reorganize doc

doc/md/Installation_Instructions/Windows-Installation-Instructions.md

@@ -0,0 +1,83 @@
+# Building on Windows
+You will need to use the Gator96100 Proxspace package to assist in your windows installation.
+This can be downloaded from https://github.com/Gator96100/ProxSpace/
+
+## Notes
+If you receive gcc errors using v3.1 during build, download and use v2.2. This may help resolve the issue.
+
+- https://github.com/Gator96100/ProxSpace/releases/tag/v3.1   (release v3.1 with gcc v7.3.0 )
+- https://github.com/Gator96100/ProxSpace/releases/tag/v2.2   (release v2.2 with gcc v5.3.0 arm-none-eabi-gcc v7.1.0)
+
+---
+# Video Installation guide
+[![Windows Installation tutorial](https://github.com/5w0rdfish/Proxmark3-RDV4-ParrotOS/blob/master/screenshot-www.youtube.com-2019.03.17-20-44-33.png)](https://youtu.be/zzF0NCMJnYU "Windows Installation Tutorial")
+
+## Manual Installation
+
+### Driver Installation
+
+Install required drivers for your windows installation. You will may need admin privileges to do this. 
+(This is covered in the video) Step by step guides are online such as [RiscCorps](https://store.ryscc.com/blogs/news/how-to-install-a-proxmark3-driver-on-windows-10)
+
+### Install Github
+
+Install Github for Windows https://desktop.github.com/
+
+### Download / clone Proxspace repo
+
+Download the required proxspace repo. https://github.com/Gator96100/ProxSpace/
+
+Extract 'ProxSpace' to a location on drive without spaces. 
+For example D:\OneDrive\Documents\GitHub is ok whereas C:\My Documents\My Projects\proxspace is not.
+
+### Clone RFID RESEARCH GROUP files
+
+Clone fork
+```sh
+git clone https://github.com/RfidResearchGroup/proxmark3.git
+```
+### Copy files to Proxspace
+
+Copy all the contents from the proxmark3 folder into the proxspace pm3 folder
+
+### Run the .bat
+
+Run runme.bat or runme64.bat depending on your Windows architecture.
+
+Please note you will need to use / as you are using BASH.
+
+### Make 
+
+CLEAN COMPILE inside the pm3 window.
+```sh
+make clean && make all
+```
+### Flash the image
+
+Flash the BOOTROM & FULLIMAGE
+```sh
+client/flasher.exe comX -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf
+```
+	
+### Run the client
+
+Assuming you have Proxmark3 Windows drivers installed you can run the Proxmark software where "X" is the com port number assigned to proxmark3 under Windows. 
+
+Change into the client folder
+```sh
+cd client
+```
+
+Run the client	
+```sh
+./proxmark3.exe comX
+```
+
+### Test
+
+Check your firmware revision on the Proxmark III with 
+```sh
+hw ver
+```
+For basic help type help. Or for help on a set of sub commands type the command followed by help. For example hf mf help.
+Make sure you head over to the use of [proxmark area](https://github.com/5w0rdfish/proxmark3/tree/master/Use_of_Proxmark) to help you get on your way!