Initial commit for the firmware. Used the 20090306_ela version as baseline.

It is identical to the popular 20081211, with the doob addition (20090301), a
linux client, and two additional commands for LF analysis. Let me know if
you find issues here!

armsrc/LCD.c

@@ -0,0 +1,123 @@
+#include <proxmark3.h>
+#include "apps.h"
+#include "LCD.h"
+
+void LCDSend(unsigned int data)
+{
+	// 9th bit set for data, clear for command
+	while ((SPI_STATUS & SPI_STATUS_TX_EMPTY) == 0);	// wait for the transfer to complete
+	// For clarity's sake we pass data with 9th bit clear and commands with 9th
+	// bit set since they're implemented as defines, se we need to invert bit
+	SPI_TX_DATA = data^0x100;							// Send the data/command
+}
+
+void LCDSetXY(unsigned char x, unsigned char y)
+{
+	LCDSend(PPASET);			// page start/end ram
+	LCDSend(y);					// Start Page to display to
+	LCDSend(131);				// End Page to display to
+
+	LCDSend(PCASET);			// column start/end ram
+	LCDSend(x);					// Start Column to display to
+	LCDSend(131);				// End Column to display to
+}
+
+void LCDSetPixel(unsigned char x, unsigned char y, unsigned char color)
+{
+	LCDSetXY(x,y);				// Set position
+	LCDSend(PRAMWR);			// Now write the pixel to the display
+	LCDSend(color);				// Write the data in the specified Color
+}
+
+void LCDFill (unsigned char xs,unsigned char ys,unsigned char width,unsigned char height, unsigned char color)
+{
+    unsigned char i,j;
+
+    for (i=0;i < height;i++)	// Number of horizontal lines
+    {
+		LCDSetXY(xs,ys+i);		// Goto start of fill area (Top Left)
+		LCDSend(PRAMWR);		// Write to display
+
+		for (j=0;j < width;j++)	// pixels per line
+			LCDSend(color);
+    }
+}
+
+void LCDString (char *lcd_string, const char *font_style,unsigned char x, unsigned char y, unsigned char fcolor, unsigned char bcolor)
+{
+	unsigned int  i;
+	unsigned char mask=0, px, py, xme, yme, offset;
+	const char *data;
+
+	data = font_style;			// point to the start of the font table
+
+	xme = *data;				// get font x width
+	data++;
+	yme = *data;				// get font y length
+	data++;
+	offset = *data;				// get data bytes per font
+
+	do
+	{
+		// point to data in table to be loaded
+		data =  (font_style + offset) + (offset * (int)(*lcd_string - 32));
+
+		for (i=0;i < yme;i++) {
+			mask |=0x80;
+
+			for (px=x; px < (x + xme); px++) {
+				py= y + i;
+
+				if (*data & mask)	LCDSetPixel (px,py,fcolor);
+				else				LCDSetPixel (px,py,bcolor);
+
+				mask>>=1;
+			}
+			data++;
+		}
+		x+=xme;
+
+		lcd_string++;						// next character in string
+
+	} while(*lcd_string !='\0');			// keep spitting chars out until end of string
+}
+
+void LCDReset(void)
+{
+	LED_A_ON();
+	SetupSpi(SPI_LCD_MODE);
+	LCD_RESET_LOW();
+	SpinDelay(100);
+
+	LCD_RESET_HIGH();
+	SpinDelay(100);
+	LED_A_OFF();
+}
+
+void LCDInit(void)
+{
+	int i;
+
+	LCDReset();
+
+	LCDSend(PSWRESET);			// software reset
+	SpinDelay(100);
+	LCDSend(PSLEEPOUT);			// exit sleep mode
+	LCDSend(PBSTRON);			// booster on
+	LCDSend(PDISPON);			// display on
+	LCDSend(PNORON);			// normal on
+	LCDSend(PMADCTL);			// rotate display 180 deg
+	LCDSend(0xC0);
+
+	LCDSend(PCOLMOD);			// color mode
+	LCDSend(0x02);				// 8bpp color mode
+
+    LCDSend(PSETCON);			// set contrast
+    LCDSend(0xDC);
+    
+	// clear display
+    LCDSetXY(0,0);
+	LCDSend(PRAMWR);			// Write to display
+	i=LCD_XRES*LCD_YRES;
+	while(i--) LCDSend(WHITE);
+}