diff --git a/doc/cloner_notes.md b/doc/cloner_notes.md
new file mode 100644
index 000000000..b3f33a1c4
--- /dev/null
+++ b/doc/cloner_notes.md
@@ -0,0 +1,52 @@
+# Notes on Cloner gunes
+
+This document is based mostly on information posted on http://www.proxmark.org/forum/viewtopic.php?pid=39903#p39903
+
+- [Blue and black cloners](#blue-and-black-cloners)
+- [White cloner (pre 2015)](#white-cloner-(pre-2015))
+- [White cloner (after 2016)](#white-cloner-(after-2016))
+- [White cloner (after 2016 D Quality)](#white-cloner-(after-2016-d-quality))
+- [restore page1 data](#restore-page1-data)
+
+
+# Blue and black cloners
+
+3 variants: 
+    1) EM cloner
+    2) HID cloner
+    3) EM/HID cloner
+
+Quality varies my manufacturer (Quality A (Good) until D (Bad))
+They set a password on block 7 of the chip and set the password enable bit in block 0
+Standard password is normally:    51243648
+Be sure to purchase the EM/HID version
+
+# White cloner (pre 2015)
+Multifrequency
+Buttons light up BLUE
+Reads data correctly
+Standard password is normally (for T55xx):  *AA55BBBB*
+Standard password 13,56mHz:       individual per white cloner
+Coil performance acceptable 
+
+# White cloner (after 2016)
+Multifrequency
+Buttons light up  WHITE
+Data scrambled (variable per individual cloner, possibly due to prevent legal issues)
+Standard password is normally (for T55xx):  *AA55BBBB*
+Standard password 13,56mHz:       individual per white cloner
+Coil performance good
+
+# White cloner (after 2016 D Quality)
+Multifrequency (Well it says so....but it doesn't....)
+Only works for EM/HID card (125kHz)
+High frequency not working
+Standard password is normally (for T55xx):  *AA55BBBB*
+*Note: Sets the HID card in TEST MODE*
+
+
+# Restore page1 data
+```
+lf t55xx write b 1 d E0150A48 1
+If t55xx write b 2 d 2D782308 1
+```