Merge pull request #456 from 7homasSutter/felica_support_add_write_without_encryption

Felica support: add write without encryption command
This commit is contained in:
Iceman 2019-10-29 16:15:06 +01:00 committed by GitHub
commit 841bd91506
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
6 changed files with 228 additions and 91 deletions

View file

@ -1589,10 +1589,10 @@ static void PacketReceived(PacketCommandNG *packet) {
BigBuf_free();
}
uint16_t offset = MIN(BIGBUF_SIZE - PM3_CMD_DATA_SIZE - 3, payload->offset);
// need to copy len bytes of data, not PM3_CMD_DATA_SIZE - 3 - offset
// ensure len bytes copied wont go past end of bigbuf
uint16_t len = MIN(BIGBUF_SIZE - offset,PM3_CMD_DATA_SIZE - 3);
uint16_t len = MIN(BIGBUF_SIZE - offset, PM3_CMD_DATA_SIZE - 3);
uint8_t *mem = BigBuf_get_addr();
memcpy(mem + offset, &payload->data, len);

View file

@ -18,7 +18,5 @@ void felica_sendraw(PacketCommandNG *c);
void felica_sniff(uint32_t samplesToSkip, uint32_t triggersToSkip);
void felica_sim_lite(uint64_t uid);
void felica_dump_lite_s();
void felica_create_read_block_frame(uint16_t blockNr);
void felica_send_request_service(uint8_t *request_service);
#endif

View file

@ -112,6 +112,7 @@ static int usage_hf_felica_request_response(void) {
PrintAndLogEx(NORMAL, "\nUsage: hf felica rqresponse [-h]");
PrintAndLogEx(NORMAL, " -h this help");
PrintAndLogEx(NORMAL, " -i <0A0B0C ... hex> set custom IDm to use");
PrintAndLogEx(NORMAL, " hf felica rqresponse -i 01100910c11bc407");
return PM3_SUCCESS;
}
@ -159,15 +160,7 @@ static void print_status_flag2_interpration() {
PrintAndLogEx(NORMAL, " - C2h : Command is disabled already: This is the error that occurs in issuance commands.");
}
static int usage_hf_felica_read_without_encryption() {
PrintAndLogEx(NORMAL, "\nInfo: Use this command to read Block Data from authentication-not-required Service.");
PrintAndLogEx(NORMAL, " - Mode shall be Mode0.");
PrintAndLogEx(NORMAL, " - Number of Service: shall be a positive integer in the range of 1 to 16, inclusive.");
PrintAndLogEx(NORMAL, " - Number of Block: shall be less than or equal to the maximum number of Blocks that can be read simultaneously. "
"The maximum number of Blocks that can be read simultaneously can differ, depending on the product being used. Use as default 01");
PrintAndLogEx(NORMAL, " - Service Code List: For Service Code List, only Service Code existing in the product shall be specified:");
PrintAndLogEx(NORMAL, " - Even when Service Code exists in the product, Service Code not referenced from Block List shall not be specified to Service Code List.");
PrintAndLogEx(NORMAL, " - For existence or nonexistence of Service in a product, please check using the Request Service (or Request Service v2) command.");
static void print_block_list_element_constraints() {
PrintAndLogEx(NORMAL, " - Each Block List Element shall satisfy the following conditions:");
PrintAndLogEx(NORMAL, " - The value of Service Code List Order shall not exceed Number of Service.");
PrintAndLogEx(NORMAL, " - Access Mode shall be 000b.");
@ -175,6 +168,30 @@ static int usage_hf_felica_read_without_encryption() {
PrintAndLogEx(NORMAL, " - Service specified in Service Code List shall exist in System.");
PrintAndLogEx(NORMAL, " - Service Attribute of Service specified in Service Code List shall be authentication-not-required Service.");
PrintAndLogEx(NORMAL, " - Block Number shall be in the range of the number of Blocks assigned to the specified Service.");
}
static void print_number_of_service_constraints() {
PrintAndLogEx(NORMAL, " - Number of Service: shall be a positive integer in the range of 1 to 16, inclusive.");
}
static void print_number_of_block_constraints() {
PrintAndLogEx(NORMAL, " - Number of Block: shall be less than or equal to the maximum number of Blocks that can be read simultaneously. "
"The maximum number of Blocks that can be read simultaneously can differ, depending on the product being used. Use as default 01");
}
static void print_service_code_list_constraints() {
PrintAndLogEx(NORMAL, " - Service Code List: For Service Code List, only Service Code existing in the product shall be specified:");
PrintAndLogEx(NORMAL, " - Even when Service Code exists in the product, Service Code not referenced from Block List shall not be specified to Service Code List.");
PrintAndLogEx(NORMAL, " - For existence or nonexistence of Service in a product, please check using the Request Service (or Request Service v2) command.");
}
static int usage_hf_felica_read_without_encryption() {
PrintAndLogEx(NORMAL, "\nInfo: Use this command to read Block Data from authentication-not-required Service.");
PrintAndLogEx(NORMAL, " - Mode shall be Mode0.");
print_number_of_service_constraints();
print_number_of_block_constraints();
print_service_code_list_constraints();
print_block_list_element_constraints();
PrintAndLogEx(NORMAL, " - Successful read: Card responses the block data");
PrintAndLogEx(NORMAL, " - Unsuccessful read: Card responses with Status Flag1 and Flag2");
print_status_flag1_interpretation();
@ -187,7 +204,27 @@ static int usage_hf_felica_read_without_encryption() {
PrintAndLogEx(NORMAL, "\nExamples: ");
PrintAndLogEx(NORMAL, " hf felica rdunencrypted 01 8B00 01 8000");
PrintAndLogEx(NORMAL, " hf felica rdunencrypted -i 01100910c11bc407 01 8B00 01 8000");
PrintAndLogEx(NORMAL, " hf felica rdunencrypted -b 01 8B00 01 8000\n\n");
PrintAndLogEx(NORMAL, " hf felica rdunencrypted -b 01 4B18 01 8000\n\n");
return PM3_SUCCESS;
}
static int usage_hf_felica_write_without_encryption() {
PrintAndLogEx(NORMAL, "\nInfo: Use this command to write Block Data to authentication-not-required Service.");
PrintAndLogEx(NORMAL, " - Mode shall be Mode0.");
print_number_of_service_constraints();
print_number_of_block_constraints();
print_service_code_list_constraints();
print_block_list_element_constraints();
PrintAndLogEx(NORMAL, " - Un-/Successful read: Card responses with Status Flag1 and Flag2");
print_status_flag1_interpretation();
print_status_flag2_interpration();
PrintAndLogEx(NORMAL, "\nUsage: hf felica wrunencrypted [-h] <01 Number of Service hex> <0A0B Service Code List (Little Endian) hex> <01 Number of Block hex> <0A0B Block List Element hex> <0A0B0C0D0E0F... Data hex (16-Byte)>");
PrintAndLogEx(NORMAL, " -h this help");
PrintAndLogEx(NORMAL, " -i <0A0B0C ... hex> set custom IDm to use\n");
PrintAndLogEx(NORMAL, " hf felica wrunencrypted 01 CB10 01 8001 0102030405060708090A0B0C0D0E0F10\n\n");
PrintAndLogEx(NORMAL, "\nExamples: ");
PrintAndLogEx(NORMAL, " hf felica wrunencrypted ");
return PM3_SUCCESS;
}
@ -208,6 +245,10 @@ static bool waitCmdFelica(uint8_t iSelect, PacketResponseNG *resp, bool verbose)
if (!check_crc(CRC_FELICA, resp->data.asBytes + 2, len - 2)) {
PrintAndLogEx(WARNING, "Wrong or no CRC bytes");
}
if (resp->data.asBytes[0] != 0xB2 && resp->data.asBytes[1] != 0x4D) {
PrintAndLogEx(ERR, "Received incorrect Frame Format!");
return false;
}
}
return true;
} else {
@ -294,7 +335,8 @@ static bool add_param(const char *Cmd, uint8_t paramCount, uint8_t *data, uint8_
param_gethex(Cmd, paramCount, data + dataPosition, length);
return true;
} else {
PrintAndLogEx(ERR, "Incorrect Parameter length! Param %i", paramCount);
PrintAndLogEx(ERR, "Param %s", Cmd);
PrintAndLogEx(ERR, "Incorrect Parameter length! Param %i should be %i", paramCount, length);
return false;
}
}
@ -304,7 +346,7 @@ static bool add_param(const char *Cmd, uint8_t paramCount, uint8_t *data, uint8_
* @param rd_noCry_resp Response frame.
*/
static void print_rd_noEncrpytion_response(felica_read_without_encryption_response_t *rd_noCry_resp) {
if (rd_noCry_resp->status_flag1[0] == 00 && rd_noCry_resp->status_flag2[0] == 00) {
if (rd_noCry_resp->status_flags.status_flag1[0] == 00 && rd_noCry_resp->status_flags.status_flag2[0] == 00) {
char *temp = sprint_hex(rd_noCry_resp->block_data, sizeof(rd_noCry_resp->block_data));
char bl_data[256];
strcpy(bl_data, temp);
@ -314,9 +356,9 @@ static void print_rd_noEncrpytion_response(felica_read_without_encryption_respon
strcpy(bl_element_number, temp);
PrintAndLogEx(NORMAL, "\t%s\t| %s ", bl_element_number, bl_data);
} else {
PrintAndLogEx(NORMAL, "IDm: %s", sprint_hex(rd_noCry_resp->IDm, sizeof(rd_noCry_resp->IDm)));
PrintAndLogEx(NORMAL, "Status Flag1: %s", sprint_hex(rd_noCry_resp->status_flag1, sizeof(rd_noCry_resp->status_flag1)));
PrintAndLogEx(NORMAL, "Status Flag2: %s", sprint_hex(rd_noCry_resp->status_flag1, sizeof(rd_noCry_resp->status_flag1)));
PrintAndLogEx(NORMAL, "IDm: %s", sprint_hex(rd_noCry_resp->frame_response.IDm, sizeof(rd_noCry_resp->frame_response.IDm)));
PrintAndLogEx(NORMAL, "Status Flag1: %s", sprint_hex(rd_noCry_resp->status_flags.status_flag1, sizeof(rd_noCry_resp->status_flags.status_flag1)));
PrintAndLogEx(NORMAL, "Status Flag2: %s", sprint_hex(rd_noCry_resp->status_flags.status_flag1, sizeof(rd_noCry_resp->status_flags.status_flag1)));
}
}
@ -334,9 +376,9 @@ int send_request_service(uint8_t flags, uint16_t datalen, uint8_t *data, bool ve
felica_request_service_response_t rqs_response;
memcpy(&rqs_response, (felica_request_service_response_t *)resp.data.asBytes, sizeof(felica_request_service_response_t));
if (rqs_response.IDm[0] != 0) {
if (rqs_response.frame_response.IDm[0] != 0) {
PrintAndLogEx(SUCCESS, "\nGot Service Response:");
PrintAndLogEx(NORMAL, "IDm: %s", sprint_hex(rqs_response.IDm, sizeof(rqs_response.IDm)));
PrintAndLogEx(NORMAL, "IDm: %s", sprint_hex(rqs_response.frame_response.IDm, sizeof(rqs_response.frame_response.IDm)));
PrintAndLogEx(NORMAL, " -Node Number: %s", sprint_hex(rqs_response.node_number, sizeof(rqs_response.node_number)));
PrintAndLogEx(NORMAL, " -Node Key Version List: %s\n", sprint_hex(rqs_response.node_key_versions, sizeof(rqs_response.node_key_versions)));
}
@ -351,7 +393,7 @@ int send_request_service(uint8_t flags, uint16_t datalen, uint8_t *data, bool ve
* @param datalen frame length.
* @param data frame to be send.
* @param verbose display additional output.
* @param rd_noCry_resp frame in which the response will be saved
* @param rd_noCry_resp frame in which the response will be saved.
* @return success if response was received.
*/
int send_rd_unencrypted(uint8_t flags, uint16_t datalen, uint8_t *data, bool verbose, felica_read_without_encryption_response_t *rd_noCry_resp) {
@ -367,6 +409,110 @@ int send_rd_unencrypted(uint8_t flags, uint16_t datalen, uint8_t *data, bool ver
}
}
/**
* Checks if last known card can be added to data and adds it if possible.
* @param custom_IDm
* @param data
* @return
*/
static bool check_last_idm(uint8_t *data, uint16_t datalen) {
if (!add_last_IDm(2, data)) {
PrintAndLogEx(ERR, "No last known card! Use reader first or set a custom IDm!");
return 0;
} else {
PrintAndLogEx(INFO, "Used last known IDm.", sprint_hex(data, datalen));
return 1;
}
}
/**
* Sends a read_without_encryption frame to the pm3 and prints response.
* @param flags to use for pm3 communication.
* @param datalen frame length.
* @param data frame to be send.
* @param verbose display additional output.
* @param wr_noCry_resp frame in which the response will be saved.
* @return success if response was received.
*/
int send_wr_unencrypted(uint8_t flags, uint16_t datalen, uint8_t *data, bool verbose, felica_status_response_t *wr_noCry_resp) {
clear_and_send_command(flags, datalen, data, verbose);
PacketResponseNG resp;
if (!waitCmdFelica(0, &resp, verbose)) {
PrintAndLogEx(ERR, "\nGot no Response from card");
return PM3_ERFTRANS;
} else {
memcpy(wr_noCry_resp, (felica_status_response_t *)resp.data.asBytes, sizeof(felica_status_response_t));
return PM3_SUCCESS;
}
}
/**
* Command parser for wrunencrypted.
* @param Cmd input data of the user.
* @return client result code.
*/
static int CmdHFFelicaWriteWithoutEncryption(const char *Cmd) {
if (strlen(Cmd) < 5)
return usage_hf_felica_write_without_encryption();
uint8_t data[PM3_CMD_DATA_SIZE];
bool custom_IDm = false;
strip_cmds(Cmd);
uint16_t datalen = 32; // Length (1), Command ID (1), IDm (8), Number of Service (1), Service Code List(2), Number of Block(1), Block List(3), Block Data(16)
uint8_t paramCount = 0;
uint8_t flags = 0;
int i = 0;
while (Cmd[i] != '\0') {
if (Cmd[i] == '-') {
switch (Cmd[i + 1]) {
case 'H':
case 'h':
return usage_hf_felica_request_response();
case 'i':
paramCount++;
custom_IDm = true;
if (!add_param(Cmd, paramCount, data, 2, 16)) {
return PM3_EINVARG;
}
paramCount++;
i += 16;
break;
}
}
i++;
}
data[0] = 0x20; // Static length
data[1] = 0x08; // Command ID
if (!custom_IDm && !check_last_idm(data, datalen)) {
return PM3_EINVARG;
}
// Number of Service 2, Service Code List 4, Number of Block 2, Block List Element 4, Data 16
uint8_t lengths[] = {2, 4, 2, 4, 32};
uint8_t dataPositions[] = {10, 11, 13, 14, 16};
for (int i = 0; i < 5; i++) {
if (add_param(Cmd, paramCount, data, dataPositions[i], lengths[i])) {
paramCount++;
} else {
return PM3_EINVARG;
}
}
flags |= FELICA_APPEND_CRC;
flags |= FELICA_RAW;
AddCrc(data, datalen);
datalen += 2;
felica_status_response_t wr_noCry_resp;
if (send_wr_unencrypted(flags, datalen, data, 1, &wr_noCry_resp) == PM3_SUCCESS) {
PrintAndLogEx(NORMAL, "\nIDm: %s", sprint_hex(wr_noCry_resp.frame_response.IDm, sizeof(wr_noCry_resp.frame_response.IDm)));
PrintAndLogEx(NORMAL, "Status Flag1: %s", sprint_hex(wr_noCry_resp.status_flags.status_flag1, sizeof(wr_noCry_resp.status_flags.status_flag1)));
PrintAndLogEx(NORMAL, "Status Flag2: %s\n", sprint_hex(wr_noCry_resp.status_flags.status_flag2, sizeof(wr_noCry_resp.status_flags.status_flag2)));
if (wr_noCry_resp.status_flags.status_flag1[0] == 0x00 && wr_noCry_resp.status_flags.status_flag2[0] == 0x00) {
PrintAndLogEx(SUCCESS, "Writing data successful!\n");
} else {
PrintAndLogEx(ERR, "Something went wrong! Check status flags.\n");
}
}
return PM3_SUCCESS;
}
/**
* Command parser for rdunencrypted.
* @param Cmd input data of the user.
@ -393,9 +539,11 @@ static int CmdHFFelicaReadWithoutEncryption(const char *Cmd) {
case 'i':
paramCount++;
custom_IDm = true;
if (!add_param(Cmd, paramCount, data, 3, 8)) {
if (!add_param(Cmd, paramCount, data, 2, 16)) {
return PM3_EINVARG;
}
paramCount++;
i += 16;
break;
case 'b':
paramCount++;
@ -411,13 +559,8 @@ static int CmdHFFelicaReadWithoutEncryption(const char *Cmd) {
}
data[0] = 0x10; // Static length
data[1] = 0x06; // Command ID
if (!custom_IDm) {
if (!add_last_IDm(2, data)) {
PrintAndLogEx(ERR, "No last known card! Use reader first or set a custom IDm!");
return PM3_EINVARG;
} else {
PrintAndLogEx(INFO, "Used last known IDm.", sprint_hex(data, datalen));
}
if (!custom_IDm && !check_last_idm(data, datalen)) {
return PM3_EINVARG;
}
// Number of Service 2, Service Code List 4, Number of Block 2, Block List Element 4
uint8_t lengths[] = {2, 4, 2, 4};
@ -448,7 +591,7 @@ static int CmdHFFelicaReadWithoutEncryption(const char *Cmd) {
datalen += 2;
felica_read_without_encryption_response_t rd_noCry_resp;
if ((send_rd_unencrypted(flags, datalen, data, 0, &rd_noCry_resp) == PM3_SUCCESS)) {
if (rd_noCry_resp.status_flag1[0] == 00 && rd_noCry_resp.status_flag2[0] == 00) {
if (rd_noCry_resp.status_flags.status_flag1[0] == 00 && rd_noCry_resp.status_flags.status_flag2[0] == 00) {
print_rd_noEncrpytion_response(&rd_noCry_resp);
} else {
break;
@ -462,9 +605,10 @@ static int CmdHFFelicaReadWithoutEncryption(const char *Cmd) {
AddCrc(data, datalen);
datalen += 2;
felica_read_without_encryption_response_t rd_noCry_resp;
send_rd_unencrypted(flags, datalen, data, 1, &rd_noCry_resp);
PrintAndLogEx(NORMAL, "Block Element\t| Data ");
print_rd_noEncrpytion_response(&rd_noCry_resp);
if (send_rd_unencrypted(flags, datalen, data, 1, &rd_noCry_resp) == PM3_SUCCESS) {
PrintAndLogEx(NORMAL, "Block Element\t| Data ");
print_rd_noEncrpytion_response(&rd_noCry_resp);
}
}
return PM3_SUCCESS;
}
@ -491,12 +635,11 @@ static int CmdHFFelicaRequestResponse(const char *Cmd) {
case 'i':
paramCount++;
custom_IDm = true;
if (param_getlength(Cmd, paramCount) == 16) {
param_gethex(Cmd, paramCount++, data + 2, 16);
} else {
PrintAndLogEx(ERR, "Incorrect IDm length! IDm must be 8-Byte.");
if (!add_param(Cmd, paramCount, data, 2, 16)) {
return PM3_EINVARG;
}
paramCount++;
i += 16;
break;
}
}
@ -504,13 +647,8 @@ static int CmdHFFelicaRequestResponse(const char *Cmd) {
}
data[0] = 0x0A; // Static length
data[1] = 0x04; // Command ID
if (!custom_IDm) {
if (!add_last_IDm(2, data)) {
PrintAndLogEx(ERR, "No last known card! Use reader first or set a custom IDm!");
return PM3_EINVARG;
} else {
PrintAndLogEx(INFO, "Used last known IDm.", sprint_hex(data, datalen));
}
if (!custom_IDm && !check_last_idm(data, datalen)) {
return PM3_EINVARG;
}
AddCrc(data, datalen);
datalen += 2;
@ -524,9 +662,9 @@ static int CmdHFFelicaRequestResponse(const char *Cmd) {
} else {
felica_request_request_response_t rq_response;
memcpy(&rq_response, (felica_request_request_response_t *)resp.data.asBytes, sizeof(felica_request_request_response_t));
if (rq_response.IDm[0] != 0) {
if (rq_response.frame_response.IDm[0] != 0) {
PrintAndLogEx(SUCCESS, "\nGot Request Response:");
PrintAndLogEx(NORMAL, "IDm: %s", sprint_hex(rq_response.IDm, sizeof(rq_response.IDm)));
PrintAndLogEx(NORMAL, "IDm: %s", sprint_hex(rq_response.frame_response.IDm, sizeof(rq_response.frame_response.IDm)));
PrintAndLogEx(NORMAL, " -Mode: %s\n\n", sprint_hex(rq_response.mode, sizeof(rq_response.mode)));
}
}
@ -558,13 +696,11 @@ static int CmdHFFelicaRequestService(const char *Cmd) {
case 'i':
paramCount++;
custom_IDm = true;
if (param_getlength(Cmd, paramCount) == 16) {
param_gethex(Cmd, paramCount++, data + 2, 16);
} else {
PrintAndLogEx(ERR, "Incorrect IDm length! IDm must be 8-Byte.");
if (!add_param(Cmd, paramCount, data, 2, 16)) {
return PM3_EINVARG;
}
i += 8;
paramCount++;
i += 16;
break;
case 'a':
paramCount++;
@ -603,13 +739,8 @@ static int CmdHFFelicaRequestService(const char *Cmd) {
flags |= FELICA_RAW;
}
datalen = (datalen > PM3_CMD_DATA_SIZE) ? PM3_CMD_DATA_SIZE : datalen;
if (!custom_IDm) {
if (!add_last_IDm(2, data)) {
PrintAndLogEx(ERR, "No last known card! Use reader first or set a custom IDm!");
return PM3_EINVARG;
} else {
PrintAndLogEx(INFO, "Used last known IDm.", sprint_hex(data, datalen));
}
if (!custom_IDm && !check_last_idm(data, datalen)) {
return PM3_EINVARG;
}
data[0] = int_to_hex(&datalen);
data[1] = 0x02; // Service Request Command ID
@ -1139,27 +1270,27 @@ static command_t CommandTable[] = {
{"reader", CmdHFFelicaReader, IfPm3Felica, "Act like an ISO18092/FeliCa reader"},
{"sniff", CmdHFFelicaSniff, IfPm3Felica, "Sniff ISO 18092/FeliCa traffic"},
{"raw", CmdHFFelicaCmdRaw, IfPm3Felica, "Send raw hex data to tag"},
{"----------- FeliCa Standard (support in progress) -----------", CmdHelp, IfPm3Iso14443a, ""},
//{"dump", CmdHFFelicaDump, IfPm3Felica, "Wait for and try dumping FeliCa"},
{"rqservice", CmdHFFelicaRequestService, IfPm3Felica, "verify the existence of Area and Service, and to acquire Key Version."},
{"rqresponse", CmdHFFelicaRequestResponse, IfPm3Felica, "verify the existence of a card and its Mode."},
{"rdunencrypted", CmdHFFelicaReadWithoutEncryption, IfPm3Felica, "read Block Data from authentication-not-required Service."},
{"wrunencrypted", CmdHFFelicaNotImplementedYet, IfPm3Felica, "write Block Data to an authentication-not-required Service."},
//{"scsvcode", CmdHFFelicaNotImplementedYet, IfPm3Felica, "acquire Area Code and Service Code."},
//{"rqsyscode", CmdHFFelicaNotImplementedYet, IfPm3Felica, "acquire System Code registered to the card."},
//{"auth1", CmdHFFelicaNotImplementedYet, IfPm3Felica, "authenticate a card."},
//{"auth2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "allow a card to authenticate a Reader/Writer."},
//{"read", CmdHFFelicaNotImplementedYet, IfPm3Felica, "read Block Data from authentication-required Service."},
//{"write", CmdHFFelicaNotImplementedYet, IfPm3Felica, "write Block Data to an authentication-required Service."},
//{"scsvcodev2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "verify the existence of Area or Service, and to acquire Key Version."},
//{"getsysstatus", CmdHFFelicaNotImplementedYet, IfPm3Felica, "acquire the setup information in System."},
//{"rqspecver", CmdHFFelicaNotImplementedYet, IfPm3Felica, "acquire the version of card OS."},
//{"resetmode", CmdHFFelicaNotImplementedYet, IfPm3Felica, "reset Mode to Mode 0."},
//{"auth1v2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "authenticate a card."},
//{"auth2v2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "allow a card to authenticate a Reader/Writer."},
//{"readv2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "read Block Data from authentication-required Service."},
//{"writev2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "write Block Data to authentication-required Service."},
//{"uprandomid", CmdHFFelicaNotImplementedYet, IfPm3Felica, "update Random ID (IDr)."},
{"----------- FeliCa Standard (support in progress) -----------", CmdHelp, IfPm3Iso14443a, ""},
//{"dump", CmdHFFelicaDump, IfPm3Felica, "Wait for and try dumping FeliCa"},
{"rqservice", CmdHFFelicaRequestService, IfPm3Felica, "verify the existence of Area and Service, and to acquire Key Version."},
{"rqresponse", CmdHFFelicaRequestResponse, IfPm3Felica, "verify the existence of a card and its Mode."},
{"rdunencrypted", CmdHFFelicaReadWithoutEncryption, IfPm3Felica, "read Block Data from authentication-not-required Service."},
{"wrunencrypted", CmdHFFelicaWriteWithoutEncryption, IfPm3Felica, "write Block Data to an authentication-not-required Service."},
{"scsvcode", CmdHFFelicaNotImplementedYet, IfPm3Felica, "acquire Area Code and Service Code."},
//{"rqsyscode", CmdHFFelicaNotImplementedYet, IfPm3Felica, "acquire System Code registered to the card."},
//{"auth1", CmdHFFelicaNotImplementedYet, IfPm3Felica, "authenticate a card."},
//{"auth2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "allow a card to authenticate a Reader/Writer."},
//{"read", CmdHFFelicaNotImplementedYet, IfPm3Felica, "read Block Data from authentication-required Service."},
//{"write", CmdHFFelicaNotImplementedYet, IfPm3Felica, "write Block Data to an authentication-required Service."},
//{"scsvcodev2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "verify the existence of Area or Service, and to acquire Key Version."},
//{"getsysstatus", CmdHFFelicaNotImplementedYet, IfPm3Felica, "acquire the setup information in System."},
//{"rqspecver", CmdHFFelicaNotImplementedYet, IfPm3Felica, "acquire the version of card OS."},
//{"resetmode", CmdHFFelicaNotImplementedYet, IfPm3Felica, "reset Mode to Mode 0."},
//{"auth1v2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "authenticate a card."},
//{"auth2v2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "allow a card to authenticate a Reader/Writer."},
//{"readv2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "read Block Data from authentication-required Service."},
//{"writev2", CmdHFFelicaNotImplementedYet, IfPm3Felica, "write Block Data to authentication-required Service."},
//{"uprandomid", CmdHFFelicaNotImplementedYet, IfPm3Felica, "update Random ID (IDr)."},
{"----------- FeliCa Light -----------", CmdHelp, IfPm3Iso14443a, ""},
{"litesim", CmdHFFelicaSimLite, IfPm3Felica, "<NDEF2> - only reply to poll request"},
{"litedump", CmdHFFelicaDumpLite, IfPm3Felica, "Wait for and try dumping FelicaLite"},

View file

@ -18,4 +18,5 @@ int CmdHFFelica(const char *Cmd);
int readFelicaUid(bool verbose);
int send_request_service(uint8_t flags, uint16_t datalen, uint8_t *data, bool verbose);
int send_rd_unencrypted(uint8_t flags, uint16_t datalen, uint8_t *data, bool verbose, felica_read_without_encryption_response_t *rd_noCry_resp);
#endif

View file

@ -482,7 +482,7 @@ static bool DetectWindowsAnsiSupport(void) {
HKEY hKey = NULL;
bool virtualTerminalLevelSet = false;
bool forceV2Set = false;
if (RegOpenKeyA(HKEY_CURRENT_USER, "Console", &hKey) == ERROR_SUCCESS) {
DWORD dwType = REG_SZ;
BYTE KeyValue[sizeof(dwType)];

View file

@ -174,30 +174,37 @@ typedef struct {
uint8_t length[1];
uint8_t cmd_code[1];
uint8_t IDm[8];
} PACKED felica_frame_response_t;
typedef struct {
uint8_t status_flag1[1];
uint8_t status_flag2[1];
} PACKED felica_status_flags_t;
typedef struct {
felica_frame_response_t frame_response;
uint8_t node_number[1];
uint8_t node_key_versions[2];
} PACKED felica_request_service_response_t;
typedef struct {
uint8_t sync[2];
uint8_t length[1];
uint8_t cmd_code[1];
uint8_t IDm[8];
felica_frame_response_t frame_response;
uint8_t mode[1];
} PACKED felica_request_request_response_t;
typedef struct {
uint8_t sync[2];
uint8_t length[1];
uint8_t cmd_code[1];
uint8_t IDm[8];
uint8_t status_flag1[1];
uint8_t status_flag2[1];
felica_frame_response_t frame_response;
felica_status_flags_t status_flags;
uint8_t number_of_block[1];
uint8_t block_data[16];
uint8_t block_element_number[1];
} PACKED felica_read_without_encryption_response_t;
typedef struct {
felica_frame_response_t frame_response;
felica_status_flags_t status_flags;
} PACKED felica_status_response_t;
typedef enum FELICA_COMMAND {
FELICA_CONNECT = (1 << 0),
FELICA_NO_DISCONNECT = (1 << 1),