github/RRG-Proxmark3
1
0
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2025-08-14 18:48:13 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions

Updated wsl instructions

Browse source
This commit is contained in:
gator96100 2020-12-29 17:50:43 +01:00
commit 9c43f8e44f
1 changed files with 26 additions and 13 deletions
Download patch file Download diff file Expand all files Collapse all files

39
doc/md/Installation_Instructions/Windows-Installation-Instructions.md
View file

@ -149,18 +149,31 @@ Note that it may take a quite long time for a freshly plugged Proxmark3 to be vi
Now you're ready to follow the [compilation instructions](/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md).
## Color text on windows 10
In later versions of windows 10 you may be able to get color to work by setting this registry key
```
[HKEY_CURRENT_USER\Console]
"VirtualTerminalLevel"=dword:00000001
```
You also need to disable "use legacy console" in the cmd.exe properties, or set the following registry key
```
[HKEY_CURRENT_USER\Console]
"ForceV2"=dword:00000001
```
After making these changes, you will need to start a new command prompt (cmd.exe) to ensure its using the new settings.
If after making these changes (and restarting proxmark3.exe) you get extra characters and no color text, set either key to 0 or enable legacy mode again (and restart the command prompt).
## (Optional) Visual Studio Code debugging
Download and install [J-Link Software and Documentation pack for Windows](https://www.segger.com/downloads/jlink/JLink_Windows.exe)
Enter WSL prompt (`wsl` or `start windows terminal`) and from there, follow the [Linux Installation Instructions](/doc/md/Installation_Instructions/Linux-Installation-Instructions.md) for Ubuntu, summarized here below:
Install dependencies
```sh
sudo apt-get install --no-install-recommends binutils-arm-none-eabi gdb openocd gdb-multiarch
```
The J-Link debugger requires `arm-none-eabi-gdb` which was replaced with `gdb-multiarch`. In order to use the J-Link debugger link `arm-none-eabi-gdb` to `gdb-multiarch`:
```sh
sudo ln -s /usr/bin/gdb-multiarch /usr/bin/arm-none-eabi-gdb
```
Setup the Visual Studio Code configuration, by going into your project folder and run:
```sh
./.vscode/setup.sh
```
and launch Visual Studio Code
```sh
code .
```
_note_
Please install the recommended Visual Studio Code extensions in order for debugging to work.