github/RRG-Proxmark3
1
0
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2025-08-21 13:53:55 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions

Moved vscode instructions

Browse source
This commit is contained in:
gator96100 2020-12-30 00:00:39 +01:00
commit 483707a45a
3 changed files with 73 additions and 74 deletions
Download patch file Download diff file Expand all files Collapse all files

72
doc/md/Installation_Instructions/VSCode-Installation-Instructions.md Normal file
View file

@ -0,0 +1,72 @@
# Visual Studio Code for debugging
Download and install [Visual Studio Code](https://code.visualstudio.com/)
Download and install [J-Link Software and Documentation pack](https://www.segger.com/downloads/jlink)
## Debian / Ubuntu / Kali / ParrotOS / Raspbian
Install dependencies
```sh
sudo apt-get install --no-install-recommends binutils-arm-none-eabi gdb openocd gdb-multiarch
```
On some systems `arm-none-eabi-gdb` was replaced with `gdb-multiarch`. In order to use the J-Link debugger you need to link `arm-none-eabi-gdb` to `gdb-multiarch`:
```sh
ln -s /usr/bin/gdb-multiarch /usr/bin/arm-none-eabi-gdb
```
Setup the Visual Studio Code configuration, by going into your project folder and run:
```sh
./.vscode/setup.sh
```
now launch Visual Studio Code and open your project folder
## Windows: WSL
Enter WSL prompt (`wsl` or `start windows terminal`)
Install dependencies
```sh
sudo apt-get install --no-install-recommends binutils-arm-none-eabi gdb openocd gdb-multiarch
```
The J-Link debugger requires `arm-none-eabi-gdb` which was replaced with `gdb-multiarch`. In order to use the J-Link debugger link `arm-none-eabi-gdb` to `gdb-multiarch`:
```sh
sudo ln -s /usr/bin/gdb-multiarch /usr/bin/arm-none-eabi-gdb
```
Setup the Visual Studio Code configuration, by going into your project folder and run:
```sh
./.vscode/setup.sh
```
and launch Visual Studio Code
```sh
code .
```
## Windows: ProxSpace
Download and install [Visual Studio Code](https://code.visualstudio.com/)
Download and install [J-Link Software and Documentation pack for Windows](https://www.segger.com/downloads/jlink/JLink_Windows.exe)
Enter PorxSpace (`runme64.bat`) and enter your project folder.
Setup the Visual Studio Code configuration, by running:
```sh
./.vscode/setup.sh
```
now launch Visual Studio Code and open your project folder
_note_
Please install the recommended Visual Studio Code extensions in order for debugging to work.