typos

armsrc/BigBuf.c

@@ -206,7 +206,7 @@ uint32_t BigBuf_get_traceLen(void) {
 /**
   This is a function to store traces. All protocols can use this generic tracer-function.
   The traces produced by calling this function can be fetched on the client-side
-  by 'hf list raw', alternatively 'hf list <proto>' for protocol-specific
+  by 'hf list -t raw', alternatively 'hf list -t <proto>' for protocol-specific
   annotation of commands/responses.
 **/
 bool RAMFUNC LogTrace(const uint8_t *btBytes, uint16_t iLen, uint32_t timestamp_start, uint32_t timestamp_end, uint8_t *parity, bool readerToTag) {

client/lualibs/read15.lua

@@ -72,7 +72,7 @@ local function read15693(slow, dont_readresponse)
     We start by trying this command:
     MANDATORY (present in ALL iso15693 tags) command (the example below is sent to a tag different from the above one):
 
-        pm3> hf 15 info u
+        pm3> hf 15 info --ua
         UID=E007C1A257394244
         Tag Info: Texas Instrument; Tag-it HF-I Standard; 8x32bit
         pm3>

doc/new_frame_format.md

@@ -288,10 +288,10 @@ USART_BAUD_RATE defined there
 Receiving from USART need more than 30ms as we used on USB
 else we get errors about partial packet reception
 
-    FTDI   9600 hw status        ⇒ we need 20ms
-    FTDI 115200 hw status        ⇒ we need 50ms
-    FTDI 460800 hw status        ⇒ we need 30ms
-    BT   115200 hf mf fchk 1 dic ⇒ we need 140ms
+    FTDI   9600 hw status                   ⇒ we need 20ms
+    FTDI 115200 hw status                   ⇒ we need 50ms
+    FTDI 460800 hw status                   ⇒ we need 30ms
+    BT   115200 hf mf fchk --1k -f file.dic ⇒ we need 140ms
 
     # define UART_FPC_CLIENT_RX_TIMEOUT_MS  170
     # define UART_USB_CLIENT_RX_TIMEOUT_MS  20
@@ -307,7 +307,7 @@ it's reduced to UART_USB_CLIENT_RX_TIMEOUT_MS.
 
 Add automatically some communication delay in the `WaitForResponseTimeout` & `dl_it` timeouts.  
 Only when using FPC, timeout = 2* empirically measured delay (FTDI cable).  
-Empirically measured delay (FTDI cable) with "hw ping 512" :
+Empirically measured delay (FTDI cable) with "hw ping -l 512" :
 
        usb ⇒    6..  32ms
     460800 ⇒   40..  70ms
@@ -453,7 +453,7 @@ On linux UART (FTDI)
     CMD_PING reply_ng(CMD_PING, PM3_SUCCESS, packet->data.asBytes, packet->length);
     <-12=504d33620080000009016233                                           <- NG
 
-`hw ping 512` (NG)
+`hw ping -l 512` (NG)
 
     CmdPing  SendCommandNG(CMD_PING, data, len);
     ->522=504d336100820901000102030405060708090a0b0c0d0e0f1011121314151617  -> NG

include/pm3_cmd.h

@@ -860,10 +860,10 @@ typedef struct {
 
 // Receiving from USART need more than 30ms as we used on USB
 // else we get errors about partial packet reception
-// FTDI   9600 hw status        -> we need 20ms
-// FTDI 115200 hw status        -> we need 50ms
-// FTDI 460800 hw status        -> we need 30ms
-// BT   115200 hf mf fchk 1 dic -> we need 140ms
+// FTDI   9600 hw status                    -> we need 20ms
+// FTDI 115200 hw status                    -> we need 50ms
+// FTDI 460800 hw status                    -> we need 30ms
+// BT   115200  hf mf fchk --1k -f file.dic -> we need 140ms
 // all zero's configure: no timeout for read/write used.
 // took settings from libnfc/buses/uart.c