From 6d1c996251ed5650684b505945bfbc9ac9cf51d4 Mon Sep 17 00:00:00 2001
From: iceman1001 <iceman@iuse.se>
Date: Tue, 30 Jul 2019 19:22:24 +0200
Subject: [PATCH] chg: flashing - test messages

---
 client/flash.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/client/flash.c b/client/flash.c
index f2f0b526a..ab41e090d 100644
--- a/client/flash.c
+++ b/client/flash.c
@@ -378,12 +378,12 @@ static int wait_for_ack(PacketResponseNG *ack) {
 }
 
 static void flash_suggest_update_bootloader(void) {
-    PrintAndLogEx(ERR, _RED_("It is recommended that you first update your bootloader alone,"));
+    PrintAndLogEx(ERR, _RED_("It is recommended that you first" _YELLOW_("update your bootloader") " alone,"));
     PrintAndLogEx(ERR, _RED_("reboot the Proxmark3 then only update the main firmware") "\n");
 }
 
 static void flash_suggest_update_flasher(void) {
-    PrintAndLogEx(ERR, _RED_("It is recommended that you first update your flasher"));
+    PrintAndLogEx(ERR, _RED_("It is recommended that you first" _YELLOW_("update your flasher") ));
 }
 
 // Go into flashing mode
@@ -413,18 +413,22 @@ int flash_start_flashing(int enable_bl_writes, char *serial_port_name, uint32_t
         if ((BL_VERSION_MAJOR(version) < BL_VERSION_FIRST_MAJOR) || (BL_VERSION_MAJOR(version) > BL_VERSION_LAST_MAJOR)) {
             // version info seems fishy
             version = BL_VERSION_INVALID;
+            PrintAndLogEx(ERR, _RED_("====================== OBS ! ==========================="));
             PrintAndLogEx(ERR, _RED_("Note: Your bootloader reported an invalid version number"));
             flash_suggest_update_bootloader();
             //
         } else if (BL_VERSION_MAJOR(version) < BL_VERSION_MAJOR(FLASHER_VERSION)) {
+            PrintAndLogEx(ERR, _RED_("====================== OBS ! ==================================="));            
             PrintAndLogEx(ERR, _RED_("Note: Your bootloader reported a version older than this flasher"));
             flash_suggest_update_bootloader();
         } else if (BL_VERSION_MAJOR(version) > BL_VERSION_MAJOR(FLASHER_VERSION)) {
+            PrintAndLogEx(ERR, _RED_("====================== OBS ! ========================="));            
             PrintAndLogEx(ERR, _RED_("Note: Your bootloader is more recent than this flasher"));
             flash_suggest_update_flasher();
         }
     } else {
-        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new CMD_BL_VERSION command"));
+        PrintAndLogEx(ERR, _RED_("====================== OBS ! ==========================================="));
+        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new" _YELLOW_("CMD_BL_VERSION") " command"));
         flash_suggest_update_bootloader();
     }
 
@@ -436,6 +440,7 @@ int flash_start_flashing(int enable_bl_writes, char *serial_port_name, uint32_t
         PrintAndLogEx(NORMAL, "Available memory on this board: %uK bytes\n", mem_avail);
         if (mem_avail > 256) {
             if (BL_VERSION_MAJOR(version) < BL_VERSION_MAJOR(BL_VERSION_1_0_0)) {
+                PrintAndLogEx(ERR, _RED_("====================== OBS ! ======================"));                
                 PrintAndLogEx(ERR, _RED_("Your bootloader does not support writing above 256k"));
                 flash_suggest_update_bootloader();
             } else {
@@ -445,7 +450,8 @@ int flash_start_flashing(int enable_bl_writes, char *serial_port_name, uint32_t
         }
     } else {
         PrintAndLogEx(NORMAL, "Available memory on this board: "_RED_("UNKNOWN")"\n");
-        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new CHIP_INFO command"));
+        PrintAndLogEx(ERR, _RED_("====================== OBS ! ======================================"));
+        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new" _YELLOW_("CHIP_INFO") " command"));
         flash_suggest_update_bootloader();
     }
 
@@ -464,7 +470,8 @@ int flash_start_flashing(int enable_bl_writes, char *serial_port_name, uint32_t
         }
         return wait_for_ack(&resp);
     } else {
-        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new START_FLASH command"));
+        PrintAndLogEx(ERR, _RED_("====================== OBS ! ========================================"));
+        PrintAndLogEx(ERR, _RED_("Note: Your bootloader does not understand the new" _YELLOW_("START_FLASH") " command"));
         flash_suggest_update_bootloader();
     }
     return 0;