From 0b1b80942833c77d1881d1812e2332df42cac001 Mon Sep 17 00:00:00 2001 From: Purify <44551716+purifyyourhome@users.noreply.github.com> Date: Sun, 28 Oct 2018 23:53:28 -0400 Subject: [PATCH] Fixed some spelling mistakes in MS-DOS v2.0 source code --- v2.0/source/DEBASM.ASM | 6 +++--- v2.0/source/DEBCOM2.ASM | 2 +- v2.0/source/DISK.ASM | 12 ++++++------ v2.0/source/DOSSYM_v211.ASM | 2 +- v2.0/source/EDLIN.ASM | 16 ++++++++-------- v2.0/source/FC.ASM | 14 +++++++------- v2.0/source/FCB.ASM | 6 +++--- v2.0/source/FIND.ASM | 22 +++++++++++----------- v2.0/source/FORMAT.ASM | 14 +++++++------- v2.0/source/MSHEAD.ASM | 4 ++-- v2.0/source/PRINT.ASM | 4 ++-- v2.0/source/PRINT_v211.ASM | 4 ++-- v2.0/source/SKELIO.ASM | 36 ++++++++++++++++++------------------ v2.0/source/SYSCALL.ASM | 14 +++++++------- v2.0/source/TCODE.ASM | 4 ++-- 15 files changed, 80 insertions(+), 80 deletions(-) diff --git a/v2.0/source/DEBASM.ASM b/v2.0/source/DEBASM.ASM index a0fb0db..a857f77 100644 --- a/v2.0/source/DEBASM.ASM +++ b/v2.0/source/DEBASM.ASM @@ -130,7 +130,7 @@ FDX_OPER: XCHG AL,AH MOV WORD PTR [ASSEM1],AX ; -; aad and aam instrucions +; aad and aam instructions ; AA_OPER:INC BYTE PTR [ASSEM_CNT] ; @@ -404,7 +404,7 @@ ESC_OPER: SHL AL,CL JMP GROUPE ; -; 8087 arithmetic instuctions +; 8087 arithmetic instructions ; ; @@ -1261,4 +1261,4 @@ DB7: INC BYTE PTR [ASSEM_CNT] CODE ENDS END ASSEM - \ No newline at end of file + diff --git a/v2.0/source/DEBCOM2.ASM b/v2.0/source/DEBCOM2.ASM index a800d4b..fbad94a 100644 --- a/v2.0/source/DEBCOM2.ASM +++ b/v2.0/source/DEBCOM2.ASM @@ -471,7 +471,7 @@ CONTC: ; Re-entry point from breakpoint. Need to decrement instruction ; pointer so it points to location where breakpoint actually -; occured. +; occurred. BREAKFIX: PUSH BP diff --git a/v2.0/source/DISK.ASM b/v2.0/source/DISK.ASM index b1acd82..9f3cba0 100644 --- a/v2.0/source/DISK.ASM +++ b/v2.0/source/DISK.ASM @@ -632,7 +632,7 @@ ASSUME DS:NOTHING,ES:NOTHING ; Call BIOS to perform disk read ; Outputs: ; DI = CX on entry -; CX = Number of sectors unsuccessfully transfered +; CX = Number of sectors unsuccessfully transferred ; AX = Status word as returned by BIOS (error code in AL if error) ; Zero set if OK (from BIOS) ; Zero clear if error @@ -683,7 +683,7 @@ ASSUME DS:NOTHING,ES:NOTHING ; Call BIOS to perform disk read ; Outputs: ; DI = CX on entry -; CX = Number of sectors unsuccessfully transfered +; CX = Number of sectors unsuccessfully transferred ; AX = Status word as returned by BIOS (error code in AL if error) ; Zero set if OK (from BIOS) ; Zero clear if error @@ -848,7 +848,7 @@ ASSUME DS:DOSGROUP,ES:NOTHING ; Inputs: ; CX = Length of disk transfer in bytes ; ES:BP = Base of drive parameters -; [BYTSECPOS] = Byte position witin first sector +; [BYTSECPOS] = Byte position within first sector ; Outputs: ; [BYTCNT1] = Bytes to transfer in first sector ; [SECCNT] = No. of whole sectors to transfer @@ -1020,7 +1020,7 @@ RDLAST: LES SI,[THISFCB] MOV AX,[NEXTADD] MOV DI,AX - SUB AX,WORD PTR [DMAADD] ; Number of bytes transfered + SUB AX,WORD PTR [DMAADD] ; Number of bytes transferred XOR DX,DX MOV CX,ES:[SI.fcb_RECSIZ] DIV CX ; Number of records @@ -1028,7 +1028,7 @@ RDLAST: JZ FULLREC MOV BYTE PTR [DSKERR],1 OR DX,DX - JZ FULLREC ; If remainder 0, then full record transfered + JZ FULLREC ; If remainder 0, then full record transferred MOV BYTE PTR [DSKERR],3 ; Flag partial last record SUB CX,DX ; Bytes left in last record PUSH ES @@ -1299,4 +1299,4 @@ do_ext CODE ENDS END - \ No newline at end of file + diff --git a/v2.0/source/DOSSYM_v211.ASM b/v2.0/source/DOSSYM_v211.ASM index 106e115..957fe34 100644 --- a/v2.0/source/DOSSYM_v211.ASM +++ b/v2.0/source/DOSSYM_v211.ASM @@ -940,7 +940,7 @@ Dup_PDB EQU 85 ; 85 55 Rename EQU 86 ; 86 56 File_Times EQU 87 ; 87 57 AllocOper EQU 88 ; 88 58 -; Network extention system calls +; Network extension system calls GetExtendedError EQU 89 ; 89 59 CreateTempFile EQU 90 ; 90 5A CreateNewFile EQU 91 ; 91 5B diff --git a/v2.0/source/EDLIN.ASM b/v2.0/source/EDLIN.ASM index f795ac4..33abff8 100644 --- a/v2.0/source/EDLIN.ASM +++ b/v2.0/source/EDLIN.ASM @@ -8,7 +8,7 @@ ; V2.00 9/13/82 M.A. Ulloa ; ; Modified to use Pathnames in command line file ; ; specification, modified REPLACE to use an empty ; -; string intead of the old replace string when this ; +; string instead of the old replace string when this ; ; is missing, and search and replace now start from ; ; first line of buffer (like old version of EDLIN) ; ; instead than current+1 line. Also added the U and ; @@ -44,7 +44,7 @@ ; ; ; 10/15/82 Rev. 4 M.A. Ulloa ; ; Param4 if specified must be an absolute number that ; -; reprecents the count. ; +; represents the count. ; ; ; ; 10/18/82 Rev. 5 M.A. Ulloa ; ; Fixed problem with trying to edit files with the ; @@ -84,7 +84,7 @@ ; ; ; ; ; 7/23/83 Rev. 14 N.Panners ; -; Split EDLIN into two seperate modules to ; +; Split EDLIN into two separate modules to ; ; allow assembly of sources on an IBM PC ; ; EDLIN and EDLPROC ; ; ; @@ -181,7 +181,7 @@ DATA SEGMENT PUBLIC WORD PUBLIC LSTNUM,SRCHCNT,POINTER,START,ENDTXT,USER_DRIVE ;-----------------------------------------------------------------------; -; Be carefull when adding parameters, they have to follow the +; Be careful when adding parameters, they have to follow the ; order in which they apperar here. (this is a table, ergo it ; is indexed thru a pointer, and random additions will cause the ; wrong item to be accessed). Also param4 is known to be the @@ -820,8 +820,8 @@ COMTAB DB "QTCMWASRDLPIE;",13 NUMCOM EQU $-COMTAB ;-----------------------------------------------------------------------; -; Carefull changing the order of the next two tables. They are -; linked and chnges should be be to both. +; Careful changing the order of the next two tables. They are +; linked and changes should be be to both. TABLE DW NOCOM ;No command--edit line DW NOCOM @@ -1171,7 +1171,7 @@ DISPLAY: ; SI = Pointer to text buffer ; DI = No. of lines ; Function: -; Ouputs specified no. of line to terminal, each +; Outputs specified no. of line to terminal, each ; with leading line number. ; Outputs: ; BX = Last line output. @@ -1843,4 +1843,4 @@ DELBAK: CODE ENDS END EDLIN - \ No newline at end of file + diff --git a/v2.0/source/FC.ASM b/v2.0/source/FC.ASM index 21ed991..7eb9051 100644 --- a/v2.0/source/FC.ASM +++ b/v2.0/source/FC.ASM @@ -141,7 +141,7 @@ LF equ 0ah ;-----------------------------------------------------------------------; ; Offsets to buffer structure -; For text comparations: +; For text comparisons: fname equ 0 ;file name ptr fname_len equ 2 ;file name length @@ -154,7 +154,7 @@ dat_end equ 14 ;ptr to last char of the buffer buf_end equ 16 ;pointer to the end of the buffer buf equ 18 ;pointer to the buffer -; For binary comparations: +; For binary comparisons: by_read equ 6 ;bytes read into buffer @@ -181,7 +181,7 @@ const segment public word make db "MAUlloa/Microsoft/V10" rev db "2" -;----- CAREFULL WITH PRESERVING THE ORDER OF THE TABLE ----- +;----- CAREFUL WITH PRESERVING THE ORDER OF THE TABLE ----- opt_tbl equ $ ;option table flg_b db FALSE @@ -208,7 +208,7 @@ bend db 0 ;binary end of file flag, 0= none yet, ; 1= file 1 ended, 2= file 2 ended base dd 0 ;base address of files for binary - ; comparations + ; comparisons bhead_flg db false ;true if heading for binary comp. ; has been printed already. @@ -786,7 +786,7 @@ go_quit: page ;-----------------------------------------------------------------------; -; CAPIALIZES THE CHARACTER IN AL ; +; CAPITALIZES THE CHARACTER IN AL ; ; ; ; entry: ; ; AL has the character to Capitalize ; @@ -891,7 +891,7 @@ sc3: ; Print a binary difference ; ; ; ; entry: ; -; AX,BX file address of diference ; +; AX,BX file address of difference ; ; SI pointer to one past byte in buffer1 ; ; DI pointer to one past byte in buffer2 ; ; ; @@ -1681,4 +1681,4 @@ stack ends end start - \ No newline at end of file + diff --git a/v2.0/source/FCB.ASM b/v2.0/source/FCB.ASM index 11528f7..d81077c 100644 --- a/v2.0/source/FCB.ASM +++ b/v2.0/source/FCB.ASM @@ -135,7 +135,7 @@ NOSTAR: IF KANJI CALL TESTKANJ JZ NOTDUAL3 - JCXZ BNDERR ; Attempt to straddle boundry + JCXZ BNDERR ; Attempt to straddle boundary MOVSB ; Transfer second byte DEC CX JMP SHORT NOTDUAL3 @@ -372,7 +372,7 @@ STOLET: JZ MOVLP ;No LODSB ;Get second byte DEC CX - JZ BOUNDERR ;Attempt to cross boundry + JZ BOUNDERR ;Attempt to cross boundary STOSB MOVLP: LOOP MOVCHK @@ -391,7 +391,7 @@ STOLET2: LODSB ;Get second byte DEC CX JNZ DOSTORE -BOUNDERR: ;Attempt to cross boundry +BOUNDERR: ;Attempt to cross boundary STC return diff --git a/v2.0/source/FIND.ASM b/v2.0/source/FIND.ASM index 7c82768..2e318ff 100644 --- a/v2.0/source/FIND.ASM +++ b/v2.0/source/FIND.ASM @@ -48,7 +48,7 @@ TRUE equ NOT FALSE KANJI equ FALSE ;set to true is kanji vers. ;--------------------------------------------------------------------; -; FIND program following the standart UNIX operation. ; +; FIND program following the standard UNIX operation. ; ; ; ; FORMAT: ; ; find {option} string {filename {filename} {...}} ; @@ -56,7 +56,7 @@ KANJI equ FALSE ;set to true is kanji vers. ; NOTES: ; ; 1) String arguments HAVE to be enclosed ; ; in double quotes. (Two double quotes if a ; -; doble quote is to be included). Only ONE ; +; double quote is to be included). Only ONE ; ; string argument is presently allowed. ; ; ; ; 2) Options are available: ; @@ -76,9 +76,9 @@ KANJI equ FALSE ;set to true is kanji vers. ; 4) The maximum line size is determined by ; ; buffer size. Bigger lines will bomb the program. ; ; ; -; 5) If no file name is given then it will asssume ; -; the input is comming from the Standart Input. NO ; -; errors are reported when reading from Standart Input. ; +; 5) If no file name is given then it will assume ; +; the input is coming from the Standard Input. NO ; +; errors are reported when reading from Standard Input. ; ;--------------------------------------------------------------------; code segment public @@ -386,7 +386,7 @@ regular: ; - Pointer to the next command in the command line ; - Pointer to the program segment prefix (to be loaded into ; DS to access the command line. -; if the imput is from the standart input then NONE of it will be +; if the imput is from the standard input then NONE of it will be ; in the stack. go_match: @@ -544,7 +544,7 @@ try_again_opt: ;Note: at this point the stack contains (top to bottom) ; - Stuff mentioned before ; -; plus, BP points to begginig of the current line, BX has the length +; plus, BP points to beginning of the current line, BX has the length ;of the current line including the CRLF, and DX the adjusted length of ;the string argument. @@ -570,8 +570,8 @@ no_n_flg: ; The scanning routines have detected that the buffer does not ;contain a full line any more. More lines have to be read into the ;buffer. But first perform a seek on the file in order to re-read -;the non-complete line into the begining of the buffer. -; Uppon entry BP contains points to the begining of the non-complete +;the non-complete line into the beginning of the buffer. +; Upon entry BP contains points to the beginning of the non-complete ;line, and BX has the number of characters left in the buffer. ; The Stack contains (top to bottom): ; - Pointer to the next command in the command line @@ -781,7 +781,7 @@ prt_file_name: ;--------------------------------------------------------------------; -; Print an error message to the Standart error ; +; Print an error message to the Standard error ; ; ; ; entry: ; ; DX has the pointer to the message ; @@ -929,4 +929,4 @@ stack_top equ $ stack ends end start - \ No newline at end of file + diff --git a/v2.0/source/FORMAT.ASM b/v2.0/source/FORMAT.ASM index 694857b..7a92197 100644 --- a/v2.0/source/FORMAT.ASM +++ b/v2.0/source/FORMAT.ASM @@ -346,8 +346,8 @@ CMPTRKS: BAD100: ; BX is the first bad sector #, SECTORS is the number of bad sectors starting ; at BX. This needs to be converted to clusters. The start sector number may -; need to be rounded down to a cluster boundry, the end sector may need to be -; rounded up to a cluster boundry. Know BX >= STARTSECTOR +; need to be rounded down to a cluster boundary, the end sector may need to be +; rounded up to a cluster boundary. Know BX >= STARTSECTOR SUB BX,STARTSECTOR ; BX is now DATA area relative MOV CX,BX ADD CX,SECTORS @@ -451,8 +451,8 @@ FATWRT: JNC SYSOK MOV DX,OFFSET NOTSYS ;Can't transfer a system CALL PRINT - MOV WORD PTR SYSSIZ+2,0 ;No system transfered - MOV WORD PTR SYSSIZ,0 ;No system transfered + MOV WORD PTR SYSSIZ+2,0 ;No system transferred + MOV WORD PTR SYSSIZ,0 ;No system transferred JMP SHORT STATUS SYSOK: @@ -549,7 +549,7 @@ UNSCALE: ;****************************************** ; Calculate the size in bytes of the system rounded up to sector and -; cluster boundries, Answer in SYSSIZ +; cluster boundaries, Answer in SYSSIZ GETSIZE: MOV AX,WORD PTR BIOSSIZB ;And calculate the system size @@ -577,7 +577,7 @@ FNDSIZ0: SUB DX,CLUSSIZ NEG DX ADD AX,DX ; Round up sector count to cluster - ; boundry + ; boundary ONCLUS: MUL SECSIZ ; Turn it back into bytes ADD WORD PTR SYSSIZ,AX @@ -1624,4 +1624,4 @@ STACK LABEL BYTE CODE ENDS END START - \ No newline at end of file + diff --git a/v2.0/source/MSHEAD.ASM b/v2.0/source/MSHEAD.ASM index 108197d..2b23c33 100644 --- a/v2.0/source/MSHEAD.ASM +++ b/v2.0/source/MSHEAD.ASM @@ -65,7 +65,7 @@ PAGE ; 04/23/82 Added GETDSKPTDL as call 50, similar to GETFATPT(DL), returns ; address of DPB ; 04/29/82 Mod to WRTDEV to look for ^C or ^S at console input when -; writting to console device via file I/O. Added a console +; writing to console device via file I/O. Added a console ; output attribute to devices. ; 04/30/82 Call to en/dis able ^C check in dispatcher Call 51 ; 04/30/82 Code to allow assignment of func 1-12 to disk files as well @@ -195,4 +195,4 @@ START SEGMENT BYTE PUBLIC 'START' JMP DOSINIT START ENDS - \ No newline at end of file + diff --git a/v2.0/source/PRINT.ASM b/v2.0/source/PRINT.ASM index dd58735..a11e18e 100644 --- a/v2.0/source/PRINT.ASM +++ b/v2.0/source/PRINT.ASM @@ -41,7 +41,7 @@ AKPORT EQU 20H ;Interrupt Acknowledge port ENDIF ;The following values have to do with the ERRCNT variable and the -; CNTMES message. The values define levels at wich it is assumed +; CNTMES message. The values define levels at which it is assumed ; an off-line error exists. ERRCNT1 defines the value of ERRCNT above ; which the CNTMES message is printed by the transient. ERRCNT2 ; defines the value of ERRCNT above which the resident will give up @@ -1642,4 +1642,4 @@ move_char endp CODE ENDS END START - \ No newline at end of file + diff --git a/v2.0/source/PRINT_v211.ASM b/v2.0/source/PRINT_v211.ASM index 4585af7..2e6748a 100644 --- a/v2.0/source/PRINT_v211.ASM +++ b/v2.0/source/PRINT_v211.ASM @@ -41,7 +41,7 @@ AKPORT EQU 20H ;Interrupt Acknowledge port ENDIF ;The following values have to do with the ERRCNT variable and the -; CNTMES message. The values define levels at wich it is assumed +; CNTMES message. The values define levels at which it is assumed ; an off-line error exists. ERRCNT1 defines the value of ERRCNT above ; which the CNTMES message is printed by the transient. ERRCNT2 ; defines the value of ERRCNT above which the resident will give up @@ -1642,4 +1642,4 @@ move_char endp CODE ENDS END START - \ No newline at end of file + diff --git a/v2.0/source/SKELIO.ASM b/v2.0/source/SKELIO.ASM index b2ff8e3..2c60930 100644 --- a/v2.0/source/SKELIO.ASM +++ b/v2.0/source/SKELIO.ASM @@ -48,13 +48,13 @@ INIT: JMP HWINIT ;-----------------------------------------------+ ; DWORD pointer to next device | 1 word offset. -; (-1,-1 if last device) | 1 word segement. +; (-1,-1 if last device) | 1 word segment. ;-----------------------------------------------+ ; Device attribute WORD ; 1 word. -; Bit 15 = 1 for chacter devices. ; +; Bit 15 = 1 for character devices. ; ; 0 for Block devices. ; ; ; -; Charcter devices. (Bit 15=1) ; +; Character devices. (Bit 15=1) ; ; Bit 0 = 1 current sti device. ; ; Bit 1 = 1 current sto device. ; ; Bit 2 = 1 current NUL device. ; @@ -231,7 +231,7 @@ CON_INT: JMP SHORT ENTRY ; -; Auxilary interrupt routine for processing I/O packets. +; Auxiliary interrupt routine for processing I/O packets. ; AUX_INT: @@ -314,7 +314,7 @@ CMDERR: MOV AL,3 ;Set unknown command error #. ; AL contains actual error code. ; ; Error # 0 = Write Protect violation. -; 1 = Unkown unit. +; 1 = Unknown unit. ; 2 = Drive not ready. ; 3 = Unknown command in I/O packet. ; 4 = CRC error. @@ -526,7 +526,7 @@ ST1: CMP AL,ESC ;See if this the first character is ESC. ; ST2: CMP AL,'[' ;See if a valide state two. - JNZ OUTCHR ;No, treat as regular charcter + JNZ OUTCHR ;No, treat as regular character MOV BX,OFFSET PARMS ;Yes, get parameter pointer. MOV WORD PTR [PRMPNT],BX ;Setup in pointer index. MOV WORD PTR [BX],0 ;Clear first entry. @@ -649,7 +649,7 @@ CUP: CALL GETONE ;Get X position. ED: CALL GETPARM ;Get trinary command type. MOV BL,'b' - DEC AL ;See if erase from begining of screen. + DEC AL ;See if erase from beginning of screen. JZ ED1 ;Yes, perform ZDS function. MOV BL,'E' DEC AL ;See if erase from end of screen. @@ -663,7 +663,7 @@ ED1: JMP OUTESC EL: CALL GETPARM ;Get trinary command type. MOV BL,'o' - DEC AL ;See if erase from begining of line. + DEC AL ;See if erase from beginning of line. JZ EL1 ;Yes, perform ZDS function. MOV BL,'l' DEC AL ;See if erase whole line. @@ -725,12 +725,12 @@ PRN_WR1:LODS BYTE PTR ES:[SI];Get a data byte. RET PAGE - SUBTTL Auxilary I/O routines. + SUBTTL Auxiliary I/O routines. AUXCHAR DB 0 ;Temporary AUX ahead storage. ; -; Status routine for Auxilary port. +; Status routine for Auxiliary port. ; AISTAT: MOV AL,[AUXCHAR] @@ -748,7 +748,7 @@ AISTA9: MOV [AUXCHAR],AL RET ; -; Auxilary port read. +; Auxiliary port read. ; AIN: CALL AISTAT ;Get status and/or char. @@ -757,7 +757,7 @@ AIN: CALL AISTAT ;Get status and/or char. RET ; -; Write routine for Auxilary port. +; Write routine for Auxiliary port. ; AOUT: MOV CX,[ACON] @@ -767,7 +767,7 @@ AOUT: MOV CX,[ACON] RET ; -; Non-Destructive Auxilary read routine. +; Non-Destructive Auxiliary read routine. ; AUX_RDND: @@ -778,7 +778,7 @@ AUX_RDN2: JMP BUS_EXIT ; -; Destructive Auxilary read routine. +; Destructive Auxiliary read routine. ; AUX_READ: @@ -788,7 +788,7 @@ AUX_READ: JMP EXIT ; -; Auxilary clear type a head. +; Auxiliary clear type a head. ; AUX_CLR: @@ -796,14 +796,14 @@ AUX_CLR: JMP EXIT ; -; Auxilary write port status. +; Auxiliary write port status. ; AUX_WRST: JMP EXIT ; -; Auxilary write. +; Auxiliary write. ; AUX_WRIT: @@ -1374,4 +1374,4 @@ DOSSPOT LABEL WORD CODE ENDS END - \ No newline at end of file + diff --git a/v2.0/source/SYSCALL.ASM b/v2.0/source/SYSCALL.ASM index 02d38d8..b753ca8 100644 --- a/v2.0/source/SYSCALL.ASM +++ b/v2.0/source/SYSCALL.ASM @@ -167,7 +167,7 @@ PAGE ASSUME DS:NOTHING,ES:NOTHING ; Inputs: -; DS:DX Points to openned FCB +; DS:DX Points to opened FCB ; Function: ; Read next record from file to disk transfer address ; Returns: @@ -184,7 +184,7 @@ ASSUME DS:NOTHING,ES:NOTHING ASSUME DS:NOTHING,ES:NOTHING ; Inputs: -; DS:DX Points to openned FCB +; DS:DX Points to opened FCB ; Function: ; Write next record to file from disk transfer address ; Returns: @@ -204,7 +204,7 @@ FINSEQ: ASSUME DS:NOTHING,ES:NOTHING ; Inputs: -; DS:DX Points to openned FCB +; DS:DX Points to opened FCB ; Function: ; Read record addressed by random record field from file to ; disk transfer address @@ -222,7 +222,7 @@ ASSUME DS:NOTHING,ES:NOTHING ASSUME DS:NOTHING,ES:NOTHING ; Inputs: -; DS:DX Points to openned FCB +; DS:DX Points to opened FCB ; Function: ; Write record addressed by random record field to file from ; disk transfer address @@ -239,7 +239,7 @@ ASSUME DS:NOTHING,ES:NOTHING ASSUME DS:NOTHING,ES:NOTHING ; Inputs: -; DS:DX Points to openned FCB +; DS:DX Points to opened FCB ; CX = Record count ; Function: ; Read CX records starting at random record field from file @@ -259,7 +259,7 @@ ASSUME DS:NOTHING,ES:NOTHING ASSUME DS:NOTHING,ES:NOTHING ; Inputs: -; DS:DX Points to openned FCB +; DS:DX Points to opened FCB ; CX = Record count ; Function: ; Write CX records starting at random record field to file @@ -746,4 +746,4 @@ do_ext CODE ENDS END - \ No newline at end of file + diff --git a/v2.0/source/TCODE.ASM b/v2.0/source/TCODE.ASM index dfe6ca5..907957d 100644 --- a/v2.0/source/TCODE.ASM +++ b/v2.0/source/TCODE.ASM @@ -219,7 +219,7 @@ REGCOM: REP MOVSB ; Transfer it to the cooked buffer JMP DOCOM -; All batch proccessing has DS set to segment of resident portion +; All batch processing has DS set to segment of resident portion ASSUME DS:RESGROUP,ES:TRANGROUP NEEDENV: @@ -1085,4 +1085,4 @@ NOSINGP2: TRANCODE ENDS END - \ No newline at end of file +