mbedtls added

common/mbedtls/timing.h

@@ -0,0 +1,155 @@
+/**
+ * \file timing.h
+ *
+ * \brief Portable interface to timeouts and to the CPU cycle counter
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: GPL-2.0
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_TIMING_H
+#define MBEDTLS_TIMING_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if !defined(MBEDTLS_TIMING_ALT)
+// Regular implementation
+//
+
+/**
+ * \brief          timer structure
+ */
+struct mbedtls_timing_hr_time
+{
+    unsigned char opaque[32];
+};
+
+/**
+ * \brief          Context for mbedtls_timing_set/get_delay()
+ */
+typedef struct mbedtls_timing_delay_context
+{
+    struct mbedtls_timing_hr_time   timer;
+    uint32_t                        int_ms;
+    uint32_t                        fin_ms;
+} mbedtls_timing_delay_context;
+
+#else  /* MBEDTLS_TIMING_ALT */
+#include "timing_alt.h"
+#endif /* MBEDTLS_TIMING_ALT */
+
+extern volatile int mbedtls_timing_alarmed;
+
+/**
+ * \brief          Return the CPU cycle counter value
+ *
+ * \warning        This is only a best effort! Do not rely on this!
+ *                 In particular, it is known to be unreliable on virtual
+ *                 machines.
+ *
+ * \note           This value starts at an unspecified origin and
+ *                 may wrap around.
+ */
+unsigned long mbedtls_timing_hardclock( void );
+
+/**
+ * \brief          Return the elapsed time in milliseconds
+ *
+ * \param val      points to a timer structure
+ * \param reset    If 0, query the elapsed time. Otherwise (re)start the timer.
+ *
+ * \return         Elapsed time since the previous reset in ms. When
+ *                 restarting, this is always 0.
+ *
+ * \note           To initialize a timer, call this function with reset=1.
+ *
+ *                 Determining the elapsed time and resetting the timer is not
+ *                 atomic on all platforms, so after the sequence
+ *                 `{ get_timer(1); ...; time1 = get_timer(1); ...; time2 =
+ *                 get_timer(0) }` the value time1+time2 is only approximately
+ *                 the delay since the first reset.
+ */
+unsigned long mbedtls_timing_get_timer( struct mbedtls_timing_hr_time *val, int reset );
+
+/**
+ * \brief          Setup an alarm clock
+ *
+ * \param seconds  delay before the "mbedtls_timing_alarmed" flag is set
+ *                 (must be >=0)
+ *
+ * \warning        Only one alarm at a time  is supported. In a threaded
+ *                 context, this means one for the whole process, not one per
+ *                 thread.
+ */
+void mbedtls_set_alarm( int seconds );
+
+/**
+ * \brief          Set a pair of delays to watch
+ *                 (See \c mbedtls_timing_get_delay().)
+ *
+ * \param data     Pointer to timing data.
+ *                 Must point to a valid \c mbedtls_timing_delay_context struct.
+ * \param int_ms   First (intermediate) delay in milliseconds.
+ *                 The effect if int_ms > fin_ms is unspecified.
+ * \param fin_ms   Second (final) delay in milliseconds.
+ *                 Pass 0 to cancel the current delay.
+ *
+ * \note           To set a single delay, either use \c mbedtls_timing_set_timer
+ *                 directly or use this function with int_ms == fin_ms.
+ */
+void mbedtls_timing_set_delay( void *data, uint32_t int_ms, uint32_t fin_ms );
+
+/**
+ * \brief          Get the status of delays
+ *                 (Memory helper: number of delays passed.)
+ *
+ * \param data     Pointer to timing data
+ *                 Must point to a valid \c mbedtls_timing_delay_context struct.
+ *
+ * \return         -1 if cancelled (fin_ms = 0),
+ *                  0 if none of the delays are passed,
+ *                  1 if only the intermediate delay is passed,
+ *                  2 if the final delay is passed.
+ */
+int mbedtls_timing_get_delay( void *data );
+
+#if defined(MBEDTLS_SELF_TEST)
+/**
+ * \brief          Checkup routine
+ *
+ * \return         0 if successful, or 1 if a test failed
+ */
+int mbedtls_timing_self_test( int verbose );
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* timing.h */