@ -27,7 +27,7 @@ __ip_address_detail() {
 
 __ip_address() {
 	local interface ipaddr
-	# Allow interface overrides in $CONFIG_DIR/statusrc
+	# Allow interface overrides in $BYOBU_CONFIG_DIR/statusrc
 	if [ -n "$MONITORED_NETWORK" ]; then
 		interface="$MONITORED_NETWORK"
 	else

usr/lib/byobu/logo

@@ -22,7 +22,7 @@
 get_distro() {
 	_RET=
 	if [ -n "$DISTRO" ]; then
-		# Allow manual override of distro in $CONFIG_DIR/status
+		# Allow manual override of distro in $BYOBU_CONFIG_DIR/status
 		_RET="$DISTRO"
 	elif [ -r "/etc/issue" ]; then
 		# Otherwise, check /etc/issue
@@ -45,7 +45,7 @@ __logo_detail() {
 __logo() {
 	local logo=
 	if [ -n "$LOGO" ]; then
-		# Allow users to define their own logo in $CONFIG_DIR/status
+		# Allow users to define their own logo in $BYOBU_CONFIG_DIR/status
 		printf "%s" "$LOGO"
 		return
 	fi

usr/lib/byobu/mem_available

@@ -25,7 +25,7 @@ __mem_available_detail() {
 
 __mem_available() {
 	local mem_used comma whitespace unit mem name
-	. "$CONFIG_DIR/status"
+	. "$BYOBU_CONFIG_DIR/status"
 	[ "$mem_used" = "1" ] && comma="," || whitespace=" "
 	read name mem unit < /proc/meminfo
 	if [ $mem -ge 1048576 ]; then

usr/lib/byobu/menu

@@ -25,7 +25,7 @@ __menu_detail() {
 
 __menu() {
 	local bindings esc key text
-	[ -r "$CONFIG_DIR/keybindings" ] && bindings="$CONFIG_DIR/keybindings" || bindings="$HOME/.screenrc"
+	[ -r "$BYOBU_CONFIG_DIR/keybindings" ] && bindings="$BYOBU_CONFIG_DIR/keybindings" || bindings="$HOME/.screenrc"
 	if grep -qs "^source.*screen-escape-keys$" $bindings 2>/dev/null || [ "$1" = "--disable-f-keys" ]; then
 		esc=`grep "^escape" $bindings | sed "s/^.*\(.\)$/\1/"`
 		[ -n "$esc" ] && key="^$esc-@" || key="^a-@"

usr/lib/byobu/network

@@ -21,7 +21,7 @@
 
 get_interface() {
 	_RET=
-	# Allow interface overrides in $CONFIG_DIR/status
+	# Allow interface overrides in $BYOBU_CONFIG_DIR/status
 	if [ -n "$MONITORED_NETWORK" ]; then
 		_RET="$MONITORED_NETWORK"
 	else
@@ -38,7 +38,7 @@ __network_detail() {
 __network() {
 	get_interface; local interface="$_RET"
 	# By default, we won't bug the user with the display of network traffic
-	# below NETWORK_THRESHOLD in kbps; override in $CONFIG_DIR/status
+	# below NETWORK_THRESHOLD in kbps; override in $BYOBU_CONFIG_DIR/status
 	[ -n "$NETWORK_THRESHOLD" ] || NETWORK_THRESHOLD=20
 	t2=`date +%s`
 	OIFS=$IFS
@@ -48,7 +48,7 @@ __network() {
 			up) symbol="$ICON_UP" ;;
 			down) symbol="$ICON_DN" ;;
 		esac
-		cache="$CACHE_DIR/network.$i"
+		cache="$BYOBU_RUN_DIR/network.$i"
 		t1=`stat -c %Y "$cache"` 2>/dev/null || t1=0
 		if [ $t2 -le $t1 ]; then
 			rate=0

usr/lib/byobu/reboot_required

@@ -20,7 +20,7 @@
 #    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 REBOOT_FLAG="/var/run/reboot-required"
-RELOAD_FLAG="$CACHE_DIR/reload-required"
+RELOAD_FLAG="$BYOBU_RUN_DIR/reload-required"
 
 __reboot_required_detail() {
 		[ -e "$REBOOT_FLAG" ] && ls -alF "$REBOOT_FLAG" 2>&1

usr/lib/byobu/services

@@ -44,7 +44,7 @@ service_running() {
 
 __services() {
 	local services=
-	# Users can define a list of services to monitor in $CONFIG_DIR/status
+	# Users can define a list of services to monitor in $BYOBU_CONFIG_DIR/status
 	if [ -z "$services" ]; then
 		if [ -f "/etc/eucalyptus/eucalyptus.conf" ]; then
 			# If the user has not defined any services, but this system is a

usr/lib/byobu/updates_available

@@ -96,7 +96,7 @@ __updates_available_detail() {
 }
 
 __updates_available() {
-	local mycache="$CACHE_DIR/updates-available"
+	local mycache="$BYOBU_RUN_DIR/updates-available"
 	# If mycache is present, use it
 	[ -r $mycache ] && ___print_updates `sed -n '/[^0-9]/s/ .*$//p' $mycache`
 	# If we really need to do so (mycache doesn't exist, or the package database has changed),

usr/share/byobu/keybindings/common

@@ -1 +0,0 @@
-f-keys

usr/share/byobu/keybindings/common

@@ -0,0 +1,82 @@
+###############################################################################
+#    Byobu f-key keybindings
+#      This configuration profile is intended to provide a useful
+#      keybindings using the keyboard's f-keys
+#
+#    Copyright (C) 2008-2011	Dustin Kirkland <kirkland@ubuntu.com>
+#				Nick Barcet <nick.barcet@canonical.com>
+#
+#    This program is free software: you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation, version 3 of the License.
+#
+#    This program is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+###############################################################################
+
+# Byobu's escape key is ASCII Dec:94, Hex:5E, Oct:136, Char: ctrl-^ -- ctrl-caret
+# which is bound to F12
+escape ^^^^
+register x "^^"						#     | Goes with the F12 definition
+
+# F-keys seem to work well in both gnome-terminal and tty consoles
+bindkey -k k1 screen -t config 0 byobu-config		# F1  | Configuration (along with F9)
+							#     | since F1 = Help in gnome-terminal
+bindkey -k k2 screen					# F2  | Create new window
+bindkey -k k3 eval 'prev' 'fit'				# F3  | Previous Window
+bindkey -k k4 eval 'next' 'fit'				# F4  | Next Window
+register r ":source $HOME/.byobu/profile^M"		#     | Goes with F5 definition
+bindkey -k k5 eval 'process x' 'process r'		# F5  | Reload profile
+bindkey -k k6 detach					# F6  | Detach from this session
+bindkey -k k7 copy					# F7  | Enter copy/scrollback mode
+register t "A^[OH^k^h"					#     | Goes with the F8 definition
+bindkey -k k8 eval 'process x' 'process t'		# F8  | Re-title a window
+bindkey -k k9 screen -t config 0 byobu-config		# F9  | Configuration
+							# F10 | 'toolbar' in gnome-terminal
+							# F11 | 'fullscreen' in gnome-terminal
+bindkey -k F2 process x					# F12 | Byobu's escape key
+bind $ screen -t status 0 byobu-status-detail 		# F12 $ | show detailed status
+bind @ screen -t config 0 byobu-config			# F12 @ | Configuration
+bind R process r					# F12 R | Reload profile
+register s "[g G$>^h"					# Goes with F12 ~ definition
+bind ~ eval 'process x' 'process s' 'exec sed -i -e "/./,/^$/!d" $BYOBU_RUN_DIR/printscreen' 'screen -t PRINTSCREEN view $BYOBU_RUN_DIR/printscreen' # F12 ~ | write the buffer to file, open in a new window
+
+# Hotkeys for splits (gnome-terminal)
+bindkey "^[O1;2Q" eval 'split' 'focus down' 'next' 'focus up' 'layout save byobu' 'layout autosave'	# shift-F2 | horizontal split
+bindkey "^[O1;5Q" eval 'split -v' 'focus down' 'next' 'focus up' 'layout save byobu' 'layout autosave'	# ctrl-F2  | vertical split
+bindkey "^[O1;2R" focus up						# shift-F3 | focus up
+bindkey "^[O1;2S" focus down						# shift-F4 | focus down
+bindkey "^[[15;2~" only							# shift-F5 | kill all splits
+bindkey "^[[17;5~" remove						# ctrl-F6  | kill this split
+
+# Hotkeys for splits (tty)
+bindkey "^[[26~" eval 'split' 'focus down' 'next' 'focus up'		# shift-F2 | horizontal split
+									# ctrl-F2  | sadly, does not work in tty :-(
+bindkey "^[[28~" focus up						# shift-F3 | focus up
+bindkey "^[[29~" focus down						# shift-F4 | focus down
+bindkey "^[[31~" only							# shift-F5 | kill all splits
+									# ctrl-F6  | sadly, does not work in tty :-(
+
+# Make it more logical how to enter scrollback
+register p "^[[5~"
+bindkey "^[[5;3~" eval 'msgwait 0' 'msgminwait 0' 'copy' 'process p'		# alt-pageup | scrollback
+register n "^[[6~"
+bindkey "^[[6;3~" eval 'msgwait 0' 'msgminwait 0' 'copy' 'process n'		# alt-pagedn | scrollback
+
+# Make socket reconnection a little easier
+bindkey "^[[15;5~" eval 'process x' 'process r' 'stuff ". $BYOBU_PREFIX/bin/byobu-reconnect-sockets^M"' # ctrl-F5 | reconnect gpg/ssh/x sockets
+
+# Detach from an auto-launched byobu, but don't log out of the shell
+bindkey "^[[17;2~" eval 'exec touch $BYOBU_RUN_DIR/no-logout' 'detach'   # shift-F6 | detach, but don't logout
+bindkey "^[[32~" eval 'exec touch $BYOBU_RUN_DIR/no-logout' 'detach'	# shift-F6 | detach, but don't logout
+
+# toggle f-key keybindings off
+register d ":source $BYOBU_PREFIX/share/byobu/keybindings/screen-escape-keys^M"
+bind ! eval 'process x' 'process d' 'backtick 111 9999999 9999999 byobu-status menu --disable-f-keys'	# F12 ! | toggle on/off f-keys
+
+bindkey "^A" screen -t ctrl-a byobu-ctrl-a

usr/share/byobu/keybindings/f-keys

@@ -44,7 +44,7 @@ bind $ screen -t status 0 byobu-status-detail 		# F12 $ | show detailed status
 bind @ screen -t config 0 byobu-config			# F12 @ | Configuration
 bind R process r					# F12 R | Reload profile
 register s "[g G$>^h"					# Goes with F12 ~ definition
-bind ~ eval 'process x' 'process s' 'exec sed -i -e "/./,/^$/!d" /var/run/screen/S-$USER/printscreen' 'screen -t PRINTSCREEN view /var/run/screen/S-$USER/printscreen' # F12 ~ | write the buffer to file, open in a new window
+bind ~ eval 'process x' 'process s' 'exec sed -i -e "/./,/^$/!d" $BYOBU_RUN_DIR/printscreen' 'screen -t PRINTSCREEN view $BYOBU_RUN_DIR/printscreen' # F12 ~ | write the buffer to file, open in a new window
 
 # Hotkeys for splits (gnome-terminal)
 bindkey "^[O1;2Q" eval 'split' 'focus down' 'next' 'focus up' 'layout save byobu' 'layout autosave'	# shift-F2 | horizontal split
@@ -72,8 +72,8 @@ bindkey "^[[6;3~" eval 'msgwait 0' 'msgminwait 0' 'copy' 'process n'		# alt-page
 bindkey "^[[15;5~" eval 'process x' 'process r' 'stuff ". $BYOBU_PREFIX/bin/byobu-reconnect-sockets^M"' # ctrl-F5 | reconnect gpg/ssh/x sockets
 
 # Detach from an auto-launched byobu, but don't log out of the shell
-bindkey "^[[17;2~" eval 'exec touch /var/run/screen/S-$USER/byobu.no-logout' 'detach'   # shift-F6 | detach, but don't logout
+bindkey "^[[17;2~" eval 'exec touch $BYOBU_RUN_DIR/no-logout' 'detach'   # shift-F6 | detach, but don't logout
-bindkey "^[[32~" eval 'exec touch /var/run/screen/S-$USER/byobu.no-logout' 'detach'	# shift-F6 | detach, but don't logout
+bindkey "^[[32~" eval 'exec touch $BYOBU_RUN_DIR/no-logout' 'detach'	# shift-F6 | detach, but don't logout
 
 # toggle f-key keybindings off
 register d ":source $BYOBU_PREFIX/share/byobu/keybindings/screen-escape-keys^M"

usr/share/byobu/profiles/common

@@ -97,7 +97,7 @@ defbce "on"
 defscrollback 10000
 
 # Set per-user screen-exchange
-bufferfile /var/run/screen/S-$USER/printscreen
+bufferfile $BYOBU_RUN_DIR/printscreen
 compacthist on
 
 # Monitor windows

usr/share/man/man1/byobu-select-session.1

@@ -7,15 +7,15 @@ byobu\-select\-session \- select and connect to a byobu session
 
 If an invalid selection is chosen 3 times in a row, the user is connected to the youngest session.
 
-By default, if only one session exists, the user is connected to that session, and if no sessions exist, a new session is created -- such that there is no interactive prompt in the normal behavior.  However, some users may choose to always be prompted, by touching the file $DATA/.always-select.
+By default, if only one session exists, the user is connected to that session, and if no sessions exist, a new session is created -- such that there is no interactive prompt in the normal behavior.  However, some users may choose to always be prompted, by touching the file $BYOBU_CONFIG_DIR/.always-select.
 
-Note that DATA=$HOME/.byobu.
+Note that BYOBU_CONFIG_DIR=$HOME/.byobu.
 
 Named sessions that begin with a "." are "hidden" from \fBbyobu\-select\-session\fP(1).  This is useful, for instance, if you do not want a session to be automatically selected at login.  Example:
   byobu \-S .hidden
 
 .SH "FILES"
-\fI$DATA/.always-select\fP
+\fI$BYOBU_CONFIG_DIR/.always-select\fP
 
 .SH "SEE ALSO"
 .PD 0

usr/share/man/man1/byobu.1

@@ -10,7 +10,7 @@ Options to \fBbyobu\fP are simply passed through \fBscreen\fP(1).
 .SH DESCRIPTION
 \fBbyobu\fP is a script that launches GNU screen in the byobu configuration.  This enables the display of system information and status notifications within two lines at the bottom of the screen session. It also enables multiple tabbed terminal sessions, accessible through simple keystrokes.
 
-Note that DATA=\fI$HOME/.byobu\fP.
+Note that BYOBU_CONFIG_DIR=\fI$HOME/.byobu\fP.
 
 .SH STATUS NOTIFICATIONS
 
@@ -20,24 +20,24 @@ Note that DATA=\fI$HOME/.byobu\fP.
 
 \fBarch\fP \- system architecture; displayed on the lower bar toward the left, in the default text color on the default background color
 
-\fBbattery\fP \- battery information; display on the lower bar toward the right; |\-| indicates discharging, |+| indicates charging, |=| indicates fully charged;  when charging or discharging, the current battery capacity as a percentage is displayed;  the colours green, yellow, and red are used to give further indication of the battery's charge state; you may override the detected battery by setting BATTERY=/proc/acpi/battery/BAT0 in \fI$DATA/statusrc\fP
+\fBbattery\fP \- battery information; display on the lower bar toward the right; |\-| indicates discharging, |+| indicates charging, |=| indicates fully charged;  when charging or discharging, the current battery capacity as a percentage is displayed;  the colours green, yellow, and red are used to give further indication of the battery's charge state; you may override the detected battery by setting BATTERY=/proc/acpi/battery/BAT0 in \fI$BYOBU_CONFIG_DIR/statusrc\fP
 
 \fBcpu_count\fP \- the number of cpu's or cores on the system; displayed in the lower bar toward the right in the default text color on the default background, followed by a trailing 'x'
 
 \fBcpu_freq\fP \- the current frequency of the cpu in GHz; displayed in the lower bar toward the right in white text on a light blue background
 
-\fBcpu_temp\fP \- the cpu temperature in Celsius (default) or Fahrenheit, configure TEMP=F or TEMP=C in \fI$DATA/statusrc\fP; displayed in the lower bar toward the right in yellow text on a black background; you may override the detected cpu temperature device by setting MONITORED_TEMP=/proc/acpi/whatever in \fI$DATA/statusrc\fP
+\fBcpu_temp\fP \- the cpu temperature in Celsius (default) or Fahrenheit, configure TEMP=F or TEMP=C in \fI$BYOBU_CONFIG_DIR/statusrc\fP; displayed in the lower bar toward the right in yellow text on a black background; you may override the detected cpu temperature device by setting MONITORED_TEMP=/proc/acpi/whatever in \fI$BYOBU_CONFIG_DIR/statusrc\fP
 
-\fBcustom\fP \- user defined custom scripts; must be executable programs of any kind in \fI$DATA/bin\fP; must be named N_NAME, where N is the frequency in seconds to refresh the status indicator, and NAME is the name of the script; N should not be less than 5 seconds; the script should echo a small amount of text to standard out, standard error is discarded; the indicator will be displayed in the lower panel, in inverted colors to your current background/foreground scheme, unless you manually specify the colors in your script's output; BEWARE, cpu-intensive custom scripts may impact your overall system performance and could upset your system administrator!
+\fBcustom\fP \- user defined custom scripts; must be executable programs of any kind in \fI$BYOBU_CONFIG_DIR/bin\fP; must be named N_NAME, where N is the frequency in seconds to refresh the status indicator, and NAME is the name of the script; N should not be less than 5 seconds; the script should echo a small amount of text to standard out, standard error is discarded; the indicator will be displayed in the lower panel, in inverted colors to your current background/foreground scheme, unless you manually specify the colors in your script's output; BEWARE, cpu-intensive custom scripts may impact your overall system performance and could upset your system administrator!
-  Example: \fI$DATA/bin/1000_uname\fP
+  Example: \fI$BYOBU_CONFIG_DIR/bin/1000_uname\fP
     #!/bin/sh
     printf "\\005{= bw}%s\\005{\-}" "$(uname \-r)"
 
 \fBdate\fP \- the system date in YYYY-MM-DD formate; displayed in the lower on the far right in the default text color on the default background
 
-\fBdisk\fP \- total disk space available and total used on / directory; displayed in the lower bar on the far right in white text on a light purple background; override the default directory by specifying an alternate mount point with MONITORED_DISK=/wherever in \fI$DATA/statusrc\fP
+\fBdisk\fP \- total disk space available and total used on / directory; displayed in the lower bar on the far right in white text on a light purple background; override the default directory by specifying an alternate mount point with MONITORED_DISK=/wherever in \fI$BYOBU_CONFIG_DIR/statusrc\fP
 
-\fBdisk_io\fP \- instantaneous read/write througput in kB/s or MB/s over the last 3 seconds; displayed in the lower bar toward the right in white text on a light purple background with a leading '<' sign indicating 'read speed' and '>' sign indicating 'write speed'; override the default monitored disk by specifying an alternate device with MONITORED_DISK=/dev/sdb, and override the default DISK_IO_THRESHOLD=50 (kB/s) in \fI$DATA/statusrc\fP
+\fBdisk_io\fP \- instantaneous read/write througput in kB/s or MB/s over the last 3 seconds; displayed in the lower bar toward the right in white text on a light purple background with a leading '<' sign indicating 'read speed' and '>' sign indicating 'write speed'; override the default monitored disk by specifying an alternate device with MONITORED_DISK=/dev/sdb, and override the default DISK_IO_THRESHOLD=50 (kB/s) in \fI$BYOBU_CONFIG_DIR/statusrc\fP
 
 \fBec2_cost\fP \- an estimation of the cost of the current boot of the system in terms of the Amazon EC2 billing model; displayed in the lower bar toward the right in green text on a black background; there is a leading '~' to indicate that this is an estimation, and the monetary units are US Dollars '$'
 
@@ -49,11 +49,11 @@ Note that DATA=\fI$HOME/.byobu\fP.
 
 \fBhostname\fP \- the hostname of the system; displayed in the upper bar on the far right in bold black text on a grey background; there is a leading '@' symbol if the username status is also enabled
 
-\fBip_address\fP \- the IPv4 address of the system in dotted decimal form; displayed in the upper bar on the far right in bold black text on a grey background;  you can override and display your IPv6 address by setting 'IPV6=1' in \fI$DATA/statusrc\fP
+\fBip_address\fP \- the IPv4 address of the system in dotted decimal form; displayed in the upper bar on the far right in bold black text on a grey background;  you can override and display your IPv6 address by setting 'IPV6=1' in \fI$BYOBU_CONFIG_DIR/statusrc\fP
 
 \fBload_average\fP \- the system load average over the last 1 minute; displayed in the lower bar toward the right in black text on a yellow background
 
-\fBlogo\fP \- an approximation of the current operating system's logo; displayed in the lower bar on the far left; you may customize this logo by setting a chosen logo in \fI$DATA/logo\fP, or you may override this with LOGO=:-D in \fI$DATA/statusrc\fP
+\fBlogo\fP \- an approximation of the current operating system's logo; displayed in the lower bar on the far left; you may customize this logo by setting a chosen logo in \fI$BYOBU_CONFIG_DIR/logo\fP, or you may override this with LOGO=:-D in \fI$BYOBU_CONFIG_DIR/statusrc\fP
 
 \fBmail\fP \- system mail for the current user; the letter '[M]' is displayed in the lower bar toward the left in black text on a grey background
 
@@ -63,7 +63,7 @@ Note that DATA=\fI$HOME/.byobu\fP.
 
 \fBmenu\fP \- a simple indicator directing new users to use the F9 keybinding to access the byobu menu
 
-\fBnetwork\fP \- instantaneous upload/download bandwidth in [GMk]bps over the last 3 seconds; nothing is displayed if traffic is 0; displayed in the lower bar toward the left in white text on a purple background with a leading '^' sign indicating 'up' and 'v' sign indicating 'down'; override the default interface by specifying an alternate interface with MONITORED_NETWORK=eth1, and override the default units (bits) with NETWORK_UNITS=bytes, and override the default NETWORK_THRESHOLD=20 (kbps) in \fI$DATA/statusrc\fP
+\fBnetwork\fP \- instantaneous upload/download bandwidth in [GMk]bps over the last 3 seconds; nothing is displayed if traffic is 0; displayed in the lower bar toward the left in white text on a purple background with a leading '^' sign indicating 'up' and 'v' sign indicating 'down'; override the default interface by specifying an alternate interface with MONITORED_NETWORK=eth1, and override the default units (bits) with NETWORK_UNITS=bytes, and override the default NETWORK_THRESHOLD=20 (kbps) in \fI$BYOBU_CONFIG_DIR/statusrc\fP
 
 \fBnotify_osd\fP \- Send on-screen notification messages to screen's notification buffer
 
@@ -71,15 +71,15 @@ Note that DATA=\fI$HOME/.byobu\fP.
 
 \fBreboot_required\fP \- symbol present if a reboot is required following a system update; displayed in the lower bar white text on a blue background by the symbol '(R)'; additionally, reboot_required will print '<F5>' in white text on a blue background, if Byobu requires you to reload your profile to affect some changes.
 
-\fBrelease\fP \- distribution and version information about the release running on the current system as reported by \fBlsb_release(1)\fP or \fI/etc/issue\fP; displayed in the lower bar in bold black text toward the left on a grey background; you may override the detected release with DISTRO=Whatever in \fI$DATA/statusrc\fP
+\fBrelease\fP \- distribution and version information about the release running on the current system as reported by \fBlsb_release(1)\fP or \fI/etc/issue\fP; displayed in the lower bar in bold black text toward the left on a grey background; you may override the detected release with DISTRO=Whatever in \fI$BYOBU_CONFIG_DIR/statusrc\fP
 
-\fBservices\fP \- users can configure a list of services to monitor, define the SERVICES variable in \fI$DATA/statusrc\fP, a whitespace separated of services, each service should include the init name of the service, then a pipe, and then an abbreviated name or symbol to display when running (e.g. SERVICES="ssh|ssh apache2|http"); displayed in the lower bar toward the center in cyan on a white background
+\fBservices\fP \- users can configure a list of services to monitor, define the SERVICES variable in \fI$BYOBU_CONFIG_DIR/statusrc\fP, a whitespace separated of services, each service should include the init name of the service, then a pipe, and then an abbreviated name or symbol to display when running (e.g. SERVICES="ssh|ssh apache2|http"); displayed in the lower bar toward the center in cyan on a white background
 
 \fBswap\fP \- total swap space and total used as a percentage of the total available; displayed in the lower bar toward the right in white text on a light green background with a trailing '%' sign
 
 \fBtime\fP \- the system time in HH:MM:SS format; displayed in the lower bar on the far right in the default text and default background colors
 
-\fBtime_binary\fP \- only for the hard core geek, the local system time in binary; requires UTF8 support in a VERY recent version of GNU Screen; you must additionally set "UTF8=1" in \fI$DATA/statusrc\fP; displayed in the lower bar on the far right in the default text and background colors
+\fBtime_binary\fP \- only for the hard core geek, the local system time in binary; requires UTF8 support in a VERY recent version of GNU Screen; you must additionally set "UTF8=1" in \fI$BYOBU_CONFIG_DIR/statusrc\fP; displayed in the lower bar on the far right in the default text and background colors
 
 \fBtime_utc\fP \- the UTC system time in HH:MMformat; displayed in the lower bar on the far right in dark text on a light background
 
@@ -91,7 +91,7 @@ Note that DATA=\fI$HOME/.byobu\fP.
 
 \fBwhoami\fP \- the name of the user who owns the screen session; displayed in the upper bar toward the far right in bold black text on a grey background
 
-\fBwifi_quality\fP \- the connection rate and signal quality of the wifi connection; displayed in the lower bar toward the right in black text on a cyan background; the connection rate is in 'Mb/s' and the signal quality is as a percentage with a trailing '%'; override the default interface by specifying an alternate interface with MONITORED_NETWORK=wlan0 in \fI$DATA/statusrc\fP
+\fBwifi_quality\fP \- the connection rate and signal quality of the wifi connection; displayed in the lower bar toward the right in black text on a cyan background; the connection rate is in 'Mb/s' and the signal quality is as a percentage with a trailing '%'; override the default interface by specifying an alternate interface with MONITORED_NETWORK=wlan0 in \fI$BYOBU_CONFIG_DIR/statusrc\fP
 
 .SH SESSIONS
 
@@ -103,12 +103,12 @@ Byobu name screen sessions "byobu", if unspecified.  To hide sessions from \fBby
 
 Each open window in the screen session is displayed in the upper bar toward the far left.  These are numbered, and include indicators as to activity in the window (see "activity" in \fBscreen\fP(1) for symbol definitions).  The current active window is highlighted by inverting the background/text from the rest of the window bar.
 
-Users can create a list of windows to launch at startup in \fI$DATA/windows\fP.  This file is the same syntax as \fI~/.screenrc\fP, each line specifying a window using the "screen" command, as described in \fBscreen\fP(1).
+Users can create a list of windows to launch at startup in \fI$BYOBU_CONFIG_DIR/windows\fP.  This file is the same syntax as \fI~/.screenrc\fP, each line specifying a window using the "screen" command, as described in \fBscreen\fP(1).
 
-User can also launch Byobu with unique window sets.  Users can store these as \fI$DATA/windows.[NAME]\fP, and launch Byobu with the environment variable \fBBYOBU_WINDOWS\fP.
+User can also launch Byobu with unique window sets.  Users can store these as \fI$BYOBU_CONFIG_DIR/windows.[NAME]\fP, and launch Byobu with the environment variable \fBBYOBU_WINDOWS\fP.
 
 For example:
-  $ cat $DATA/windows.ssh_sessions
+  $ cat $BYOBU_CONFIG_DIR/windows.ssh_sessions
   screen \-t localhost bash
   screen \-t aussie ssh root@aussie
   screen \-t beagle ssh root@beagle
@@ -172,7 +172,7 @@ byobu keybindings can be user defined in /usr/share/byobu/keybindings/ (or withi
 
 \fBCtrl-a k\fP \- Kill the current window
 
-\fBCtrl-a ~\fP \- Write the current window's scrollback buffer to \fI/var/run/screen/S-$USER/byobu-exchange\fP
+\fBCtrl-a ~\fP \- Save the current window's scrollback buffer
 
 .SH "BUGS"