diff --git a/README BEFORE STARTING.txt b/README BEFORE STARTING.txt
deleted file mode 100644
index a8a62b2e4..000000000
--- a/README BEFORE STARTING.txt	
+++ /dev/null
@@ -1,55 +0,0 @@
-
-											#######################################
-											Proxmark III Develoment Kit for Windows
-											#######################################
-
-## What's installed ##
-
-	This cut down development environment has been created specifically for Windows users.
-	* devkitARM r41
-	* SVN 1.7.4
-	* Qt 4.6.2
-
-## IMPORTANT ##
-
-	Your Proxmark III might be running old firmware. If this is the case, please download the following package and follow the instructions included to update your Proxmark III
-	https://code.google.com/p/proxmark3/downloads/detail?name=pm3-bin-672.zip&can=2&q=
-
-	IF YOU ARE UNSURE OF ANYTHING. ASK.
-	 Wiki: https://code.google.com/p/proxmark3/wiki/
-	Forum: http://www.proxmark.org/forum/
-	  IRC: (freenode) proxmark3
-
-## Usage ##
-
-	Extract 'ProxSpace' to a location on drive without spaces.
-		For example C:\Proxspace or D:\projects\public\proxmark\proxspace are ok whereas C:\My Documents\My Projects\proxspace is not.
-
-	Run 'runme.bat'
-
-	To get the Proxmark III trunk or to update checked out project type './update_SVN.sh'.
-	To change to a specific revision type 'svn up -r 558', where 588 is the revision number.
-
-	To build the project type 'make clean && make all'.
-
-	To run the Proxmark III client type './client/proxmark3.exe COM1' where COM1 is the USB port of the Proxmark III.
-
-	To check your firmware revision on the Proxmark III type 'hw ver'.
-
-	To get basic help type 'help'. Or for help on a set of sub commands type the command followed by help. eg. 'hf mf help'
-
-	To exit type 'exit'.
-
-## Firmware upgrading the Proxmark III ##
-
-	To upgrade the firmware on the Proxmark III:
-	
-	Please note that more detail is available on the wiki: https://code.google.com/p/proxmark3/wiki/
-
-	1. Press and hold the button on the Proxmark III and attach it to a USB port on your computer.
-	2. Run './client/flasher -b COM1 ./bootrom/obj/bootrom.elf'
-	3. Wait for the process to complete.
-	4. Detach the Proxmark III from your computer.
-	5. Repeat Steps 1-4 two more times replacing Step 2 with the following two lines.
-	   ./client/flasher COM1 ./armsrc/obj/fpgaimage.elf
-	   ./client/flasher COM1 ./armsrc/obj/osimage.elf
diff --git a/README.md b/README.md
new file mode 100644
index 000000000..50e0385cf
--- /dev/null
+++ b/README.md
@@ -0,0 +1,37 @@
+
+	#######################################
+	Proxmark III Develoment Kit for Windows
+	#######################################
+## Different branches ##
+    The master branch is designed for development, when 'runme.bat' is started a terminal opens that allows to run make.
+    The autoBuild branch runs a script (msys/scrip.sh) at startup that updates all git repositories in the pm3 folder and then wants to compile them, it was not designed for development, just for compiling.
+    
+## What's installed ##
+
+	This cut down development environment has been created specifically for Windows users.
+	* devkitARM r45
+	* gcc 4.9.2
+	* Qt 5.6
+	* perl 5.8.6
+## Usage ##
+
+	Extract 'ProxSpace' to a location on drive without spaces.
+		For example C:\Proxspace or D:\projects\public\proxmark\proxspace are ok whereas C:\My Documents\My Projects\proxspace is not.
+
+	Run 'runme.bat'
+	To get the Proxmark III repository you wish to compile.
+	To build the project type 'make clean && make all'.
+	To run the Proxmark III client type './client/proxmark3.exe COM1' where COM1 is the USB port of the Proxmark III.
+	To check your firmware revision on the Proxmark III type 'hw ver'.
+	To get basic help type 'help'. Or for help on a set of sub commands type the command followed by help. eg. 'hf mf help'
+	To exit type 'exit'.
+
+## Firmware upgrading the Proxmark III ##
+
+	To upgrade the firmware on the Proxmark III:
+	Please note that more detail is available on the wiki: https://github.com/Proxmark/proxmark3/wiki
+
+	1. Attach the Proxmark III to a USB port on your computer.
+	3. To flash the BOOTROM run './client/flasher COM1 -b ./bootrom/obj/bootrom.elf'
+	4. To flash the FULLIMAGE run './client/flasher COM1 ./armsrc/obj/fullimage.elf'
+	5. Wait for the process to complete.