all Docker envs: add support for connection to host device

CHANGELOG.md

@@ -3,6 +3,7 @@ All notable changes to this project will be documented in this file.
 This project uses the changelog in accordance with [keepchangelog](http://keepachangelog.com/). Please use this to write notable changes, which is not the same as git commit log...
 
 ## [unreleased][unreleased]
+- Added support for connection to host device in all Docker envs (@doegox)
 - Changed `hf 15 info` to show all type matches and check ST25TVxC signature (@doegox)
 - Added initial support for ST25TN and its signature verification (@doegox)
 - Changed originality checks handling to refactor code and pk data (@doegox)

docker/archlinux/Dockerfile

@@ -15,6 +15,10 @@ RUN pacman -S --noconfirm ocl-icd
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/archlinux/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-arch:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/archlinux/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-arch:1.0

docker/archlinux/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-arch:1.0)
+. docker_conf
-docker image rm pm3-arch:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/archlinux/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-arch:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/debian-11-bullseye/Dockerfile

@@ -20,6 +20,10 @@ RUN apt-get install -y opencl-dev && \
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/debian-11-bullseye/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-debian-bullseye:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/debian-11-bullseye/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-debian-bullseye:1.0

docker/debian-11-bullseye/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-debian-bullseye:1.0)
+. docker_conf
-docker image rm pm3-debian-bullseye:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/debian-11-bullseye/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-debian-bullseye:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/debian-12-bookworm/Dockerfile

@@ -18,6 +18,10 @@ RUN apt-get install -y opencl-dev && \
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/debian-12-bookworm/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-debian-bookworm:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/debian-12-bookworm/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-debian-bookworm:1.0

docker/debian-12-bookworm/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-debian-bookworm:1.0)
+. docker_conf
-docker image rm pm3-debian-bookworm:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/debian-12-bookworm/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-debian-bookworm:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/debian-13-trixie/Dockerfile

@@ -18,6 +18,10 @@ RUN apt-get install -y opencl-dev && \
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/debian-13-trixie/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-debian-trixie:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/debian-13-trixie/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-debian-trixie:1.0

docker/debian-13-trixie/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-debian-trixie:1.0)
+. docker_conf
-docker image rm pm3-debian-trixie:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/debian-13-trixie/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-debian-trixie:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/fedora-36/Dockerfile

@@ -13,6 +13,10 @@ RUN yum -y install mesa-libOpenCL ocl-icd-devel
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/fedora-36/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-fedora-36:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/fedora-36/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-fedora-36:1.0

docker/fedora-36/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-fedora-36:1.0)
+. docker_conf
-docker image rm pm3-fedora-36:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/fedora-36/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-fedora-36:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/fedora-37/Dockerfile

@@ -13,6 +13,10 @@ RUN yum -y install mesa-libOpenCL ocl-icd-devel
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/fedora-37/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-fedora-37:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/fedora-37/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-fedora-37:1.0

docker/fedora-37/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-fedora-37:1.0)
+. docker_conf
-docker image rm pm3-fedora-37:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/fedora-37/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-fedora-37:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/homebrew/Dockerfile

@@ -2,6 +2,11 @@ FROM homebrew/brew
 
 ENV LANG=C
 
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN sudo groupadd -g ${UART_GID} mydialout || true
+RUN sudo usermod -aG ${UART_GID} linuxbrew
+
 USER linuxbrew
 WORKDIR "/home/linuxbrew"
 RUN brew install cmake pkg-config bzip2 lz4 && rm -rf ~/.cache/Homebrew

docker/homebrew/README.md

@@ -8,9 +8,10 @@ So only host bins can be built (except tools/hitag2crack/crack5opencl which need
 
 ```sh
 make -j client USE_BREW=1 SKIPREADLINE=1
-make -j mfkey
+make -j cryptorf
-make -j nonce2key
+make -j mfc_card_only
-make -j mf_nonce_brute
+make -j mfc_card_reader
+make -j mfd_aes_brute
 make -j hitag2crack SKIPOPENCL=1
 make -j fpga_compress
 ```

docker/homebrew/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-brew:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/homebrew/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-brew:1.0

docker/homebrew/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-brew:1.0)
+. docker_conf
-docker image rm pm3-brew:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/homebrew/docker_run.sh

@@ -1,4 +1,11 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/linuxbrew/proxmark3 -w /home/linuxbrew/proxmark3 -it pm3-brew:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"
 # if needed, run brew as user linuxbrew

docker/kali/Dockerfile

@@ -9,10 +9,8 @@ RUN apt-get update && \
     apt-get install -y --no-install-recommends git ca-certificates build-essential cmake pkg-config libreadline-dev gcc-arm-none-eabi libnewlib-dev libbz2-dev liblz4-dev libbluetooth-dev libpython3-dev libssl-dev libgd-dev sudo && \
     apt-get clean
 
-RUN apt-get install -y python3-minimal && \
+RUN apt-get install -y --no-install-recommends python3-minimal python3-pip python3-venv && \
-    apt-get install -y python3-pip && \
+    apt-get clean
-    apt-get clean && \
-    python3 -m pip install ansicolors sslcrypto
 
 RUN apt-get install -y opencl-dev && \
     apt-get clean
@@ -20,6 +18,10 @@ RUN apt-get install -y opencl-dev && \
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/kali/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-kali:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/kali/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-kali:1.0

docker/kali/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-kali:1.0)
+. docker_conf
-docker image rm pm3-kali:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/kali/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3  -w /home/rrg/proxmark3 -it pm3-kali:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/kali/run_tests.sh

@@ -5,4 +5,9 @@
 # docker/kali/run_tests.sh;
 
 sudo apt update && sudo apt upgrade -y
+python3 -m venv /tmp/venv
+source /tmp/venv/bin/activate
+python3 -m pip install --use-pep517 pyaes
+python3 -m pip install ansicolors sslcrypto
 tools/release_tests.sh
+deactivate

docker/opensuse-leap/Dockerfile

@@ -16,6 +16,10 @@ RUN zypper --non-interactive install ocl-icd-devel
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) NOPASSWD: ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/opensuse-leap/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-suse-leap:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/opensuse-leap/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-suse-leap:1.0

docker/opensuse-leap/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-suse-leap:1.0)
+. docker_conf
-docker image rm pm3-suse-leap:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/opensuse-leap/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-suse-leap:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/opensuse-tumbleweed/Dockerfile

@@ -15,6 +15,10 @@ RUN zypper --non-interactive install ocl-icd-devel
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) NOPASSWD: ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/opensuse-tumbleweed/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-suse-tumbleweed:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/opensuse-tumbleweed/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-suse-tumbleweed:1.0

docker/opensuse-tumbleweed/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-suse-tumbleweed:1.0)
+. docker_conf
-docker image rm pm3-suse-tumbleweed:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/opensuse-tumbleweed/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-suse-tumbleweed:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/parrot-core-latest/Dockerfile

@@ -18,6 +18,10 @@ RUN apt-get install -y opencl-dev && \
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/parrot-core-latest/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-parrotsec-core-latest:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/parrot-core-latest/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-parrotsec-core-latest:1.0

docker/parrot-core-latest/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-parrotsec-core-latest:1.0)
+. docker_conf
-docker image rm pm3-parrotsec-core-latest:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/parrot-core-latest/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-parrotsec-core-latest:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/ubuntu-18.04/Dockerfile

@@ -21,6 +21,10 @@ RUN apt-get install -y opencl-dev && \
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/ubuntu-18.04/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-ubuntu-18.04:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/ubuntu-18.04/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-ubuntu-18.04:1.0

docker/ubuntu-18.04/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-ubuntu-18.04:1.0)
+. docker_conf
-docker image rm pm3-ubuntu-18.04:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/ubuntu-18.04/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-ubuntu-18.04:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/ubuntu-20.04/Dockerfile

@@ -20,6 +20,10 @@ RUN apt-get install -y opencl-dev && \
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/ubuntu-20.04/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-ubuntu-20.04:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/ubuntu-20.04/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-ubuntu-20.04:1.0

docker/ubuntu-20.04/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-ubuntu-20.04:1.0)
+. docker_conf
-docker image rm pm3-ubuntu-20.04:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/ubuntu-20.04/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-ubuntu-20.04:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"

docker/ubuntu-22.04/Dockerfile

@@ -20,6 +20,10 @@ RUN apt-get install -y opencl-dev && \
 # Create rrg user
 RUN useradd -ms /bin/bash rrg
 RUN passwd -d rrg
+ARG UART_GID
+# dialout group may already exist on another numeric ID than on host
+RUN groupadd -g ${UART_GID} mydialout || true
+RUN usermod -aG ${UART_GID} rrg
 RUN printf 'rrg ALL=(ALL) ALL\n' | tee -a /etc/sudoers
 
 USER rrg

docker/ubuntu-22.04/docker_build.sh

@@ -1,3 +1,6 @@
 #!/bin/bash
 
-docker build -t "pm3-ubuntu-22.04:1.0" .
+. docker_conf
+UART_PORT="$(../../pm3 --list|head -n1|cut -d' ' -f2)"
+UART_GID="$(stat -c '%g' $UART_PORT)"
+docker build --build-arg UART_GID="$UART_GID" -t "$DOCKER_IMAGE" .

docker/ubuntu-22.04/docker_conf

@@ -0,0 +1,2 @@
+# sourceme
+DOCKER_IMAGE=pm3-ubuntu-22.04:1.0

docker/ubuntu-22.04/docker_rm.sh

@@ -1,4 +1,5 @@
 #!/bin/bash
 
-docker rm $(docker ps -aq --filter ancestor=pm3-ubuntu-22.04:1.0)
+. docker_conf
-docker image rm pm3-ubuntu-22.04:1.0
+docker rm $(docker ps -aq --filter ancestor="$DOCKER_IMAGE")
+docker image rm "$DOCKER_IMAGE"

docker/ubuntu-22.04/docker_run.sh

@@ -1,3 +1,10 @@
 #!/bin/bash
 
-docker run --volume=$(pwd)/../..:/home/rrg/proxmark3 -w /home/rrg/proxmark3 -it pm3-ubuntu-22.04:1.0
+. docker_conf
+UART_PORT="$(../../pm3 --list|grep dev|head -n1|cut -d' ' -f2)"
+if [ -n "$UART_PORT" ]; then
+    DEV="--device=/dev/tty0 --device=$UART_PORT"
+else
+    DEV=""
+fi
+docker run $DEV --volume="$(pwd)/../..:/home/rrg/proxmark3" -w /home/rrg/proxmark3 -it "$DOCKER_IMAGE"