hc06 scripts

doc/uart_notes.md

@@ -114,9 +114,7 @@ The USB-UART speed is selected when a program opens the port. E.g.
 
 When the BT add-on is turned off, the HC-06 dongle will not be connected and will fall back into its AT configuration mode (its LED is blinking).
 
-`tools/btaddon/hc06_factory_master.py` changes several times the USB-UART baudrate and parity till it matches the HC-06 dongle settings, then changes the baudrate and parity of the dongle to a default value. (`hc06_factory.py` does more but we're only interested in baudrate in this discussion)
+`tools/btaddon/hc06_factory.py` changes several times the USB-UART baudrate and parity till it matches the HC-06 dongle settings, then changes the baudrate and parity of the dongle to a default value. (`hc06_factory.py` does more but we're only interested in baudrate in this discussion)
-
-TODO tools/btaddon/hc06_factory_master.py
 
 ## Proxmark3 FPC USART + FTDI
 
@@ -147,6 +145,5 @@ Add-on gets powered externally via the "battery" pin.
 
 Turn BTpower switch ON, leave Battery switch OFF
 
-Use e.g. `tools/btaddon/hc06_factory_slave.py`
+Use e.g. `tools/btaddon/hc06_factory.py` with `role = b'S'`
 
-TODO tools/btaddon/hc06_factory_slave.py

tools/btaddon/hc06_console_AT.py

@@ -0,0 +1,45 @@
+#!/usr/bin/env python3
+
+import sys
+import time
+import serial
+
+if len(sys.argv) < 2:
+    print('Usage: %s <baudrate>' % sys.argv[0])
+    sys.exit(1)
+baudrate = int(sys.argv[1])
+ser = serial.Serial(
+    port='/dev/ttyUSB0',
+    baudrate=baudrate,
+    parity=serial.PARITY_NONE,
+    stopbits=serial.STOPBITS_ONE,
+    bytesize=serial.EIGHTBITS
+)
+
+ser.isOpen()
+ser.write(b'AT')
+out = b''
+time.sleep(1)
+while ser.inWaiting() > 0:
+    out += ser.read(1)
+if out != b'OK':
+    ser.close()
+    print("HC-06 dongle not found. Abort.")
+    exit(1)
+print('Enter your commands below.\r\nInsert "exit" to leave the application.')
+
+while 1 :
+    # get keyboard input
+    inp = input(">> ")
+    inp = inp.encode('utf8')
+    if inp == 'exit':
+        ser.close()
+        exit()
+    else:
+        ser.write(inp)
+        out = b''
+        time.sleep(1)
+        while ser.inWaiting() > 0:
+            out += ser.read(1)
+        if out != b'':
+            print("<< " + out.decode('utf8'))

tools/btaddon/hc06_factory.py

@@ -0,0 +1,108 @@
+#!/usr/bin/env python3
+
+import time
+import serial
+
+name = b'PM3_RDV4.0'
+pin  = b'1234'
+role = b'M'
+#role = b'S'
+
+ser = None
+
+baud2id = {
+       9600:b'4',
+      19200:b'5',
+      38400:b'6',
+      57600:b'7',
+     115200:b'8',
+     230400:b'9',
+     460800:b'A',
+     921600:b'B',
+    1382400:b'C'
+}
+
+p2c={
+    serial.PARITY_NONE:b'N',
+    serial.PARITY_ODD: b'O',
+    serial.PARITY_EVEN:b'E'
+}
+
+def send(cmd):
+    print("<<" + cmd.decode('utf8'))
+    ser.write(cmd)
+    out = b''
+    time.sleep(1)
+    while ser.inWaiting() > 0:
+        out += ser.read(1)
+    if out != b'':
+        print(">>" + out.decode('utf8'))
+    return out
+
+def usart_bt_testcomm(baudrate, parity):
+    print("Configuring UART: %i 8%s1" % (baudrate, p2c[parity].decode('utf8')))
+    global ser
+    ser = serial.Serial(
+        port='/dev/ttyUSB0',
+        baudrate=baudrate,
+        parity=parity,
+        stopbits=serial.STOPBITS_ONE,
+        bytesize=serial.EIGHTBITS
+    )
+    ser.isOpen()
+    resp=send(b'AT')
+    if resp != b'OK':
+        ser.close()
+    return resp == b'OK'
+
+if __name__ == '__main__':
+    print("WARNING: process only if strictly needed!")
+    print("This requires HC-06 dongle turned ON and NOT connected!")
+    if input("Is the HC-06 dingle LED blinking? (Say 'n' if you want to abort) [y/n] ") != 'y':
+        print("Aborting.")
+        exit(1)
+
+    print("\nTrying to detect current settings... Please be patient.")
+
+    if not usart_bt_testcomm(115200, serial.PARITY_NONE):
+        brs = [1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600, 1382400]
+        ps = [ serial.PARITY_NONE, serial.PARITY_ODD, serial.PARITY_EVEN ]
+        ibr = 0
+        ip = 0
+        for p, b in [(i, j) for i in ps for j in brs]:
+            if usart_bt_testcomm(b, p):
+                break
+        else:
+            print("Sorry, add-on not found. Abort.")
+            exit(1)
+
+    print("Reconfiguring add-on to default settings.")
+
+    resp=send(b'AT+VERSION')
+# Change name:
+    resp=send(b'AT+NAME%s' % name)
+# Change BT PIN:
+    resp=send(b'AT+PIN%s' % pin)
+# Change BT ROLE:
+    resp=send(b'AT+ROLE=%s' % role)
+# Change BT Parity N:
+    resp=send(b'AT+PN')
+# Change BT 115200:
+    resp=send(b'AT+BAUD%s' % baud2id[115200])
+    ser.close()
+
+    time.sleep(1)
+    print("Trying to connect add-on with the new settings.")
+    ser = serial.Serial(
+        port='/dev/ttyUSB0',
+        baudrate=115200,
+        parity=serial.PARITY_NONE,
+        stopbits=serial.STOPBITS_ONE,
+        bytesize=serial.EIGHTBITS
+    )
+    ser.isOpen()
+    if (send(b'AT') == b'OK'):
+        print("HC-06 dongle successfully reset")
+    else:
+        print("Lost contact with add-on, please try again")
+    ser.close()