diff --git a/CHANGELOG.md b/CHANGELOG.md
index bcc22c54d..7e713803a 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -3,6 +3,7 @@ All notable changes to this project will be documented in this file.
 This project uses the changelog in accordance with [keepchangelog](http://keepachangelog.com/). Please use this to write notable changes, which is not the same as git commit log...
 
 ## [unreleased][unreleased]
+- show SPI flash JEDEC Manufacturer ID and Device ID in `hw status` output (@ANTodorov)
 - Improved `hf iclass configcards` to support generating config cards using a different key than the default k0 as the card's key (@antiklesys)
 - Added maur keys (@iceman1001)
 - Fixed `hf mfu pwdgen` for the 7 byte UID (@ANTodorov)
diff --git a/common_arm/flashmem.c b/common_arm/flashmem.c
index 2cb54ed39..b08d1b725 100644
--- a/common_arm/flashmem.c
+++ b/common_arm/flashmem.c
@@ -49,18 +49,28 @@ void FlashmemSetSpiBaudrate(uint32_t baudrate) {
 }
 
 // read ID out
-bool Flash_ReadID_90(flash_device_type_90_t *result) {
+bool Flash_ReadID(flash_device_type_t *result, bool read_jedec ) {
 
     if (Flash_CheckBusy(BUSY_TIMEOUT)) return false;
 
-    // Manufacture ID / device ID
-    FlashSendByte(ID);
-    FlashSendByte(0x00);
-    FlashSendByte(0x00);
-    FlashSendByte(0x00);
 
-    result->manufacturer_id = FlashSendByte(0xFF);
-    result->device_id       = FlashSendLastByte(0xFF);
+    if ( read_jedec) {
+        // 0x9F JEDEC
+        FlashSendByte(JEDECID);
+
+        result->manufacturer_id = FlashSendByte(0xFF);
+        result->device_id       = FlashSendByte(0xFF);
+        result->device_id2      = FlashSendLastByte(0xFF);
+    } else {
+        // 0x90 Manufacture ID / device ID
+        FlashSendByte(ID);
+        FlashSendByte(0x00);
+        FlashSendByte(0x00);
+        FlashSendByte(0x00);
+
+        result->manufacturer_id = FlashSendByte(0xFF);
+        result->device_id       = FlashSendLastByte(0xFF);
+    }
 
     return true;
 }
@@ -346,8 +356,8 @@ void Flashmem_print_status(void) {
 
     // NOTE: It would likely be more useful to use JDEC ID command 9F,
     //       as it provides a third byte indicative of capacity.
-    flash_device_type_90_t device_type = {0};
-    if (!Flash_ReadID_90(&device_type)) {
+    flash_device_type_t device_type = {0};
+    if (!Flash_ReadID(&device_type, false)) {
         DbpString("  Device ID............... " _RED_(" -->  Not Found  <--"));
     } else {
         if (device_type.manufacturer_id == WINBOND_MANID) {
@@ -370,6 +380,13 @@ void Flashmem_print_status(void) {
                      device_type.device_id
                     );
         }
+        if (Flash_ReadID(&device_type, true)) {
+            Dbprintf("  JEDEC Mfr ID / Dev ID... " _YELLOW_("%02X / %02X%02X"),
+                         device_type.manufacturer_id,
+                         device_type.device_id,
+                         device_type.device_id2
+                        );
+        }
     }
 
     uint8_t uid[8] = {0, 0, 0, 0, 0, 0, 0, 0};
diff --git a/common_arm/flashmem.h b/common_arm/flashmem.h
index f23a2786d..f79de4a58 100644
--- a/common_arm/flashmem.h
+++ b/common_arm/flashmem.h
@@ -129,8 +129,9 @@ bool Flash_Erase64k(uint8_t block);
 typedef struct {
     uint8_t manufacturer_id;
     uint8_t device_id;
-} flash_device_type_90_t; // to differentiate from JDEC ID via cmd 9F
-bool Flash_ReadID_90(flash_device_type_90_t *result);
+    uint8_t device_id2;
+} flash_device_type_t; // extra device_id used for the JEDEC ID read via cmd 9F
+bool Flash_ReadID(flash_device_type_t *result, bool read_jedec);
 
 uint16_t Flash_ReadData(uint32_t address, uint8_t *out, uint16_t len);
 uint16_t Flash_ReadDataCont(uint32_t address, uint8_t *out, uint16_t len);