Add fpga-xc3s100e and icopyx support

fpga-xc3s100e/define.v

@@ -0,0 +1,49 @@
+// Defining commands, modes and options. This must be aligned to the definitions in fpgaloader.h
+// Note: the definitions here are without shifts
+
+// Commands:
+`define FPGA_CMD_SET_CONFREG                        1
+`define FPGA_CMD_TRACE_ENABLE                       2
+
+// Major modes:
+`define FPGA_MAJOR_MODE_HF_READER                   0
+`define FPGA_MAJOR_MODE_HF_SIMULATOR                1
+`define FPGA_MAJOR_MODE_HF_ISO14443A                2
+`define FPGA_MAJOR_MODE_HF_SNIFF                    3
+`define FPGA_MAJOR_MODE_HF_ISO18092                 4
+`define FPGA_MAJOR_MODE_HF_GET_TRACE                5
+`define FPGA_MAJOR_MODE_OFF                         7
+
+// Options for the generic HF reader
+`define FPGA_HF_READER_MODE_RECEIVE_IQ              0
+`define FPGA_HF_READER_MODE_RECEIVE_AMPLITUDE       1
+`define FPGA_HF_READER_MODE_RECEIVE_PHASE           2
+`define FPGA_HF_READER_MODE_SEND_FULL_MOD           3
+`define FPGA_HF_READER_MODE_SEND_SHALLOW_MOD        4
+`define FPGA_HF_READER_MODE_SNIFF_IQ                5
+`define FPGA_HF_READER_MODE_SNIFF_AMPLITUDE         6
+`define FPGA_HF_READER_MODE_SNIFF_PHASE             7
+`define FPGA_HF_READER_MODE_SEND_JAM                8
+
+`define FPGA_HF_READER_SUBCARRIER_848_KHZ           0
+`define FPGA_HF_READER_SUBCARRIER_424_KHZ           1
+`define FPGA_HF_READER_SUBCARRIER_212_KHZ           2
+
+// Options for the HF simulated tag, how to modulate
+`define FPGA_HF_SIMULATOR_NO_MODULATION             0
+`define FPGA_HF_SIMULATOR_MODULATE_BPSK             1
+`define FPGA_HF_SIMULATOR_MODULATE_212K             2
+`define FPGA_HF_SIMULATOR_MODULATE_424K             4
+`define FPGA_HF_SIMULATOR_MODULATE_424K_8BIT        5
+
+// Options for ISO14443A
+`define FPGA_HF_ISO14443A_SNIFFER                   0
+`define FPGA_HF_ISO14443A_TAGSIM_LISTEN             1
+`define FPGA_HF_ISO14443A_TAGSIM_MOD                2
+`define FPGA_HF_ISO14443A_READER_LISTEN             3
+`define FPGA_HF_ISO14443A_READER_MOD                4
+
+//options for ISO18092 / Felica
+`define FPGA_HF_ISO18092_FLAG_NOMOD                 1 // 0001 disable modulation module
+`define FPGA_HF_ISO18092_FLAG_424K                  2 // 0010 should enable 414k mode (untested). No autodetect
+`define FPGA_HF_ISO18092_FLAG_READER                4 // 0100 enables antenna power, to act as a reader instead of tag