mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2025-08-19 21:03:48 -07:00
@marshmellows last LF changes.
- wipe a t55x7 tag - stable demods -
This commit is contained in:
iceman1001
parent
57c7b44be5
commit
6426f6ba86
9 changed files with 411 additions and 284 deletions
|
|
@ -1065,7 +1065,7 @@ void CmdIOdemodFSK(int findone, int *high, int *low, int ledcontrol)
|
|||
#define WRITE_GAP 20*8 // was 160 // SPEC: 1*8 to 20*8 - typ 10*8 (or 10fc)
|
||||
#define WRITE_0 16*8 // was 144 // SPEC: 16*8 to 32*8 - typ 24*8 (or 24fc)
|
||||
#define WRITE_1 50*8 // was 400 // SPEC: 48*8 to 64*8 - typ 56*8 (or 56fc) 432 for T55x7; 448 for E5550
|
||||
#define READ_GAP 52*8
|
||||
#define READ_GAP 15*8
|
||||
|
||||
// VALUES TAKEN FROM EM4x function: SendForward
|
||||
// START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle)
|
||||
|
|
@ -1183,7 +1183,7 @@ void T55xxWriteBlock(uint32_t Data, uint8_t Block, uint32_t Pwd, uint8_t arg) {
|
|||
cmd_send(CMD_ACK,0,0,0,0,0);
|
||||
}
|
||||
|
||||
// Read one card block in page 0
|
||||
// Read one card block in page [page]
|
||||
void T55xxReadBlock(uint16_t arg0, uint8_t Block, uint32_t Pwd) {
|
||||
LED_A_ON();
|
||||
bool PwdMode = arg0 & 0x1;
|
||||
|
|
@ -1463,6 +1463,15 @@ uint8_t * fwd_write_ptr; //forwardlink bit pointer
|
|||
// prepares command bits
|
||||
// see EM4469 spec
|
||||
//====================================================================
|
||||
//--------------------------------------------------------------------
|
||||
// VALUES TAKEN FROM EM4x function: SendForward
|
||||
// START_GAP = 440; (55*8) cycles at 125Khz (8us = 1cycle)
|
||||
// WRITE_GAP = 128; (16*8)
|
||||
// WRITE_1 = 256 32*8; (32*8)
|
||||
|
||||
// These timings work for 4469/4269/4305 (with the 55*8 above)
|
||||
// WRITE_0 = 23*8 , 9*8 SpinDelayUs(23*8);
|
||||
|
||||
uint8_t Prepare_Cmd( uint8_t cmd ) {
|
||||
|
||||
*forward_ptr++ = 0; //start bit
|
||||
|
|
|
|||
|
|
@ -254,7 +254,8 @@ uint32_t SnoopLF() {
|
|||
**/
|
||||
void doT55x7Acquisition(size_t sample_size) {
|
||||
|
||||
#define T55xx_READ_UPPER_THRESHOLD 128+40 // 40 grph
|
||||
#define T55xx_READ_UPPER_THRESHOLD 128+60 // 60 grph
|
||||
#define T55xx_READ_LOWER_THRESHOLD 128-60 // -60 grph
|
||||
#define T55xx_READ_TOL 5
|
||||
|
||||
uint8_t *dest = BigBuf_get_addr();
|
||||
|
|
@ -266,8 +267,9 @@ void doT55x7Acquisition(size_t sample_size) {
|
|||
uint16_t i = 0;
|
||||
bool startFound = false;
|
||||
bool highFound = false;
|
||||
bool lowFound = false;
|
||||
uint8_t curSample = 0;
|
||||
uint8_t firstSample = 0;
|
||||
uint8_t lastSample = 0;
|
||||
uint16_t skipCnt = 0;
|
||||
while(!BUTTON_PRESS() && !usb_poll_validate_length() && skipCnt<1000) {
|
||||
WDT_HIT();
|
||||
|
|
@ -281,19 +283,29 @@ void doT55x7Acquisition(size_t sample_size) {
|
|||
|
||||
// skip until the first high sample above threshold
|
||||
if (!startFound && curSample > T55xx_READ_UPPER_THRESHOLD) {
|
||||
if (curSample > firstSample)
|
||||
firstSample = curSample;
|
||||
//if (curSample > lastSample)
|
||||
// lastSample = curSample;
|
||||
highFound = true;
|
||||
} else if (!highFound) {
|
||||
skipCnt++;
|
||||
continue;
|
||||
}
|
||||
// skip until the first Low sample below threshold
|
||||
if (!startFound && curSample < T55xx_READ_LOWER_THRESHOLD) {
|
||||
//if (curSample > lastSample)
|
||||
lastSample = curSample;
|
||||
lowFound = true;
|
||||
} else if (!lowFound) {
|
||||
skipCnt++;
|
||||
continue;
|
||||
}
|
||||
|
||||
|
||||
// skip until first high samples begin to change
|
||||
if (startFound || curSample < firstSample-T55xx_READ_TOL){
|
||||
if (startFound || curSample > T55xx_READ_LOWER_THRESHOLD+T55xx_READ_TOL){
|
||||
// if just found start - recover last sample
|
||||
if (!startFound) {
|
||||
dest[i++] = firstSample;
|
||||
dest[i++] = lastSample;
|
||||
startFound = true;
|
||||
}
|
||||
// collect samples
|
||||
|
|
|
|||
|
|
@ -1495,6 +1495,10 @@ int CmdFDXBdemodBI(const char *Cmd){
|
|||
if (g_debugMode) PrintAndLog("Error FDXBDemod , no startmarker found :: %d",preambleIndex);
|
||||
return 0;
|
||||
}
|
||||
if (size != 128) {
|
||||
if (g_debugMode) PrintAndLog("Error incorrect data length found");
|
||||
return 0;
|
||||
}
|
||||
|
||||
setDemodBuf(BitStream, 128, preambleIndex);
|
||||
|
||||
|
|
@ -1564,6 +1568,9 @@ int PSKDemod(const char *Cmd, bool verbose)
|
|||
//invalid carrier
|
||||
return 0;
|
||||
}
|
||||
if (g_debugMode){
|
||||
PrintAndLog("Carrier: rf/%d",carrier);
|
||||
}
|
||||
int errCnt=0;
|
||||
errCnt = pskRawDemod(BitStream, &BitLen, &clk, &invert);
|
||||
if (errCnt > maxErr){
|
||||
|
|
@ -1605,7 +1612,7 @@ int CmdIndalaDecode(const char *Cmd)
|
|||
uint8_t invert=0;
|
||||
size_t size = DemodBufferLen;
|
||||
size_t startIdx = indala26decode(DemodBuffer, &size, &invert);
|
||||
if (startIdx < 1) {
|
||||
if (startIdx < 1 || size > 224) {
|
||||
if (g_debugMode==1)
|
||||
PrintAndLog("Error2: %d",ans);
|
||||
return -1;
|
||||
|
|
@ -1699,7 +1706,7 @@ int NRZrawDemod(const char *Cmd, bool verbose)
|
|||
size_t BitLen = getFromGraphBuf(BitStream);
|
||||
if (BitLen==0) return 0;
|
||||
int errCnt=0;
|
||||
errCnt = nrzRawDemod(BitStream, &BitLen, &clk, &invert, maxErr);
|
||||
errCnt = nrzRawDemod(BitStream, &BitLen, &clk, &invert);
|
||||
if (errCnt > maxErr){
|
||||
if (g_debugMode) PrintAndLog("Too many errors found, clk: %d, invert: %d, numbits: %d, errCnt: %d",clk,invert,BitLen,errCnt);
|
||||
return 0;
|
||||
|
|
|
|||
|
|
@ -294,9 +294,12 @@ int CmdIndalaDemod(const char *Cmd)
|
|||
int rawbit = 0;
|
||||
int worst = 0, worstPos = 0;
|
||||
// PrintAndLog("Expecting a bit less than %d raw bits", GraphTraceLen / 32);
|
||||
|
||||
// loop through raw signal - since we know it is psk1 rf/32 fc/2 skip every other value (+=2)
|
||||
for (i = 0; i < GraphTraceLen-1; i += 2) {
|
||||
count += 1;
|
||||
if ((GraphBuffer[i] > GraphBuffer[i + 1]) && (state != 1)) {
|
||||
// appears redundant - marshmellow
|
||||
if (state == 0) {
|
||||
for (j = 0; j < count - 8; j += 16) {
|
||||
rawbits[rawbit++] = 0;
|
||||
|
|
@ -309,6 +312,7 @@ int CmdIndalaDemod(const char *Cmd)
|
|||
state = 1;
|
||||
count = 0;
|
||||
} else if ((GraphBuffer[i] < GraphBuffer[i + 1]) && (state != 0)) {
|
||||
//appears redundant
|
||||
if (state == 1) {
|
||||
for (j = 0; j < count - 8; j += 16) {
|
||||
rawbits[rawbit++] = 1;
|
||||
|
|
@ -1098,13 +1102,6 @@ int CmdLFfind(const char *Cmd)
|
|||
return 1;
|
||||
}
|
||||
|
||||
//add psk and indala
|
||||
ans=CmdIndalaDecode("");
|
||||
if (ans>0) {
|
||||
PrintAndLog("\nValid Indala ID Found!");
|
||||
return 1;
|
||||
}
|
||||
|
||||
ans=CmdAskEM410xDemod("");
|
||||
if (ans>0) {
|
||||
PrintAndLog("\nValid EM410x ID Found!");
|
||||
|
|
@ -1135,6 +1132,12 @@ int CmdLFfind(const char *Cmd)
|
|||
return 1;
|
||||
}
|
||||
|
||||
ans=CmdIndalaDecode("");
|
||||
if (ans>0) {
|
||||
PrintAndLog("\nValid Indala ID Found!");
|
||||
return 1;
|
||||
}
|
||||
|
||||
ans=CmdPSKNexWatch("");
|
||||
if (ans>0) {
|
||||
PrintAndLog("\nValid NexWatch ID Found!");
|
||||
|
|
|
|||
|
|
@ -33,7 +33,7 @@
|
|||
#define REGULAR_READ_MODE_BLOCK 0xFF
|
||||
|
||||
// Default configuration
|
||||
t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inverted = FALSE, .offset = 0x00, .block0 = 0x00};
|
||||
t55xx_conf_block_t config = { .modulation = DEMOD_ASK, .inverted = FALSE, .offset = 0x00, .block0 = 0x00, .Q5 = FALSE };
|
||||
|
||||
t55xx_conf_block_t Get_t55xx_Config(){
|
||||
return config;
|
||||
|
|
@ -43,13 +43,14 @@ void Set_t55xx_Config(t55xx_conf_block_t conf){
|
|||
}
|
||||
|
||||
int usage_t55xx_config(){
|
||||
PrintAndLog("Usage: lf t55xx config [d <demodulation>] [i 1] [o <offset>]");
|
||||
PrintAndLog("Usage: lf t55xx config [d <demodulation>] [i 1] [o <offset>] [Q5]");
|
||||
PrintAndLog("Options:");
|
||||
PrintAndLog(" h This help");
|
||||
PrintAndLog(" b <8|16|32|40|50|64|100|128> Set bitrate");
|
||||
PrintAndLog(" d <FSK|FSK1|FSK1a|FSK2|FSK2a|ASK|PSK1|PSK2|NRZ|BI|BIa> Set demodulation FSK / ASK / PSK / NRZ / Biphase / Biphase A");
|
||||
PrintAndLog(" i [1] Invert data signal, defaults to normal");
|
||||
PrintAndLog(" o [offset] Set offset, where data should start decode in bitstream");
|
||||
PrintAndLog(" Q5 Set as Q5(T5555) chip instead of T55x7");
|
||||
PrintAndLog("");
|
||||
PrintAndLog("Examples:");
|
||||
PrintAndLog(" lf t55xx config d FSK - FSK demodulation");
|
||||
|
|
@ -149,16 +150,24 @@ int usage_t55xx_wakup(){
|
|||
|
||||
static int CmdHelp(const char *Cmd);
|
||||
|
||||
void printT5xxHeader(uint8_t page){
|
||||
PrintAndLog("Reading Page %d:", page);
|
||||
PrintAndLog("blk | hex data | binary");
|
||||
PrintAndLog("----+----------+---------------------------------");
|
||||
}
|
||||
|
||||
int CmdT55xxSetConfig(const char *Cmd) {
|
||||
|
||||
uint8_t offset = 0;
|
||||
bool errors = FALSE;
|
||||
uint8_t cmdp = 0;
|
||||
char modulation[5] = {0x00};
|
||||
char tmp = 0x00;
|
||||
uint8_t bitRate = 0;
|
||||
uint8_t rates[9] = {8,16,32,40,50,64,100,128,0};
|
||||
while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {
|
||||
uint8_t cmdp = 0;
|
||||
config.Q5 = FALSE;
|
||||
bool errors = FALSE;
|
||||
while(param_getchar(Cmd, cmdp) != 0x00 && !errors)
|
||||
{
|
||||
tmp = param_getchar(Cmd, cmdp);
|
||||
switch(tmp)
|
||||
{
|
||||
|
|
@ -228,6 +237,11 @@ int CmdT55xxSetConfig(const char *Cmd) {
|
|||
config.offset = offset;
|
||||
cmdp+=2;
|
||||
break;
|
||||
case 'Q':
|
||||
case 'q':
|
||||
config.Q5 = TRUE;
|
||||
cmdp++;
|
||||
break;
|
||||
default:
|
||||
PrintAndLog("Unknown parameter '%c'", param_getchar(Cmd, cmdp));
|
||||
errors = TRUE;
|
||||
|
|
@ -270,7 +284,7 @@ int T55xxReadBlock(uint8_t block, bool page1, bool usepwd, bool override, uint32
|
|||
if (!DecodeT55xxBlock()) return 0;
|
||||
|
||||
char blk[10]={0};
|
||||
sprintf(blk,"%d", block);
|
||||
sprintf(blk,"%02d", block);
|
||||
printT55xxBlock(blk);
|
||||
return 1;
|
||||
}
|
||||
|
|
@ -320,8 +334,8 @@ int CmdT55xxReadBlock(const char *Cmd) {
|
|||
PrintAndLog("Block must be between 0 and 7");
|
||||
return 0;
|
||||
}
|
||||
PrintAndLog("Reading Page %d:", page1);
|
||||
PrintAndLog("blk | hex data | binary");
|
||||
|
||||
printT5xxHeader(page1);
|
||||
return T55xxReadBlock(block, page1, usepwd, override, password);
|
||||
}
|
||||
|
||||
|
|
@ -349,16 +363,20 @@ bool DecodeT55xxBlock(){
|
|||
ans = FSKrawDemod(cmdStr, FALSE);
|
||||
break;
|
||||
case DEMOD_ASK:
|
||||
snprintf(cmdStr, sizeof(buf),"%d %d 0", bitRate[config.bitrate], config.inverted );
|
||||
snprintf(cmdStr, sizeof(buf),"%d %d 1", bitRate[config.bitrate], config.inverted );
|
||||
ans = ASKDemod(cmdStr, FALSE, FALSE, 1);
|
||||
break;
|
||||
case DEMOD_PSK1:
|
||||
snprintf(cmdStr, sizeof(buf),"%d %d 0", bitRate[config.bitrate], config.inverted );
|
||||
// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)
|
||||
CmdLtrim("160");
|
||||
snprintf(cmdStr, sizeof(buf),"%d %d 6", bitRate[config.bitrate], config.inverted );
|
||||
ans = PSKDemod(cmdStr, FALSE);
|
||||
break;
|
||||
case DEMOD_PSK2: //inverted won't affect this
|
||||
case DEMOD_PSK3: //not fully implemented
|
||||
snprintf(cmdStr, sizeof(buf),"%d 0 1", bitRate[config.bitrate] );
|
||||
// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)
|
||||
CmdLtrim("160");
|
||||
snprintf(cmdStr, sizeof(buf),"%d 0 6", bitRate[config.bitrate] );
|
||||
ans = PSKDemod(cmdStr, FALSE);
|
||||
psk1TOpsk2(DemodBuffer, DemodBufferLen);
|
||||
break;
|
||||
|
|
@ -368,7 +386,7 @@ bool DecodeT55xxBlock(){
|
|||
break;
|
||||
case DEMOD_BI:
|
||||
case DEMOD_BIa:
|
||||
snprintf(cmdStr, sizeof(buf),"0 %d %d 0", bitRate[config.bitrate], config.inverted );
|
||||
snprintf(cmdStr, sizeof(buf),"0 %d %d 1", bitRate[config.bitrate], config.inverted );
|
||||
ans = ASKbiphaseDemod(cmdStr, FALSE);
|
||||
break;
|
||||
default:
|
||||
|
|
@ -379,15 +397,15 @@ bool DecodeT55xxBlock(){
|
|||
|
||||
int CmdT55xxDetect(const char *Cmd){
|
||||
|
||||
bool override = false;
|
||||
//bool override = false;
|
||||
//bool pwdmode = false;
|
||||
|
||||
uint32_t password = 0; //default to blank Block 7
|
||||
bool usepwd = ( strlen(Cmd) > 0);
|
||||
if ( usepwd ){
|
||||
password = param_get32ex(Cmd, 0, 0, 16);
|
||||
if (param_getchar(Cmd, 1) =='o' )
|
||||
override = true;
|
||||
// if (param_getchar(Cmd, 1) =='o' )
|
||||
// override = true;
|
||||
}
|
||||
|
||||
char cmdp = param_getchar(Cmd, 0);
|
||||
|
|
@ -395,7 +413,7 @@ int CmdT55xxDetect(const char *Cmd){
|
|||
|
||||
if (strlen(Cmd)==0) {
|
||||
password = param_get32ex(Cmd, 0, 0, 16);
|
||||
if (param_getchar(Cmd, 1) =='o' ) override = true;
|
||||
//if (param_getchar(Cmd, 1) =='o' ) override = true;
|
||||
}
|
||||
|
||||
if ( !AquireData(T55x7_PAGE0, T55x7_CONFIGURATION_BLOCK, usepwd, password) )
|
||||
|
|
@ -414,9 +432,10 @@ bool tryDetectModulation(){
|
|||
int bitRate=0;
|
||||
uint8_t fc1 = 0, fc2 = 0, clk=0;
|
||||
save_restoreGB(1);
|
||||
|
||||
if (GetFskClock("", FALSE, FALSE)){
|
||||
fskClocks(&fc1, &fc2, &clk, FALSE);
|
||||
if ( FSKrawDemod("0 0", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate)){
|
||||
if ( FSKrawDemod("0 0", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)){
|
||||
tests[hits].modulation = DEMOD_FSK;
|
||||
if (fc1==8 && fc2 == 5)
|
||||
tests[hits].modulation = DEMOD_FSK1a;
|
||||
|
|
@ -427,7 +446,7 @@ bool tryDetectModulation(){
|
|||
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
|
||||
++hits;
|
||||
}
|
||||
if ( FSKrawDemod("0 1", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate)) {
|
||||
if ( FSKrawDemod("0 1", FALSE) && test(DEMOD_FSK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
|
||||
tests[hits].modulation = DEMOD_FSK;
|
||||
if (fc1 == 8 && fc2 == 5)
|
||||
tests[hits].modulation = DEMOD_FSK1;
|
||||
|
|
@ -442,28 +461,28 @@ bool tryDetectModulation(){
|
|||
} else {
|
||||
clk = GetAskClock("", FALSE, FALSE);
|
||||
if (clk>0) {
|
||||
if ( ASKDemod("0 0 0", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate)) {
|
||||
if ( ASKDemod("0 0 1", TRUE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
|
||||
tests[hits].modulation = DEMOD_ASK;
|
||||
tests[hits].bitrate = bitRate;
|
||||
tests[hits].inverted = FALSE;
|
||||
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
|
||||
++hits;
|
||||
}
|
||||
if ( ASKDemod("0 1 0", FALSE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate)) {
|
||||
if ( ASKDemod("0 1 1", TRUE, FALSE, 1) && test(DEMOD_ASK, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
|
||||
tests[hits].modulation = DEMOD_ASK;
|
||||
tests[hits].bitrate = bitRate;
|
||||
tests[hits].inverted = TRUE;
|
||||
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
|
||||
++hits;
|
||||
}
|
||||
if ( ASKbiphaseDemod("0 0 0 0", FALSE) && test(DEMOD_BI, &tests[hits].offset, &bitRate) ) {
|
||||
if ( ASKbiphaseDemod("0 0 0 2", FALSE) && test(DEMOD_BI, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) {
|
||||
tests[hits].modulation = DEMOD_BI;
|
||||
tests[hits].bitrate = bitRate;
|
||||
tests[hits].inverted = FALSE;
|
||||
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
|
||||
++hits;
|
||||
}
|
||||
if ( ASKbiphaseDemod("0 0 1 0", FALSE) && test(DEMOD_BIa, &tests[hits].offset, &bitRate) ) {
|
||||
if ( ASKbiphaseDemod("0 0 1 2", FALSE) && test(DEMOD_BIa, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5) ) {
|
||||
tests[hits].modulation = DEMOD_BIa;
|
||||
tests[hits].bitrate = bitRate;
|
||||
tests[hits].inverted = TRUE;
|
||||
|
|
@ -475,7 +494,7 @@ bool tryDetectModulation(){
|
|||
save_restoreGB(0);
|
||||
clk = GetNrzClock("", FALSE, FALSE);
|
||||
if (clk>0) {
|
||||
if ( NRZrawDemod("0 0 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset, &bitRate)) {
|
||||
if ( NRZrawDemod("0 0 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
|
||||
tests[hits].modulation = DEMOD_NRZ;
|
||||
tests[hits].bitrate = bitRate;
|
||||
tests[hits].inverted = FALSE;
|
||||
|
|
@ -483,7 +502,7 @@ bool tryDetectModulation(){
|
|||
++hits;
|
||||
}
|
||||
|
||||
if ( NRZrawDemod("0 1 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset, &bitRate)) {
|
||||
if ( NRZrawDemod("0 1 1", FALSE) && test(DEMOD_NRZ, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
|
||||
tests[hits].modulation = DEMOD_NRZ;
|
||||
tests[hits].bitrate = bitRate;
|
||||
tests[hits].inverted = TRUE;
|
||||
|
|
@ -494,16 +513,18 @@ bool tryDetectModulation(){
|
|||
|
||||
//undo trim from nrz
|
||||
save_restoreGB(0);
|
||||
// skip first 160 samples to allow antenna to settle in (psk gets inverted occasionally otherwise)
|
||||
CmdLtrim("160");
|
||||
clk = GetPskClock("", FALSE, FALSE);
|
||||
if (clk>0) {
|
||||
if ( PSKDemod("0 0 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate)) {
|
||||
if ( PSKDemod("0 0 6", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
|
||||
tests[hits].modulation = DEMOD_PSK1;
|
||||
tests[hits].bitrate = bitRate;
|
||||
tests[hits].inverted = FALSE;
|
||||
tests[hits].block0 = PackBits(tests[hits].offset, 32, DemodBuffer);
|
||||
++hits;
|
||||
}
|
||||
if ( PSKDemod("0 1 1", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate)) {
|
||||
if ( PSKDemod("0 1 6", FALSE) && test(DEMOD_PSK1, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)) {
|
||||
tests[hits].modulation = DEMOD_PSK1;
|
||||
tests[hits].bitrate = bitRate;
|
||||
tests[hits].inverted = TRUE;
|
||||
|
|
@ -511,9 +532,9 @@ bool tryDetectModulation(){
|
|||
++hits;
|
||||
}
|
||||
// PSK2 - needs a call to psk1TOpsk2.
|
||||
if ( PSKDemod("0 0 1", FALSE)) {
|
||||
if ( PSKDemod("0 0 6", FALSE)) {
|
||||
psk1TOpsk2(DemodBuffer, DemodBufferLen);
|
||||
if (test(DEMOD_PSK2, &tests[hits].offset, &bitRate)){
|
||||
if (test(DEMOD_PSK2, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)){
|
||||
tests[hits].modulation = DEMOD_PSK2;
|
||||
tests[hits].bitrate = bitRate;
|
||||
tests[hits].inverted = FALSE;
|
||||
|
|
@ -522,9 +543,9 @@ bool tryDetectModulation(){
|
|||
}
|
||||
} // inverse waves does not affect this demod
|
||||
// PSK3 - needs a call to psk1TOpsk2.
|
||||
if ( PSKDemod("0 0 1", FALSE)) {
|
||||
if ( PSKDemod("0 0 6", FALSE)) {
|
||||
psk1TOpsk2(DemodBuffer, DemodBufferLen);
|
||||
if (test(DEMOD_PSK3, &tests[hits].offset, &bitRate)){
|
||||
if (test(DEMOD_PSK3, &tests[hits].offset, &bitRate, clk, &tests[hits].Q5)){
|
||||
tests[hits].modulation = DEMOD_PSK3;
|
||||
tests[hits].bitrate = bitRate;
|
||||
tests[hits].inverted = FALSE;
|
||||
|
|
@ -534,6 +555,7 @@ bool tryDetectModulation(){
|
|||
} // inverse waves does not affect this demod
|
||||
}
|
||||
}
|
||||
save_restoreGB(0);
|
||||
if ( hits == 1) {
|
||||
config.modulation = tests[0].modulation;
|
||||
config.bitrate = tests[0].bitrate;
|
||||
|
|
@ -586,37 +608,28 @@ bool testModulation(uint8_t mode, uint8_t modread){
|
|||
return FALSE;
|
||||
}
|
||||
|
||||
bool testBitRate(uint8_t readRate, uint8_t mod){
|
||||
uint8_t expected[8] = {8, 16, 32, 40, 50, 64, 100, 128};
|
||||
uint8_t detRate = 0;
|
||||
switch( mod ){
|
||||
bool testQ5Modulation(uint8_t mode, uint8_t modread){
|
||||
switch( mode ){
|
||||
case DEMOD_FSK:
|
||||
case DEMOD_FSK1:
|
||||
case DEMOD_FSK1a:
|
||||
case DEMOD_FSK2:
|
||||
case DEMOD_FSK2a:
|
||||
detRate = GetFskClock("",FALSE, FALSE);
|
||||
if (expected[readRate] == detRate)
|
||||
return TRUE;
|
||||
if (modread >= 4 && modread <= 5) return TRUE;
|
||||
break;
|
||||
case DEMOD_ASK:
|
||||
case DEMOD_BI:
|
||||
case DEMOD_BIa:
|
||||
detRate = GetAskClock("",FALSE, FALSE);
|
||||
if (expected[readRate] == detRate)
|
||||
return TRUE;
|
||||
if (modread == 0) return TRUE;
|
||||
break;
|
||||
case DEMOD_PSK1:
|
||||
if (modread == 1) return TRUE;
|
||||
break;
|
||||
case DEMOD_PSK2:
|
||||
if (modread == 2) return TRUE;
|
||||
break;
|
||||
case DEMOD_PSK3:
|
||||
detRate = GetPskClock("",FALSE, FALSE);
|
||||
if (expected[readRate] == detRate)
|
||||
return TRUE;
|
||||
if (modread == 3) return TRUE;
|
||||
break;
|
||||
case DEMOD_NRZ:
|
||||
detRate = GetNrzClock("",FALSE, FALSE);
|
||||
if (expected[readRate] == detRate)
|
||||
return TRUE;
|
||||
if (modread == 7) return TRUE;
|
||||
break;
|
||||
case DEMOD_BI:
|
||||
if (modread == 6) return TRUE;
|
||||
break;
|
||||
default:
|
||||
return FALSE;
|
||||
|
|
@ -624,13 +637,60 @@ bool testBitRate(uint8_t readRate, uint8_t mod){
|
|||
return FALSE;
|
||||
}
|
||||
|
||||
bool test(uint8_t mode, uint8_t *offset, int *fndBitRate){
|
||||
bool testQ5(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk){
|
||||
|
||||
if ( DemodBufferLen < 64 ) return FALSE;
|
||||
uint8_t si = 0;
|
||||
for (uint8_t idx = 0; idx < 64; idx++){
|
||||
for (uint8_t idx = 28; idx < 64; idx++){
|
||||
si = idx;
|
||||
if ( PackBits(si, 32, DemodBuffer) == 0x00 ) continue;
|
||||
if ( PackBits(si, 28, DemodBuffer) == 0x00 ) continue;
|
||||
|
||||
uint8_t safer = PackBits(si, 4, DemodBuffer); si += 4; //master key
|
||||
uint8_t resv = PackBits(si, 8, DemodBuffer); si += 8;
|
||||
// 2nibble must be zeroed.
|
||||
if (safer != 0x6) continue;
|
||||
if ( resv > 0x00) continue;
|
||||
//uint8_t pageSel = PackBits(si, 1, DemodBuffer); si += 1;
|
||||
//uint8_t fastWrite = PackBits(si, 1, DemodBuffer); si += 1;
|
||||
si += 1+1;
|
||||
int bitRate = PackBits(si, 5, DemodBuffer)*2 + 2; si += 5; //bit rate
|
||||
if (bitRate > 128 || bitRate < 8) continue;
|
||||
|
||||
//uint8_t AOR = PackBits(si, 1, DemodBuffer); si += 1;
|
||||
//uint8_t PWD = PackBits(si, 1, DemodBuffer); si += 1;
|
||||
//uint8_t pskcr = PackBits(si, 2, DemodBuffer); si += 2; //could check psk cr
|
||||
//uint8_t inverse = PackBits(si, 1, DemodBuffer); si += 1;
|
||||
si += 1+1+2+1;
|
||||
uint8_t modread = PackBits(si, 3, DemodBuffer); si += 3;
|
||||
uint8_t maxBlk = PackBits(si, 3, DemodBuffer); si += 3;
|
||||
//uint8_t ST = PackBits(si, 1, DemodBuffer); si += 1;
|
||||
if (maxBlk == 0) continue;
|
||||
//test modulation
|
||||
if (!testQ5Modulation(mode, modread)) continue;
|
||||
if (bitRate != clk) continue;
|
||||
*fndBitRate = bitRate;
|
||||
*offset = idx;
|
||||
|
||||
return TRUE;
|
||||
}
|
||||
return FALSE;
|
||||
}
|
||||
|
||||
bool testBitRate(uint8_t readRate, uint8_t clk){
|
||||
uint8_t expected[] = {8, 16, 32, 40, 50, 64, 100, 128};
|
||||
if (expected[readRate] == clk)
|
||||
return true;
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5){
|
||||
|
||||
if ( DemodBufferLen < 64 ) return FALSE;
|
||||
uint8_t si = 0;
|
||||
for (uint8_t idx = 28; idx < 64; idx++){
|
||||
si = idx;
|
||||
if ( PackBits(si, 28, DemodBuffer) == 0x00 ) continue;
|
||||
|
||||
uint8_t safer = PackBits(si, 4, DemodBuffer); si += 4; //master key
|
||||
uint8_t resv = PackBits(si, 4, DemodBuffer); si += 4; //was 7 & +=7+3 //should be only 4 bits if extended mode
|
||||
|
|
@ -655,9 +715,14 @@ bool test(uint8_t mode, uint8_t *offset, int *fndBitRate){
|
|||
}
|
||||
//test modulation
|
||||
if (!testModulation(mode, modread)) continue;
|
||||
if (!testBitRate(bitRate, mode)) continue;
|
||||
if (!testBitRate(bitRate, clk)) continue;
|
||||
*fndBitRate = bitRate;
|
||||
*offset = idx;
|
||||
*Q5 = FALSE;
|
||||
return TRUE;
|
||||
}
|
||||
if (testQ5(mode, offset, fndBitRate, clk)) {
|
||||
*Q5 = TRUE;
|
||||
return TRUE;
|
||||
}
|
||||
return FALSE;
|
||||
|
|
@ -681,7 +746,8 @@ void printT55xxBlock(const char *blockNum){
|
|||
bits[i - config.offset] = DemodBuffer[i];
|
||||
|
||||
blockData = PackBits(0, 32, bits);
|
||||
PrintAndLog("%s | %08X | %s", blockNum, blockData, sprint_bin(bits,32));
|
||||
|
||||
PrintAndLog(" %s | %08X | %s", blockNum, blockData, sprint_bin(bits,32));
|
||||
}
|
||||
|
||||
int special(const char *Cmd) {
|
||||
|
|
@ -704,6 +770,7 @@ int special(const char *Cmd) {
|
|||
}
|
||||
|
||||
int printConfiguration( t55xx_conf_block_t b){
|
||||
PrintAndLog("Chip Type : %s", (b.Q5) ? "T5555(Q5)" : "T55x7");
|
||||
PrintAndLog("Modulation : %s", GetSelectedModulationStr(b.modulation) );
|
||||
PrintAndLog("Bit Rate : %s", GetBitRateStr(b.bitrate) );
|
||||
PrintAndLog("Inverted : %s", (b.inverted) ? "Yes" : "No" );
|
||||
|
|
@ -851,11 +918,11 @@ int CmdT55xxReadTrace(const char *Cmd) {
|
|||
else
|
||||
year += 2010;
|
||||
|
||||
if (config.Q5) PrintAndLog("*** Warning *** Info read off a Q5 will not work as expected");
|
||||
if ( acl != 0xE0 ) {
|
||||
PrintAndLog("The modulation is most likely wrong since the ACL is not 0xE0. ");
|
||||
return 0;
|
||||
}
|
||||
|
||||
PrintAndLog("");
|
||||
PrintAndLog("-- T55xx Trace Information ----------------------------------");
|
||||
PrintAndLog("-------------------------------------------------------------");
|
||||
|
|
@ -931,7 +998,7 @@ int CmdT55xxInfo(const char *Cmd){
|
|||
uint32_t fw = PackBits(si, 1, DemodBuffer); si += 1;
|
||||
uint32_t inv = PackBits(si, 1, DemodBuffer); si += 1;
|
||||
uint32_t por = PackBits(si, 1, DemodBuffer); si += 1;
|
||||
|
||||
if (config.Q5) PrintAndLog("*** Warning *** Config Info read off a Q5 will not display as expected");
|
||||
PrintAndLog("");
|
||||
PrintAndLog("-- T55xx Configuration & Tag Information --------------------");
|
||||
PrintAndLog("-------------------------------------------------------------");
|
||||
|
|
@ -971,16 +1038,14 @@ int CmdT55xxDump(const char *Cmd){
|
|||
override = true;
|
||||
}
|
||||
|
||||
PrintAndLog("Reading Page 0:");
|
||||
PrintAndLog("blk | hex data | binary");
|
||||
for ( uint8_t i = 0; i < 8; ++i){
|
||||
printT5xxHeader(0);
|
||||
for ( uint8_t i = 0; i < 8; ++i)
|
||||
T55xxReadBlock(i, 0, usepwd, override, password);
|
||||
}
|
||||
PrintAndLog("Reading Page 1:");
|
||||
PrintAndLog("blk | hex data | binary");
|
||||
for ( uint8_t i = 0; i < 4; i++){
|
||||
|
||||
printT5xxHeader(1);
|
||||
for ( uint8_t i = 0; i < 4; i++)
|
||||
T55xxReadBlock(i, 1, usepwd, override, password);
|
||||
}
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
|
@ -1203,6 +1268,26 @@ int CmdResetRead(const char *Cmd) {
|
|||
return 1;
|
||||
}
|
||||
|
||||
int CmdT55xxWipe(const char *Cmd) {
|
||||
char writeData[20] = {0};
|
||||
char *ptrData = writeData;
|
||||
uint8_t blk = 0;
|
||||
PrintAndLog("\nBeginning Wipe of a T55xx tag (assuming the tag is not password protected)\n");
|
||||
//try with the default password to reset block 0 (with a pwd should work even if pwd bit not set)
|
||||
snprintf(ptrData,sizeof(writeData),"b %d d 00088040 p 0", blk);
|
||||
if (!CmdT55xxWriteBlock(ptrData)){
|
||||
PrintAndLog("Error writing blk %d", blk);
|
||||
}
|
||||
blk = 1;
|
||||
for (; blk<8; blk++) {
|
||||
snprintf(ptrData,sizeof(writeData),"b %d d 0", blk);
|
||||
if (!CmdT55xxWriteBlock(ptrData)){
|
||||
PrintAndLog("Error writing blk %d", blk);
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static command_t CommandTable[] =
|
||||
{
|
||||
{"help", CmdHelp, 1, "This help"},
|
||||
|
|
@ -1211,11 +1296,12 @@ static command_t CommandTable[] =
|
|||
{"read", CmdT55xxReadBlock, 0, "b <block> p [password] [o] [1] -- Read T55xx block data. Optional [p password], [override], [page1]"},
|
||||
{"resetread",CmdResetRead, 0, "Send Reset Cmd then lf read the stream to attempt to identify the start of it (needs a demod and/or plot after)"},
|
||||
{"write", CmdT55xxWriteBlock,0, "b <block> d <data> p [password] [1] -- Write T55xx block data. Optional [p password], [page1]"},
|
||||
{"trace", CmdT55xxReadTrace, 0, "[1] Show T55xx traceability data (page 1/ blk 0-1)"},
|
||||
{"info", CmdT55xxInfo, 0, "[1] Show T55xx configuration data (page 0/ blk 0)"},
|
||||
{"trace", CmdT55xxReadTrace, 0, "[1] Show T55x7 traceability data (page 1/ blk 0-1)"},
|
||||
{"info", CmdT55xxInfo, 0, "[1] Show T55x7 configuration data (page 0/ blk 0)"},
|
||||
{"dump", CmdT55xxDump, 0, "[password] [o] Dump T55xx card block 0-7. Optional [password], [override]"},
|
||||
{"special", special, 0, "Show block changes with 64 different offsets"},
|
||||
{"wakeup", CmdT55xxWakeUp, 0, "Send AOR wakeup command"},
|
||||
{"wipe", CmdT55xxWipe, 0, "Wipe a T55xx tag and set defaults (will destroy any data on tag)"},
|
||||
{NULL, NULL, 0, NULL}
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -59,6 +59,7 @@ typedef struct {
|
|||
RF_100 = 0x06,
|
||||
RF_128 = 0x07,
|
||||
} bitrate;
|
||||
bool Q5;
|
||||
} t55xx_conf_block_t;
|
||||
t55xx_conf_block_t Get_t55xx_Config();
|
||||
void Set_t55xx_Config(t55xx_conf_block_t conf);
|
||||
|
|
@ -72,6 +73,7 @@ int CmdT55xxReadTrace(const char *Cmd);
|
|||
int CmdT55xxInfo(const char *Cmd);
|
||||
int CmdT55xxDetect(const char *Cmd);
|
||||
int CmdResetRead(const char *Cmd);
|
||||
int CmdT55xxWipe(const char *Cmd);
|
||||
|
||||
char * GetBitRateStr(uint32_t id);
|
||||
char * GetSaferStr(uint32_t id);
|
||||
|
|
@ -79,12 +81,13 @@ char * GetModulationStr( uint32_t id);
|
|||
char * GetModelStrFromCID(uint32_t cid);
|
||||
char * GetSelectedModulationStr( uint8_t id);
|
||||
uint32_t PackBits(uint8_t start, uint8_t len, uint8_t *bitstream);
|
||||
void printT5xxHeader(uint8_t page);
|
||||
void printT55xxBlock(const char *demodStr);
|
||||
int printConfiguration( t55xx_conf_block_t b);
|
||||
|
||||
bool DecodeT55xxBlock();
|
||||
bool tryDetectModulation();
|
||||
bool test(uint8_t mode, uint8_t *offset, int *fndBitRate);
|
||||
bool test(uint8_t mode, uint8_t *offset, int *fndBitRate, uint8_t clk, bool *Q5);
|
||||
int special(const char *Cmd);
|
||||
int AquireData( uint8_t page, uint8_t block, bool pwdmode, uint32_t password );
|
||||
|
||||
|
|
|
|||
|
|
@ -23,8 +23,8 @@ int usage_lf_viking_clone(void){
|
|||
//see ASKDemod for what args are accepted
|
||||
int CmdVikingDemod(const char *Cmd)
|
||||
{
|
||||
CmdLFRead("s");
|
||||
getSamples("30000",false);
|
||||
//CmdLFRead("s");
|
||||
//getSamples("30000",false);
|
||||
|
||||
if (!ASKDemod(Cmd, false, false, 1)) {
|
||||
if (g_debugMode) PrintAndLog("ASKDemod failed");
|
||||
|
|
@ -34,7 +34,7 @@ int CmdVikingDemod(const char *Cmd)
|
|||
|
||||
int ans = VikingDemod_AM(DemodBuffer, &size);
|
||||
if (ans < 0) {
|
||||
if (g_debugMode) PrintAndLog("Error Viking_Demod");
|
||||
if (g_debugMode) PrintAndLog("Error Viking_Demod %d", ans);
|
||||
return 0;
|
||||
}
|
||||
//got a good demod
|
||||
|
|
|
|||
387
common/lfdemod.c
387
common/lfdemod.c
|
|
@ -11,6 +11,20 @@
|
|||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
#include "lfdemod.h"
|
||||
#include "common.h"
|
||||
|
||||
/* //un_comment to allow debug print calls when used not on device
|
||||
void dummy(char *fmt, ...){}
|
||||
|
||||
#ifndef ON_DEVICE
|
||||
#include "ui.h"
|
||||
#define prnt PrintAndLog
|
||||
#else
|
||||
|
||||
#define prnt dummy
|
||||
#endif
|
||||
*/
|
||||
|
||||
uint8_t justNoise(uint8_t *BitStream, size_t size)
|
||||
{
|
||||
static const uint8_t THRESHOLD = 123;
|
||||
|
|
@ -385,15 +399,15 @@ size_t fsk_wave_demod(uint8_t * dest, size_t size, uint8_t fchigh, uint8_t fclow
|
|||
// sync to first lo-hi transition, and threshold
|
||||
|
||||
// Need to threshold first sample
|
||||
|
||||
if(dest[0] < threshold_value) dest[0] = 0;
|
||||
// skip 160 samples to allow antenna/samples to settle
|
||||
if(dest[160] < threshold_value) dest[0] = 0;
|
||||
else dest[0] = 1;
|
||||
|
||||
size_t numBits = 0;
|
||||
// count cycles between consecutive lo-hi transitions, there should be either 8 (fc/8)
|
||||
// or 10 (fc/10) cycles but in practice due to noise etc we may end up with with anywhere
|
||||
// between 7 to 11 cycles so fuzz it by treat anything <9 as 8 and anything else as 10
|
||||
for(idx = 1; idx < size; idx++) {
|
||||
for(idx = 161; idx < size-20; idx++) {
|
||||
// threshold current value
|
||||
|
||||
if (dest[idx] < threshold_value) dest[idx] = 0;
|
||||
|
|
@ -404,15 +418,15 @@ size_t fsk_wave_demod(uint8_t * dest, size_t size, uint8_t fchigh, uint8_t fclow
|
|||
preLastSample = LastSample;
|
||||
LastSample = currSample;
|
||||
currSample = idx-last_transition;
|
||||
if (currSample < (fclow-2)){ //0-5 = garbage noise
|
||||
if (currSample < (fclow-2)){ //0-5 = garbage noise (or 0-3)
|
||||
//do nothing with extra garbage
|
||||
} else if (currSample < (fchigh-1)) { //6-8 = 8 sample waves
|
||||
if (LastSample > (fchigh-2) && preLastSample < (fchigh-1)){
|
||||
dest[numBits-1]=1; //correct last 9 wave surrounded by 8 waves
|
||||
} else if (currSample < (fchigh-1)) { //6-8 = 8 sample waves or 3-6 = 5
|
||||
if (LastSample > (fchigh-2) && (preLastSample < (fchigh-1) || preLastSample == 0 )){
|
||||
dest[numBits-1]=1; //correct previous 9 wave surrounded by 8 waves
|
||||
}
|
||||
dest[numBits++]=1;
|
||||
|
||||
} else if (currSample > (fchigh+1) && !numBits) { //12 + and first bit = garbage
|
||||
} else if (currSample > (fchigh) && !numBits) { //12 + and first bit = garbage
|
||||
//do nothing with beginning garbage
|
||||
} else if (currSample == (fclow+1) && LastSample == (fclow-1)) { // had a 7 then a 9 should be two 8's
|
||||
dest[numBits++]=1;
|
||||
|
|
@ -439,19 +453,8 @@ size_t aggregate_bits(uint8_t *dest, size_t size, uint8_t rfLen,
|
|||
|
||||
//if lastval was 1, we have a 1->0 crossing
|
||||
if (dest[idx-1]==1) {
|
||||
if (!numBits && n < rfLen/fclow) {
|
||||
n=0;
|
||||
lastval = dest[idx];
|
||||
continue;
|
||||
}
|
||||
n = (n * fclow + rfLen/2) / rfLen;
|
||||
} else {// 0->1 crossing
|
||||
//test first bitsample too small
|
||||
if (!numBits && n < rfLen/fchigh) {
|
||||
n=0;
|
||||
lastval = dest[idx];
|
||||
continue;
|
||||
}
|
||||
n = (n * fchigh + rfLen/2) / rfLen;
|
||||
}
|
||||
if (n == 0) n = 1;
|
||||
|
|
@ -473,6 +476,7 @@ size_t aggregate_bits(uint8_t *dest, size_t size, uint8_t rfLen,
|
|||
}
|
||||
return numBits;
|
||||
}
|
||||
|
||||
//by marshmellow (from holiman's base)
|
||||
// full fsk demod from GraphBuffer wave to decoded 1s and 0s (no mandemod)
|
||||
int fskdemod(uint8_t *dest, size_t size, uint8_t rfLen, uint8_t invert, uint8_t fchigh, uint8_t fclow)
|
||||
|
|
@ -682,7 +686,7 @@ int AWIDdemodFSK(uint8_t *dest, size_t *size)
|
|||
}
|
||||
|
||||
// by marshmellow
|
||||
// FSK Demod then try to locate an Farpointe Data (pyramid) ID
|
||||
// FSK Demod then try to locate a Farpointe Data (pyramid) ID
|
||||
int PyramiddemodFSK(uint8_t *dest, size_t *size)
|
||||
{
|
||||
//make sure buffer has data
|
||||
|
|
@ -707,22 +711,21 @@ int PyramiddemodFSK(uint8_t *dest, size_t *size)
|
|||
// to detect a wave that has heavily clipped (clean) samples
|
||||
uint8_t DetectCleanAskWave(uint8_t dest[], size_t size, uint8_t high, uint8_t low)
|
||||
{
|
||||
uint16_t allPeaks=1;
|
||||
bool allArePeaks = true;
|
||||
uint16_t cntPeaks=0;
|
||||
size_t loopEnd = 512+60;
|
||||
size_t loopEnd = 512+160;
|
||||
if (loopEnd > size) loopEnd = size;
|
||||
for (size_t i=60; i<loopEnd; i++){
|
||||
for (size_t i=160; i<loopEnd; i++){
|
||||
if (dest[i]>low && dest[i]<high)
|
||||
allPeaks=0;
|
||||
allArePeaks = false;
|
||||
else
|
||||
cntPeaks++;
|
||||
}
|
||||
if (allPeaks == 0){
|
||||
if (cntPeaks > 300) return 1;
|
||||
if (!allArePeaks){
|
||||
if (cntPeaks > 300) return true;
|
||||
}
|
||||
return allPeaks;
|
||||
return allArePeaks;
|
||||
}
|
||||
|
||||
// by marshmellow
|
||||
// to help detect clocks on heavily clipped samples
|
||||
// based on count of low to low
|
||||
|
|
@ -730,7 +733,7 @@ int DetectStrongAskClock(uint8_t dest[], size_t size, uint8_t high, uint8_t low)
|
|||
{
|
||||
uint8_t fndClk[] = {8,16,32,40,50,64,128};
|
||||
size_t startwave;
|
||||
size_t i = 0;
|
||||
size_t i = 100;
|
||||
size_t minClk = 255;
|
||||
// get to first full low to prime loop and skip incomplete first pulse
|
||||
while ((dest[i] < high) && (i < size))
|
||||
|
|
@ -753,6 +756,7 @@ int DetectStrongAskClock(uint8_t dest[], size_t size, uint8_t high, uint8_t low)
|
|||
minClk = i - startwave;
|
||||
}
|
||||
// set clock
|
||||
//prnt("minClk: %d",minClk);
|
||||
for (uint8_t clkCnt = 0; clkCnt<7; clkCnt++) {
|
||||
if (minClk >= fndClk[clkCnt]-(fndClk[clkCnt]/8) && minClk <= fndClk[clkCnt]+1)
|
||||
return fndClk[clkCnt];
|
||||
|
|
@ -770,8 +774,8 @@ int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr)
|
|||
uint8_t clk[] = {255,8,16,32,40,50,64,100,128,255};
|
||||
uint8_t clkEnd = 9;
|
||||
uint8_t loopCnt = 255; //don't need to loop through entire array...
|
||||
if (size <= loopCnt) return -1; //not enough samples
|
||||
|
||||
if (size <= loopCnt+60) return -1; //not enough samples
|
||||
size -= 60; //sometimes there is a strange end wave - filter out this....
|
||||
//if we already have a valid clock
|
||||
uint8_t clockFnd=0;
|
||||
for (;i<clkEnd;++i)
|
||||
|
|
@ -838,7 +842,7 @@ int DetectASKClock(uint8_t dest[], size_t size, int *clock, int maxErr)
|
|||
}
|
||||
//if we found no errors then we can stop here and a low clock (common clocks)
|
||||
// this is correct one - return this clock
|
||||
//PrintAndLog("DEBUG: clk %d, err %d, ii %d, i %d",clk[clkCnt],errCnt,ii,i);
|
||||
//prnt("DEBUG: clk %d, err %d, ii %d, i %d",clk[clkCnt],errCnt,ii,i);
|
||||
if(errCnt==0 && clkCnt<7) {
|
||||
if (!clockFnd) *clock = clk[clkCnt];
|
||||
return ii;
|
||||
|
|
@ -874,7 +878,7 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
|
|||
uint8_t clk[]={255,16,32,40,50,64,100,128,255}; //255 is not a valid clock
|
||||
uint16_t loopCnt = 4096; //don't need to loop through entire array...
|
||||
if (size == 0) return 0;
|
||||
if (size<loopCnt) loopCnt = size;
|
||||
if (size<loopCnt) loopCnt = size-20;
|
||||
|
||||
//if we already have a valid clock quit
|
||||
size_t i=1;
|
||||
|
|
@ -888,17 +892,17 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
|
|||
uint16_t peaksdet[]={0,0,0,0,0,0,0,0,0};
|
||||
fc = countFC(dest, size, 0);
|
||||
if (fc!=2 && fc!=4 && fc!=8) return -1;
|
||||
//PrintAndLog("DEBUG: FC: %d",fc);
|
||||
//prnt("DEBUG: FC: %d",fc);
|
||||
|
||||
//find first full wave
|
||||
for (i=0; i<loopCnt; i++){
|
||||
for (i=160; i<loopCnt; i++){
|
||||
if (dest[i] < dest[i+1] && dest[i+1] >= dest[i+2]){
|
||||
if (waveStart == 0) {
|
||||
waveStart = i+1;
|
||||
//PrintAndLog("DEBUG: waveStart: %d",waveStart);
|
||||
//prnt("DEBUG: waveStart: %d",waveStart);
|
||||
} else {
|
||||
waveEnd = i+1;
|
||||
//PrintAndLog("DEBUG: waveEnd: %d",waveEnd);
|
||||
//prnt("DEBUG: waveEnd: %d",waveEnd);
|
||||
waveLenCnt = waveEnd-waveStart;
|
||||
if (waveLenCnt > fc){
|
||||
firstFullWave = waveStart;
|
||||
|
|
@ -909,7 +913,7 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
|
|||
}
|
||||
}
|
||||
}
|
||||
//PrintAndLog("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
|
||||
//prnt("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
|
||||
|
||||
//test each valid clock from greatest to smallest to see which lines up
|
||||
for(clkCnt=7; clkCnt >= 1 ; clkCnt--){
|
||||
|
|
@ -917,7 +921,7 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
|
|||
waveStart = 0;
|
||||
errCnt=0;
|
||||
peakcnt=0;
|
||||
//PrintAndLog("DEBUG: clk: %d, lastClkBit: %d",clk[clkCnt],lastClkBit);
|
||||
//prnt("DEBUG: clk: %d, lastClkBit: %d",clk[clkCnt],lastClkBit);
|
||||
|
||||
for (i = firstFullWave+fullWaveLen-1; i < loopCnt-2; i++){
|
||||
//top edge of wave = start of new wave
|
||||
|
|
@ -930,7 +934,7 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
|
|||
waveLenCnt = waveEnd-waveStart;
|
||||
if (waveLenCnt > fc){
|
||||
//if this wave is a phase shift
|
||||
//PrintAndLog("DEBUG: phase shift at: %d, len: %d, nextClk: %d, ii: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+clk[clkCnt]-tol,ii+1,fc);
|
||||
//prnt("DEBUG: phase shift at: %d, len: %d, nextClk: %d, ii: %d, fc: %d",waveStart,waveLenCnt,lastClkBit+clk[clkCnt]-tol,ii+1,fc);
|
||||
if (i+1 >= lastClkBit + clk[clkCnt] - tol){ //should be a clock bit
|
||||
peakcnt++;
|
||||
lastClkBit+=clk[clkCnt];
|
||||
|
|
@ -959,11 +963,40 @@ int DetectPSKClock(uint8_t dest[], size_t size, int clock)
|
|||
if (peaksdet[i] > peaksdet[best]) {
|
||||
best = i;
|
||||
}
|
||||
//PrintAndLog("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]);
|
||||
//prnt("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]);
|
||||
}
|
||||
return clk[best];
|
||||
}
|
||||
|
||||
int DetectStrongNRZClk(uint8_t *dest, size_t size, int peak, int low){
|
||||
//find shortest transition from high to low
|
||||
size_t i = 0;
|
||||
size_t transition1 = 0;
|
||||
int lowestTransition = 255;
|
||||
bool lastWasHigh = false;
|
||||
|
||||
//find first valid beginning of a high or low wave
|
||||
while ((dest[i] >= peak || dest[i] <= low) && (i < size))
|
||||
++i;
|
||||
while ((dest[i] < peak && dest[i] > low) && (i < size))
|
||||
++i;
|
||||
lastWasHigh = (dest[i] >= peak);
|
||||
|
||||
if (i==size) return 0;
|
||||
transition1 = i;
|
||||
|
||||
for (;i < size; i++) {
|
||||
if ((dest[i] >= peak && !lastWasHigh) || (dest[i] <= low && lastWasHigh)) {
|
||||
lastWasHigh = (dest[i] >= peak);
|
||||
if (i-transition1 < lowestTransition) lowestTransition = i-transition1;
|
||||
transition1 = i;
|
||||
}
|
||||
}
|
||||
//prnt("DEBUG: LowestTrs: %d",lowestTransition);
|
||||
if (lowestTransition == 255) lowestTransition = 0;
|
||||
return lowestTransition;
|
||||
}
|
||||
|
||||
//by marshmellow
|
||||
//detect nrz clock by reading #peaks vs no peaks(or errors)
|
||||
int DetectNRZClock(uint8_t dest[], size_t size, int clock)
|
||||
|
|
@ -972,8 +1005,7 @@ int DetectNRZClock(uint8_t dest[], size_t size, int clock)
|
|||
uint8_t clk[]={8,16,32,40,50,64,100,128,255};
|
||||
size_t loopCnt = 4096; //don't need to loop through entire array...
|
||||
if (size == 0) return 0;
|
||||
if (size<loopCnt) loopCnt = size;
|
||||
|
||||
if (size<loopCnt) loopCnt = size-20;
|
||||
//if we already have a valid clock quit
|
||||
for (; i < 8; ++i)
|
||||
if (clk[i] == clock) return clock;
|
||||
|
|
@ -982,39 +1014,83 @@ int DetectNRZClock(uint8_t dest[], size_t size, int clock)
|
|||
int peak, low;
|
||||
if (getHiLo(dest, loopCnt, &peak, &low, 75, 75) < 1) return 0;
|
||||
|
||||
//PrintAndLog("DEBUG: peak: %d, low: %d",peak,low);
|
||||
int lowestTransition = DetectStrongNRZClk(dest, size-20, peak, low);
|
||||
size_t ii;
|
||||
uint8_t clkCnt;
|
||||
uint8_t tol = 0;
|
||||
uint16_t peakcnt=0;
|
||||
uint16_t peaksdet[]={0,0,0,0,0,0,0,0};
|
||||
uint16_t maxPeak=0;
|
||||
uint16_t smplCnt = 0;
|
||||
int16_t peakcnt = 0;
|
||||
int16_t peaksdet[] = {0,0,0,0,0,0,0,0};
|
||||
uint16_t maxPeak = 255;
|
||||
bool firstpeak = false;
|
||||
//test for large clipped waves
|
||||
for (i=0; i<loopCnt; i++){
|
||||
if (dest[i] >= peak || dest[i] <= low){
|
||||
peakcnt++;
|
||||
if (!firstpeak) continue;
|
||||
smplCnt++;
|
||||
} else {
|
||||
if (peakcnt>0 && maxPeak < peakcnt){
|
||||
maxPeak = peakcnt;
|
||||
firstpeak=true;
|
||||
if (smplCnt > 6 ){
|
||||
if (maxPeak > smplCnt){
|
||||
maxPeak = smplCnt;
|
||||
//prnt("maxPk: %d",maxPeak);
|
||||
}
|
||||
peakcnt=0;
|
||||
peakcnt++;
|
||||
//prnt("maxPk: %d, smplCnt: %d, peakcnt: %d",maxPeak,smplCnt,peakcnt);
|
||||
smplCnt=0;
|
||||
}
|
||||
}
|
||||
}
|
||||
bool errBitHigh = 0;
|
||||
bool bitHigh = 0;
|
||||
uint8_t ignoreCnt = 0;
|
||||
uint8_t ignoreWindow = 4;
|
||||
bool lastPeakHigh = 0;
|
||||
int lastBit = 0;
|
||||
peakcnt=0;
|
||||
//test each valid clock from smallest to greatest to see which lines up
|
||||
for(clkCnt=0; clkCnt < 8; ++clkCnt){
|
||||
//ignore clocks smaller than largest peak
|
||||
if (clk[clkCnt]<maxPeak) continue;
|
||||
|
||||
//ignore clocks smaller than smallest peak
|
||||
if (clk[clkCnt] < maxPeak - (clk[clkCnt]/4)) continue;
|
||||
//try lining up the peaks by moving starting point (try first 256)
|
||||
for (ii=0; ii< loopCnt; ++ii){
|
||||
for (ii=20; ii < loopCnt; ++ii){
|
||||
if ((dest[ii] >= peak) || (dest[ii] <= low)){
|
||||
peakcnt=0;
|
||||
// now that we have the first one lined up test rest of wave array
|
||||
for (i=0; i < ((int)((size-ii-tol)/clk[clkCnt])-1); ++i){
|
||||
if (dest[ii+(i*clk[clkCnt])]>=peak || dest[ii+(i*clk[clkCnt])]<=low){
|
||||
bitHigh = false;
|
||||
ignoreCnt = 0;
|
||||
lastBit = ii-clk[clkCnt];
|
||||
//loop through to see if this start location works
|
||||
for (i = ii; i < size-20; ++i) {
|
||||
//if we are at a clock bit
|
||||
if ((i >= lastBit + clk[clkCnt] - tol) && (i <= lastBit + clk[clkCnt] + tol)) {
|
||||
//test high/low
|
||||
if (dest[i] >= peak || dest[i] <= low) {
|
||||
//if same peak don't count it
|
||||
if ((dest[i] >= peak && !lastPeakHigh) || (dest[i] <= low && lastPeakHigh)) {
|
||||
peakcnt++;
|
||||
}
|
||||
lastPeakHigh = (dest[i] >= peak);
|
||||
bitHigh = true;
|
||||
errBitHigh = false;
|
||||
ignoreCnt = ignoreWindow;
|
||||
lastBit += clk[clkCnt];
|
||||
} else if (i == lastBit + clk[clkCnt] + tol) {
|
||||
lastBit += clk[clkCnt];
|
||||
}
|
||||
//else if not a clock bit and no peaks
|
||||
} else if (dest[i] < peak && dest[i] > low){
|
||||
if (ignoreCnt==0){
|
||||
bitHigh=false;
|
||||
if (errBitHigh==true) peakcnt--;
|
||||
errBitHigh=false;
|
||||
} else {
|
||||
ignoreCnt--;
|
||||
}
|
||||
// else if not a clock bit but we have a peak
|
||||
} else if ((dest[i]>=peak || dest[i]<=low) && (!bitHigh)) {
|
||||
//error bar found no clock...
|
||||
errBitHigh=true;
|
||||
}
|
||||
}
|
||||
if(peakcnt>peaksdet[clkCnt]) {
|
||||
peaksdet[clkCnt]=peakcnt;
|
||||
|
|
@ -1025,11 +1101,16 @@ int DetectNRZClock(uint8_t dest[], size_t size, int clock)
|
|||
int iii=7;
|
||||
uint8_t best=0;
|
||||
for (iii=7; iii > 0; iii--){
|
||||
if (peaksdet[iii] > peaksdet[best]){
|
||||
if ((peaksdet[iii] >= (peaksdet[best]-1)) && (peaksdet[iii] <= peaksdet[best]+1) && lowestTransition) {
|
||||
if (clk[iii] > (lowestTransition - (clk[iii]/8)) && clk[iii] < (lowestTransition + (clk[iii]/8))) {
|
||||
best = iii;
|
||||
}
|
||||
//PrintAndLog("DEBUG: Clk: %d, peaks: %d, errs: %d, bestClk: %d",clk[iii],peaksdet[iii],bestErr[iii],clk[best]);
|
||||
} else if (peaksdet[iii] > peaksdet[best]){
|
||||
best = iii;
|
||||
}
|
||||
//prnt("DEBUG: Clk: %d, peaks: %d, maxPeak: %d, bestClk: %d, lowestTrs: %d",clk[iii],peaksdet[iii],maxPeak, clk[best], lowestTransition);
|
||||
}
|
||||
|
||||
return clk[best];
|
||||
}
|
||||
|
||||
|
|
@ -1089,123 +1170,37 @@ int indala26decode(uint8_t *bitStream, size_t *size, uint8_t *invert)
|
|||
return (int) startidx;
|
||||
}
|
||||
|
||||
// by marshmellow - demodulate NRZ wave (both similar enough)
|
||||
// by marshmellow - demodulate NRZ wave
|
||||
// peaks invert bit (high=1 low=0) each clock cycle = 1 bit determined by last peak
|
||||
// there probably is a much simpler way to do this....
|
||||
int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert, int maxErr)
|
||||
{
|
||||
int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert){
|
||||
if (justNoise(dest, *size)) return -1;
|
||||
*clk = DetectNRZClock(dest, *size, *clk);
|
||||
if (*clk==0) return -2;
|
||||
size_t i, gLen = 4096;
|
||||
if (gLen>*size) gLen = *size;
|
||||
if (gLen>*size) gLen = *size-20;
|
||||
int high, low;
|
||||
if (getHiLo(dest, gLen, &high, &low, 75, 75) < 1) return -3; //25% fuzz on high 25% fuzz on low
|
||||
int lastBit = 0; //set first clock check
|
||||
size_t iii = 0, bitnum = 0; //bitnum counter
|
||||
uint16_t errCnt = 0, MaxBits = 1000;
|
||||
size_t bestErrCnt = maxErr+1;
|
||||
size_t bestPeakCnt = 0, bestPeakStart = 0;
|
||||
uint8_t bestFirstPeakHigh=0, firstPeakHigh=0, curBit=0, bitHigh=0, errBitHigh=0;
|
||||
uint8_t tol = 1; //clock tolerance adjust - waves will be accepted as within the clock if they fall + or - this value + clock from last valid wave
|
||||
uint16_t peakCnt=0;
|
||||
uint8_t ignoreWindow=4;
|
||||
uint8_t ignoreCnt=ignoreWindow; //in case of noise near peak
|
||||
//loop to find first wave that works - align to clock
|
||||
for (iii=0; iii < gLen; ++iii){
|
||||
if ((dest[iii]>=high) || (dest[iii]<=low)){
|
||||
if (dest[iii]>=high) firstPeakHigh=1;
|
||||
else firstPeakHigh=0;
|
||||
lastBit=iii-*clk;
|
||||
peakCnt=0;
|
||||
errCnt=0;
|
||||
//loop through to see if this start location works
|
||||
for (i = iii; i < *size; ++i) {
|
||||
// if we are at a clock bit
|
||||
if ((i >= lastBit + *clk - tol) && (i <= lastBit + *clk + tol)) {
|
||||
//test high/low
|
||||
if (dest[i] >= high || dest[i] <= low) {
|
||||
bitHigh = 1;
|
||||
peakCnt++;
|
||||
errBitHigh = 0;
|
||||
ignoreCnt = ignoreWindow;
|
||||
lastBit += *clk;
|
||||
} else if (i == lastBit + *clk + tol) {
|
||||
lastBit += *clk;
|
||||
}
|
||||
//else if no bars found
|
||||
} else if (dest[i] < high && dest[i] > low){
|
||||
if (ignoreCnt==0){
|
||||
bitHigh=0;
|
||||
if (errBitHigh==1) errCnt++;
|
||||
errBitHigh=0;
|
||||
} else {
|
||||
ignoreCnt--;
|
||||
}
|
||||
} else if ((dest[i]>=high || dest[i]<=low) && (bitHigh==0)) {
|
||||
//error bar found no clock...
|
||||
errBitHigh=1;
|
||||
}
|
||||
if (((i-iii) / *clk)>=MaxBits) break;
|
||||
}
|
||||
//we got more than 64 good bits and not all errors
|
||||
if (((i-iii) / *clk) > 64 && (errCnt <= (maxErr))) {
|
||||
//possible good read
|
||||
if (!errCnt || peakCnt > bestPeakCnt){
|
||||
bestFirstPeakHigh=firstPeakHigh;
|
||||
bestErrCnt = errCnt;
|
||||
bestPeakCnt = peakCnt;
|
||||
bestPeakStart = iii;
|
||||
if (!errCnt) break; //great read - finish
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
//PrintAndLog("DEBUG: bestErrCnt: %d, maxErr: %d, bestStart: %d, bestPeakCnt: %d, bestPeakStart: %d",bestErrCnt,maxErr,bestStart,bestPeakCnt,bestPeakStart);
|
||||
if (bestErrCnt > maxErr) return bestErrCnt;
|
||||
|
||||
//best run is good enough set to best run and set overwrite BinStream
|
||||
lastBit = bestPeakStart - *clk;
|
||||
memset(dest, bestFirstPeakHigh^1, bestPeakStart / *clk);
|
||||
bitnum += (bestPeakStart / *clk);
|
||||
for (i = bestPeakStart; i < *size; ++i) {
|
||||
// if expecting a clock bit
|
||||
if ((i >= lastBit + *clk - tol) && (i <= lastBit + *clk + tol)) {
|
||||
// test high/low
|
||||
if (dest[i] >= high || dest[i] <= low) {
|
||||
peakCnt++;
|
||||
bitHigh = 1;
|
||||
errBitHigh = 0;
|
||||
ignoreCnt = ignoreWindow;
|
||||
curBit = *invert;
|
||||
if (dest[i] >= high) curBit ^= 1;
|
||||
dest[bitnum++] = curBit;
|
||||
lastBit += *clk;
|
||||
//else no bars found in clock area
|
||||
} else if (i == lastBit + *clk + tol) {
|
||||
dest[bitnum++] = curBit;
|
||||
lastBit += *clk;
|
||||
uint8_t bit=0;
|
||||
//convert wave samples to 1's and 0's
|
||||
for(i=20; i < *size-20; i++){
|
||||
if (dest[i] >= high) bit = 1;
|
||||
if (dest[i] <= low) bit = 0;
|
||||
dest[i] = bit;
|
||||
}
|
||||
//else if no bars found
|
||||
} else if (dest[i] < high && dest[i] > low){
|
||||
if (ignoreCnt == 0){
|
||||
bitHigh = 0;
|
||||
if (errBitHigh == 1){
|
||||
dest[bitnum++] = 7;
|
||||
errCnt++;
|
||||
//now demod based on clock (rf/32 = 32 1's for one 1 bit, 32 0's for one 0 bit)
|
||||
size_t lastBit = 0;
|
||||
size_t numBits = 0;
|
||||
for(i=21; i < *size-20; i++) {
|
||||
//if transition detected or large number of same bits - store the passed bits
|
||||
if (dest[i] != dest[i-1] || (i-lastBit) == (10 * *clk)) {
|
||||
memset(dest+numBits, dest[i-1] ^ *invert, (i - lastBit + (*clk/4)) / *clk);
|
||||
numBits += (i - lastBit + (*clk/4)) / *clk;
|
||||
lastBit = i-1;
|
||||
}
|
||||
errBitHigh=0;
|
||||
} else {
|
||||
ignoreCnt--;
|
||||
}
|
||||
} else if ((dest[i] >= high || dest[i] <= low) && (bitHigh == 0)) {
|
||||
//error bar found no clock...
|
||||
errBitHigh=1;
|
||||
}
|
||||
if (bitnum >= MaxBits) break;
|
||||
}
|
||||
*size = bitnum;
|
||||
return bestErrCnt;
|
||||
*size = numBits;
|
||||
return 0;
|
||||
}
|
||||
|
||||
//by marshmellow
|
||||
|
|
@ -1223,18 +1218,18 @@ uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fc
|
|||
size_t i;
|
||||
if (size == 0) return 0;
|
||||
|
||||
uint8_t fcTol = (uint8_t)(0.5+(float)(fcHigh-fcLow)/2);
|
||||
uint8_t fcTol = ((fcHigh*100 - fcLow*100)/2 + 50)/100; //(uint8_t)(0.5+(float)(fcHigh-fcLow)/2);
|
||||
rfLensFnd=0;
|
||||
fcCounter=0;
|
||||
rfCounter=0;
|
||||
firstBitFnd=0;
|
||||
//PrintAndLog("DEBUG: fcTol: %d",fcTol);
|
||||
// prime i to first up transition
|
||||
for (i = 1; i < size-1; i++)
|
||||
// prime i to first peak / up transition
|
||||
for (i = 160; i < size-20; i++)
|
||||
if (BitStream[i] > BitStream[i-1] && BitStream[i]>=BitStream[i+1])
|
||||
break;
|
||||
|
||||
for (; i < size-1; i++){
|
||||
for (; i < size-20; i++){
|
||||
fcCounter++;
|
||||
rfCounter++;
|
||||
|
||||
|
|
@ -1252,7 +1247,7 @@ uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fc
|
|||
//not the same size as the last wave - start of new bit sequence
|
||||
if (firstBitFnd > 1){ //skip first wave change - probably not a complete bit
|
||||
for (int ii=0; ii<15; ii++){
|
||||
if (rfLens[ii] == rfCounter){
|
||||
if (rfLens[ii] >= (rfCounter-4) && rfLens[ii] <= (rfCounter+4)){
|
||||
rfCnts[ii]++;
|
||||
rfCounter = 0;
|
||||
break;
|
||||
|
|
@ -1274,7 +1269,7 @@ uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fc
|
|||
uint8_t rfHighest=15, rfHighest2=15, rfHighest3=15;
|
||||
|
||||
for (i=0; i<15; i++){
|
||||
//PrintAndLog("DEBUG: RF %d, cnts %d",rfLens[i], rfCnts[i]);
|
||||
//prnt("DEBUG: RF %d, cnts %d",rfLens[i], rfCnts[i]);
|
||||
//get highest 2 RF values (might need to get more values to compare or compare all?)
|
||||
if (rfCnts[i]>rfCnts[rfHighest]){
|
||||
rfHighest3=rfHighest2;
|
||||
|
|
@ -1291,12 +1286,13 @@ uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fc
|
|||
// we could have mistakenly made a 9 a 10 instead of an 8 or visa versa so rfLens could be 1 FC off
|
||||
uint8_t tol1 = fcHigh+1;
|
||||
|
||||
//PrintAndLog("DEBUG: hightest: 1 %d, 2 %d, 3 %d",rfLens[rfHighest],rfLens[rfHighest2],rfLens[rfHighest3]);
|
||||
//prnt("DEBUG: hightest: 1 %d, 2 %d, 3 %d",rfLens[rfHighest],rfLens[rfHighest2],rfLens[rfHighest3]);
|
||||
|
||||
// loop to find the highest clock that has a remainder less than the tolerance
|
||||
// compare samples counted divided by
|
||||
// test 128 down to 32 (shouldn't be possible to have fc/10 & fc/8 and rf/16 or less)
|
||||
int ii=7;
|
||||
for (; ii>=0; ii--){
|
||||
for (; ii>=2; ii--){
|
||||
if (rfLens[rfHighest] % clk[ii] < tol1 || rfLens[rfHighest] % clk[ii] > clk[ii]-tol1){
|
||||
if (rfLens[rfHighest2] % clk[ii] < tol1 || rfLens[rfHighest2] % clk[ii] > clk[ii]-tol1){
|
||||
if (rfLens[rfHighest3] % clk[ii] < tol1 || rfLens[rfHighest3] % clk[ii] > clk[ii]-tol1){
|
||||
|
|
@ -1317,8 +1313,8 @@ uint8_t detectFSKClk(uint8_t *BitStream, size_t size, uint8_t fcHigh, uint8_t fc
|
|||
//mainly used for FSK field clock detection
|
||||
uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
|
||||
{
|
||||
uint8_t fcLens[] = {0,0,0,0,0,0,0,0,0,0};
|
||||
uint16_t fcCnts[] = {0,0,0,0,0,0,0,0,0,0};
|
||||
uint8_t fcLens[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
|
||||
uint16_t fcCnts[] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
|
||||
uint8_t fcLensFnd = 0;
|
||||
uint8_t lastFCcnt=0;
|
||||
uint8_t fcCounter = 0;
|
||||
|
|
@ -1326,11 +1322,11 @@ uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
|
|||
if (size == 0) return 0;
|
||||
|
||||
// prime i to first up transition
|
||||
for (i = 1; i < size-1; i++)
|
||||
for (i = 160; i < size-20; i++)
|
||||
if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1])
|
||||
break;
|
||||
|
||||
for (; i < size-1; i++){
|
||||
for (; i < size-20; i++){
|
||||
if (BitStream[i] > BitStream[i-1] && BitStream[i] >= BitStream[i+1]){
|
||||
// new up transition
|
||||
fcCounter++;
|
||||
|
|
@ -1343,14 +1339,14 @@ uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
|
|||
lastFCcnt = fcCounter;
|
||||
}
|
||||
// find which fcLens to save it to:
|
||||
for (int ii=0; ii<10; ii++){
|
||||
for (int ii=0; ii<15; ii++){
|
||||
if (fcLens[ii]==fcCounter){
|
||||
fcCnts[ii]++;
|
||||
fcCounter=0;
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (fcCounter>0 && fcLensFnd<10){
|
||||
if (fcCounter>0 && fcLensFnd<15){
|
||||
//add new fc length
|
||||
fcCnts[fcLensFnd]++;
|
||||
fcLens[fcLensFnd++]=fcCounter;
|
||||
|
|
@ -1362,11 +1358,11 @@ uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
|
|||
}
|
||||
}
|
||||
|
||||
uint8_t best1=9, best2=9, best3=9;
|
||||
uint8_t best1=14, best2=14, best3=14;
|
||||
uint16_t maxCnt1=0;
|
||||
// go through fclens and find which ones are bigest 2
|
||||
for (i=0; i<10; i++){
|
||||
// PrintAndLog("DEBUG: FC %d, Cnt %d, Errs %d",fcLens[i],fcCnts[i],errCnt);
|
||||
for (i=0; i<15; i++){
|
||||
//prnt("DEBUG: FC %d, Cnt %d",fcLens[i],fcCnts[i]);
|
||||
// get the 3 best FC values
|
||||
if (fcCnts[i]>maxCnt1) {
|
||||
best3=best2;
|
||||
|
|
@ -1380,6 +1376,7 @@ uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
|
|||
best3=i;
|
||||
}
|
||||
}
|
||||
if (fcLens[best1]==0) return 0;
|
||||
uint8_t fcH=0, fcL=0;
|
||||
if (fcLens[best1]>fcLens[best2]){
|
||||
fcH=fcLens[best1];
|
||||
|
|
@ -1388,11 +1385,13 @@ uint16_t countFC(uint8_t *BitStream, size_t size, uint8_t fskAdj)
|
|||
fcH=fcLens[best2];
|
||||
fcL=fcLens[best1];
|
||||
}
|
||||
//prnt("DEBUG: dd %d > %d",(size-180)/fcH/3,fcCnts[best1]+fcCnts[best2]);
|
||||
if ((size-180)/fcH/3 > fcCnts[best1]+fcCnts[best2]) return 0; //lots of waves not psk or fsk
|
||||
|
||||
// TODO: take top 3 answers and compare to known Field clocks to get top 2
|
||||
|
||||
uint16_t fcs = (((uint16_t)fcH)<<8) | fcL;
|
||||
// PrintAndLog("DEBUG: Best %d best2 %d best3 %d",fcLens[best1],fcLens[best2],fcLens[best3]);
|
||||
//prnt("DEBUG: Best %d best2 %d best3 %d",fcLens[best1],fcLens[best2],fcLens[best3]);
|
||||
if (fskAdj) return fcs;
|
||||
return fcLens[best1];
|
||||
}
|
||||
|
|
@ -1405,6 +1404,7 @@ int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert)
|
|||
uint16_t loopCnt = 4096; //don't need to loop through entire array...
|
||||
if (*size<loopCnt) loopCnt = *size;
|
||||
|
||||
size_t numBits=0;
|
||||
uint8_t curPhase = *invert;
|
||||
size_t i, waveStart=1, waveEnd=0, firstFullWave=0, lastClkBit=0;
|
||||
uint8_t fc=0, fullWaveLen=0, tol=1;
|
||||
|
|
@ -1421,7 +1421,7 @@ int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert)
|
|||
waveEnd = i+1;
|
||||
//PrintAndLog("DEBUG: waveEnd: %d",waveEnd);
|
||||
waveLenCnt = waveEnd-waveStart;
|
||||
if (waveLenCnt > fc && waveStart > fc){ //not first peak and is a large wave
|
||||
if (waveLenCnt > fc && waveStart > fc && !(waveLenCnt > fc+2)){ //not first peak and is a large wave but not out of whack
|
||||
lastAvgWaveVal = avgWaveVal/(waveLenCnt);
|
||||
firstFullWave = waveStart;
|
||||
fullWaveLen=waveLenCnt;
|
||||
|
|
@ -1434,14 +1434,21 @@ int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert)
|
|||
}
|
||||
avgWaveVal += dest[i+2];
|
||||
}
|
||||
if (firstFullWave == 0) {
|
||||
// no phase shift detected - could be all 1's or 0's - doesn't matter where we start
|
||||
// so skip a little to ensure we are past any Start Signal
|
||||
firstFullWave = 160;
|
||||
memset(dest, curPhase, firstFullWave / *clock);
|
||||
} else {
|
||||
memset(dest, curPhase^1, firstFullWave / *clock);
|
||||
}
|
||||
//advance bits
|
||||
numBits += (firstFullWave / *clock);
|
||||
//set start of wave as clock align
|
||||
lastClkBit = firstFullWave;
|
||||
//PrintAndLog("DEBUG: firstFullWave: %d, waveLen: %d",firstFullWave,fullWaveLen);
|
||||
lastClkBit = firstFullWave; //set start of wave as clock align
|
||||
//PrintAndLog("DEBUG: clk: %d, lastClkBit: %d", *clock, lastClkBit);
|
||||
waveStart = 0;
|
||||
size_t numBits=0;
|
||||
//set skipped bits
|
||||
memset(dest, curPhase^1, firstFullWave / *clock);
|
||||
numBits += (firstFullWave / *clock);
|
||||
dest[numBits++] = curPhase; //set first read bit
|
||||
for (i = firstFullWave + fullWaveLen - 1; i < *size-3; i++){
|
||||
//top edge of wave = start of new wave
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@ int getHiLo(uint8_t *BitStream, size_t size, int *high, int *low, uint8_t f
|
|||
uint32_t manchesterEncode2Bytes(uint16_t datain);
|
||||
int ManchesterEncode(uint8_t *BitStream, size_t size);
|
||||
int manrawdecode(uint8_t *BitStream, size_t *size, uint8_t invert);
|
||||
int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert, int maxErr);
|
||||
int nrzRawDemod(uint8_t *dest, size_t *size, int *clk, int *invert);
|
||||
uint8_t parityTest(uint32_t bits, uint8_t bitLen, uint8_t pType);
|
||||
uint8_t preambleSearch(uint8_t *BitStream, uint8_t *preamble, size_t pLen, size_t *size, size_t *startIdx);
|
||||
int pskRawDemod(uint8_t dest[], size_t *size, int *clock, int *invert);
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue