reorganize doc

doc/md/Use_of_Proxmark/1_Validation.md

@@ -0,0 +1,57 @@
+## 1. Validating proxmark client functionality
+
+If all went well you should get some information about the firmware and memory usage as well as the prompt,  something like this.
+We should be able to answer ..can I connect to my proxmark device?   does it respond?
+
+>[=] UART Setting serial baudrate 460800
+>
+>Proxmark3 RFID instrument
+>
+> [ CLIENT ]
+>
+> client: iceman build for RDV40 with flashmem; smartcard;
+>
+> [ ARM ]
+>
+> bootrom: iceman/master/4517531c-dirty-unclean 2018-12-13 15:42:24
+>
+>   os: iceman/master/5a34550a-dirty-unclean 2019-01-07 23:04:07
+>
+> [ FPGA ]
+>
+> LF image built for 2s30vq100 on 2018/ 9/ 8 at 13:57:51
+>
+> HF image built for 2s30vq100 on 2018/ 9/ 3 at 21:40:23
+>
+> [ Hardware ]
+>
+>--= uC: AT91SAM7S512 Rev B
+>
+>--= Embedded Processor: ARM7TDMI
+>
+>--= Nonvolatile Program Memory Size: 512K bytes, Used: 247065 bytes (47%) Free: 277223 bytes (53%)
+>
+>--= Second Nonvolatile Program Memory Size: None
+>
+>--= Internal SRAM Size: 64K bytes
+>
+>--= Architecture Identifier: AT91SAM7Sxx Series
+>
+>--= Nonvolatile Program Memory Type: Embedded Flash Memory
+>
+> pm3 -->
+
+### Run the following commands
+    pm3 --> hw status
+    pm3 --> hw version
+    pm3 --> hw tune
+
+You are now ready to use your newly upgraded proxmark3 device.  Many commands uses the **h** parameter to show a help text. The client uses a arcaic command structure which will be hard to grasp at first.  Here are some commands to start off with.
+
+    pm3 --> hf
+    pm3 --> hf 14a info
+    pm3 --> lf
+    pm3 --> lf search
+
+### Quit client
+    pm3 --> quit

doc/md/Use_of_Proxmark/2_Configuration-and-Verification.md

@@ -0,0 +1,38 @@
+### First things on your RDV40
+You will need to run these commands to make sure your rdv4 is prepared
+
+    pm3 --> mem load f default_keys m
+    pm3 --> mem load f default_pwd t
+    pm3 --> mem load f default_iclass_keys i
+    pm3 --> lf t55xx deviceconfig a 29 b 17 c 15 d 47 e 15 p
+
+### Verify sim module firmware version
+To make sure you got the latest sim module firmware.
+_Lastest version is v3.11_
+
+    pm3 --> hw status
+
+Find version in the long output,  look for these two lines
+
+    #db# Smart card module (ISO 7816)
+    #db#   version.................v2.06
+
+This version is obselete. The following command upgrades your device sim module firmware.
+Don't not turn of your device during the execution of this command.
+
+    pm3 --> sc upgrade f ../tools/simmodule/SIM011.BIN 
+    
+You get the following output,  this is a successful execution.    
+    
+    [!] WARNING - Smartcard socket firmware upgrade.          
+    [!] A dangerous command, do wrong and you will brick the smart card socket          
+    [+] Smartcard socket firmware uploading to PM3          
+    ..
+    [+] Smartcard socket firmware updating,  don't turn off your PM3!          
+    #db# FW 0000          
+    #db# FW 0080          
+    #db# FW 0100          
+    #db# FW 0180          
+    #db# FW 0200          
+    #db# FW 0280          
+    [+] Smartcard socket firmware upgraded successful        

doc/md/Use_of_Proxmark/3_Commands-and-Features.md

@@ -0,0 +1,21 @@
+
+# Commands and Features
+
+## New Features in RDV4
+
+Further details coming soon
+
+### Run the following commands
+    pm3 --> hw status
+    pm3 --> hw version
+    pm3 --> hw tune
+
+You are now ready to use your newly upgraded proxmark3 device.  Many commands uses the **h** parameter to show a help text. The client uses a arcaic command structure which will be hard to grasp at first.  Here are some commands to start off with.
+
+    pm3 --> hf
+    pm3 --> hf 14a info
+    pm3 --> lf
+    pm3 --> lf search
+
+### Quit client
+    pm3 --> quit