mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2025-08-21 13:53:55 -07:00
summer restructuring:
* .h include only the strict minimum for their own parsing * this forces all files to include explicitment their needs and not count on far streched dependencies * this helps Makefile to rebuild only the minimum * according to this rule, most standalone .h are now gone * big app.h is gone * remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway * all unrequired include were removed * split common/ into common/ (client+arm) and common_arm/ (os+bootloader) * bring zlib to common/ * bring stuff not really/not yet used in common back to armsrc/ or client/ * bring liblua into client/ * bring uart into client/ * move some portions of code around (dbprint, protocols,...) * rename unused files into *_disabled.[ch] to make it explicit * rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash * remove PrintAndLogDevice * move deprecated-hid-flasher from client to tools * Makefiles * treat deps in armsrc/ as in client/ * client: stop on warning (-Werror), same as for armsrc/ Tested on: * all standalone modes * Linux
This commit is contained in:
Philippe Teuwen
parent
b7d412d27b
commit
d19754567d
447 changed files with 2553 additions and 2599 deletions
11
include/ansi.h
Normal file
11
include/ansi.h
Normal file
|
|
@ -0,0 +1,11 @@
|
|||
#ifndef __ANSI_H
|
||||
#define __ANSI_H
|
||||
|
||||
#define _BLUE_(s) "\x1b[34m" s "\x1b[0m "
|
||||
#define _RED_(s) "\x1b[31m" s "\x1b[0m "
|
||||
#define _GREEN_(s) "\x1b[32m" s "\x1b[0m "
|
||||
#define _YELLOW_(s) "\x1b[33m" s "\x1b[0m "
|
||||
#define _MAGENTA_(s) "\x1b[35m" s "\x1b[0m "
|
||||
#define _CYAN_(s) "\x1b[36m" s "\x1b[0m "
|
||||
|
||||
#endif
|
||||
|
|
@ -12,26 +12,11 @@
|
|||
#ifndef __COMMON_H
|
||||
#define __COMMON_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stddef.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
|
||||
typedef unsigned char byte_t;
|
||||
|
||||
#ifdef _MSC_VER
|
||||
typedef DWORD uint32_t;
|
||||
typedef BYTE uint8_t;
|
||||
#define PACKED
|
||||
// stuff
|
||||
#else
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#define PACKED __attribute__((packed))
|
||||
#endif
|
||||
|
||||
// debug
|
||||
#define DBG_NONE 0 // no messages
|
||||
|
|
@ -138,7 +123,4 @@ extern int DBGLEVEL;
|
|||
# define DEC2BCD(dec) HornerScheme(dec, 10, 0x10)
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -1,18 +0,0 @@
|
|||
//-----------------------------------------------------------------------------
|
||||
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
|
||||
// at your option, any later version. See the LICENSE.txt file for the text of
|
||||
// the license.
|
||||
//-----------------------------------------------------------------------------
|
||||
// LEFIC's obfuscation function
|
||||
//-----------------------------------------------------------------------------
|
||||
|
||||
#ifndef __LEGIC_PRNG_H
|
||||
#define __LEGIC_PRNG_H
|
||||
|
||||
#include <stdint.h>
|
||||
void legic_prng_init(uint8_t iv);
|
||||
void legic_prng_forward(int count);
|
||||
uint8_t legic_prng_get_bit(void);
|
||||
uint32_t legic_prng_get_bits(uint8_t len);
|
||||
#endif
|
||||
|
||||
|
|
@ -12,14 +12,6 @@
|
|||
#ifndef __PMFLASH_H
|
||||
#define __PMFLASH_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include <stddef.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
|
||||
#include "common.h"
|
||||
|
||||
// Flashmem spi baudrate
|
||||
|
|
@ -90,8 +82,4 @@ typedef struct {
|
|||
uint8_t signature[FLASH_MEM_SIGNATURE_LEN];
|
||||
} PACKED rdv40_validation_t;
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // __PMFLASH_H
|
||||
|
|
|
|||
546
include/protocols.h
Normal file
546
include/protocols.h
Normal file
|
|
@ -0,0 +1,546 @@
|
|||
#ifndef PROTOCOLS_H
|
||||
#define PROTOCOLS_H
|
||||
|
||||
#include "common.h"
|
||||
|
||||
//The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501
|
||||
/*
|
||||
ISO14443A (usually NFC tags)
|
||||
26 (7bits) = REQA
|
||||
30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes)
|
||||
A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK])
|
||||
52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA)
|
||||
93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor)
|
||||
93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK)
|
||||
95 20 = Anticollision of cascade level2
|
||||
95 70 = Select of cascade level2
|
||||
50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card)
|
||||
Mifare
|
||||
60 = Authenticate with KeyA
|
||||
61 = Authenticate with KeyB
|
||||
40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A)
|
||||
C0 = Decrement
|
||||
C1 = Increment
|
||||
C2 = Restore
|
||||
B0 = Transfer
|
||||
Ultralight C
|
||||
A0 = Compatibility Write (to accomodate MIFARE commands)
|
||||
1A = Step1 Authenticate
|
||||
AF = Step2 Authenticate
|
||||
|
||||
|
||||
ISO14443B
|
||||
05 = REQB
|
||||
1D = ATTRIB
|
||||
50 = HALT
|
||||
|
||||
BA = PING (reader -> tag)
|
||||
AB = PONG (tag -> reader)
|
||||
SRIX4K (tag does not respond to 05)
|
||||
06 00 = INITIATE
|
||||
0E xx = SELECT ID (xx = Chip-ID)
|
||||
0B = Get UID
|
||||
08 yy = Read Block (yy = block number)
|
||||
09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
|
||||
0C = Reset to Inventory
|
||||
0F = Completion
|
||||
0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
|
||||
|
||||
|
||||
ISO15693
|
||||
MANDATORY COMMANDS (all ISO15693 tags must support those)
|
||||
01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes)
|
||||
02 = Stay Quiet
|
||||
OPTIONAL COMMANDS (not all tags support them)
|
||||
20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes)
|
||||
21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes)
|
||||
22 = Lock Block
|
||||
23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC)
|
||||
25 = Select
|
||||
26 = Reset to Ready
|
||||
27 = Write AFI
|
||||
28 = Lock AFI
|
||||
29 = Write DSFID
|
||||
2A = Lock DSFID
|
||||
2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes)
|
||||
2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC)
|
||||
|
||||
EM Microelectronic CUSTOM COMMANDS
|
||||
A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type)
|
||||
A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value)
|
||||
B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info)
|
||||
E4 = Login (followed by 1byte IC Manufacturer code+4bytes password)
|
||||
NXP/Philips CUSTOM COMMANDS
|
||||
A0 = Inventory Read
|
||||
A1 = Fast Inventory Read
|
||||
A2 = Set EAS
|
||||
A3 = Reset EAS
|
||||
A4 = Lock EAS
|
||||
A5 = EAS Alarm
|
||||
A6 = Password Protect EAS
|
||||
A7 = Write EAS ID
|
||||
A8 = Read EPC
|
||||
B0 = Inventory Page Read
|
||||
B1 = Fast Inventory Page Read
|
||||
B2 = Get Random Number
|
||||
B3 = Set Password
|
||||
B4 = Write Password
|
||||
B5 = Lock Password
|
||||
B6 = Bit Password Protection
|
||||
B7 = Lock Page Protection Condition
|
||||
B8 = Get Multiple Block Protection Status
|
||||
B9 = Destroy SLI
|
||||
BA = Enable Privacy
|
||||
BB = 64bit Password Protection
|
||||
40 = Long Range CMD (Standard ISO/TR7003:1990)
|
||||
|
||||
ISO 7816-4 Basic interindustry commands. For command APDU's.
|
||||
B0 = READ BINARY
|
||||
D0 = WRITE BINARY
|
||||
D6 = UPDATE BINARY
|
||||
0E = ERASE BINARY
|
||||
B2 = READ RECORDS
|
||||
D2 = WRITE RECORDS
|
||||
E2 = APPEND RECORD
|
||||
DC = UPDATE RECORD
|
||||
CA = GET DATA
|
||||
DA = PUT DATA
|
||||
A4 = SELECT FILE
|
||||
20 = VERIFY
|
||||
88 = INTERNAL AUTHENTICATION
|
||||
82 = EXTERNAL AUTHENTICATION
|
||||
B4 = GET CHALLENGE
|
||||
70 = MANAGE CHANNEL
|
||||
|
||||
For response APDU's
|
||||
90 00 = OK
|
||||
6x xx = ERROR
|
||||
*/
|
||||
// these cmds are adjusted to ISO15693 and Manchester encoding requests.
|
||||
// for instance ICLASS_CMD_SELECT 0x81 tells if ISO14443b/BPSK coding/106 kbits/s
|
||||
// for instance ICLASS_CMD_SELECT 0x41 tells if ISO14443b/BPSK coding/423 kbits/s
|
||||
//
|
||||
#define ICLASS_CMD_HALT 0x00
|
||||
#define ICLASS_CMD_SELECT_15 0x01
|
||||
#define ICLASS_CMD_ACTALL 0x0A
|
||||
#define ICLASS_CMD_DETECT 0x0F
|
||||
|
||||
#define ICLASS_CMD_CHECK 0x05
|
||||
#define ICLASS_CMD_READ4 0x06
|
||||
#define ICLASS_CMD_READ_OR_IDENTIFY 0x0C
|
||||
|
||||
#define ICLASS_CMD_SELECT 0x81
|
||||
#define ICLASS_CMD_PAGESEL 0x84
|
||||
#define ICLASS_CMD_UPDATE 0x87
|
||||
#define ICLASS_CMD_READCHECK_KC 0x18
|
||||
#define ICLASS_CMD_READCHECK_KD 0x88
|
||||
#define ICLASS_CMD_ACT 0x8E
|
||||
|
||||
|
||||
|
||||
#define ISO14443A_CMD_REQA 0x26
|
||||
#define ISO14443A_CMD_READBLOCK 0x30
|
||||
#define ISO14443A_CMD_WUPA 0x52
|
||||
#define ISO14443A_CMD_OPTS 0x35
|
||||
#define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93
|
||||
#define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95
|
||||
#define ISO14443A_CMD_ANTICOLL_OR_SELECT_3 0x97
|
||||
#define ISO14443A_CMD_WRITEBLOCK 0xA0
|
||||
#define ISO14443A_CMD_HALT 0x50
|
||||
#define ISO14443A_CMD_RATS 0xE0
|
||||
#define ISO14443A_CMD_NXP_DESELECT 0xC2
|
||||
|
||||
#define MIFARE_SELECT_CT 0x88
|
||||
#define MIFARE_AUTH_KEYA 0x60
|
||||
#define MIFARE_AUTH_KEYB 0x61
|
||||
#define MIFARE_MAGICWUPC1 0x40
|
||||
#define MIFARE_MAGICWUPC2 0x43
|
||||
#define MIFARE_MAGICWIPEC 0x41
|
||||
#define MIFARE_CMD_INC 0xC0
|
||||
#define MIFARE_CMD_DEC 0xC1
|
||||
#define MIFARE_CMD_RESTORE 0xC2
|
||||
#define MIFARE_CMD_TRANSFER 0xB0
|
||||
|
||||
#define MIFARE_EV1_PERSONAL_UID 0x40
|
||||
#define MIFARE_EV1_SETMODE 0x43
|
||||
|
||||
#define MIFARE_ULC_WRITE 0xA2
|
||||
#define MIFARE_ULC_COMP_WRITE 0xA0
|
||||
#define MIFARE_ULC_AUTH_1 0x1A
|
||||
#define MIFARE_ULC_AUTH_2 0xAF
|
||||
|
||||
#define MIFARE_ULEV1_AUTH 0x1B
|
||||
#define MIFARE_ULEV1_VERSION 0x60
|
||||
#define MIFARE_ULEV1_FASTREAD 0x3A
|
||||
#define MIFARE_ULEV1_READ_CNT 0x39
|
||||
#define MIFARE_ULEV1_INCR_CNT 0xA5
|
||||
#define MIFARE_ULEV1_READSIG 0x3C
|
||||
#define MIFARE_ULEV1_CHECKTEAR 0x3E
|
||||
#define MIFARE_ULEV1_VCSL 0x4B
|
||||
|
||||
// New Mifare UL Nano commands. Ref:: (https://www.nxp.com/docs/en/data-sheet/MF0UN_H_00.pdf)
|
||||
#define MIFARE_ULNANO_WRITESIG 0xA9
|
||||
#define MIFARE_ULNANO_LOCKSIF 0xAC
|
||||
|
||||
// mifare 4bit card answers
|
||||
#define CARD_ACK 0x0A // 1010 - ACK
|
||||
#define CARD_NACK_IV 0x00 // 0000 - NACK, invalid argument (invalid page address)
|
||||
#define CARD_NACK_PA 0x01 // 0001 - NACK, parity / crc error
|
||||
#define CARD_NACK_NA 0x04 // 0100 - NACK, not allowed (command not allowed)
|
||||
#define CARD_NACK_TR 0x05 // 0101 - NACK, transmission error
|
||||
#define CARD_NACK_EE 0x07 // 0111 - NACK, EEPROM write error
|
||||
|
||||
// Magic Generation 1, parameter "work flags"
|
||||
// bit 0 - need get UID
|
||||
// bit 1 - send wupC (wakeup chinese)
|
||||
// bit 2 - send HALT cmd after sequence
|
||||
// bit 3 - turn on FPGA
|
||||
// bit 4 - turn off FPGA
|
||||
// bit 5 - set datain instead of issuing USB reply (called via ARM for StandAloneMode14a)
|
||||
#define MAGIC_UID 0x01
|
||||
#define MAGIC_WUPC 0x02
|
||||
#define MAGIC_HALT 0x04
|
||||
#define MAGIC_INIT 0x08
|
||||
#define MAGIC_OFF 0x10
|
||||
#define MAGIC_DATAIN 0x20
|
||||
#define MAGIC_WIPE 0x40
|
||||
#define MAGIC_SINGLE (MAGIC_WUPC | MAGIC_HALT | MAGIC_INIT | MAGIC_OFF) //0x1E
|
||||
|
||||
/**
|
||||
06 00 = INITIATE
|
||||
0E xx = SELECT ID (xx = Chip-ID)
|
||||
0B = Get UID
|
||||
08 yy = Read Block (yy = block number)
|
||||
09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written)
|
||||
0C = Reset to Inventory
|
||||
0F = Completion
|
||||
0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate)
|
||||
**/
|
||||
|
||||
#define ISO14443B_REQB 0x05
|
||||
#define ISO14443B_ATTRIB 0x1D
|
||||
#define ISO14443B_HALT 0x50
|
||||
#define ISO14443B_INITIATE 0x06
|
||||
#define ISO14443B_SELECT 0x0E
|
||||
#define ISO14443B_GET_UID 0x0B
|
||||
#define ISO14443B_READ_BLK 0x08
|
||||
#define ISO14443B_WRITE_BLK 0x09
|
||||
#define ISO14443B_RESET 0x0C
|
||||
#define ISO14443B_COMPLETION 0x0F
|
||||
#define ISO14443B_AUTHENTICATE 0x0A
|
||||
#define ISO14443B_PING 0xBA
|
||||
#define ISO14443B_PONG 0xAB
|
||||
|
||||
//First byte is 26
|
||||
#define ISO15693_INVENTORY 0x01
|
||||
#define ISO15693_STAYQUIET 0x02
|
||||
//First byte is 02
|
||||
#define ISO15693_READBLOCK 0x20
|
||||
#define ISO15693_WRITEBLOCK 0x21
|
||||
#define ISO15693_LOCKBLOCK 0x22
|
||||
#define ISO15693_READ_MULTI_BLOCK 0x23
|
||||
#define ISO15693_SELECT 0x25
|
||||
#define ISO15693_RESET_TO_READY 0x26
|
||||
#define ISO15693_WRITE_AFI 0x27
|
||||
#define ISO15693_LOCK_AFI 0x28
|
||||
#define ISO15693_WRITE_DSFID 0x29
|
||||
#define ISO15693_LOCK_DSFID 0x2A
|
||||
#define ISO15693_GET_SYSTEM_INFO 0x2B
|
||||
#define ISO15693_READ_MULTI_SECSTATUS 0x2C
|
||||
|
||||
|
||||
// Topaz command set:
|
||||
#define TOPAZ_REQA 0x26 // Request
|
||||
#define TOPAZ_WUPA 0x52 // WakeUp
|
||||
#define TOPAZ_RID 0x78 // Read ID
|
||||
#define TOPAZ_RALL 0x00 // Read All (all bytes)
|
||||
#define TOPAZ_READ 0x01 // Read (a single byte)
|
||||
#define TOPAZ_WRITE_E 0x53 // Write-with-erase (a single byte)
|
||||
#define TOPAZ_WRITE_NE 0x1a // Write-no-erase (a single byte)
|
||||
// additional commands for Dynamic Memory Model
|
||||
#define TOPAZ_RSEG 0x10 // Read segment
|
||||
#define TOPAZ_READ8 0x02 // Read (eight bytes)
|
||||
#define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes)
|
||||
#define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes)
|
||||
|
||||
|
||||
// Definitions of which protocol annotations there are available
|
||||
#define ISO_14443A 0
|
||||
#define ICLASS 1
|
||||
#define ISO_14443B 2
|
||||
#define TOPAZ 3
|
||||
#define ISO_7816_4 4
|
||||
#define MFDES 5
|
||||
#define LEGIC 6
|
||||
#define ISO_15693 7
|
||||
#define FELICA 8
|
||||
#define PROTO_MIFARE 9
|
||||
#define PROTO_HITAG 10
|
||||
#define THINFILM 11
|
||||
|
||||
//-- Picopass fuses
|
||||
#define FUSE_FPERS 0x80
|
||||
#define FUSE_CODING1 0x40
|
||||
#define FUSE_CODING0 0x20
|
||||
#define FUSE_CRYPT1 0x10
|
||||
#define FUSE_CRYPT0 0x08
|
||||
#define FUSE_FPROD1 0x04
|
||||
#define FUSE_FPROD0 0x02
|
||||
#define FUSE_RA 0x01
|
||||
|
||||
// ISO 7816-4 Basic interindustry commands. For command APDU's.
|
||||
#define ISO7816_READ_BINARY 0xB0
|
||||
#define ISO7816_WRITE_BINARY 0xD0
|
||||
#define ISO7816_UPDATE_BINARY 0xD6
|
||||
#define ISO7816_ERASE_BINARY 0x0E
|
||||
#define ISO7816_READ_RECORDS 0xB2
|
||||
#define ISO7816_WRITE_RECORDS 0xD2
|
||||
#define ISO7816_APPEND_RECORD 0xE2
|
||||
#define ISO7816_UPDATE_RECORD 0xDC
|
||||
#define ISO7816_GET_DATA 0xCA
|
||||
#define ISO7816_PUT_DATA 0xDA
|
||||
#define ISO7816_SELECT_FILE 0xA4
|
||||
#define ISO7816_VERIFY 0x20
|
||||
#define ISO7816_INTERNAL_AUTHENTICATION 0x88
|
||||
#define ISO7816_EXTERNAL_AUTHENTICATION 0x82
|
||||
#define ISO7816_GET_CHALLENGE 0x84
|
||||
#define ISO7816_MANAGE_CHANNEL 0x70
|
||||
|
||||
#define ISO7816_GET_RESPONSE 0xC0
|
||||
// ISO7816-4 For response APDU's
|
||||
#define ISO7816_OK 0x9000
|
||||
// 6x xx = ERROR
|
||||
|
||||
// MIFARE DESFire command set:
|
||||
#define MFDES_CREATE_APPLICATION 0xca
|
||||
#define MFDES_DELETE_APPLICATION 0xda
|
||||
#define MFDES_GET_APPLICATION_IDS 0x6a
|
||||
#define MFDES_SELECT_APPLICATION 0x5a
|
||||
#define MFDES_FORMAT_PICC 0xfc
|
||||
#define MFDES_GET_VERSION 0x60
|
||||
#define MFDES_READ_DATA 0xbd
|
||||
#define MFDES_WRITE_DATA 0x3d
|
||||
#define MFDES_GET_VALUE 0x6c
|
||||
#define MFDES_CREDIT 0x0c
|
||||
#define MFDES_DEBIT 0xdc
|
||||
#define MFDES_LIMITED_CREDIT 0x1c
|
||||
#define MFDES_WRITE_RECORD 0x3b
|
||||
#define MFDES_READ_RECORDS 0xbb
|
||||
#define MFDES_CLEAR_RECORD_FILE 0xeb
|
||||
#define MFDES_COMMIT_TRANSACTION 0xc7
|
||||
#define MFDES_ABORT_TRANSACTION 0xa7
|
||||
#define MFDES_GET_FREE_MEMORY 0x6e
|
||||
#define MFDES_GET_FILE_IDS 0x6f
|
||||
#define MFDES_GET_ISOFILE_IDS 0x61
|
||||
#define MFDES_GET_FILE_SETTINGS 0xf5
|
||||
#define MFDES_CHANGE_FILE_SETTINGS 0x5f
|
||||
#define MFDES_CREATE_STD_DATA_FILE 0xcd
|
||||
#define MFDES_CREATE_BACKUP_DATA_FILE 0xcb
|
||||
#define MFDES_CREATE_VALUE_FILE 0xcc
|
||||
#define MFDES_CREATE_LINEAR_RECORD_FILE 0xc1
|
||||
#define MFDES_CREATE_CYCLIC_RECORD_FILE 0xc0
|
||||
#define MFDES_DELETE_FILE 0xdf
|
||||
#define MFDES_AUTHENTICATE 0x0a // AUTHENTICATE_NATIVE
|
||||
#define MFDES_AUTHENTICATE_ISO 0x1a // AUTHENTICATE_STANDARD
|
||||
#define MFDES_AUTHENTICATE_AES 0xaa
|
||||
#define MFDES_CHANGE_KEY_SETTINGS 0x54
|
||||
#define MFDES_GET_KEY_SETTINGS 0x45
|
||||
#define MFDES_CHANGE_KEY 0xc4
|
||||
#define MFDES_GET_KEY_VERSION 0x64
|
||||
#define MFDES_AUTHENTICATION_FRAME 0xAF
|
||||
|
||||
// LEGIC Commands
|
||||
#define LEGIC_MIM_22 0x0D
|
||||
#define LEGIC_MIM_256 0x1D
|
||||
#define LEGIC_MIM_1024 0x3D
|
||||
#define LEGIC_ACK_22 0x19
|
||||
#define LEGIC_ACK_256 0x39
|
||||
#define LEGIC_READ 0x01
|
||||
#define LEGIC_WRITE 0x00
|
||||
|
||||
/* T55x7 configuration register definitions */
|
||||
#define T55x7_POR_DELAY 0x00000001
|
||||
#define T55x7_ST_TERMINATOR 0x00000008
|
||||
#define T55x7_PWD 0x00000010
|
||||
#define T55x7_MAXBLOCK_SHIFT 5
|
||||
#define T55x7_AOR 0x00000200
|
||||
#define T55x7_PSKCF_RF_2 0
|
||||
#define T55x7_PSKCF_RF_4 0x00000400
|
||||
#define T55x7_PSKCF_RF_8 0x00000800
|
||||
#define T55x7_MODULATION_DIRECT 0
|
||||
#define T55x7_MODULATION_PSK1 0x00001000
|
||||
#define T55x7_MODULATION_PSK2 0x00002000
|
||||
#define T55x7_MODULATION_PSK3 0x00003000
|
||||
#define T55x7_MODULATION_FSK1 0x00004000
|
||||
#define T55x7_MODULATION_FSK2 0x00005000
|
||||
#define T55x7_MODULATION_FSK1a 0x00006000
|
||||
#define T55x7_MODULATION_FSK2a 0x00007000
|
||||
#define T55x7_MODULATION_MANCHESTER 0x00008000
|
||||
#define T55x7_MODULATION_BIPHASE 0x00010000
|
||||
#define T55x7_MODULATION_DIPHASE 0x00018000
|
||||
#define T55x7_X_MODE 0x00020000
|
||||
#define T55x7_BITRATE_RF_8 0
|
||||
#define T55x7_BITRATE_RF_16 0x00040000
|
||||
#define T55x7_BITRATE_RF_32 0x00080000
|
||||
#define T55x7_BITRATE_RF_40 0x000C0000
|
||||
#define T55x7_BITRATE_RF_50 0x00100000
|
||||
#define T55x7_BITRATE_RF_64 0x00140000
|
||||
#define T55x7_BITRATE_RF_100 0x00180000
|
||||
#define T55x7_BITRATE_RF_128 0x001C0000
|
||||
#define T55x7_TESTMODE_DISABLED 0x60000000
|
||||
|
||||
/* T5555 (Q5) configuration register definitions */
|
||||
#define T5555_ST_TERMINATOR 0x00000001
|
||||
#define T5555_MAXBLOCK_SHIFT 0x00000001
|
||||
#define T5555_MODULATION_MANCHESTER 0
|
||||
#define T5555_MODULATION_PSK1 0x00000010
|
||||
#define T5555_MODULATION_PSK2 0x00000020
|
||||
#define T5555_MODULATION_PSK3 0x00000030
|
||||
#define T5555_MODULATION_FSK1 0x00000040
|
||||
#define T5555_MODULATION_FSK2 0x00000050
|
||||
#define T5555_MODULATION_BIPHASE 0x00000060
|
||||
#define T5555_MODULATION_DIRECT 0x00000070
|
||||
#define T5555_INVERT_OUTPUT 0x00000080
|
||||
#define T5555_PSK_RF_2 0
|
||||
#define T5555_PSK_RF_4 0x00000100
|
||||
#define T5555_PSK_RF_8 0x00000200
|
||||
#define T5555_USE_PWD 0x00000400
|
||||
#define T5555_USE_AOR 0x00000800
|
||||
#define T5555_SET_BITRATE(x) (((x-2)/2)<<12)
|
||||
#define T5555_GET_BITRATE(x) ((((x >> 12) & 0x3F)*2)+2)
|
||||
#define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2
|
||||
#define T5555_FAST_WRITE 0x00004000
|
||||
#define T5555_PAGE_SELECT 0x00008000
|
||||
|
||||
#define T55XX_WRITE_TIMEOUT 1500
|
||||
|
||||
// em4x05 & em4x69 chip configuration register definitions
|
||||
#define EM4x05_GET_BITRATE(x) (((x & 0x3F)*2)+2)
|
||||
#define EM4x05_SET_BITRATE(x) ((x-2)/2)
|
||||
#define EM4x05_MODULATION_NRZ 0x00000000
|
||||
#define EM4x05_MODULATION_MANCHESTER 0x00000040
|
||||
#define EM4x05_MODULATION_BIPHASE 0x00000080
|
||||
#define EM4x05_MODULATION_MILLER 0x000000C0 //not supported by all 4x05/4x69 chips
|
||||
#define EM4x05_MODULATION_PSK1 0x00000100 //not supported by all 4x05/4x69 chips
|
||||
#define EM4x05_MODULATION_PSK2 0x00000140 //not supported by all 4x05/4x69 chips
|
||||
#define EM4x05_MODULATION_PSK3 0x00000180 //not supported by all 4x05/4x69 chips
|
||||
#define EM4x05_MODULATION_FSK1 0x00000200 //not supported by all 4x05/4x69 chips
|
||||
#define EM4x05_MODULATION_FSK2 0x00000240 //not supported by all 4x05/4x69 chips
|
||||
#define EM4x05_PSK_RF_2 0
|
||||
#define EM4x05_PSK_RF_4 0x00000400
|
||||
#define EM4x05_PSK_RF_8 0x00000800
|
||||
#define EM4x05_MAXBLOCK_SHIFT 14
|
||||
#define EM4x05_FIRST_USER_BLOCK 5
|
||||
#define EM4x05_SET_NUM_BLOCKS(x) ((x+5-1)<<14) //# of blocks sent during default read mode
|
||||
#define EM4x05_GET_NUM_BLOCKS(x) (((x>>14) & 0xF)-5+1)
|
||||
#define EM4x05_READ_LOGIN_REQ 1<<18
|
||||
#define EM4x05_READ_HK_LOGIN_REQ 1<<19
|
||||
#define EM4x05_WRITE_LOGIN_REQ 1<<20
|
||||
#define EM4x05_WRITE_HK_LOGIN_REQ 1<<21
|
||||
#define EM4x05_READ_AFTER_WRITE 1<<22
|
||||
#define EM4x05_DISABLE_ALLOWED 1<<23
|
||||
#define EM4x05_READER_TALK_FIRST 1<<24
|
||||
|
||||
|
||||
// FeliCa protocol
|
||||
#define FELICA_POLL_REQ 0x00
|
||||
#define FELICA_POLL_ACK 0x01
|
||||
|
||||
#define FELICA_REQSRV_REQ 0x02
|
||||
#define FELICA_REQSRV_ACK 0x03
|
||||
|
||||
#define FELICA_REQRESP_REQ 0x04
|
||||
#define FELICA_REQRESP_ACK 0x05
|
||||
|
||||
#define FELICA_RDBLK_REQ 0x06
|
||||
#define FELICA_RDBLK_ACK 0x07
|
||||
|
||||
#define FELICA_WRTBLK_REQ 0x08
|
||||
#define FELICA_WRTBLK_ACK 0x09
|
||||
|
||||
#define FELICA_SRCHSYSCODE_REQ 0x0a
|
||||
#define FELICA_SRCHSYSCODE_ACK 0x0b
|
||||
|
||||
#define FELICA_REQSYSCODE_REQ 0x0c
|
||||
#define FELICA_REQSYSCODE_ACK 0x0d
|
||||
|
||||
#define FELICA_AUTH1_REQ 0x10
|
||||
#define FELICA_AUTH1_ACK 0x11
|
||||
|
||||
#define FELICA_AUTH2_REQ 0x12
|
||||
#define FELICA_AUTH2_ACK 0x13
|
||||
|
||||
#define FELICA_RDSEC_REQ 0x14
|
||||
#define FELICA_RDSEC_ACK 0x15
|
||||
|
||||
#define FELICA_WRTSEC_REQ 0x16
|
||||
#define FELICA_WRTSEC_ACK 0x17
|
||||
|
||||
#define FELICA_REQSRV2_REQ 0x32
|
||||
#define FELICA_REQSRV2_ACK 0x33
|
||||
|
||||
#define FELICA_GETSTATUS_REQ 0x38
|
||||
#define FELICA_GETSTATUS_ACK 0x39
|
||||
|
||||
#define FELICA_OSVER_REQ 0x3c
|
||||
#define FELICA_OSVER_ACK 0x3d
|
||||
|
||||
#define FELICA_RESET_MODE_REQ 0x3e
|
||||
#define FELICA_RESET_MODE_ACK 0x3f
|
||||
|
||||
#define FELICA_AUTH1V2_REQ 0x40
|
||||
#define FELICA_AUTH1V2_ACK 0x41
|
||||
|
||||
#define FELICA_AUTH2V2_REQ 0x42
|
||||
#define FELICA_AUTH2V2_ACK 0x43
|
||||
|
||||
#define FELICA_RDSECV2_REQ 0x44
|
||||
#define FELICA_RDSECV2_ACK 0x45
|
||||
#define FELICA_WRTSECV2_REQ 0x46
|
||||
#define FELICA_WRTSECV2_ACK 0x47
|
||||
|
||||
#define FELICA_UPDATE_RNDID_REQ 0x4C
|
||||
#define FELICA_UPDATE_RNDID_ACK 0x4D
|
||||
|
||||
// FeliCa SYSTEM list
|
||||
#define SYSTEMCODE_ANY 0xffff // ANY
|
||||
#define SYSTEMCODE_FELICA_LITE 0x88b4 // FeliCa Lite
|
||||
#define SYSTEMCODE_COMMON 0xfe00 // Common
|
||||
#define SYSTEMCODE_EDY 0xfe00 // Edy
|
||||
#define SYSTEMCODE_CYBERNE 0x0003 // Cyberne
|
||||
#define SYSTEMCODE_SUICA 0x0003 // Suica
|
||||
#define SYSTEMCODE_PASMO 0x0003 // Pasmo
|
||||
|
||||
//FeliCa Service list Suica/pasmo (little endian)
|
||||
#define SERVICE_SUICA_INOUT 0x108f // SUICA/PASMO
|
||||
#define SERVICE_SUICA_HISTORY 0x090f // SUICA/PASMO
|
||||
#define SERVICE_FELICA_LITE_READONLY 0x0b00 // FeliCa Lite RO
|
||||
#define SERVICE_FELICA_LITE_READWRITE 0x0900 // FeliCa Lite RW
|
||||
|
||||
// Calypso protocol
|
||||
#define CALYPSO_GET_RESPONSE 0xC0
|
||||
#define CALYPSO_SELECT 0xA4
|
||||
#define CALYPSO_INVALIDATE 0x04
|
||||
#define CALYPSO_REHABILITATE 0x44
|
||||
#define CALYPSO_APPEND_RECORD 0xE2
|
||||
#define CALYPSO_DECREASE 0x30
|
||||
#define CALYPSO_INCREASE 0x32
|
||||
#define CALYPSO_READ_BINARY 0xB0
|
||||
#define CALYPSO_READ_RECORD 0xB2
|
||||
#define CALYPSO_UPDATE_BINARY 0xD6
|
||||
#define CALYPSO_UPDATE_RECORD 0xDC
|
||||
#define CALYPSO_WRITE_RECORD 0xD2
|
||||
#define CALYPSO_OPEN_SESSION 0x8A
|
||||
#define CALYPSO_CLOSE_SESSION 0x8E
|
||||
#define CALYPSO_GET_CHALLENGE 0x84
|
||||
#define CALYPSO_CHANGE_PIN 0xD8
|
||||
#define CALYPSO_VERIFY_PIN 0x20
|
||||
#define CALYPSO_SV_GET 0x7C
|
||||
#define CALYPSO_SV_DEBIT 0xBA
|
||||
#define CALYPSO_SV_RELOAD 0xB8
|
||||
#define CALYPSO_SV_UN_DEBIT 0xBC
|
||||
#define CALYPSO_SAM_SV_DEBIT 0x54
|
||||
#define CALYPSO_SAM_SV_RELOAD 0x56
|
||||
|
||||
#endif
|
||||
// PROTOCOLS_H
|
||||
|
|
@ -11,11 +11,12 @@
|
|||
#ifndef __PROXMARK3_H
|
||||
#define __PROXMARK3_H
|
||||
|
||||
#include "common.h"
|
||||
|
||||
// Might as well have the hardware-specific defines everywhere.
|
||||
#include "at91sam7s512.h"
|
||||
#include "config_gpio.h"
|
||||
#include "pm3_cmd.h"
|
||||
#include "common.h"
|
||||
|
||||
// Check bootrom.c for actual clock settings
|
||||
#define MAINCK 16000000
|
||||
26
include/usart_defs.h
Normal file
26
include/usart_defs.h
Normal file
|
|
@ -0,0 +1,26 @@
|
|||
#ifndef __USART_DEFS_H
|
||||
#define __USART_DEFS_H
|
||||
|
||||
//#define USART_BAUD_RATE 9600
|
||||
#define USART_BAUD_RATE 115200
|
||||
// BT HC-06 physical layer runs at 128kbps
|
||||
// so it's possible to gain a little bit by using 230400
|
||||
// with some risk to overflow its internal buffers:
|
||||
//#define USART_BAUD_RATE 230400
|
||||
|
||||
#define USART_BUFFLEN 512
|
||||
#define USART_FIFOLEN (2*USART_BUFFLEN)
|
||||
|
||||
// Higher baudrates are pointless, only increasing overflow risk
|
||||
|
||||
#define USART_PARITY 'N'
|
||||
|
||||
#if defined (_WIN32)
|
||||
#define SERIAL_PORT_EXAMPLE_H "com3"
|
||||
#elif defined(__APPLE__)
|
||||
#define SERIAL_PORT_EXAMPLE_H "/dev/cu.usbmodem"
|
||||
#else
|
||||
#define SERIAL_PORT_EXAMPLE_H "/dev/ttyACM0"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
Loading…
Add table
Add a link
Reference in a new issue