github/RRG-Proxmark3
1
0
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2025-08-21 13:53:55 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions

update docs

Browse source
This commit is contained in:
Philippe Teuwen 2019-05-05 19:53:58 +02:00
commit 5b86284b49
15 changed files with 464 additions and 506 deletions
Download patch file Download diff file Expand all files Collapse all files

41
doc/md/Installation_Instructions/Windows-Installation-Instructions.md
View file

@ -30,54 +30,37 @@ Download the required proxspace repo. https://github.com/Gator96100/ProxSpace/
Extract 'ProxSpace' to a location on drive without spaces.
For example D:\OneDrive\Documents\GitHub is ok whereas C:\My Documents\My Projects\proxspace is not.
### Clone RFID RESEARCH GROUP files
### Clone the RRG/Iceman repository
Clone fork
```sh
git clone https://github.com/RfidResearchGroup/proxmark3.git
```
### Copy files to Proxspace
Copy all the contents from the proxmark3 folder into the proxspace pm3 folder
Copy all the contents from the `proxmark3` folder into the proxspace `pm3` folder
### Run the .bat
Run runme.bat or runme64.bat depending on your Windows architecture.
Run `runme.bat` or `runme64.bat` depending on your Windows architecture.
Please note you will need to use / as you are using BASH.
Please note you will need to use `/` as you are using BASH.
### Make
### Compile and use the project
CLEAN COMPILE inside the pm3 window.
```sh
make clean && make all
```
### Flash the image
Now you're ready to follow the [compilation instructions](/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md).
The only differences are that executables end with `.exe` (e.g. `client/flasher.exe`) and that the Proxmark3 port is one of your `comX` ports where "X" is the com port number assigned to proxmark3 under Windows.
So flashing will resemble
Flash the BOOTROM & FULLIMAGE
```sh
client/flasher.exe comX -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf
```
### Run the client
Assuming you have Proxmark3 Windows drivers installed you can run the Proxmark software where "X" is the com port number assigned to proxmark3 under Windows.
And running the client will resemble
Change into the client folder
```sh
cd client
```
Run the client
```sh
./proxmark3.exe comX
```
### Test
Check your firmware revision on the Proxmark III with
```sh
hw ver
```
For basic help type help. Or for help on a set of sub commands type the command followed by help. For example hf mf help.
Make sure you head over to the use of [proxmark area](https://github.com/5w0rdfish/proxmark3/tree/master/Use_of_Proxmark) to help you get on your way!